Add voron v2 initial profile

and update others where needed

resources/profiles/BIBO.ini

@@ -68,6 +68,7 @@ max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
 overhangs = 1
+only_one_perimeter_top = 1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
@@ -97,7 +98,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
@@ -109,7 +112,11 @@ support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
-thin_walls = 0
+thin_perimeters = 0
+thin_walls = 1
+thin_walls_min_width = 50%
+thin_walls_overlap = 50%
+top_fill_pattern = smooth
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 40
 travel_speed = 130

resources/profiles/Creality.ini

@@ -96,6 +96,7 @@ deretract_speed = 0
 extruder_colour = #FFFF00
 extruder_offset = 0x0
 gcode_flavor = marlin
+fan_speedup_time = -1
 silent_mode = 0
 remaining_times = 0
 machine_max_acceleration_e = 10000
@@ -381,6 +382,7 @@ support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 150%
+thin_perimeters = 0
 thin_walls = 1
 thin_walls_min_width = 50%
 thin_walls_overlap = 50%

resources/profiles/LulzBot.ini

@@ -69,6 +69,7 @@ max_print_speed = 80
 max_volumetric_speed = 0
 min_skirt_length = 0
 notes = 
+only_one_perimeter_top = 1
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
@@ -81,7 +82,7 @@ perimeters = 3
 post_process = 
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = hidden
 single_extruder_multi_material_priming = 1
 skirt_distance = 3
 skirt_height = 1
@@ -99,7 +100,9 @@ support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.44
@@ -115,9 +118,12 @@ support_material_synchronize_layers = 0
 support_material_threshold = 0
 support_material_with_sheath = 1
 support_material_xy_spacing = 50%
+thin_perimeters = 0
 thin_walls = 1
+thin_walls_min_width = 50%
+thin_walls_overlap = 50%
 threads = 12
-top_fill_pattern = rectilinear
+top_fill_pattern = smooth
 top_infill_extrusion_width = 0.52
 top_solid_infill_speed = 40
 top_solid_layers = 3

resources/profiles/PrusaResearch.ini

@@ -142,6 +142,7 @@ over_bridge_flow_ratio = 120%
 fill_top_flow_ratio = 100%
 bridge_speed = 20
 brim_width = 0
+bottom_fill_pattern = rectilinear
 clip_multipart_objects = 1
 compatible_printers = 
 complete_objects = 0
@@ -149,14 +150,12 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = -0.2
 ensure_vertical_shell_thickness = 1
-top_fill_pattern = rectilinear
-bottom_fill_pattern = rectilinear
+
 external_perimeters_first = 0
 external_perimeter_extrusion_width = 0.45
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 45
-only_one_perimeter_top = 0
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -181,6 +180,7 @@ max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
 overhangs = 0
+only_one_perimeter_top = 1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
@@ -224,9 +224,11 @@ support_material_synchronize_layers = 0
 support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
+thin_perimeters = 0
 thin_walls = 1
-thin_walls_min_width = 100%
+thin_walls_min_width = 50%
 thin_walls_overlap = 50%
+top_fill_pattern = smooth
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 40
 travel_speed = 180

resources/profiles/Voron.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.2.0
+0.0.1 Initial version

