mirror of
https://git.mirrors.martin98.com/https://github.com/slic3r/Slic3r.git
synced 2025-07-16 23:11:50 +08:00
Add arcwelderlib source as a module and remove profiles in preparation to add a module.
This commit is contained in:
Joseph Lenox
parent
65c7b45cf8
commit
e74b712f50
3
.gitmodules
vendored
Normal file
3
.gitmodules
vendored
Normal file
@ -0,0 +1,3 @@
|
||||
[submodule "src/ArcWelderLib"]
|
||||
path = src/ArcWelderLib
|
||||
url = https://github.com/FormerLurker/ArcWelderLib.git
|
||||
@ -1,10 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.6 Reduced max print height for Predator. Updated end g-code, before layer change g-code and output filename format for Kossel.
|
||||
0.0.5-susi remove resolution to use default
|
||||
0.0.5 Updated end g-code.
|
||||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.4 Fixed predator output filaname format, infill overlap.
|
||||
0.0.3 Fixed infill_overlap, start_gcode, end_gcode for Anycubic Predator
|
||||
0.0.2 Added Anycubic Predator
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.1 Initial Version
|
||||
File diff suppressed because one or more lines are too long
Binary file not shown.
|
Before Width: | Height: | Size: 207 KiB |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 38 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 45 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 135 KiB |
Binary file not shown.
@ -1,18 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.5-susi remove resolution to use default
|
||||
0.0.5 General print quality improvements (??)
|
||||
0.0.4 superslicer: remove top_fan_speed
|
||||
0.0.3 slic3r++ adaptation: overlapping & top pattern.
|
||||
0.0.2 changed flow ratio from float to %
|
||||
0.0.1 Multiple Print models were unified into a single one.
|
||||
0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
|
||||
0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
|
||||
0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
|
||||
0.0.1-alpha12 github repo created for version history
|
||||
0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
|
||||
0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 12.2.0
|
||||
min_slic3r_version = 2.1.0
|
||||
0.0.1-alpha Initial version
|
||||
@ -1,858 +0,0 @@
|
||||
# Print profiles for the BIBO printers.
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = BIBO
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.5-susi
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:BIBO2]
|
||||
name = BIBO2 Touch
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = BIBO2
|
||||
bed_model = BIBO2_bed.stl
|
||||
bed_texture = BIBO2.svg
|
||||
default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2; Prusament PLA @BIBO2; Prusament PETG @BIBO2
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 95%
|
||||
bridge_speed = 20
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
dont_support_bridges = 1
|
||||
first_layer_size_compensation = 0
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.40
|
||||
external_perimeter_speed = 25
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 12
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = grid
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 15
|
||||
gcode_comments = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 20%
|
||||
interface_shells = 0
|
||||
max_print_speed = 60
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_one_perimeter_top = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
|
||||
perimeters = 2
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 3
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.40
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance_type = filament
|
||||
support_material_contact_distance_top = 0.15
|
||||
support_material_contact_distance_bottom = 0.15
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 40
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_perimeters = 0
|
||||
thin_walls = 1
|
||||
thin_walls_min_width = 50%
|
||||
thin_walls_overlap = 50%
|
||||
top_fill_pattern = smooth
|
||||
top_infill_extrusion_width = 0.40
|
||||
top_solid_infill_speed = 20
|
||||
travel_speed = 130
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 50
|
||||
wipe_tower_y = 50
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:*0.05mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 10
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 70%
|
||||
default_acceleration = 500
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 20%
|
||||
first_layer_acceleration = 250
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 30
|
||||
max_print_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.05
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 30
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 15
|
||||
|
||||
[print:*0.07mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 8
