GitHub-Proxy/Slic3r
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git synced 2025-08-14 11:45:59 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'master' into dev

Browse Source
This commit is contained in:
supermerill 2020-09-07 01:54:03 +02:00
commit e586d67be5
33 changed files with 349 additions and 136 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
CMakeLists.txt
View File

@ -504,7 +504,7 @@ endif()
if (WIN32)
install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")
elseif (SLIC3R_FHS)
set(SLIC3R_FHS_RESOURCES "${CMAKE_INSTALL_FULL_DATAROOTDIR}/slic3r++")
set(SLIC3R_FHS_RESOURCES "${CMAKE_INSTALL_FULL_DATAROOTDIR}/SuperSlicer")
install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${SLIC3R_FHS_RESOURCES}")
else ()
install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")

1
resources/profiles/BIBO.idx
View File

@ -1,4 +1,5 @@
min_slic3r_version = 2.2.0-alpha3
0.0.4 superslicer: remove top_fan_speed
0.0.3 slic3r++ adaptation: overlapping & top pattern.
0.0.2 changed flow ratio from float to %
0.0.1 Multiple Print models were unified into a single one.

3
resources/profiles/BIBO.ini
View File

@ -5,7 +5,7 @@
name = BIBO
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.3
config_version = 0.0.4
# Where to get the updates from?
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
@ -468,7 +468,6 @@ fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 25
top_fan_speed = 0
temperature = 245
[filament:*FLEX*]

3
resources/profiles/Basic.ini
View File

@ -5,7 +5,7 @@
name = Custom
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the Slic3r configuration to be downgraded.
config_version = 0.1.1
config_version = 0.1.2
# Where to get the updates from?
config_update_url =
@ -694,5 +694,4 @@ fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 240

1
resources/profiles/Creality.idx
View File

@ -1,4 +1,5 @@
min_slic3r_version = 2.2.0-alpha3
0.2.5 superslicer: remove top_fan_speed
0.2.4 slic3r++ adaptation: overlapping & top pattern.
0.2.3 changed flow ratio from float to %
0.2.2 version

3
resources/profiles/Creality.ini
View File

@ -5,7 +5,7 @@
name = Creality
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.2.4
config_version = 0.2.5
# Where to get the updates from?
config_update_url =
@ -690,5 +690,4 @@ fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245

2
resources/profiles/PrusaResearch.idx
View File

@ -1,5 +1,5 @@
min_slic3r_version = 2.2.0-alpha3
1.1.6 superslicer: thumbnails.
1.1.6 superslicer: thumbnails & remove top_fan_speed
1.1.5 slic3r++ adaptation: overlapping & top pattern.
1.1.4 changed flow ratio from float to %
1.1.3 slic3r++ version

4
resources/profiles/PrusaResearch.ini
View File

@ -1980,7 +1980,7 @@ filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0
bridge_fan_speed = -1
filament_max_volumetric_speed = 8
[filament:PrimaSelect PVA+]
@ -2912,7 +2912,7 @@ filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0
bridge_fan_speed = -1
filament_cost = 77.3
filament_density = 1.20

1
resources/profiles/Voron.idx
View File

@ -1,3 +1,4 @@
min_slic3r_version = 2.2.0
0.0.3 superslicer: remove top_fan_speed
0.0.2 Update from DocJeeves settings, adding afterburner / mobius difference
0.0.1 Initial version

3
resources/profiles/Voron.ini
View File

@ -5,7 +5,7 @@
name = Voron
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.2
config_version = 0.0.3
# Where to get the updates from?
config_update_url =
@ -1037,7 +1037,6 @@ max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
slowdown_below_layer_time = 15
top_fan_speed = 0
temperature = 250
[filament:Basic ABS @VORON]

1
resources/ui_layout/print.ui
View File

@ -238,6 +238,7 @@ group:Extrusion width
setting:top_infill_extrusion_width
setting:support_material_extrusion_width
setting:skirt_extrusion_width
recommended_extrusion_width_description
group:Overlap
line:Perimeter overlap
setting:label$External:external_perimeter_overlap

2
src/PrusaSlicer.cpp
View File

@ -417,7 +417,7 @@ int CLI::run(int argc, char **argv)
PrintBase *print = (printer_technology == ptFFF) ? static_cast<PrintBase*>(&fff_print) : static_cast<PrintBase*>(&sla_print);
if (! m_config.opt_bool("dont_arrange")) {
//FIXME make the min_object_distance configurable.
model.arrange_objects(fff_print);
model.arrange_objects(print);
model.center_instances_around_point((! user_center_specified && m_print_config.has("bed_shape")) ?
BoundingBoxf(m_print_config.opt<ConfigOptionPoints>("bed_shape")->values).center() :
m_config.option<ConfigOptionPoint>("center")->value);

49
src/libslic3r/GCode.cpp
View File

@ -1191,6 +1191,51 @@ std::vector<const PrintInstance*> sort_object_instances_by_model_order(const Pri
return instances;
}
// set standby temp for extruders
// Parse the custom G-code, try to find T, and add it if not present
static void init_multiextruders(FILE *file, Print &print, GCodeWriter & writer, ToolOrdering &tool_ordering, const std::string &custom_gcode )
{
//set standby temp for reprap
if (std::set<uint8_t>{gcfRepRap}.count(print.config().gcode_flavor.value) > 0) {
for (uint16_t tool_id : tool_ordering.all_extruders()) {
fprintf(file, "G10 P%d R%d S%d ; sets the standby temperature\n",
tool_id,
int(print.config().filament_toolchange_temp.get_at(tool_id)),
int(print.config().temperature.get_at(tool_id)));
}
}
//activate first extruder is multi-extruder and not in start-gcode
if (writer.multiple_extruders) {
if (std::set<uint8_t>{gcfRepRap}.count(print.config().gcode_flavor.value) > 0) {
//if not in gcode
bool find = false;
if (!custom_gcode.empty()) {
const char *ptr = custom_gcode.data();
while (*ptr != 0) {
// Skip whitespaces.
for (; *ptr == ' ' || *ptr == '\t'; ++ptr);
if (*ptr == 'T') {
find = true;
break;
} else if (*ptr == 'A') {
//TODO: ACTIVATE_EXTRUDER for klipper (if used)
}
// Skip the rest of the line.
for (; *ptr != 0 && *ptr != '\r' && *ptr != '\n'; ++ptr);
// Skip the end of line indicators.
for (; *ptr == '\r' || *ptr == '\n'; ++ptr);
}
}
if (!find) {
fprintf(file, writer.toolchange(tool_ordering.first_extruder()).c_str());
}
}
writer.toolchange(tool_ordering.first_extruder());
}
}
#if ENABLE_THUMBNAIL_GENERATOR
void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thumbnail_cb)
#else
@ -1437,6 +1482,10 @@ void GCode::_do_export(Print &print, FILE *file)
std::string start_gcode = this->placeholder_parser_process("start_gcode", print.config().start_gcode.value, initial_extruder_id);
// Set bed temperature if the start G-code does not contain any bed temp control G-codes.
this->_print_first_layer_bed_temperature(file, print, start_gcode, initial_extruder_id, true);
//init extruders
init_multiextruders(file, print, m_writer, tool_ordering, start_gcode);
// Set extruder(s) temperature before and after start G-code.
this->_print_first_layer_extruder_temperatures(file, print, start_gcode, initial_extruder_id, false);

