diff --git a/resources/profiles/Basic.ini b/resources/profiles/Basic.ini
index 9a3cc6723..d3f0ddb61 100644
--- a/resources/profiles/Basic.ini
+++ b/resources/profiles/Basic.ini
@@ -51,7 +51,7 @@ wipe = 1
 z_offset = 0
 bed_shape = 0x0,200x0,200x200,0x200
 max_print_height = 200
-default_filament_profile = PLA
+default_filament_profile = Basic PLA
 
 
 [printer:*0.15nozzle*]
@@ -668,7 +668,7 @@ slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 
 
-[filament:PLA Gererique]
+[filament:Basic PLA]
 inherits = *common*
 bed_temperature = 60
 fan_below_layer_time = 100
@@ -687,7 +687,7 @@ bridge_fan_speed = 100
 top_fan_speed = 100
 temperature = 205
 
-[filament:PET Gererique]
+[filament:Basic PET]
 inherits = *common*
 bed_temperature = 70
 cooling = 0
@@ -701,14 +701,14 @@ filament_cost = 30
 first_layer_bed_temperature =70
 first_layer_temperature = 230
 fan_always_on = 1
-max_fan_speed = 40
+max_fan_speed = 30
 min_fan_speed = 20
 bridge_fan_speed = 100
 top_fan_speed = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 238
+temperature = 240
 
-[filament:ABS Gererique]
+[filament:Basic ABS]
 inherits = *common*
 bed_temperature = 90
 cooling = 0
@@ -727,4 +727,4 @@ max_fan_speed = 0
 min_fan_speed = 0
 bridge_fan_speed = 30
 top_fan_speed = 0
-temperature = 238
\ No newline at end of file
+temperature = 240
\ No newline at end of file
diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini
index bafa4a6e7..86a1b3c00 100644
--- a/resources/profiles/Creality.ini
+++ b/resources/profiles/Creality.ini
@@ -80,7 +80,7 @@ default_print_profile = 0.32mm NORMAL 0.6 nozzle
 
 [printer:*ENDER-3*]
 inherits = *common*
-bed_shape = 0x2,220x2,220x220,0x220
+bed_shape = 0x0,220x0,220x220,0x220
 max_print_height = 250
 printer_model = ENDER-3
 machine_max_acceleration_e = 5000
@@ -109,7 +109,7 @@ retract_before_travel = 0.5
 retract_length = 6
 retract_speed = 40
 default_print_profile = 0.16mm NORMAL 0.4 nozzle
-default_filament_profile = PLA
+default_filament_profile = Creality PLA
 
 [printer:ENDER-3 0.2 nozzle]
 inherits = *ENDER-3*; *0.2nozzle*
@@ -118,7 +118,7 @@ retract_before_travel = 0.5
 retract_length = 6
 retract_speed = 40
 default_print_profile = 0.16mm NORMAL 0.4 nozzle
-default_filament_profile = PLA
+default_filament_profile = Creality PLA
 
 [printer:ENDER-3 0.6 nozzle]
 inherits = *ENDER-3*; *0.6nozzle*
@@ -127,7 +127,7 @@ retract_before_travel = 0.5
 retract_length = 6
 retract_speed = 40
 default_print_profile = 0.16mm NORMAL 0.4 nozzle
-default_filament_profile = PLA
+default_filament_profile = Creality PLA
 
 
 [printer:*CR-10*]
@@ -465,7 +465,7 @@ slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 
 
-[filament:PLA Gererique]
+[filament:Creality PLA]
 inherits = *common*
 bed_temperature = 60
 fan_below_layer_time = 100
@@ -484,7 +484,7 @@ bridge_fan_speed = 100
 top_fan_speed = 100
 temperature = 205
 
-[filament:PET Gererique]
+[filament:Creality PET]
 inherits = *common*
 bed_temperature = 70
 cooling = 0
@@ -505,7 +505,7 @@ top_fan_speed = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 238
 
-[filament:ABS Gererique]
+[filament:Creality ABS]
 inherits = *common*
 bed_temperature = 90
 cooling = 0