diff --git a/README.md b/README.md
index 777b23008..24d5829c2 100644
--- a/README.md
+++ b/README.md
@@ -134,7 +134,7 @@ The author of the Silk icon set is Mark James.
                             (default: 100,100)
         --z-offset          Additional height in mm to add to vertical coordinates
                             (+/-, default: 0)
-        --gcode-flavor      The type of G-code to generate (reprap/teacup/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
+        --gcode-flavor      The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
                             default: reprap)
         --use-relative-e-distances Enable this to get relative E values (default: no)
         --use-firmware-retraction  Enable firmware-controlled retraction using G10/G11 (default: no)
diff --git a/slic3r.pl b/slic3r.pl
index b6ab68a87..6f40e57a3 100755
--- a/slic3r.pl
+++ b/slic3r.pl
@@ -298,7 +298,7 @@ $j
                         (default: 100,100)
     --z-offset          Additional height in mm to add to vertical coordinates
                         (+/-, default: $config->{z_offset})
-    --gcode-flavor      The type of G-code to generate (reprap/teacup/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
+    --gcode-flavor      The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
                         default: $config->{gcode_flavor})
     --use-relative-e-distances Enable this to get relative E values (default: no)
     --use-firmware-retraction  Enable firmware-controlled retraction using G10/G11 (default: no)
diff --git a/t/gcode.t b/t/gcode.t
index ef2209a80..9e7bd354a 100644
--- a/t/gcode.t
+++ b/t/gcode.t
@@ -1,4 +1,4 @@
-use Test::More tests => 23;
+use Test::More tests => 25;
 use strict;
 use warnings;
 
@@ -215,4 +215,31 @@ use Slic3r::Test;
     ok !$spiral, 'spiral vase is correctly disabled on layers with multiple loops';
 }
 
+
+{
+    # Tests that the Repetier flavor produces M201 Xnnn Ynnn for resetting
+    # acceleration, also that M204 Snnn syntax is not generated. 
+    my $config = Slic3r::Config->new_from_defaults;
+    $config->set('gcode_flavor', 'repetier');
+    $config->set('default_acceleration', 1337);
+    my $print = Slic3r::Test::init_print('cube_with_hole', config => $config);
+    
+    my $has_accel = 0;
+    my $has_m204 = 0;
+    Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
+        my ($self, $cmd, $args, $info) = @_;
+        
+        if ($cmd eq 'M201' && exists $args->{X} && exists $args->{Y}) {
+            if ($args->{X} == 1337 && $args->{Y} == 1337) {
+                $has_accel = 1;
+            }
+        }
+        if ($cmd eq 'M204' && exists $args->{S}) {
+            $has_m204 = 1;
+        }
+    });
+    ok $has_accel, 'M201 is generated for repetier firmware.';
+    ok !$has_m204, 'M204 is not generated for repetier firmware';
+}
+
 __END__
diff --git a/utils/zsh/functions/_slic3r b/utils/zsh/functions/_slic3r
index df1cecb03..a78da948a 100644
--- a/utils/zsh/functions/_slic3r
+++ b/utils/zsh/functions/_slic3r
@@ -22,7 +22,7 @@ _arguments -S \
     '*--nozzle-diameter[specify nozzle diameter]:nozzle diameter in mm' \
     '--print-center[specify print center coordinates]:print center coordinates in mm,mm' \
     '--z-offset[specify Z-axis offset]:Z-axis offset in mm' \
-    '--gcode-flavor[specify the type of G-code to generate]:G-code flavor:(reprap teacup makerware sailfish mach3 machinekit no-extrusion)' \
+    '--gcode-flavor[specify the type of G-code to generate]:G-code flavor:(reprap teacup repetier makerware sailfish mach3 machinekit no-extrusion)' \
     '(--use-relative-e-distances --no-use-relative-e-distances)'--{no-,}use-relative-e-distances'[disable/enable relative E values]' \
     '--extrusion-axis[specify letter associated with the extrusion axis]:extrusion axis letter' \
     '(--gcode-arcs --no-gcode-arcs)'--{no-,}gcode-arcs'[disable/enable G2/G3 commands for native arcs]' \
diff --git a/xs/src/libslic3r/GCodeWriter.cpp b/xs/src/libslic3r/GCodeWriter.cpp
index 878e48764..b3909c8ed 100644
--- a/xs/src/libslic3r/GCodeWriter.cpp
+++ b/xs/src/libslic3r/GCodeWriter.cpp
@@ -54,7 +54,7 @@ GCodeWriter::preamble()
         gcode << "G21 ; set units to millimeters\n";
         gcode << "G90 ; use absolute coordinates\n";
     }
-    if (FLAVOR_IS(gcfRepRap) || FLAVOR_IS(gcfTeacup) || FLAVOR_IS(gcfSmoothie)) {
+    if (FLAVOR_IS(gcfRepRap) || FLAVOR_IS(gcfTeacup) || FLAVOR_IS(gcfRepetier) || FLAVOR_IS(gcfSmoothie)) {
         if (this->config.use_relative_e_distances) {
             gcode << "M83 ; use relative distances for extrusion\n";
         } else {
@@ -186,7 +186,14 @@ GCodeWriter::set_acceleration(unsigned int acceleration)
     this->_last_acceleration = acceleration;
     