14
src/libslic3r/GCode/CoolingBuffer.cpp
View File

@ -726,9 +726,17 @@ std::string CoolingBuffer::apply_layer_cooldown(
top_fan_speed = EXTRUDER_CONFIG(top_fan_speed);
ext_peri_fan_speed = EXTRUDER_CONFIG(external_perimeter_fan_speed);
#undef EXTRUDER_CONFIG
bridge_fan_control = bridge_fan_speed > fan_speed_new && bridge_fan_speed != 0;
top_fan_control = top_fan_speed != fan_speed_new && top_fan_speed != 0;
ext_peri_fan_control = ext_peri_fan_speed != fan_speed_new && ext_peri_fan_speed != 0;
// 0 is deprecated for diable: take care of temp settings.
if (bridge_fan_speed == 0) bridge_fan_speed = -1;
if (ext_peri_fan_speed == 0) ext_peri_fan_speed = -1;
if (top_fan_speed == 0) top_fan_speed = -1;
if (bridge_fan_speed == 1) bridge_fan_speed = 0;
if (ext_peri_fan_speed == 1) ext_peri_fan_speed = 0;
if (top_fan_speed == 1) top_fan_speed = 0;
// end deprecation
bridge_fan_control = bridge_fan_speed > fan_speed_new && bridge_fan_speed >= 0;
top_fan_control = top_fan_speed != fan_speed_new && top_fan_speed >= 0;
ext_peri_fan_control = ext_peri_fan_speed != fan_speed_new && ext_peri_fan_speed >= 0;
} else {
bridge_fan_control = false;
bridge_fan_speed = 0;