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 70%
|
||||
bridge_speed = 20
|
||||
default_acceleration = 1000
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 15%
|
||||
first_layer_acceleration = 500
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 40
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.07
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
top_solid_layers = 11
|
||||
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
bridge_flow_ratio = 70%
|
||||
layer_height = 0.1
|
||||
perimeter_acceleration = 800
|
||||
top_solid_layers = 9
|
||||
|
||||
[print:*0.12mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.12
|
||||
perimeters = 3
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 50
|
||||
layer_height = 0.15
|
||||
perimeter_acceleration = 800
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.20
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:*0.24mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.24
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*0.28mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.28
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*0.30mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 95%
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 60
|
||||
layer_height = 0.3
|
||||
perimeter_acceleration = 800
|
||||
perimeter_speed = 50
|
||||
solid_infill_speed = 50
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*soluble_support*]
|
||||
inherits = *common*
|
||||
overhangs = 1
|
||||
skirts = 0
|
||||
support_material = 1
|
||||
support_material_contact_distance = 0
|
||||
support_material_extruder = 2
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_extruder = 2
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0.1
|
||||
support_material_synchronize_layers = 1
|
||||
support_material_threshold = 80
|
||||
support_material_with_sheath = 1
|
||||
wipe_tower_bridging = 6
|
||||
support_material_interface_speed = 80%
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.05mm ULTRADETAIL @BIBO2]
|
||||
inherits = *0.05mm*
|
||||
# alias = 0.05mm ULTRADETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.07mm SUPERDETAIL @BIBO2]
|
||||
inherits = *0.07mm*
|
||||
# alias = 0.07mm SUPERDETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.10mm HIGHDETAIL @BIBO2]
|
||||
inherits = *0.10mm*
|
||||
# alias = 0.10mm HIGHDETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.12mm DETAIL @BIBO2]
|
||||
inherits = *0.12mm*
|
||||
# alias = 0.12mm DETAIL
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.15mm OPTIMAL @BIBO2]
|
||||
inherits = *0.15mm*
|
||||
# alias = 0.15mm OPTIMAL
|
||||
top_infill_extrusion_width = 0.45
|
||||
|
||||
[print:0.20mm NORMAL @BIBO2]
|
||||
inherits = *0.20mm*
|
||||
# alias = 0.20mm NORMAL
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.24mm DRAFT @BIBO2]
|
||||
inherits = *0.24mm*
|
||||
# alias = 0.24mm DRAFT
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.28mm SUPERDRAFT @BIBO2]
|
||||
inherits = *0.28mm*
|
||||
# alias = 0.28mm SUPERDRAFT
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.30mm ULTRADRAFT @BIBO2]
|
||||
inherits = *0.30mm*
|
||||
# alias = 0.30mm ULTRADRAFT
|
||||
bottom_solid_layers = 3
|
||||
bridge_speed = 30
|
||||
external_perimeter_speed = 30
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 55
|
||||
max_print_speed = 60
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 30
|
||||
solid_infill_speed = 50
|
||||
top_solid_infill_speed = 40
|
||||
support_material_speed = 45
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
extrusion_width = 0.5
|
||||
first_layer_extrusion_width = 0.42
|
||||
infill_extrusion_width = 0.5
|
||||
perimeter_extrusion_width = 0.5
|
||||
solid_infill_extrusion_width = 0.5
|
||||
top_infill_extrusion_width = 0.45
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
# Soluble Supports Profiles for dual extrusion #
|
||||
[print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
|
||||
inherits = 0.15mm OPTIMAL @BIBO2; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
external_perimeter_speed = 25
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 2
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
|
||||
inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
[print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
|
||||
inherits = 0.20mm NORMAL @BIBO2; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
external_perimeter_speed = 30
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 2
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
|
||||
inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
extrusion_multiplier = 1
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/
|
||||
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
bed_temperature = 60
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_max_volumetric_speed = 15