resources/profiles/Voron.ini

@@ -0,0 +1,856 @@
+# Print profiles for the Creality printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Voron
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.1
+# Where to get the updates from?
+config_update_url = 
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+#TODO: One day we may differentiate variants of the nozzles / hot ends,
+#for example by the melt zone size, or whether the nozzle is hardened.
+# Printer model name will be shown by the installation wizard.
+[printer_model:Voron_v2_250]
+name = Voron v2 250mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2
+bed_model = printbed-v2-250.STL
+bed_texture = bedtexture-v2-250.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON Basic ABS @VORON; Basic ABS VOLCANO @VORON
+thumbnail = voron2_thumbnail.png
+
+[printer_model:Voron_v2_300]
+name = Voron v2 300mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2
+bed_model = printbed-v2-300.STL
+bed_texture = bedtexture-v2-300.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON Basic ABS @VORON; Basic ABS VOLCANO @VORON
+thumbnail = voron2_thumbnail.png
+
+[printer_model:Voron_v2_350]
+name = Voron v2 350mm3
+variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2
+bed_model = printbed-v2-350.STL
+bed_texture = bedtexture-v2-350.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON Basic ABS @VORON; Basic ABS VOLCANO @VORON
+thumbnail = voron2_thumbnail.png
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface
+
+[printer:*0.25nozzle*]
+nozzle_diameter = 0.25
+max_layer_height = 0.175
+min_layer_height = 0.025
+printer_variant = 0.25
+default_print_profile = 0.10mm 0.25nozzle
+
+[printer:*0.3nozzle*]
+nozzle_diameter = 0.3
+max_layer_height = 0.225
+min_layer_height = 0.025
+printer_variant = 0.3
+default_print_profile = 0.10mm 0.3nozzle
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.3
+min_layer_height = 0.0375
+printer_variant = 0.4
+default_print_profile = 0.15mm 0.4nozzle
+
+[printer:*0.5nozzle*]
+nozzle_diameter = 0.5
+max_layer_height = 0.375
+min_layer_height = 0.05
+printer_variant = 0.5
+default_print_profile = 0.2mm 0.5nozzle
+
+[printer:*0.6nozzle*]
+nozzle_diameter = 0.6
+max_layer_height = 0.45
+min_layer_height = 0.075
+printer_variant = 0.6
+default_print_profile = 0.2mm 0.6nozzle
+
+[printer:*0.8nozzle*]
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.0875
+printer_variant = 0.8
+default_print_profile = 0.3mm 0.8nozzle
+
+[printer:*1.0nozzle*]
+nozzle_diameter = 1.0
+max_layer_height = 0.75
+min_layer_height = 0.1
+default_print_profile = 0.4mm 1.0nozzle
+
+[printer:*1.2nozzle*]
+nozzle_diameter = 1.2
+max_layer_height = 0.9
+min_layer_height = 0.125
+default_print_profile = 0.4mm 1.2nozzle
+
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y240 F3000 ; home X axis\nM84 ; disable motors
+extruder_colour = #FFE3CA
+extruder_offset = 0x0
+gcode_flavor = klipper
+fan_speedup_time = -1
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+remaining_times = 0
+silent_mode = 0
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = voron
+printer_settings_id = 
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 3.8
+retract_length_toolchange = 10
+retract_lift = 0.1
+retract_lift_above = 0
+retract_lift_below = 500
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 70
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = ;================ SET VARIABLES ====================\nG21				;set units to mm \nG90				;use absolute coordinates\nM290 R0 S0			;reset babystepping\nM220 S100			;reset speed multiplier\nG92 E0				;reset e count\nM83   				;relative extrusion\nSET_PRESSURE_ADVANCE ADVANCE=0.4	;set pressure advance\nM106 P7 S255			;leds on\n;================ INITIALISATION ====================\n;----------------------- QAUD GANTRY LEVEL---------------------------------\nG28 				; first homing, to be sure the printer is initialize and can receive move commands\nQUAD_GANTRY_LEVEL		;level the gantry\n;----------------------- CLEANING---------------------------------\nM140 S[first_layer_bed_temperature]	;set bed temperature do not wait\nM104 S160			;set temperature to soft but no drop\nM109 S160			;wait first layer temp\n; BRUSH_NOZZLE ; call the macro that will clean the nozzle\n;----------------------- PRECISE HOME---------------------------------\nG28 ; \n;----------------------- WAIT TEMP---------------------------------\nM104 S[first_layer_temperature]		;set temperature do not wait\nM109 S[first_layer_temperature]		;wait first layer temp\nM190 S[first_layer_bed_temperature]	;wait for bed temp\n;=============== START =============== \n;-----------------------PRIMING-------------------------------------------\nG0 X0 Y0				;move to approx starting location\nG0 Z0.4\nG1 X70.0 E25.0 F500			;prime extruder\nG92 E0				;reset extrusion\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+default_filament_profile = Basic PLA @VORON