80
src/libslic3r/GCode/WipeTower.cpp
View File

@ -330,12 +330,13 @@ public:
//add toolchange_temp -skinnydip
WipeTowerWriter& wait_for_toolchange_temp(int tc_temp, bool fan_on, int fan_speed, bool fast)
{
char all[128];
//char all[128];
if (fan_on == true){
set_fan(fan_speed, " ;Part fan on to cool hotend");
}
sprintf(all, "M109 S%d ;SKINNYDIP TOOLCHANGE WAIT FOR TEMP %s\n", tc_temp, fast ? "FAST MODE":"NORMAL MODE");
this->append(all);
//sprintf(all, "M109 S%d ;SKINNYDIP TOOLCHANGE WAIT FOR TEMP %s\n", tc_temp, fast ? "FAST MODE":"NORMAL MODE");
//this->append(all);
set_extruder_temp(tc_temp, this->m_current_tool, true, ";SKINNYDIP TOOLCHANGE WAIT FOR TEMP " + fast ? "FAST MODE" : "NORMAL MODE");
if (fan_on == true){
set_fan(m_last_fan_speed, " ;restore cooling");
}
@ -345,25 +346,65 @@ public:
//begin toolchange_temp -skinnydip
WipeTowerWriter& begin_toolchange_temp(int tc_temp, bool fast)
{
char tdbuf[128];
sprintf(tdbuf, "M104 S%d ;SKINNYDIP BEGIN TOOLCHANGE TEMP %s\n", tc_temp, fast ? "FAST MODE":"NORMAL MODE");
m_gcode += tdbuf;
return *this;
//char tdbuf[128];
//sprintf(tdbuf, "M104 S%d ;SKINNYDIP BEGIN TOOLCHANGE TEMP %s\n", tc_temp, fast ? "FAST MODE":"NORMAL MODE");
//m_gcode += tdbuf;
set_extruder_temp(tc_temp, this->m_current_tool, false, ";SKINNYDIP BEGIN TOOLCHANGE TEMP " + fast ? "FAST MODE" : "NORMAL MODE");
return *this;
}
//restore toolchange_temp -skinnydip
WipeTowerWriter& restore_pre_toolchange_temp(int tc_temp, bool fast)
{
char tdbuf[128];
sprintf(tdbuf, "M104 S%d ;RESTORE PRE-TOOLCHANGE TEMP %s\n", tc_temp, fast ? "FAST MODE":"NORMAL MODE");
m_gcode += tdbuf;
return *this;
//char tdbuf[128];
//sprintf(tdbuf, "M104 S%d ;RESTORE PRE-TOOLCHANGE TEMP %s\n", tc_temp, fast ? "FAST MODE":"NORMAL MODE");
//m_gcode += tdbuf;
set_extruder_temp(tc_temp, this->m_current_tool , false, ";RESTORE PRE-TOOLCHANGE TEMP " + fast ? "FAST MODE" : "NORMAL MODE");
return *this;
}
// Set extruder temperature, don't wait by default.
WipeTowerWriter& set_extruder_temp(int temperature, bool wait = false)
{
m_gcode += "M" + std::to_string(wait ? 109 : 104) + " S" + std::to_string(temperature) + "\n";
WipeTowerWriter& set_extruder_temp(unsigned int temperature, size_t tool, bool wait = false, std::string comment = "")
{
if (wait && (this->m_gcode_flavor == gcfMakerWare || this->m_gcode_flavor == (gcfSailfish)))
return *this;
std::string code;
if (wait && this->m_gcode_flavor != (gcfTeacup) && this->m_gcode_flavor != (gcfRepRap) && this->m_gcode_flavor != (gcfSprinter)) {
code = "M109";
} else {
if (this->m_gcode_flavor == (gcfRepRap)) { // M104 is deprecated on RepRapFirmware
code = "G10";
} else {
code = "M104";
}
}
std::ostringstream gcode;
gcode << code << " ";
if (this->m_gcode_flavor == (gcfMach3) || this->m_gcode_flavor == (gcfMachinekit)) {
gcode << "P";
} else if (this->m_gcode_flavor == (gcfRepRap)) {
gcode << "P" << tool << " S";
} else {
gcode << "S";
}
gcode << temperature;
bool multiple_tools = false; // ?
if (this->m_current_tool != -1 && (multiple_tools || this->m_gcode_flavor == (gcfMakerWare) || this->m_gcode_flavor == (gcfSailfish))) {
if (this->m_gcode_flavor != (gcfRepRap)) {
gcode << " T" << tool;
}
}
if(!comment.empty())
gcode << " ; " << comment << "\n";
if ((this->m_gcode_flavor == (gcfTeacup) || this->m_gcode_flavor == (gcfRepRap)) && wait)
gcode << "M116 ; wait for temperature to be reached\n";
gcode << "\n";
m_gcode += gcode.str();
return *this;
}
@ -685,7 +726,7 @@ std::vector<WipeTower::ToolChangeResult> WipeTower::prime(
toolchange_Wipe(writer, cleaning_box , 20.f);
box_coordinates box = cleaning_box;
box.translate(0.f, writer.y() - cleaning_box.ld.y() + m_perimeter_width);
toolchange_Unload(writer, box , m_filpar[m_current_tool].material, m_filpar[tools[idx_tool + 1]].first_layer_temperature);
toolchange_Unload(writer, box , m_filpar[m_current_tool].material, m_filpar[tools[idx_tool + 1]].first_layer_temperature, idx_tool + 1);
cleaning_box.translate(prime_section_width, 0.f);
writer.travel(cleaning_box.ld, 7200);
}
@ -793,14 +834,14 @@ WipeTower::ToolChangeResult WipeTower::tool_change(size_t tool, bool last_in_lay
// Ram the hot material out of the melt zone, retract the filament into the cooling tubes and let it cool.
if (tool != (unsigned int)-1){ // This is not the last change.
toolchange_Unload(writer, cleaning_box, m_filpar[m_current_tool].material,
m_is_first_layer ? m_filpar[tool].first_layer_temperature : m_filpar[tool].temperature);
m_is_first_layer ? m_filpar[tool].first_layer_temperature : m_filpar[tool].temperature, tool);
toolchange_Change(writer, tool, m_filpar[tool].material); // Change the tool, set a speed override for soluble and flex materials.
toolchange_Load(writer, cleaning_box);
writer.travel(writer.x(), writer.y()-m_perimeter_width); // cooling and loading were done a bit down the road
toolchange_Wipe(writer, cleaning_box, wipe_volume); // Wipe the newly loaded filament until the end of the assigned wipe area.
++ m_num_tool_changes;
} else
toolchange_Unload(writer, cleaning_box, m_filpar[m_current_tool].material, m_filpar[m_current_tool].temperature);
toolchange_Unload(writer, cleaning_box, m_filpar[m_current_tool].material, m_filpar[m_current_tool].temperature, m_current_tool);
m_depth_traversed += wipe_area;
@ -912,7 +953,8 @@ void WipeTower::toolchange_Unload(
WipeTowerWriter &writer,
const box_coordinates &cleaning_box,
const std::string& current_material,
const int new_temperature)
const int new_temperature,
const size_t next_tool)
{
float xl = cleaning_box.ld.x() + 1.f * m_perimeter_width;
float xr = cleaning_box.rd.x() - 1.f * m_perimeter_width;
@ -1039,7 +1081,7 @@ void WipeTower::toolchange_Unload(
if (new_temperature != 0 && (new_temperature != m_old_temperature || m_is_first_layer)) { // Set the extruder temperature, but don't wait.
// If the required temperature is the same as last time, don't emit the M104 again (if user adjusted the value, it would be reset)
// However, always change temperatures on the first layer (this is to avoid issues with priming lines turned off).
writer.set_extruder_temp(new_temperature, false);
writer.set_extruder_temp(new_temperature, next_tool, false);
m_old_temperature = new_temperature;
}
}

3
src/libslic3r/GCode/WipeTower.hpp
View File

@ -367,7 +367,8 @@ private:
WipeTowerWriter &writer,
const box_coordinates &cleaning_box,
const std::string& current_material,
const int new_temperature);
const int new_temperature,
const size_t temp_tool);
void toolchange_Change(
WipeTowerWriter &writer,

8
src/libslic3r/GCodeWriter.cpp
View File

@ -111,15 +111,15 @@ std::string GCodeWriter::set_temperature(unsigned int temperature, bool wait, in
gcode << code << " ";
if (FLAVOR_IS(gcfMach3) || FLAVOR_IS(gcfMachinekit)) {
gcode << "P";
} else if (FLAVOR_IS(gcfRepRap)) {
gcode << "P" << tool << " S";
} else {
gcode << "S";
}
gcode << temperature;
bool multiple_tools = this->multiple_extruders && ! m_single_extruder_multi_material;
if (tool != -1 && (multiple_tools || FLAVOR_IS(gcfMakerWare) || FLAVOR_IS(gcfSailfish)) ) {
if (FLAVOR_IS(gcfRepRap)) {
gcode << " P" << tool;
} else {
if (FLAVOR_IS_NOT(gcfRepRap)) {
gcode << " T" << tool;
}
}
@ -227,7 +227,7 @@ std::string GCodeWriter::write_acceleration(){
if (FLAVOR_IS(gcfRepetier)) {
// M201: Set max printing acceleration
gcode << "M201 X" << m_current_acceleration << " Y" << m_current_acceleration;
} else if(FLAVOR_IS(gcfMarlin) || FLAVOR_IS(gcfLerdge)){
} else if(FLAVOR_IS(gcfMarlin) || FLAVOR_IS(gcfLerdge) || FLAVOR_IS(gcfRepRap) || FLAVOR_IS(gcfSprinter)){
// M204: Set printing acceleration
gcode << "M204 P" << m_current_acceleration;
} else {