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
temperature = 200
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = PETG
|
||||
filament_density = 1.27
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature =70
|
||||
first_layer_temperature = 240
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 100
|
||||
temperature = 240
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
bed_temperature = 100
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FFF2EC
|
||||
filament_max_volumetric_speed = 11
|
||||
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_type = ABS
|
||||
filament_density = 1.04
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 245
|
||||
fan_always_on = 0
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
bridge_fan_speed = 25
|
||||
temperature = 245
|
||||
|
||||
[filament:*FLEX*]
|
||||
inherits = *common*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.2
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #008000
|
||||
filament_max_volumetric_speed = 1.5
|
||||
filament_type = FLEX
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 90
|
||||
min_fan_speed = 70
|
||||
#start_filament_gcode = "M900 K0"; Filament gcode"
|
||||
temperature = 240
|
||||
filament_retract_length = 0.8
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
|
||||
[filament:Generic PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
filament_notes = "List of materials which typically use standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
||||
|
||||
[filament:Generic PETG @BIBO2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic ABS @BIBO2]
|
||||
inherits = *ABS*
|
||||
first_layer_bed_temperature = 90
|
||||
bed_temperature = 90
|
||||
filament_vendor = Generic
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Esun ABS @BIBO2]
|
||||
inherits = Generic ABS @BIBO2
|
||||
filament_vendor = Esun
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Hatchbox ABS @BIBO2]
|
||||
inherits = Generic ABS @BIBO2
|
||||
filament_vendor = Hatchbox
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Generic HIPS @BIBO2]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Generic
|
||||
filament_cost = 27.3
|
||||
filament_density = 1.04
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 10
|
||||
filament_colour = #FFFFD7
|
||||
filament_soluble = 1
|
||||
filament_type = HIPS
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 20
|
||||
min_fan_speed = 20
|
||||
temperature = 230
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:AMOLEN bronze PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = AMOLEN
|
||||
temperature = 205
|
||||
bed_temperature = 65
|
||||
filament_colour = #808040
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_temperature = 215
|
||||
filament_cost = 25.99
|
||||
filament_density = 1.24
|
||||
|
||||
[filament:Prusament PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 215
|
||||
bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
first_layer_bed_temperature = 60
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.24
|
||||
|
||||
[filament:Prusament PETG @BIBO2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 245
|
||||
bed_temperature = 70
|
||||
first_layer_temperature = 245
|
||||
first_layer_bed_temperature =70
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
|
||||
[filament:PrimaSelect PVA+ @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = PrimaSelect
|
||||
filament_cost = 108
|
||||
filament_density = 1.23
|
||||
cooling = 0
|
||||
fan_always_on = 0
|
||||
filament_colour = #FFFFD7
|
||||
filament_max_volumetric_speed = 3.8
|
||||
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_soluble = 1
|
||||
filament_type = PVA
|
||||
first_layer_temperature = 195
|
||||
temperature = 195
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:No Filament - standby only @BIBO2]
|
||||
first_layer_temperature = 170
|
||||
temperature = 170
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:Generic FLEX @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Generic
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.2
|
||||
filament_retract_length = 0
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
|
||||
[filament:Overture TPU @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Overture
|
||||
filament_max_volumetric_speed = 1.5
|
||||
first_layer_temperature = 235
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 235
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 23.99
|
||||
filament_density = 1.21
|
||||
|
||||
[filament:SainSmart TPU @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = SainSmart
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
filament_retract_length = 0.5
|
||||
filament_retract_speed = nil
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
[filament:Filatech FilaFlex40 @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Filatech