+
+[printer:*volcano*]
+retract_length = 4
+
+[printer:*Voron_v2_250*]
+inherits = *common*
+bed_shape = 0x0,250x0,250x250,0x250
+max_print_height = 250
+printer_model = Voron_v2_250
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:*Voron_v2_300*]
+inherits = *common*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = Voron_v2_300
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:*Voron_v2_350*]
+inherits = *common*
+bed_shape = 0x0,350x0,350x350,0x350
+max_print_height = 350
+printer_model = Voron_v2_350
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:Voron_v2_250 0.25 nozzle]
+inherits = *Voron_v2_250*; *0.25nozzle*
+
+[printer:Voron_v2_250 0.3 nozzle]
+inherits = *Voron_v2_250*; *0.3nozzle*
+
+[printer:Voron_v2_250 0.4 nozzle]
+inherits = *Voron_v2_250*; *0.4nozzle*
+
+[printer:Voron_v2_250 0.5 nozzle]
+inherits = *Voron_v2_250*; *0.5nozzle*
+
+[printer:Voron_v2_250 0.6 nozzle]
+inherits = *Voron_v2_250*; *0.6nozzle*
+
+[printer:Voron_v2_250 0.8 nozzle]
+inherits = *Voron_v2_250*; *0.8nozzle*
+
+[printer:Voron_v2_250 0.6 volcano]
+inherits = *Voron_v2_250*; *0.6nozzle*; *volcano*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250 0.8 volcano]
+inherits = *Voron_v2_250*; *0.8nozzle*; *volcano*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250 1.0 volcano]
+inherits = *Voron_v2_250*; *1.0nozzle*; *volcano*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250 1.2 volcano]
+inherits = *Voron_v2_250*; *1.2nozzle*; *volcano*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 0.25 nozzle]
+inherits = *Voron_v2_300*; *0.25nozzle*
+
+[printer:Voron_v2_300 0.3 nozzle]
+inherits = *Voron_v2_300*; *0.3nozzle*
+
+[printer:Voron_v2_300 0.4 nozzle]
+inherits = *Voron_v2_300*; *0.4nozzle*
+
+[printer:Voron_v2_300 0.5 nozzle]
+inherits = *Voron_v2_300*; *0.5nozzle*
+
+[printer:Voron_v2_300 0.6 nozzle]
+inherits = *Voron_v2_300*; *0.6nozzle*
+
+[printer:Voron_v2_300 0.8 nozzle]
+inherits = *Voron_v2_300*; *0.8nozzle*
+
+[printer:Voron_v2_300 0.6 volcano]
+inherits = *Voron_v2_300*; *0.6nozzle*; *volcano*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 0.8 volcano]
+inherits = *Voron_v2_300*; *0.8nozzle*; *volcano*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 1.0 volcano]
+inherits = *Voron_v2_300*; *1.0nozzle*; *volcano*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 1.2 volcano]
+inherits = *Voron_v2_300*; *1.2nozzle*; *volcano*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 0.25 nozzle]
+inherits = *Voron_v2_350*; *0.25nozzle*
+
+[printer:Voron_v2_350 0.3 nozzle]
+inherits = *Voron_v2_350*; *0.3nozzle*
+
+[printer:Voron_v2_350 0.4 nozzle]
+inherits = *Voron_v2_350*; *0.4nozzle*
+
+[printer:Voron_v2_350 0.5 nozzle]
+inherits = *Voron_v2_350*; *0.5nozzle*
+
+[printer:Voron_v2_350 0.6 nozzle]
+inherits = *Voron_v2_350*; *0.6nozzle*
+
+[printer:Voron_v2_350 0.8 nozzle]
+inherits = *Voron_v2_350*; *0.8nozzle*
+
+[printer:Voron_v2_350 volcano 0.6 nozzle]
+inherits = *Voron_v2_350*; *0.6nozzle*; *volcano*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 volcano 0.8 nozzle]
+inherits = *Voron_v2_350*; *0.8nozzle*; *volcano*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 volcano 1.0 nozzle]
+inherits = *Voron_v2_350*; *1.0nozzle*; *volcano*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 volcano 1.2 nozzle]
+inherits = *Voron_v2_350*; *1.2nozzle*; *volcano*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile, for now.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
+# All other print presets will derive from the *common* print preset.
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_acceleration = 2000
+bridge_angle = 0
+bridge_flow_ratio = 90%
+bottom_fill_pattern = rectilineargapfill
+bridge_speed = 60
+brim_inside_holes = 0
+brim_width = 0
+brim_width_interior = 0
+brim_ears = 0
+brim_ears_max_angle = 120
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+curve_smoothing_precision = 0
+curve_smoothing_angle_convex = 160
+curve_smoothing_angle_concave = 160
+curve_smoothing_cutoff_dist = 4
+default_acceleration = 3500
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+external_perimeters_first = 0
+external_perimeter_speed = 50
+extra_perimeters = 0
+extra_perimeters_odd_layers = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+elefant_foot_compensation = -0.1
+fill_angle = 45
+fill_density = 13%
+fill_pattern = gyroid
+fill_top_flow_ratio = 100%
+fill_smooth_width = 50%
+fill_smooth_distribution = 15%
+first_layer_acceleration = 1000
+first_layer_flow_ratio = 100%
+first_layer_height = 75%
+first_layer_speed = 30
+gap_fill_speed = 80
+gcode_comments = 0
+hole_size_compensation = -0.05