22
src/libslic3r/Model.cpp
View File

@ -389,7 +389,7 @@ static bool _arrange(const Pointfs &sizes, coordf_t dist, const BoundingBoxf* bb
/* arrange objects preserving their instance count
but altering their instance positions */
bool Model::arrange_objects(const Print &print, const BoundingBoxf* bb)
bool Model::arrange_objects(const PrintBase *print, const BoundingBoxf* bb)
{
size_t count = 0;
for (auto obj : objects) count += obj->instances.size();
@ -1823,7 +1823,7 @@ void ModelInstance::transform_polygon(Polygon* polygon) const
polygon->scale(get_scaling_factor(X), get_scaling_factor(Y)); // scale around polygon origin
}
arrangement::ArrangePolygon ModelInstance::get_arrange_polygon(const Print& print) const
arrangement::ArrangePolygon ModelInstance::get_arrange_polygon(const PrintBase *print_base) const
{
static const double SIMPLIFY_TOLERANCE_MM = 0.1;
@ -1841,13 +1841,17 @@ arrangement::ArrangePolygon ModelInstance::get_arrange_polygon(const Print& prin
// https://github.com/prusa3d/PrusaSlicer/issues/2209
if (!p.points.empty()) {
Polygons pp{p};
//grow
double dist = print.config().min_object_distance(&print.full_print_config());
std::cout << "min_object_distance = " << dist << "\n";
pp = offset(pp, scale_(dist));
//simplify
if (!pp.empty())
pp = pp.front().simplify(scaled<double>(SIMPLIFY_TOLERANCE_MM));
if (const Print* print = dynamic_cast<const Print*>(print_base))
{
//grow
double dist = print->config().min_object_distance(&print->full_print_config());
std::cout << "min_object_distance = " << dist << "\n";
pp = offset(pp, scale_(dist));
//simplify
if (!pp.empty())
pp = pp.front().simplify(scaled<double>(SIMPLIFY_TOLERANCE_MM));
}else
pp = p.simplify(scaled<double>(SIMPLIFY_TOLERANCE_MM));
if (!pp.empty()) p = pp.front();
}

5
src/libslic3r/Model.hpp
View File

@ -37,6 +37,7 @@ class ModelMaterial;
class ModelObject;
class ModelVolume;
class ModelWipeTower;
class PrintBase;
class Print;
class SLAPrint;
@ -667,7 +668,7 @@ public:
bool is_printable() const { return object->printable && printable && (print_volume_state == PVS_Inside); }
// Getting the input polygon for arrange
arrangement::ArrangePolygon get_arrange_polygon(const Print& print) const;
arrangement::ArrangePolygon get_arrange_polygon(const PrintBase* print) const;
// Apply the arrange result on the ModelInstance
void apply_arrange_result(const Vec2crd& offs, double rotation)
@ -804,7 +805,7 @@ public:
bool center_instances_around_point(const Vec2d &point);
void translate(coordf_t x, coordf_t y, coordf_t z) { for (ModelObject *o : this->objects) o->translate(x, y, z); }
TriangleMesh mesh() const;
bool arrange_objects(const Print& print, const BoundingBoxf* bb = NULL);
bool arrange_objects(const PrintBase* print, const BoundingBoxf* bb = NULL);
// Croaks if the duplicated objects do not fit the print bed.
void duplicate(size_t copies_num, coordf_t dist, const BoundingBoxf* bb = NULL);
void duplicate_objects(size_t copies_num, coordf_t dist, const BoundingBoxf* bb = NULL);

18
src/libslic3r/PerimeterGenerator.cpp
View File

@ -900,13 +900,20 @@ void PerimeterGenerator::process()
this->fill_surfaces->append(infill_exp, stPosInternal | stDensSparse);
if (infill_peri_overlap != 0) {
ExPolygons polyWithoutOverlap = offset2_ex(
not_filled_exp,
-inset - infill_gap - min_perimeter_infill_spacing / 2,
(float) min_perimeter_infill_spacing / 2);
ExPolygons polyWithoutOverlap;
if (min_perimeter_infill_spacing / 2 > infill_peri_overlap)
polyWithoutOverlap = offset2_ex(
not_filled_exp,
-inset - infill_gap - min_perimeter_infill_spacing / 2 + infill_peri_overlap,
(float)min_perimeter_infill_spacing / 2 - infill_peri_overlap);
else
polyWithoutOverlap = offset_ex(
not_filled_exp,
-inset - infill_gap);
if (!top_fills.empty()) {
polyWithoutOverlap = union_ex(polyWithoutOverlap, top_infill_exp);
this->fill_no_overlap.insert(this->fill_no_overlap.end(), polyWithoutOverlap.begin(), polyWithoutOverlap.end());
}
this->fill_no_overlap.insert(this->fill_no_overlap.end(), polyWithoutOverlap.begin(), polyWithoutOverlap.end());
/*{
std::stringstream stri;
stri << this->layer->id() << "_2_end_makeperimeter_" << this->layer->id() << ".svg";
@ -919,7 +926,6 @@ void PerimeterGenerator::process()
svg.draw(to_polylines(top_infill_exp), "orange");
svg.Close();
}*/
}
}
} // for each island
}