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 51.45
|
||||
filament_density = 1.22
|
||||
filament_retract_length = 0.5
|
||||
filament_retract_speed = 20
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
bed_shape = -107x-93,107x-93,107x93,-107x93
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0 # By setting this value to 0 deretract used the retract_speed
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_e = 1100
|
||||
machine_max_acceleration_extruding = 5000
|
||||
machine_max_acceleration_retracting = 1100
|
||||
machine_max_acceleration_x = 500
|
||||
machine_max_acceleration_y = 500
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 20
|
||||
machine_max_feedrate_x = 350
|
||||
machine_max_feedrate_y = 350
|
||||
machine_max_feedrate_z = 2
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 0.3
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.30
|
||||
min_layer_height = 0.05
|
||||
max_print_height = 160
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
printer_vendor = BIBO
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 1.5
|
||||
retract_length_toolchange = 1.5
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 20
|
||||
single_extruder_multi_material = 0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
printer_model =
|
||||
default_print_profile =
|
||||
default_filament_profile =
|
||||
|
||||
[printer:BIBO2 Touch Dual extrusion]
|
||||
inherits = *common*
|
||||
printer_model = BIBO2
|
||||
between_objects_gcode =
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
deretract_speed = 0,0 # Setting this value to 0 uses the retract speed
|
||||
extruder_colour = #FFFF00;#229403
|
||||
extruder_offset = 0x0,0x0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.3,0.3
|
||||
min_layer_height = 0.05,0.05
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
printer_settings_id =
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4,0.4
|
||||
remaining_times = 0
|
||||
retract_before_travel = 1,1
|
||||
retract_before_wipe = 100%,100%
|
||||
retract_layer_change = 1,1
|
||||
retract_length = 1.5,1.5
|
||||
retract_length_toolchange = 1.5,1.5
|
||||
retract_lift = 0,0
|
||||
retract_lift_above = 0,0
|
||||
retract_lift_below = 0,0
|
||||
retract_restart_extra = 0,0
|
||||
retract_restart_extra_toolchange = 0,0
|
||||
retract_speed = 20,20
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{max(first_layer_bed_temperature[0] - 5, first_layer_bed_temperature[1] - 5)} ; wait for bed temp\nM140 S{max(first_layer_bed_temperature[0], first_layer_bed_temperature[1])} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[1]} T1; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[1]} T1; wait for 2nd nozzle heat to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2.0 F400 ; move the platform down 2mm\nT[initial_tool]; switch to initial tool position\nG92 E0.0 ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1,1
|
||||
z_offset = 0
|
||||
|
||||
[printer:BIBO2 Touch E1 right only extrusion]
|
||||
inherits = *common*
|
||||
printer_model = BIBO2
|
||||
printer_variant = 0.4
|
||||
extruder_colour = #FFFF00
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 1
|
||||
retract_length = 1.5
|
||||
retract_speed = 20
|
||||
deretract_speed = 0 # Setting this value to 0 uses the retract speed
|
||||
retract_before_wipe = 100%
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0] * 0.791} T1 ; set 2nd nozzle heater to 79.1 percent standby temp\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T1 ; wait for 2nd nozzle heat to 79.1 percent standby temp\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
|
||||
[printer:BIBO2 Touch E2 left only extrusion]
|
||||
inherits = *common*
|
||||
printer_model = BIBO2
|
||||
printer_variant = 0.4
|
||||
extruder_colour = #229403
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
nozzle_diameter = 0.4
|
||||
retract_before_travel = 1
|
||||
retract_length = 1.5
|
||||
retract_speed = 20
|
||||
deretract_speed = 0 # Setting this value to 0 uses the retract speed
|
||||
retract_before_wipe = 100%
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_relative_e_distances = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
# Ditto Printing options with custom beds and special start end gcode for print duplication from one nozzle to the other
|
||||
[printer:BIBO2 E1 right E2 Ditto]
|
||||
inherits = BIBO2 Touch E1 right only extrusion
|
||||
printer_model = BIBO2
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
bed_shape = 0x-93,33x-93,33x93,0x93
|
||||
#bed_model = BIBO2_bed.stl
|
||||
#bed_texture = BIBO2.svg
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T1 ; set 2nd nozzle heater to print temperature\n
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to same first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0]} T1 ; wait for 2nd nozzle heat to same first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