     std::ostringstream gcode;
-    gcode << "M204 S" << acceleration;
+    if (FLAVOR_IS(gcfRepetier)) {
+        gcode << "M201 X" << acceleration << " Y" << acceleration;
+        if (this->config.gcode_comments) gcode << " ; adjust acceleration";
+        gcode << "\n";
+        gcode << "M202 X" << acceleration << " Y" << acceleration;
+    } else {
+        gcode << "M204 S" << acceleration;
+    }
     if (this->config.gcode_comments) gcode << " ; adjust acceleration";
     gcode << "\n";
     
diff --git a/xs/src/libslic3r/PrintConfig.cpp b/xs/src/libslic3r/PrintConfig.cpp
index 97c6f1f92..59dc5bfb1 100644
--- a/xs/src/libslic3r/PrintConfig.cpp
+++ b/xs/src/libslic3r/PrintConfig.cpp
@@ -467,6 +467,7 @@ PrintConfigDef::PrintConfigDef()
     def->cli = "gcode-flavor=s";
     def->enum_keys_map = ConfigOptionEnum<GCodeFlavor>::get_enum_values();
     def->enum_values.push_back("reprap");
+    def->enum_values.push_back("repetier");
     def->enum_values.push_back("teacup");
     def->enum_values.push_back("makerware");
     def->enum_values.push_back("sailfish");
@@ -474,7 +475,8 @@ PrintConfigDef::PrintConfigDef()
     def->enum_values.push_back("machinekit");
     def->enum_values.push_back("smoothie");
     def->enum_values.push_back("no-extrusion");
-    def->enum_labels.push_back("RepRap (Marlin/Sprinter/Repetier)");
+    def->enum_labels.push_back("RepRap (Marlin/Sprinter)");
+    def->enum_labels.push_back("Repetier");
     def->enum_labels.push_back("Teacup");
     def->enum_labels.push_back("MakerWare (MakerBot)");
     def->enum_labels.push_back("Sailfish (MakerBot)");
diff --git a/xs/src/libslic3r/PrintConfig.hpp b/xs/src/libslic3r/PrintConfig.hpp
index 5deaab951..c672b4669 100644
--- a/xs/src/libslic3r/PrintConfig.hpp
+++ b/xs/src/libslic3r/PrintConfig.hpp
@@ -26,7 +26,7 @@
 namespace Slic3r {
 
 enum GCodeFlavor {
-    gcfRepRap, gcfTeacup, gcfMakerWare, gcfSailfish, gcfMach3, gcfMachinekit, gcfNoExtrusion, gcfSmoothie,
+    gcfRepRap, gcfTeacup, gcfMakerWare, gcfSailfish, gcfMach3, gcfMachinekit, gcfNoExtrusion, gcfSmoothie, gcfRepetier,
 };
 
 enum InfillPattern {
@@ -45,6 +45,7 @@ enum SeamPosition {
 template<> inline t_config_enum_values ConfigOptionEnum<GCodeFlavor>::get_enum_values() {
     t_config_enum_values keys_map;
     keys_map["reprap"]          = gcfRepRap;
+    keys_map["repetier"]        = gcfRepetier;
     keys_map["teacup"]          = gcfTeacup;
     keys_map["makerware"]       = gcfMakerWare;
     keys_map["sailfish"]        = gcfSailfish;