30
src/libslic3r/PrintConfig.cpp
View File

@ -270,9 +270,11 @@ void PrintConfigDef::init_fff_params()
def->label = L("Bridges fan speed");
def->category = OptionCategory::cooling;
def->tooltip = L("This fan speed is enforced during all bridges and overhangs. It won't slow down the fan if it's currently running at a higher speed."
"\nSet to 0 to disable this override. Can only be overriden by disable_fan_first_layers.");
"\nSet to 1 to disable the fan."
"\nSet to -1 to disable this override."
"\nCan only be overriden by disable_fan_first_layers.");
def->sidetext = L("%");
def->min = 0;
def->min = -1;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts { 100 });
@ -281,12 +283,14 @@ void PrintConfigDef::init_fff_params()
def->label = L("Top fan speed");
def->category = OptionCategory::cooling;
def->tooltip = L("This fan speed is enforced during all top fills."
"\nSet to 0 to disable this override. Can only be overriden by disable_fan_first_layers.");
"\nSet to 1 to disable the fan."
"\nSet to -1 to disable this override."
"\nCan only be overriden by disable_fan_first_layers.");
def->sidetext = L("%");
def->min = 0;
def->min = -1;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts{ 0 });
def->set_default_value(new ConfigOptionInts{ -1 });
def = this->add("bridge_flow_ratio", coPercent);
def->label = L("Bridge");
@ -764,14 +768,15 @@ void PrintConfigDef::init_fff_params()
def = this->add("external_perimeter_fan_speed", coInts);
def->label = L("External perimeter fan speed");
def->tooltip = L("When set to a non-zero value this fan speed is used only for external perimeters (visible ones). "
"When set to zero the normal fan speed is used on external perimeters. "
"\nSet to 1 to disable the fan."
"\nSet to -1 to use the normal fan speed on external perimeters."
"External perimeters can benefit from higher fan speed to improve surface finish, "
"while internal perimeters, infill, etc. benefit from lower fan speed to improve layer adhesion.");
def->sidetext = L("%");
def->min = 0;
def->min = -1;
def->max = 100;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInts { 0 });
def->set_default_value(new ConfigOptionInts { -1 });
def = this->add("external_perimeter_overlap", coPercent);
def->label = L("external perimeter overlap");
@ -1293,7 +1298,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloats{ 1.75 });
def = this->add("filament_shrink", coPercents);
def->label = L("Shrikage");
def->label = L("Shrinkage");
def->tooltip = L("Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm)."
" The part will be scaled in xy to conpensate."
" Only the filament used for the perimeter is taken into account."
@ -1491,7 +1496,9 @@ void PrintConfigDef::init_fff_params()
def->full_label = L("First layer flow ratio");
def->sidetext = L("%");
def->category = OptionCategory::width;
def->tooltip = L("You can increase this to over-extrude on the first layer if there are not enough plastic because your bed isn't levelled.");
def->tooltip = L("You can increase this to over-extrude on the first layer if there are not enough plastic because your bed isn't levelled."
"\nNote: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED!"
" Use this setting only as last resort after all calibrations failed.");
def->min = 0;
def->mode = comExpert;
def->set_default_value(new ConfigOptionPercent(100));
@ -4544,6 +4551,9 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
float v = boost::lexical_cast<float>(value);
if (v > 0)
value = boost::lexical_cast<std::string>(-v);
} else if (opt_key == "thumbnails") {
if (value.empty())
value = "0x0,0x0";
} else if (opt_key == "z_steps_per_mm") {
opt_key = "z_step";
float v = boost::lexical_cast<float>(value);

15
src/libslic3r/PrintConfig.hpp
View File

@ -48,8 +48,19 @@ enum WipeAlgo {
};
enum GCodeFlavor : uint8_t {
gcfRepRap, gcfRepetier, gcfTeacup, gcfMakerWare, gcfMarlin, gcfKlipper, gcfSailfish, gcfMach3, gcfMachinekit,
gcfSmoothie, gcfSprinter, gcfNoExtrusion, gcfLerdge,
gcfRepRap,
gcfRepetier,
gcfTeacup,
gcfMakerWare,
gcfMarlin,
gcfKlipper,
gcfSailfish,
gcfMach3,
gcfMachinekit,
gcfSmoothie,
gcfSprinter,
gcfNoExtrusion,
gcfLerdge,
};
enum PrintHostType {

2
src/libslic3r/Slicing.cpp
View File

@ -32,7 +32,7 @@ coordf_t check_z_step(const coordf_t val, const coordf_t z_step) {
//return int((val + z_step * 0.5) / z_step) * z_step;
}
inline bool test_z_step(const coordf_t val, const coordf_t z_step) {
if (z_step <= EPSILON) return val;
if (z_step <= EPSILON) return true;
uint64_t valint = uint64_t(val * 100000000. + 0.1);
uint64_t stepint = uint64_t(z_step * 100000000. + 0.1);
return valint % stepint == 0;

14
src/slic3r/GUI/Plater.cpp
View File

@ -1522,7 +1522,7 @@ struct Plater::priv
apply_wipe_tower();
}
ArrangePolygon get_arrange_polygon(const Print &print) const
ArrangePolygon get_arrange_polygon(const PrintBase *print) const
{
Polygon p({
{coord_t(0), coord_t(0)},
@ -1627,7 +1627,8 @@ struct Plater::priv
// Set up arrange polygon for a ModelInstance and Wipe tower
template<class T> ArrangePolygon get_arrange_poly(T *obj) const {
ArrangePolygon ap = obj->get_arrange_polygon(this->plater().fff_print);
ArrangePolygon ap = obj->get_arrange_polygon(
this->plater().printer_technology == ptFFF ? (PrintBase*)&this->plater().fff_print : (PrintBase*)&this->plater().sla_print);
ap.priority = 0;
ap.bed_idx = ap.translation.x() / bed_stride();
ap.setter = [obj, this](const ArrangePolygon &p) {
@ -2888,7 +2889,8 @@ void Plater::priv::find_new_position(const ModelInstancePtrs &instances,
for (const ModelObject *mo : model.objects)
for (const ModelInstance *inst : mo->instances) {
auto it = std::find(instances.begin(), instances.end(), inst);
auto arrpoly = inst->get_arrange_polygon(this->fff_print);
arrangement::ArrangePolygon arrpoly = inst->get_arrange_polygon(
this->printer_technology == ptFFF ? (PrintBase*)&this->fff_print : (PrintBase*)&this->sla_print);
if (it == instances.end())
fixed.emplace_back(std::move(arrpoly));
@ -2897,7 +2899,8 @@ void Plater::priv::find_new_position(const ModelInstancePtrs &instances,
}
if (updated_wipe_tower())
fixed.emplace_back(wipetower.get_arrange_polygon(this->fff_print));
fixed.emplace_back(wipetower.get_arrange_polygon(
this->printer_technology == ptFFF ? (PrintBase*)&this->fff_print : (PrintBase*)&this->sla_print));
arrangement::arrange(movable, fixed, min_d, get_bed_shape_hint());
@ -4660,6 +4663,9 @@ const Print& Plater::fff_print() const { return p->fff_print; }
Print& Plater::fff_print() { return p->fff_print; }
const SLAPrint& Plater::sla_print() const { return p->sla_print; }
SLAPrint& Plater::sla_print() { return p->sla_print; }
const PrintBase* Plater::current_print() const {
return printer_technology() == ptFFF ? (PrintBase*)&p->fff_print : (PrintBase*)&p->sla_print;
}
void Plater::new_project()
{

2
src/slic3r/GUI/Plater.hpp
View File

@ -25,6 +25,7 @@ namespace Slic3r {
class Model;
class ModelObject;
class PrintBase;
class Print;
class SLAPrint;
enum SLAPrintObjectStep : unsigned int;
@ -150,6 +151,7 @@ public:
Print& fff_print();
const SLAPrint& sla_print() const;
SLAPrint& sla_print();
const PrintBase* current_print() const;
void new_project();
void load_project();

