From c754ab38834e725fccceb342353592894f0492e5 Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 14 Jan 2020 18:41:46 +0100 Subject: [PATCH] some text update --- README.md | 4 ++-- resources/ui_layout/print.ui | 24 ++++++++++++------------ src/libslic3r/PrintConfig.cpp | 5 +++-- 3 files changed, 17 insertions(+), 16 deletions(-) diff --git a/README.md b/README.md index 45e73f0f4..c9e9e5435 100644 --- a/README.md +++ b/README.md @@ -32,13 +32,13 @@ The command line interface is a thin wrapper over `libslic3r`. * Better **Thin walls** (anchored inside the print, no more random bits at the ends). * Options to change holes dimensions and/or geometry, to print them at the right size. * Better overhangs (add perimeters if needed, slice them in opposite direction each layer). -* Briml rework: many more options (inside, outside ounly, 'ears') +* Brim rework: many more options (inside, outside ounly, 'ears') * Some new seam options, to help hide them. * Can join perimeters into a big one to avoid travel moves. * Many other little options and corrections (like the filled concentric pattern). * It has also all the current slic3rPE/PrusaSlicer features. -#### Complete changelog [here](https://github.com/supermerill/Slic3r/wiki) +### Complete changelog [here](https://github.com/supermerill/Slic3r/wiki) See the wiki for examples. diff --git a/resources/ui_layout/print.ui b/resources/ui_layout/print.ui index 42d558c0b..9013c30e0 100644 --- a/resources/ui_layout/print.ui +++ b/resources/ui_layout/print.ui @@ -1,7 +1,7 @@ #logs page:Perimeters & Shell:shell group:Vertical shells - setting:label$perimeters yeah!:width$5:perimeters + setting:label$perimeters:perimeters setting:spiral_vase recommended_thin_wall_thickness_description group:Horizontal shells @@ -21,18 +21,18 @@ group:Quality (slower slicing) setting:thin_perimeters line:Thin walls setting:thin_walls - setting:thin_walls_min_width - setting:thin_walls_overlap + setting:width$5:thin_walls_min_width + setting:width$5:thin_walls_overlap end_line line:Overhangs setting:overhangs - setting:overhangs_width + setting:width$5:overhangs_width end_line setting:no_perimeter_unsupported_algo group:Advanced line:Gap Fill setting:gap_fill - setting:gap_fill_min_area + setting:width$5:gap_fill_min_area end_line line:Seam setting:seam_position @@ -57,15 +57,15 @@ group:Filtering setting:slice_closing_radius group:Modifying slices line:Curve smoothing - setting:curve_smoothing_precision - setting:curve_smoothing_angle_convex - setting:curve_smoothing_angle_concave - setting:curve_smoothing_cutoff_dist + setting:width$6:curve_smoothing_precision + setting:width$6:curve_smoothing_angle_convex + setting:width$6:curve_smoothing_angle_concave + setting:width$6:curve_smoothing_cutoff_dist end_line line:XY compensation - setting:xy_size_compensation - setting:elefant_foot_compensation - setting:hole_size_compensation + setting:width$6:xy_size_compensation + setting:width$6:elefant_foot_compensation + setting:width$6:hole_size_compensation end_line setting:hole_to_polyhole group:Other diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 3558d69da..bade6bdbf 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -470,7 +470,7 @@ void PrintConfigDef::init_fff_params() def = this->add("elefant_foot_compensation", coFloat); def->label = L("First layer"); - def->full_label = L("First layer compensation"); + def->full_label = L("XY First layer compensation"); def->category = OptionCategory::slicing; def->tooltip = L("The first layer will be grown / shrunk in the XY plane by the configured value " "to compensate for the 1st layer squish aka an Elephant Foot effect. (should be negative = inwards)"); @@ -1235,7 +1235,8 @@ void PrintConfigDef::init_fff_params() def->full_label = L("Ironing width"); def->category = OptionCategory::infill; def->tooltip = L("This is the width of the ironing pass, in a % of the top extrusion width, should not be more than 50%" - " (two times more lines, 50% overlap). It's not necessary to go below 25% (four times more lines, 75% overlap)"); + " (two times more lines, 50% overlap). It's not necessary to go below 25% (four times more lines, 75% overlap). \nIf you have problems with your ironing process," + " don't forget to look at the flow->above bridge flow, as this setting should be set to min 110% to let you have enough plastic in the top layer."); def->min = 0; def->mode = comExpert; def->set_default_value(new ConfigOptionFloatOrPercent(50, true));