GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-08-12 21:19:03 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

update tooltips for width & spacing

Browse Source
This commit is contained in:
remi durand 2021-05-28 15:42:58 +02:00
parent dfc2689cb3
commit 7851f6e875
1 changed files with 28 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
src/libslic3r/PrintConfig.cpp
View File

@ -829,7 +829,8 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for external perimeters. "
"If left zero, default extrusion width will be used if set, otherwise 1.05 x nozzle diameter will be used. "
"If expressed as percentage (for example 112.5%), it will be computed over nozzle diameter.");
"If expressed as percentage (for example 112.5%), it will be computed over nozzle diameter.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -842,7 +843,8 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("External perimeters spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like the External perimeters width, but this value is the distance between the edge and the 'frontier' to the next perimeter."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
"\nSetting the spacing will deactivate the width setting, and vice versa.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -1159,7 +1161,8 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Set this to a non-zero value to allow a manual extrusion width. "
"If left to zero, Slic3r derives extrusion widths from the nozzle diameter "
"(see the tooltips for perimeter extrusion width, infill extrusion width etc). "
"If expressed as percentage (for example: 105%), it will be computed over nozzle diameter.");
"If expressed as percentage (for example: 105%), it will be computed over nozzle diameter.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -1171,8 +1174,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("extrusion_spacing", coFloatOrPercent);
def->label = L("Default extrusion spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like Default extrusion width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
def->tooltip = L("Like Default extrusion width but spacing is the distance between two lines (as they overlap a bit, it's not the same).") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -1743,7 +1746,8 @@ void PrintConfigDef::init_fff_params()
"You can use this to force fatter extrudates for better adhesion. If expressed "
"as percentage (for example 140%) it will be computed over the nozzle diameter "
"of the nozzle used for the type of extrusion. "
"If set to zero, it will use the default extrusion width.");
"If set to zero, it will use the default extrusion width."
"\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -1756,8 +1760,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("First layer");
def->full_label = L("First layer spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like First layer width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
def->tooltip = L("Like First layer width but spacing is the distance between two lines (as they overlap a bit, it's not the same).") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -2138,7 +2142,8 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for infill. "
"If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"You may want to use fatter extrudates to speed up the infill and make your parts stronger. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.");
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -2151,8 +2156,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("Infill");
def->full_label = L("Infill spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like First layer width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
def->tooltip = L("Like First layer width but spacing is the distance between two lines (as they overlap a bit, it's not the same).") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -2874,7 +2879,8 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. "
"If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"If expressed as percentage (for example 105%) it will be computed over nozzle diameter.");
"If expressed as percentage (for example 105%) it will be computed over nozzle diameter.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->aliases = { "perimeters_extrusion_width" };
def->min = 0;
@ -2887,8 +2893,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("Perimeters");
def->full_label = ("Perimeter spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like Perimeter width but spacing is the distance between two perimeter lines (as they overlap a bit, it's not the same)."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
def->tooltip = L("Like Perimeter width but spacing is the distance between two perimeter lines (as they overlap a bit, it's not the same).") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height.");
def->sidetext = L("mm or %");
def->aliases = { "perimeters_extrusion_width" };
def->min = 0;
@ -3398,7 +3404,8 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::width;
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. "
"If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.");
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -3411,8 +3418,8 @@ void PrintConfigDef::init_fff_params()
def->label = L("Solid spacing");
def->full_label = ("Solid infill spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like Solid infill width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
def->tooltip = L("Like Solid infill width but spacing is the distance between two lines (as they overlap a bit, it's not the same).") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -3976,7 +3983,8 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. "
"You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. "
"If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. "
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.");
"If expressed as percentage (for example 110%) it will be computed over nozzle diameter.") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;
@ -3988,8 +3996,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("top_infill_extrusion_spacing", coFloatOrPercent);
def->label = L("Top solid spacing");
def->category = OptionCategory::width;
def->tooltip = L("Like Top solid infill width but spacing is the distance between two lines (as they overlap a bit, it's not the same)."
"\nSetting the spacing will deactivate the width setting, and vice versa.");
def->tooltip = L("Like Top solid infill width but spacing is the distance between two lines (as they overlap a bit, it's not the same).") + std::string("\n") +
L("You can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height.");
def->sidetext = L("mm or %");
def->ratio_over = "nozzle_diameter";
def->min = 0;