89
src/slic3r/GUI/PresetHints.cpp
View File

@ -29,19 +29,27 @@ std::string PresetHints::cooling_description(const Preset &preset)
int max_speed_reduc = int(preset.config.opt_float("max_speed_reduction", 0));
int fan_below_layer_time = preset.config.opt_int("fan_below_layer_time", 0);
//for the time being, -1 shoudl eb for disabel, but it's 0 from legacy.
if (top_fan_speed == 0) top_fan_speed = -1;
if (bridge_fan_speed == 0) bridge_fan_speed = -1;
if (ext_peri_fan_speed == 0) ext_peri_fan_speed = -1;
if (top_fan_speed == 1) top_fan_speed = 0;
if (bridge_fan_speed == 1) bridge_fan_speed = 0;
if (ext_peri_fan_speed == 1) ext_peri_fan_speed = 0;
//if (preset.config.opt_bool("cooling", 0)) {
out = _utf8(L("Fan"));
if (preset.config.opt_bool("fan_always_on", 0)) {
out += " " + (boost::format(_utf8(L("will run at %1%%% by default"))) % min_fan_speed).str() ;
if (ext_peri_fan_speed > 0 && ext_peri_fan_speed != min_fan_speed) {
if (ext_peri_fan_speed >= 0 && ext_peri_fan_speed != min_fan_speed) {
out += ", " + (boost::format(_utf8(L("at %1%%% over external perimeters"))) % ext_peri_fan_speed).str();
}
if (top_fan_speed > 0 && top_fan_speed != min_fan_speed) {
if (top_fan_speed >= 0 && top_fan_speed != min_fan_speed) {
out += ", " + (boost::format(_utf8(L("at %1%%% over top fill surfaces"))) % top_fan_speed).str();
}
if (bridge_fan_speed > 0 && bridge_fan_speed > min_fan_speed) {
if (bridge_fan_speed >= 0 && bridge_fan_speed > min_fan_speed) {
out += ", " + (boost::format(_utf8(L("at %1%%% over bridges"))) % bridge_fan_speed).str();
}
if (disable_fan_first_layers > 1)
@ -66,7 +74,7 @@ std::string PresetHints::cooling_description(const Preset &preset)
} else if (ext_peri_fan_speed > min_fan_speed) {
out += ", " + (boost::format(_utf8(L("at %1%%% over external perimeters"))) % ext_peri_fan_speed).str() + " " + L("if it's above the current computed fan speed value");
}
if (top_fan_speed > 0) {
if (top_fan_speed >= 0) {
out += ", " + (boost::format(_utf8(L("at %1%%% over top fill surfaces"))) % top_fan_speed).str();
}
if (bridge_fan_speed > max_fan_speed) {
@ -108,6 +116,17 @@ std::string PresetHints::cooling_description(const Preset &preset)
% min_print_speed).str();
}
//tooltip for Depractaed values
bridge_fan_speed = preset.config.opt_int("bridge_fan_speed", 0);
ext_peri_fan_speed = preset.config.opt_int("external_perimeter_fan_speed", 0);
top_fan_speed = preset.config.opt_int("top_fan_speed", 0);
if (top_fan_speed == 0)
out += "\n\n!!! 0 for the Top fan speed is Deprecated, please set it to -1 to disable it !!!";
if (ext_peri_fan_speed == 0)
out += "\n\n!!! 0 for the External perimeters fan speed is Deprecated, please set it to -1 to disable it !!!";
if (bridge_fan_speed == 0)
out += "\n\n!!! 0 for the Bridge fan speed is Deprecated, please set it to -1 to disable it !!!";
return out;
}
@ -294,27 +313,27 @@ std::string PresetHints::maximum_volumetric_flow_description(const PresetBundle
return out;
}
std::string PresetHints::recommended_thin_wall_thickness(const PresetBundle &preset_bundle)
std::string PresetHints::recommended_thin_wall_thickness(const PresetBundle& preset_bundle)
{
const DynamicPrintConfig &print_config = preset_bundle.prints .get_edited_preset().config;
const DynamicPrintConfig &printer_config = preset_bundle.printers .get_edited_preset().config;
const DynamicPrintConfig& print_config = preset_bundle.prints.get_edited_preset().config;
const DynamicPrintConfig& printer_config = preset_bundle.printers.get_edited_preset().config;
float layer_height = float(print_config.opt_float("layer_height"));
int num_perimeters = print_config.opt_int("perimeters");
bool thin_walls = print_config.opt_bool("thin_walls");
float nozzle_diameter = float(printer_config.opt_float("nozzle_diameter", 0));
float layer_height = float(print_config.opt_float("layer_height"));
int num_perimeters = print_config.opt_int("perimeters");
bool thin_walls = print_config.opt_bool("thin_walls");
float nozzle_diameter = float(printer_config.opt_float("nozzle_diameter", 0));
std::string out;
if (layer_height <= 0.f) {
out += _utf8(L("Recommended object min thin wall thickness: Not available due to invalid layer height."));
return out;
}
if (layer_height <= 0.f) {
out += _utf8(L("Recommended object min thin wall thickness: Not available due to invalid layer height."));
return out;
}
Flow external_perimeter_flow = Flow::new_from_config_width(
Flow external_perimeter_flow = Flow::new_from_config_width(
frExternalPerimeter,
*print_config.opt<ConfigOptionFloatOrPercent>("external_perimeter_extrusion_width"),
nozzle_diameter, layer_height, false);
Flow perimeter_flow = Flow::new_from_config_width(
Flow perimeter_flow = Flow::new_from_config_width(
frPerimeter,
*print_config.opt<ConfigOptionFloatOrPercent>("perimeter_extrusion_width"),
nozzle_diameter, layer_height, false);
@ -329,18 +348,46 @@ std::string PresetHints::recommended_thin_wall_thickness(const PresetBundle &pre
out += (boost::format(_utf8(L("%d perimeter: %.2f mm"))) % 1 % (external_perimeter_flow.width + external_perimeter_flow.spacing())).str() + " ";
// Start with the width of two closely spaced
try {
double width = 2*(external_perimeter_flow.width + external_perimeter_flow.spacing(perimeter_flow));
for (int i = 2; i <= num_lines; thin_walls ? ++ i : i ++) {
out += ", " + (boost::format(_utf8(L("%d perimeter: %.2f mm"))) % i % width).str() + " ";
double width = 2 * (external_perimeter_flow.width + external_perimeter_flow.spacing(perimeter_flow));
for (int i = 2; i <= num_lines; thin_walls ? ++i : i++) {
out += ", " + (boost::format(_utf8(L("%d perimeter: %.2f mm"))) % i % width).str() + " ";
width += perimeter_flow.spacing() * 2;
}
} catch (const FlowErrorNegativeSpacing &) {
}
catch (const FlowErrorNegativeSpacing&) {
out = _utf8(L("Recommended object thin wall thickness: Not available due to excessively small extrusion width."));
}
}
return out;
}
std::string PresetHints::recommended_extrusion_width(const PresetBundle& preset_bundle)
{
const DynamicPrintConfig& print_config = preset_bundle.prints.get_edited_preset().config;
const DynamicPrintConfig& printer_config = preset_bundle.printers.get_edited_preset().config;
int nb_nozzles = printer_config.option<ConfigOptionFloats>("nozzle_diameter")->values.size();
double nozzle_diameter = 0;
for(int i=0; i< nb_nozzles; i++)
nozzle_diameter = std::max(nozzle_diameter, printer_config.opt_float("nozzle_diameter", i));
double layer_height = print_config.opt_float("layer_height");
double first_layer_height = print_config.option<ConfigOptionFloatOrPercent>("first_layer_height")->get_abs_value(nozzle_diameter);
std::string out;
Flow first_layer_flow = Flow::new_from_spacing(nozzle_diameter, nozzle_diameter, first_layer_height, false);
Flow layer_flow = Flow::new_from_spacing(nozzle_diameter, nozzle_diameter, layer_height, false);
out += _utf8(L("Ideally, the spacing between two extrusions shouldn't be lower than the nozzle diameter. Below are the extrusion widths for a spacing equal to the nozzle diameter.\n"));
out += (boost::format(_utf8(L("Recommended min extrusion width for the first layer (with a first layer height of %1%) is %2$.3f mm (or %3%%%)\n")))
% first_layer_height % first_layer_flow.width % int(first_layer_flow.width * 100. / nozzle_diameter)).str();
out += (boost::format(_utf8(L("Recommended min extrusion width for other layers (with a layer height of %1%) is %2$.3f mm (or %3%%%).\n")))
% layer_height % layer_flow.width % int(layer_flow.width * 100. / nozzle_diameter)).str();
return out;
}
// Produce a textual explanation of the combined effects of the top/bottom_solid_layers
// versus top/bottom_min_shell_thickness. Which of the two values wins depends

