mirror of
https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git
synced 2025-08-12 21:39:07 +08:00
Add max_literal to setting def, to set the threshold for popup warning for float% fields
allow max, min and % of nozzle delete % check from ConfigManipulation supermerill/SuperSlicer#1774
This commit is contained in:
supermerill
parent
41c0fb19d7
commit
a6802bc728
@ -47,6 +47,7 @@ each parameter is separated by ':'
|
||||
* full_width: to tell to create a field that span the full width.
|
||||
* sidetext$STR: the suffix at the right of the widget (like 'mm').
|
||||
* sidetext_width$INT: the suffix label length (override the group one). -1 for auto.
|
||||
* max_literal$INT[%]: if the user enter a value higher than that and it's a 'float or percent' field, then emit a pop-up to question if he doesn't forgot a '%'. If negative, it check if the value isn't lower than the absolute max_literal, instead of greater. If there is a '%' after the value, then it's multiplied by the biggest nozzle diameter.
|
||||
* simple|advanced|expert: add one of these to modify the mode in which this setting appear.
|
||||
* width$INT: change the width of the field. Shouod work on most type of settings.
|
||||
* height$INT: change the height of the field. Don't works with every type of setting (mostly multilne text). Set to -1 to 'disable'.
|
||||
|
||||
@ -178,7 +178,7 @@ group:Skirt
|
||||
setting:skirts
|
||||
line:Distance
|
||||
setting:skirt_distance
|
||||
setting:label$from brim:sidetext$else from object:skirt_distance_from_brim
|
||||
setting:label$from brim:skirt_distance_from_brim
|
||||
end_line
|
||||
setting:skirt_height
|
||||
setting:draft_shield
|
||||
|
||||
@ -1840,6 +1840,8 @@ public:
|
||||
// By setting min=0, only nonnegative input is allowed.
|
||||
double min = INT_MIN;
|
||||
double max = INT_MAX;
|
||||
// To check if it's not a typo and a % is missing
|
||||
FloatOrPercent max_literal = FloatOrPercent{ 0., false };
|
||||
// max precision after the dot, only for display
|
||||
int precision = 6;
|
||||
ConfigOptionMode mode = comSimple;
|
||||
|
||||
@ -320,6 +320,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/s² or %");
|
||||
def->ratio_over = "default_acceleration";
|
||||
def->min = 0;
|
||||
def->max_literal = { -220, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0,false));
|
||||
|
||||
@ -663,6 +664,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/s² or %");
|
||||
def->ratio_over = "machine_max_acceleration_X";
|
||||
def->min = 0;
|
||||
def->max_literal = { -200, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0,false));
|
||||
|
||||
@ -855,6 +857,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/%");
|
||||
def->ratio_over = "perimeter_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 50, true };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(150, true));
|
||||
|
||||
@ -866,6 +869,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/%");
|
||||
def->ratio_over = "external_perimeter_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 50, true };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(200, true));
|
||||
|
||||
@ -881,6 +885,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -897,6 +902,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -1246,6 +1252,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -1260,6 +1267,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -1842,6 +1850,7 @@ void PrintConfigDef::init_fff_params()
|
||||
" A value too low will make your extruder eat the filament.");
|
||||
def->ratio_over = "top_infill_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 1, true };
|
||||
def->mode = comExpert;
|
||||
def->sidetext = L("mm/%");
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
|
||||
@ -1869,6 +1878,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/s² or %");
|
||||
def->ratio_over = "default_acceleration";
|
||||
def->min = 0;
|
||||
def->max_literal = { -200, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
|
||||
|
||||
@ -1898,6 +1908,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -1913,6 +1924,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -1928,6 +1940,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max_literal = { 20, false };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(75, true));
|
||||
|
||||
@ -2150,6 +2163,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/s² or %");
|
||||
def->ratio_over = "default_acceleration";
|
||||
def->min = 0;
|
||||
def->max_literal = { -200, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0,false));
|
||||
|
||||
@ -2202,6 +2216,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = def_infill_anchor_min->ratio_over;
|
||||
def->gui_type = def_infill_anchor_min->gui_type;
|
||||
def->enum_values = def_infill_anchor_min->enum_values;
|
||||
def->max_literal = def_infill_anchor_min->max_literal;
|
||||
def->enum_labels.push_back(L("0 (Simple connect)"));
|
||||
def->enum_labels.push_back("1 mm");
|
||||
def->enum_labels.push_back("2 mm");
|
||||
@ -2332,6 +2347,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -2347,6 +2363,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -2376,6 +2393,8 @@ void PrintConfigDef::init_fff_params()
|
||||
"as percentage (example: 15%) it is calculated over perimeter extrusion width.");
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "perimeter_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 1, true };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(25, true));
|
||||
|
||||
@ -2744,6 +2763,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max_literal = { 10, false };
