GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-08-14 05:45:52 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Some tooltip updates (thank you @blex-max for the help)

Browse Source 
supermerill/SuperSlicer#2097
This commit is contained in:
supermerill 2021-12-21 13:19:54 +01:00
parent 7b6b4b0871
commit 8a0e9adcd4
1 changed files with 33 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

61
src/libslic3r/PrintConfig.cpp
View File

@ -138,7 +138,7 @@ void PrintConfigDef::init_common_params()
def = this->add("slice_closing_radius", coFloat);
def->label = L("Slice gap closing radius");
def->category = OptionCategory::slicing;
def->tooltip = L("Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. "
def->tooltip = L("Fill cracks smaller than 2x gap closing radius during the triangle mesh slicing. "
"The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low.");
def->sidetext = L("mm");
def->min = 0;
@ -223,7 +223,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Allow empty layers");
def->full_label = L("Allow empty layers");
def->category = OptionCategory::slicing;
def->tooltip = L("Do not prevent the gcode builder to trigger an exception if a full layer is empty and so the print will have to start from thin air afterward.");
def->tooltip = L("Prevent the gcode builder from triggering an exception if a full layer is empty, and allow the print to start from thin air afterward.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(false));
@ -240,7 +240,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Don't avoid crossing on 1st layer");
def->full_label = L("Don't avoid crossing on 1st layer");
def->category = OptionCategory::perimeter;
def->tooltip = L("Do not use the 'Avoid crossing perimeters' on the first layer.");
def->tooltip = L("Disable 'Avoid crossing perimeters' for the first layer.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(true));
@ -249,7 +249,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::perimeter;
def->tooltip = L("The maximum detour length for avoid crossing perimeters. "
"If the detour is longer than this value, avoid crossing perimeters is not applied for this travel path. "
"Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path.");
"Detour length can be specified either as an absolute value or as percentage (for example 50%) of a direct travel path.");
def->sidetext = L("mm or % (zero to disable)");
def->min = 0;
def->mode = comExpert;
@ -259,7 +259,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Other layers");
def->category = OptionCategory::filament;
def->tooltip = L("Bed temperature for layers after the first one. "
"Set this to zero to disable bed temperature control commands in the output.");
"Set zero to disable bed temperature control commands in the output.");
def->sidetext = L("°C");
def->full_label = L("Bed temperature");
def->sidetext = L("°C");
@ -997,7 +997,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::speed;
def->tooltip = L("This separate setting will affect the speed of external perimeters (the visible ones). "
"If expressed as percentage (for example: 80%) it will be calculated "
"on the perimeters speed setting above. Set to zero for auto.");
"on the perimeters speed setting above. Set zero for auto.");
def->sidetext = L("mm/s or %");
def->ratio_over = "perimeter_speed";
def->min = 0;
@ -1355,7 +1355,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::filament;
def->tooltip = L("Maximum speed allowed for this filament. Limits the maximum "
"speed of a print to the minimum of the print speed and the filament speed. "
"Set to zero for no limit.");
"Set zero for no limit.");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
@ -1367,7 +1367,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::filament;
def->tooltip = L("Maximum volumetric speed allowed for this filament. Limits the maximum volumetric "
"speed of a print to the minimum of print and filament volumetric speed. "
"Set to zero for no limit.");
"Set zero for no limit.");
def->sidetext = L("mm³/s");
def->min = 0;
def->mode = comAdvanced;
@ -1920,7 +1920,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("First layer");
def->full_label = L("First layer bed temperature");
def->category = OptionCategory::filament;
def->tooltip = L("Heated build plate temperature for the first layer. Set this to zero to disable "
def->tooltip = L("Heated build plate temperature for the first layer. Set zero to disable "
"bed temperature control commands in the output.");
def->sidetext = L("°C");
def->max = 0;
@ -2020,7 +2020,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("First layer nozzle temperature");
def->category = OptionCategory::filament;
def->tooltip = L("Extruder nozzle temperature for first layer. If you want to control temperature manually "
"during print, set this to zero to disable temperature control commands in the output file.");
"during print, set zero to disable temperature control commands in the output file.");
def->sidetext = L("°C");
def->min = 0;
def->max = max_temp;
@ -2439,7 +2439,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Sparse");
def->full_label = L("Sparse infill speed");
def->category = OptionCategory::speed;
def->tooltip = L("Speed for printing the internal fill. Set to zero for auto.");
def->tooltip = L("Speed for printing the internal fill. Set zero for auto.");
def->sidetext = L("mm/s");
def->aliases = { "print_feed_rate", "infill_feed_rate" };
def->min = 0;
@ -2836,7 +2836,10 @@ void PrintConfigDef::init_fff_params()
def = this->add("max_speed_reduction", coPercents);
def->label = L("Max speed reduction");
def->category = OptionCategory::speed;
def->tooltip = L("Set to 90% if you don't want the speed to be reduced by more than 90%.");
def->tooltip = L("This setting control by how much the speed can be reduced to increase the layer time."
" It's a maximum reduction, so a lower value makes the minimum speed higher."