8
src/slic3r/GUI/PresetHints.hpp
View File

@ -22,12 +22,16 @@ public:
// Produce a textual description of a recommended thin wall thickness
// from the provided number of perimeters and the external / internal perimeter width.
static std::string recommended_thin_wall_thickness(const PresetBundle &preset_bundle);
static std::string recommended_thin_wall_thickness(const PresetBundle& preset_bundle);
// Produce a textual description of a recommended extrusion width
// from the provided layer height
static std::string recommended_extrusion_width(const PresetBundle& preset_bundle);
// Produce a textual explanation of the combined effects of the top/bottom_solid_layers
// versus top/bottom_min_shell_thickness. Which of the two values wins depends
// on the active layer height.
static std::string top_bottom_shell_thickness_explanation(const PresetBundle &preset_bundle);
static std::string top_bottom_shell_thickness_explanation(const PresetBundle& preset_bundle);
};
} // namespace Slic3r

69
src/slic3r/GUI/Tab.cpp
View File

@ -1313,13 +1313,7 @@ bool Tab::create_pages(std::string setting_type_name, int idx_page)
TabPrinter* tab = nullptr;
if ((tab = dynamic_cast<TabPrinter*>(this)) == nullptr) continue;
current_group->m_on_change = set_or_add(current_group->m_on_change, [this, tab](t_config_option_key opt_key, boost::any value) {
if (opt_key == "silent_mode") {
bool val = boost::any_cast<bool>(value);
if (tab->m_use_silent_mode != val) {
tab->m_rebuild_kinematics_page = true;
tab->m_use_silent_mode = val;
}
}
tab->update_fff(); //check for kinematic rebuild
tab->build_unregular_pages();
});
}
@ -1499,6 +1493,16 @@ bool Tab::create_pages(std::string setting_type_name, int idx_page)
};
current_group->append_line(current_line);
}
else if (boost::starts_with(full_line, "recommended_extrusion_width_description")) {
TabPrint* tab = nullptr;
if ((tab = dynamic_cast<TabPrint*>(this)) == nullptr) continue;
current_line = { "", "" };
current_line.full_width = 1;
current_line.widget = [this, tab](wxWindow* parent) {
return description_line_widget(parent, &(tab->m_recommended_extrusion_width_description_line));
};
current_group->append_line(current_line);
}
else if (boost::starts_with(full_line, "top_bottom_shell_thickness_explanation")) {
TabPrint* tab = nullptr;
if ((tab = dynamic_cast<TabPrint*>(this)) == nullptr) continue;
@ -1706,6 +1710,9 @@ void TabPrint::update()
if (m_recommended_thin_wall_thickness_description_line)
m_recommended_thin_wall_thickness_description_line->SetText(
from_u8(PresetHints::recommended_thin_wall_thickness(*m_preset_bundle)));
if (m_recommended_extrusion_width_description_line)
m_recommended_extrusion_width_description_line->SetText(
from_u8(PresetHints::recommended_extrusion_width(*m_preset_bundle)));
if(m_top_bottom_shell_thickness_explanation)
m_top_bottom_shell_thickness_explanation->SetText(
from_u8(PresetHints::top_bottom_shell_thickness_explanation(*m_preset_bundle)));
@ -1731,6 +1738,9 @@ void TabPrint::OnActivate()
if (m_recommended_thin_wall_thickness_description_line)
m_recommended_thin_wall_thickness_description_line->SetText(
from_u8(PresetHints::recommended_thin_wall_thickness(*m_preset_bundle)));
if (m_recommended_extrusion_width_description_line)
m_recommended_extrusion_width_description_line->SetText(
from_u8(PresetHints::recommended_extrusion_width(*m_preset_bundle)));
if(m_top_bottom_shell_thickness_explanation)
m_top_bottom_shell_thickness_explanation->SetText(
from_u8(PresetHints::top_bottom_shell_thickness_explanation(*m_preset_bundle)));
@ -2150,14 +2160,18 @@ void TabPrinter::milling_count_changed(size_t milling_count)
//}
}
void TabPrinter::append_option_line_kinematics(ConfigOptionsGroupShp optgroup, const std::string opt_key)
void TabPrinter::append_option_line_kinematics(ConfigOptionsGroupShp optgroup, const std::string opt_key, const std::string override_sidetext)
{
Option option = optgroup->get_option(opt_key, 0);
if (!override_sidetext.empty())
option.opt.sidetext = override_sidetext;
Line line = Line{ _(option.opt.full_label), "" };
option.opt.width = 10;
line.append_option(option);
if (m_use_silent_mode) {
option = optgroup->get_option(opt_key, 1);
if (!override_sidetext.empty())
option.opt.sidetext = override_sidetext;
option.opt.width = 10;
line.append_option(option);
}
@ -2214,27 +2228,34 @@ PageShp TabPrinter::build_kinematics_page()
std::vector<std::string> axes{ "x", "y", "z", "e" };
optgroup = page->new_optgroup(_(L("Maximum feedrates")));
for (const std::string &axis : axes) {
for (const std::string& axis : axes) {
if (m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value == gcfRepRap)
append_option_line_kinematics(optgroup, "machine_max_feedrate_" + axis, "mm/min");
else
append_option_line_kinematics(optgroup, "machine_max_feedrate_" + axis);
}
}
optgroup = page->new_optgroup(_(L("Maximum accelerations")));