|
||||
def->mode = comSimple;
|
||||
def->is_vector_extruder = true;
|
||||
def->set_default_value(new ConfigOptionFloatsOrPercents{ FloatOrPercent{ 75, true} });
|
||||
@ -2836,6 +2856,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max_literal = { 5, false };
|
||||
def->mode = comSimple;
|
||||
def->is_vector_extruder = true;
|
||||
def->set_default_value(new ConfigOptionFloatsOrPercents{ FloatOrPercent{ 5, true} });
|
||||
@ -2861,6 +2882,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "perimeter_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 15, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(200, true));
|
||||
|
||||
@ -3011,6 +3033,7 @@ void PrintConfigDef::init_fff_params()
|
||||
" Set to 0 to deactivate.");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max_literal = { 10, true };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(75, true));
|
||||
|
||||
@ -3030,6 +3053,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->tooltip = L("Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.");
|
||||
def->ratio_over = "perimeter_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 20, false };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(250, true));
|
||||
|
||||
@ -3085,6 +3109,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/s² or %");
|
||||
def->ratio_over = "default_acceleration";
|
||||
def->min = 0;
|
||||
def->max_literal = { -200, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0,false));
|
||||
|
||||
@ -3120,6 +3145,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->aliases = { "perimeters_extrusion_width" };
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -3135,6 +3161,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->aliases = { "perimeters_extrusion_width" };
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -3455,6 +3482,7 @@ void PrintConfigDef::init_fff_params()
|
||||
"\nCan be a mm or a % of the current extruder diameter.");
|
||||
def->sidetext = L("mm or %");
|
||||
def->min = 0;
|
||||
def->max_literal = { 5, false };
|
||||
def->mode = comExpert;
|
||||
def->is_vector_extruder = true;
|
||||
def->set_default_value(new ConfigOptionFloatsOrPercents{ FloatOrPercent{15,true} });
|
||||
@ -3528,6 +3556,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
|
||||
@ -3578,6 +3607,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max_literal = { 100, false };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(6, false));
|
||||
|
||||
@ -3592,6 +3622,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max_literal = { 500, false };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(20, false));
|
||||
|
||||
@ -3692,6 +3723,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -3707,6 +3739,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -3909,6 +3942,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "external_perimeter_extrusion_width";
|
||||
def->min = 0;
|
||||
def->max_literal = { 10, false};
|
||||
def->mode = comAdvanced;
|
||||
// Default is half the external perimeter width.
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
|
||||
@ -3960,6 +3994,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "top_infill_extrusion_width";
|
||||
def->sidetext = L("mm");
|
||||
def->min = 0;
|
||||
def->max_literal = { 20, true };
|
||||
def->mode = comAdvanced;
|
||||
def->aliases = { "support_material_contact_distance" };
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0.2, false));
|
||||
@ -3973,6 +4008,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "top_infill_extrusion_width";
|
||||
def->sidetext = L("mm");
|
||||
def->min = 0;
|
||||
def->max_literal = { 20, true };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0.2,false));
|
||||
|
||||
@ -4009,6 +4045,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0, false));
|
||||
@ -4210,6 +4247,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->mode = comExpert;
|
||||
def->min = 0;
|
||||
def->max_literal = { 20, true };
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(33, true));
|
||||
|
||||
def = this->add("thin_walls_overlap", coFloatOrPercent);
|
||||
@ -4220,6 +4258,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "external_perimeter_extrusion_width";
|
||||
def->mode = comExpert;
|
||||
def->min = 0;
|
||||
def->max_literal = { 10, true };
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
|
||||
|
||||
def = this->add("thin_walls_merge", coBool);
|
||||
@ -4296,6 +4335,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -4310,6 +4350,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->min = 0;
|
||||
def->max = 1000;
|
||||
def->max_literal = { 10, true };
|
||||
def->precision = 6;
|
||||
def->can_phony = true;
|
||||
def->mode = comAdvanced;
|
||||
@ -4361,6 +4402,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->sidetext = L("mm/s² or %");
|
||||
def->ratio_over = "default_acceleration";
|
||||
def->min = 0;
|
||||
def->max_literal = { -200, false };
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(1500, false));
|
||||
|
||||
@ -4520,6 +4562,8 @@ void PrintConfigDef::init_fff_params()
|
||||
def->tooltip = L("Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) only one nozzle diameter.");
|
||||
def->ratio_over = "nozzle_diameter";
|
||||
def->mode = comAdvanced;
|
||||
def->min = 0;
|
||||
def->max_literal = { 100, true };
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(150,true));
|
||||
|
||||
def = this->add("wipe_tower_x", coFloat);
|
||||
@ -4652,6 +4696,7 @@ void PrintConfigDef::init_fff_params()
|
||||
" This setting allows you some leway to broaden the detection."