" Set to 90% if you don't want the speed to go below 10% of the current speed."
"\nSet zero to disable");
def->sidetext = L("%");
def->min = 0;
def->max = 100;
@ -3242,7 +3245,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Internal");
def->full_label = L("Internal perimeters speed");
def->category = OptionCategory::speed;
def->tooltip = L("Speed for perimeters (contours, aka vertical shells). Set to zero for auto.");
def->tooltip = L("Speed for perimeters (contours, aka vertical shells). Set zero for auto.");
def->sidetext = L("mm/s");
def->aliases = { "perimeter_feed_rate" };
def->min = 0;
@ -3622,7 +3625,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("skirt_distance", coFloat);
def->label = L("Distance from object");
def->category = OptionCategory::skirtBrim;
def->tooltip = L("Distance between skirt and object(s). Set this to zero to attach the skirt "
def->tooltip = L("Distance between skirt and object(s). Set zero to attach the skirt "
"to the object(s) and get a brim for better adhesion.");
def->sidetext = L("mm");
def->min = 0;
@ -3666,7 +3669,7 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("Skirt Loops");
def->category = OptionCategory::skirtBrim;
def->tooltip = L("Number of loops for the skirt. If the Minimum Extrusion Length option is set, "
"the number of loops might be greater than the one configured here. Set this to zero "
"the number of loops might be greater than the one configured here. Set zero "
"to disable skirt completely.");
def->min = 0;
def->mode = comSimple;
@ -3691,7 +3694,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::speed;
def->tooltip = L("This separate setting will affect the speed of perimeters having radius <= 6.5mm "
"(usually holes). If expressed as percentage (for example: 80%) it will be calculated "
"on the perimeters speed setting above. Set to zero for auto.");
"on the perimeters speed setting above. Set zero for auto.");
def->sidetext = L("mm/s or %");
def->ratio_over = "perimeter_speed";
def->min = 0;
@ -3851,7 +3854,7 @@ void PrintConfigDef::init_fff_params()
def->category = OptionCategory::speed;
def->tooltip = L("Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default infill speed."
" Set to zero for auto.");
" Set zero for auto.");
def->sidetext = L("mm/s or %");
def->ratio_over = "infill_speed";
def->aliases = { "solid_infill_feed_rate" };
@ -4008,14 +4011,16 @@ void PrintConfigDef::init_fff_params()
def->sidetext = L("perimeters");
def->sidetext_width = 20;
def->category = OptionCategory::perimeter;
def->tooltip = L("When you have a medium/hight number of top/bottom solid layers, and a low/medium of perimeters,"
" then it have to put some solid infill inside the part to have enough solid layers."
"\nBy setting this to something higher than 0, you can remove this 'inside filling'."
" This number allow to keep some if there is a low number of perimeter over the void."
"\nIf this setting is equal or higher than the top/bottom solid layer count, it won't evict anything."
"\nIf this setting is set to 1, it will evict all solid fill are are only over perimeters."
def->tooltip = L("In sloping areas, when you have a number of top / bottom solid layers and few perimeters, "
" it may be necessary to put some solid infill above/below the perimeters to fulfill the top/bottom layers criteria."
"\nBy setting this to something higher than 0, you can control this behaviour, which might be desirable if "
"\nundesirable solid infill is being generated on slopes."
"\nThe number set here indicates the number of layers between the inside of the part and the air"
" at and beyond which solid infill should no longer be added above/below. If this setting is equal or higher than "
" the top/bottom solid layer count, it won't do anything. If this setting is set to 1, it will evict "
" all solid fill above/below perimeters. "
"\nSet zero to disable."
"\n!! ensure_vertical_shell_thickness may be erased by this setting !! You may want to deactivate at least one of the two.");
"\n!! ensure_vertical_shell_thickness may be erased by this setting !!.");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(2));
@ -4267,7 +4272,7 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Support material will not be generated for overhangs whose slope angle "
"(90° = vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic detection "
"that you can print without support material. Set zero for automatic detection "
"(recommended).");
def->sidetext = L("°");
def->min = 0;
@ -4287,7 +4292,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Other layers");
def->full_label = L("Temperature");
def->category = OptionCategory::filament;
def->tooltip = L("Extruder nozzle temperature for layers after the first one. Set this to zero to disable "
def->tooltip = L("Extruder nozzle temperature for layers after the first one. Set zero to disable "
"temperature control commands in the output G-code.");
def->sidetext = L("°C");
def->full_label = L("Nozzle temperature");
@ -4464,7 +4469,7 @@ void PrintConfigDef::init_fff_params()
"external layers and not to their internal solid layers). You may want "
"to slow down this to get a nicer surface finish. This can be expressed "
"as a percentage (for example: 80%) over the solid infill speed above. "
"Set to zero for auto.");
"Set zero for auto.");
def->sidetext = L("mm/s or %");
def->ratio_over = "solid_infill_speed";
def->min = 0;
@ -5527,7 +5532,7 @@ void PrintConfigDef::init_sla_params()
def = this->add("pad_wall_height", coFloat);
def->label = L("Pad wall height");
def->tooltip = L("Defines the pad cavity depth. Set to zero to disable the cavity. "
def->tooltip = L("Defines the pad cavity depth. Set zero to disable the cavity. "
"Be careful when enabling this feature, as some resins may "
"produce an extreme suction effect inside the cavity, "
"which makes peeling the print off the vat foil difficult.");