+infill_acceleration = 3500
+infill_dense = 1
+infill_dense_algo = autosmall
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 38%
+infill_speed = 125
+interface_shells = 0
+label_printed_objects = 1
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 5
+notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
+only_one_perimeter_top = 1
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-[timestamp].gcode
+over_bridge_flow_ratio = 110%
+overhangs = 1
+perimeters = 3
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_speed = 100
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = hidden
+single_extruder_multi_material_priming = 1
+skirts = 2
+skirt_distance = 3
+skirt_height = 1
+small_perimeter_speed = 50
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_speed = 125
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 1
+support_material_interface_pattern = sawtooth
+support_material_interface_spacing = 0
+support_material_interface_speed = 70
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 1.5
+support_material_speed = 90
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 0.6
+thin_perimeters = 0
+thin_walls = 1
+thin_walls_min_width = 50%
+thin_walls_overlap = 50%
+top_fill_pattern = smooth
+top_solid_infill_speed = 50
+travel_speed = 350
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+extrusion_width = 110%
+external_perimeter_extrusion_width = 105%
+first_layer_extrusion_width = 140%
+infill_extrusion_width = 110%
+perimeter_extrusion_width = 110%
+solid_infill_extrusion_width = 110%
+top_infill_extrusion_width = 110%
+support_material_extrusion_width = 110%
+
+# Print parameters common to a 0.25mm diameter nozzle.
+[print:*0.25nozzle*]
+perimeters = 5
+support_material_interface_spacing = 0.1
+support_material_spacing = 1
+first_layer_height = 0.15
+
+# Print parameters common to a 0.3mm diameter nozzle.
+[print:*0.3nozzle*]
+perimeters = 4
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+first_layer_height = 0.2
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.4nozzle*]
+perimeters = 3
+support_material_interface_spacing = 0.2
+support_material_spacing = 1
+first_layer_height = 0.2
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.5nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.2
+support_material_spacing = 1.1
+first_layer_height = 0.2
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.6nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.3
+support_material_spacing = 1.2
+first_layer_height = 0.3
+
+# Print parameters common to a 0.8mm diameter nozzle.
+[print:*0.8nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.3
+support_material_spacing = 1.2
+first_layer_height = 0.4
+
+[print:*1.0nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.4
+support_material_spacing = 1.4
+first_layer_height = 0.4
+
+[print:*1.2nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.5
+support_material_spacing = 1.6
+first_layer_height = 0.4
+
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 11
+top_solid_layers = 12
+layer_height = 0.05
+bridge_flow_ratio = 70%
+external_perimeter_speed = 35
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 8
+top_solid_layers = 9
+layer_height = 0.1
+bridge_flow_ratio = 80%
+external_perimeter_speed = 35
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:*0.15mm*]
+inherits = *common*
+bottom_solid_layers = 6
+top_solid_layers = 7
+layer_height = 0.15
+bridge_flow_ratio = 80%
+
+[print:*0.2mm*]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+layer_height = 0.2
+bridge_flow_ratio = 90%
+
+[print:*0.25mm*]
+inherits = *common*
+bottom_solid_layers = 4
+top_solid_layers = 5
+layer_height = 0.25
+bridge_flow_ratio = 90%
+
+[print:*0.3mm*]
+inherits = *common*
+bottom_solid_layers = 3
+top_solid_layers = 4
+layer_height = 0.3
+bridge_flow_ratio = 90%
+
+[print:*0.4mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.4
+bridge_flow_ratio = 90%
+
+[print:*0.6mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.6
+bridge_flow_ratio = 90%
+
+[print:*0.8mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.8
+bridge_flow_ratio = 90%
+
+[print:0.05mm 0.25nozzle]
+inherits = *0.05mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25
+
+[print:0.05mm 0.3nozzle]
+inherits = *0.05mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.05mm 0.4nozzle]
+inherits = *0.05mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.05mm 0.5nozzle]
+inherits = *0.05mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+
+[print:0.10mm 0.25nozzle]
+inherits = *0.10mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25
+
+[print:0.10mm 0.3nozzle]
+inherits = *0.10mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.10mm 0.4nozzle]
+inherits = *0.10mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm 0.5nozzle]