|
||||
"\nIn mm or in % of the radius.");
|
||||
def->sidetext = L("mm or %");
|
||||
def->max_literal = { 10, false};
|
||||
def->mode = comExpert;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(0.01, false));
|
||||
|
||||
@ -4877,6 +4922,7 @@ void PrintConfigDef::init_milling_params()
|
||||
" You can set a number of mm or a percentage of the calculated optimal extra width (from flow calculation).");
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "computed_on_the_fly";
|
||||
def->max_literal = { 20, false };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(150, true));
|
||||
|
||||
@ -4886,6 +4932,7 @@ void PrintConfigDef::init_milling_params()
|
||||
def->tooltip = L("This setting restricts the post-process milling to a certain height, to avoid milling the bed. It can be a mm or a % of the first layer height (so it can depend on the object).");
|
||||
def->sidetext = L("mm or %");
|
||||
def->ratio_over = "first_layer_height";
|
||||
def->max_literal = { 10, false };
|
||||
def->mode = comAdvanced;
|
||||
def->set_default_value(new ConfigOptionFloatOrPercent(200, true));
|
||||
|
||||
|
||||
@ -210,42 +210,6 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
|
||||
apply(config, &new_conf);
|
||||
}
|
||||
|
||||
// check forgotten '%'
|
||||
{
|
||||
struct optDescr {
|
||||
ConfigOptionFloatOrPercent* opt;
|
||||
std::string name;
|
||||
float min;
|
||||
float max;
|
||||
};
|
||||
float diameter = 0.4f;
|
||||
if (config->option<ConfigOptionFloatOrPercent>("extrusion_width")->percent) {
|
||||
//has to be percent
|
||||
diameter = 0;
|
||||
} else {
|
||||
diameter = config->option<ConfigOptionFloatOrPercent>("extrusion_width")->value;
|
||||
}
|
||||
std::vector<optDescr> opts;
|
||||
opts.push_back({ config->option<ConfigOptionFloatOrPercent>("infill_overlap"), "infill_overlap", 0, diameter * 10 });
|
||||
for (int i = 0; i < opts.size(); i++) {
|
||||
if ((!opts[i].opt->percent) && (opts[i].opt->get_abs_value(diameter) < opts[i].min || opts[i].opt->get_abs_value(diameter) > opts[i].max)) {
|
||||
wxString msg_text = _(L("Did you forgot to put a '%' in the " + opts[i].name + " field? "
|
||||
"it's currently set to " + std::to_string(opts[i].opt->get_abs_value(diameter)) + " mm."));
|
||||
if (is_global_config) {
|
||||
msg_text += "\n\n" + _(L("Shall I add the '%'?"));
|
||||
wxMessageDialog dialog(nullptr, msg_text, _(L("Wipe Tower")),
|
||||
wxICON_WARNING | (is_global_config ? wxYES | wxNO : wxOK));
|
||||
DynamicPrintConfig new_conf = *config;
|
||||
auto answer = dialog.ShowModal();
|
||||
if (answer == wxID_YES) {
|
||||
new_conf.set_key_value(opts[i].name, new ConfigOptionFloatOrPercent(opts[i].opt->value * 100, true));
|
||||
apply(config, &new_conf);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// check changes from FloatOrPercent to percent (useful to migrate config from prusa to Slic3r)
|
||||
{
|
||||
std::vector<std::string> names;
|
||||
|
||||
@ -405,26 +405,48 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
|
||||
show_error(m_parent, _(L("Input value is out of range")));
|
||||
if (m_opt.min > val) val = m_opt.min;
|
||||
set_value(double_to_string(val, m_opt.precision), true);
|
||||
} else if (((m_opt.sidetext.rfind("mm/s") != std::string::npos && val > m_opt.max) ||
|
||||
(m_opt.sidetext.rfind("mm ") != std::string::npos && val > 1)) &&
|
||||
(m_value.empty() || std::string(str.ToUTF8().data()) != boost::any_cast<std::string>(m_value)))
|
||||
{
|
||||
// exceptions
|
||||