for (const std::string &axis : axes) {
append_option_line_kinematics(optgroup, "machine_max_acceleration_" + axis);
}
append_option_line_kinematics(optgroup, "machine_max_acceleration_extruding");
append_option_line_kinematics(optgroup, "machine_max_acceleration_retracting");
append_option_line_kinematics(optgroup, "machine_max_acceleration_travel");
for (const std::string& axis : axes) {
append_option_line_kinematics(optgroup, "machine_max_acceleration_" + axis);
}
append_option_line_kinematics(optgroup, "machine_max_acceleration_extruding");
append_option_line_kinematics(optgroup, "machine_max_acceleration_retracting");
append_option_line_kinematics(optgroup, "machine_max_acceleration_travel");
optgroup = page->new_optgroup(_(L("Jerk limits")));
for (const std::string &axis : axes) {
append_option_line_kinematics(optgroup, "machine_max_jerk_" + axis);
}
for (const std::string& axis : axes) {
append_option_line_kinematics(optgroup, "machine_max_jerk_" + axis);
}
optgroup = page->new_optgroup(_(L("Minimum feedrates")));
append_option_line_kinematics(optgroup, "machine_min_extruding_rate");
append_option_line_kinematics(optgroup, "machine_min_travel_rate");
if (m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value == gcfRepRap){
append_option_line_kinematics(optgroup, "machine_min_extruding_rate", "mm/min");
append_option_line_kinematics(optgroup, "machine_min_travel_rate", "mm/min");
} else {
append_option_line_kinematics(optgroup, "machine_min_extruding_rate");
append_option_line_kinematics(optgroup, "machine_min_travel_rate");
}
return page;
}
@ -2491,8 +2512,8 @@ void TabPrinter::update_fff()
else
GCodeWriter::PausePrintCode = "M601";
if (m_is_marlin != is_marlin_flavor) {
m_is_marlin = is_marlin_flavor;
if (m_last_gcode_flavor != uint8_t(m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value)) {
m_last_gcode_flavor = uint8_t(m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value);
m_rebuild_kinematics_page = true;
}

5
src/slic3r/GUI/Tab.hpp
View File

@ -338,6 +338,7 @@ public:
~TabPrint() {}
ogStaticText* m_recommended_thin_wall_thickness_description_line = nullptr;
ogStaticText* m_recommended_extrusion_width_description_line = nullptr;
ogStaticText* m_top_bottom_shell_thickness_explanation = nullptr;
bool m_support_material_overhangs_queried = false;
@ -383,9 +384,9 @@ public:
void build_printhost(ConfigOptionsGroup *optgroup);
bool m_has_single_extruder_MM_page = false;
bool m_is_marlin = false;
uint8_t m_last_gcode_flavor = uint8_t(255);
bool m_use_silent_mode = false;
void append_option_line_kinematics(ConfigOptionsGroupShp optgroup, const std::string opt_key);
void append_option_line_kinematics(ConfigOptionsGroupShp optgroup, const std::string opt_key, const std::string override_units = "");
bool m_rebuild_kinematics_page = false;
wxButton* m_serial_test_btn = nullptr;

2
tests/fff_print/test_data.cpp
View File

@ -174,7 +174,7 @@ void init_print(std::vector<TriangleMesh> &&meshes, Slic3r::Print &print, Slic3r
}
print.apply(model, config);
model.arrange_objects(print);
model.arrange_objects(&print);
print.apply(model, config);
print.validate();
print.set_status_silent();

2
tests/fff_print/test_model.cpp
View File

@ -42,7 +42,7 @@ SCENARIO("Model construction", "[Model]") {
}
model_object->add_instance();
print.apply(model, config); // apply config for arrange_objects
model.arrange_objects(print);
model.arrange_objects(&print);
model.center_instances_around_point(Slic3r::Vec2d(100, 100));
model_object->ensure_on_bed();
print.auto_assign_extruders(model_object);

2
tests/superslicerlibslic3r/test_complete_objects.cpp
View File

@ -37,7 +37,7 @@ std::unique_ptr<Print> init_print_with_dist(DynamicPrintConfig &config, float di
if (distance <= 0) {
print->apply(model, config);
model.arrange_objects(*print);// print->config().min_object_distance(&print->config(), 999999));
model.arrange_objects(&*print);// print->config().min_object_distance(&print->config(), 999999));
model.center_instances_around_point(Slic3r::Vec2d(100, 100));
}

4
tests/superslicerlibslic3r/test_data.cpp
View File

@ -287,7 +287,7 @@ void init_print(Print& print, std::initializer_list<TestMesh> meshes, Slic3r::Mo
}
print.apply(model, config); // apply config for the arrange_objects
model.arrange_objects(print);
model.arrange_objects(&print);
model.center_instances_around_point(Slic3r::Vec2d(100,100));
for (auto* mo : model.objects) {
print.auto_assign_extruders(mo);
@ -323,7 +323,7 @@ void init_print(Print& print, std::vector<TriangleMesh> meshes, Slic3r::Model& m
}
print.apply(model, config); // apply config for the arrange_objects
model.arrange_objects(print);
model.arrange_objects(&print);
model.center_instances_around_point(Slic3r::Vec2d(100,100));
print.apply(model, config);
for (ModelObject* mo : model.objects) {