+inherits = *0.10mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.10mm 0.6nozzle]
+inherits = *0.10mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.10mm 0.8nozzle]
+inherits = *0.10mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+
+[print:0.15mm 0.25nozzle]
+inherits = *0.15mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25
+
+[print:0.15mm 0.3nozzle]
+inherits = *0.15mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.15mm 0.4nozzle]
+inherits = *0.15mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.15mm 0.5nozzle]
+inherits = *0.15mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.15mm 0.6nozzle]
+inherits = *0.15mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.15mm 0.8nozzle]
+inherits = *0.15mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.15mm 1.0nozzle]
+inherits = *0.15mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.15mm 1.2nozzle]
+inherits = *0.15mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.2mm 0.3nozzle]
+inherits = *0.2mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.2mm 0.4nozzle]
+inherits = *0.2mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.2mm 0.5nozzle]
+inherits = *0.2mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.2mm 0.6nozzle]
+inherits = *0.2mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.2mm 0.8nozzle]
+inherits = *0.2mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.2mm 1.0nozzle]
+inherits = *0.2mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.2mm 1.2nozzle]
+inherits = *0.2mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.3mm 0.4nozzle]
+inherits = *0.3mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.3mm 0.5nozzle]
+inherits = *0.3mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.3mm 0.6nozzle]
+inherits = *0.3mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.3mm 0.8nozzle]
+inherits = *0.3mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.3mm 1.0nozzle]
+inherits = *0.3mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.3mm 1.2nozzle]
+inherits = *0.3mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.4mm 0.6nozzle]
+inherits = *0.4mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.4mm 0.8nozzle]
+inherits = *0.4mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.4mm 1.0nozzle]
+inherits = *0.4mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.4mm 1.2nozzle]
+inherits = *0.4mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.6mm 0.8nozzle]
+inherits = *0.6mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.6mm 1.0nozzle]
+inherits = *0.6mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.6mm 1.2nozzle]
+inherits = *0.6mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.8mm 1.2nozzle]
+inherits = *0.8mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+
+[filament:*common*]
+cooling = 1
+compatible_printers = 
+compatible_printers_condition = 
+end_filament_gcode = ""
+extrusion_multiplier = 1
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_load_time = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = ""
+
+
+[filament:*BasicPLA*]
+inherits = *common*
+bed_temperature = 55
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 55
+first_layer_temperature = 215
+disable_fan_first_layers = 1
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+top_fan_speed = 100
+temperature = 205
+
+[filament:Basic PLA @VORON]
+inherits = *BasicPLA*
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:Basic PLA VOLCANO @VORON]
+inherits = *BasicPLA*
+filament_max_volumetric_speed = 20
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+
+[filament:*BasicPET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 0
+disable_fan_first_layers = 2
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_type = PET
+filament_density = 1.45
+filament_cost = 30
+first_layer_bed_temperature =70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 30
+min_fan_speed = 20
+bridge_fan_speed = 100
+top_fan_speed = 20
+temperature = 245
+
+[filament:Basic PET @VORON]
+inherits = *BasicPLA*
+filament_max_volumetric_speed = 8
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:Basic PET VOLCANO @VORON]
+inherits = *BasicPLA*
+filament_max_volumetric_speed = 14
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+
+[filament:*BasicABS*]
+inherits = *common*
+bed_temperature = 90
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 250
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+top_fan_speed = 0
+temperature = 250
+
+[filament:Basic ABS @VORON]
+inherits = *BasicABS*
+filament_max_volumetric_speed = 11
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:Basic ABS VOLCANO @VORON]
+inherits = *BasicABS*
+filament_max_volumetric_speed = 17
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/