if (std::set<t_config_option_key>{"infill_anchor", "infill_anchor_max", "avoid_crossing_perimeters_max_detour"}.count(m_opt.opt_key) > 0) {
|
||||
m_value = std::string(str.ToUTF8().data());
|
||||
break;
|
||||
}
|
||||
if (m_opt.opt_key.find("extrusion_width") != std::string::npos || m_opt.opt_key.find("extrusion_spacing") != std::string::npos) {
|
||||
} else if (m_value.empty() || std::string(str.ToUTF8().data()) != boost::any_cast<std::string>(m_value)) {
|
||||
bool not_ok = (m_opt.sidetext.rfind("mm/s") != std::string::npos && val > m_opt.max);
|
||||
if( !not_ok && m_opt.max_literal.value != 0 )
|
||||
if (m_opt.max_literal.percent) {
|
||||
const DynamicPrintConfig& printer_config = wxGetApp().preset_bundle->printers.get_edited_preset().config;
|
||||
const std::vector<double>& nozzle_diameters = printer_config.option<ConfigOptionFloats>("nozzle_diameter")->values;
|
||||
double nozzle_diameter = 0;
|
||||
for (double diameter : nozzle_diameters)
|
||||
nozzle_diameter = std::max(nozzle_diameter, diameter);
|
||||
if (val < nozzle_diameter * 10) {
|
||||
m_value = std::string(str.ToUTF8().data());
|
||||
break;
|
||||
}
|
||||
if (m_opt.max_literal.value > 0)
|
||||
not_ok = val > nozzle_diameter * m_opt.max_literal.value;
|
||||
else
|
||||
not_ok = val < nozzle_diameter * (-m_opt.max_literal.value);
|
||||
}else{
|
||||
if(m_opt.max_literal.value > 0)
|
||||
not_ok = val > m_opt.max_literal.value;
|
||||
else
|
||||
not_ok = val < -m_opt.max_literal.value;
|
||||
}
|
||||
if (not_ok) {
|
||||
|
||||
// if (
|
||||
// (
|
||||
// (m_opt.sidetext.rfind("mm/s") != std::string::npos && val > m_opt.max)
|
||||
// ||
|
||||
// (m_opt.sidetext.rfind("mm ") != std::string::npos && val > m_opt.max_literal)
|
||||
// )
|
||||
// &&
|
||||
// (m_value.empty() || std::string(str.ToUTF8().data()) != boost::any_cast<std::string>(m_value)))
|
||||
//{
|
||||
// if (m_opt.opt_key.find("extrusion_width") != std::string::npos || m_opt.opt_key.find("extrusion_spacing") != std::string::npos) {
|
||||
// const DynamicPrintConfig& printer_config = wxGetApp().preset_bundle->printers.get_edited_preset().config;
|
||||
// const std::vector<double>& nozzle_diameters = printer_config.option<ConfigOptionFloats>("nozzle_diameter")->values;
|
||||
// double nozzle_diameter = 0;
|
||||
// for (double diameter : nozzle_diameters)
|
||||
// nozzle_diameter = std::max(nozzle_diameter, diameter);
|
||||
// if (val < nozzle_diameter * 10) {
|
||||
// m_value = std::string(str.ToUTF8().data());
|
||||
// break;
|
||||
// }
|
||||
// }
|
||||
//TODO: chack for infill_overlap from diameter% => allow max_literal to be a %
|
||||
|
||||
if (!check_value) {
|
||||
m_value.clear();
|
||||
@ -447,6 +469,7 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
m_value = std::string(str.ToUTF8().data());
|
||||
break;
|
||||
|
||||
@ -1887,6 +1887,13 @@ bool Tab::create_pages(std::string setting_type_name, int idx_page)
|
||||
option.opt.tooltip = (params[i].substr(8, params[i].size() - 8));
|
||||
need_to_notified_search = true;
|
||||
}
|
||||
else if (boost::starts_with(params[i], "max_literal$"))
|
||||
{
|
||||
if(params[i].back() == '%')
|
||||
option.opt.max_literal = { boost::lexical_cast<double>(params[i].substr(12, params[i].size() - 13).c_str()), true };
|
||||
else
|
||||
option.opt.max_literal = { boost::lexical_cast<double>(params[i].substr(12, params[i].size() - 12).c_str()), false };
|
||||
}
|
||||
}
|
||||
|
||||
if (need_to_notified_search)
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user