|
||||
[printer:BIBO2 E2 left E1 Ditto]
|
||||
inherits = BIBO2 Touch E2 left only extrusion
|
||||
printer_model = BIBO2
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
bed_shape = -33x-93,0x-93,0x93,-33x93
|
||||
#bed_model = BIBO2_bed.stl
|
||||
#bed_texture = BIBO2.svg
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\n
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
@ -1,108 +0,0 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="606.6" height="527.2" viewBox="0 0 606.6 527.2">
|
||||
<title>BIBO2_new</title>
|
||||
<line y2="527.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="141.7" x2="141.7" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="283.5" x2="283.5" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="425.2" x2="425.2" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="566.9" x2="566.9" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="606.6" y1="514.7" x2="606.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="513.1" x2="606.6" y2="513.1" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line y1="527.2" x2="606.6" y2="527.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="371.3" x2="606.6" y2="371.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="229.6" x2="606.6" y2="229.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="11.6" y1="87.9" x2="606.6" y2="87.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="606.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.41999995708466px"/>
|
||||
<line x1="85" x2="85" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="113.4" x2="113.4" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="170.1" x2="170.1" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="198.4" x2="198.4" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="226.8" x2="226.8" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="255.1" x2="255.1" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="311.8" x2="311.8" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="340.2" x2="340.2" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="368.5" x2="368.5" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="396.9" x2="396.9" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="453.5" x2="453.5" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="481.9" x2="481.9" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="510.2" x2="510.2" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="538.6" x2="538.6" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="595.3" x2="595.3" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="28.3" x2="28.3" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="56.7" x2="56.7" y2="514.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="399.7" x2="606.6" y2="399.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="428" x2="606.6" y2="428" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="456.4" x2="606.6" y2="456.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="484.7" x2="606.6" y2="484.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="343" x2="606.6" y2="343" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="314.7" x2="606.6" y2="314.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="286.3" x2="606.6" y2="286.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="258" x2="606.6" y2="258" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="201.3" x2="606.6" y2="201.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="172.9" x2="606.6" y2="172.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="144.6" x2="606.6" y2="144.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="116.2" x2="606.6" y2="116.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="59.5" x2="606.6" y2="59.5" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="31.2" x2="606.6" y2="31.2" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<line x1="11.6" y1="2.8" x2="606.6" y2="2.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 0.370000004768372px"/>
|
||||
<path d="M26.4,519.7H27l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4H26.4Z" style="fill: #fff"/>
|
||||
<path d="M58.1,524.4H54.3a2.7,2.7,0,0,1,.3-1.2,3.8,3.8,0,0,1,.9-.9l.6-.4.6-.4.4-.5a1.3,1.3,0,0,0,.1-.6v-.3a.4.4,0,0,0-.1-.3l-.3-.2-.5-.2-.4.2a.3.3,0,0,0-.3.3.5.5,0,0,0-.2.4v.6h-1c0-.3.1-.6.1-.9a4.3,4.3,0,0,1,.4-.7l.6-.4a1.7,1.7,0,0,1,1.7,0l.6.4.3.5c0,.2.1.4.1.6a1.4,1.4,0,0,1-.2.6.8.8,0,0,1-.2.5c-.1.2-.3.3-.4.4l-.5.4-.5.3-.4.3-.4.3c-.1.1-.1.3-.2.4h2.7Z" style="fill: #fff"/>
|
||||
<path d="M84.2,521.1h.4l.4-.2.3-.2a.9.9,0,0,0,.1-.5,1.4,1.4,0,0,0-.2-.6,1.2,1.2,0,0,0-1-.1l-.3.3a.5.5,0,0,0-.2.4v.4h-.9a2.2,2.2,0,0,1,.1-.8l.4-.6.6-.4h1.4l.6.2.4.5a1.5,1.5,0,0,1,.1.7,1,1,0,0,1-.2.7,1,1,0,0,1-.6.5h0a1.2,1.2,0,0,1,.8.4,2,2,0,0,1,.1,1.7l-.4.5-.7.4h-.7l-.9-.2-.6-.4a.9.9,0,0,1-.4-.6,1.9,1.9,0,0,1-.1-.8h.9a1.6,1.6,0,0,0,.3.9,1,1,0,0,0,.8.3l.7-.2a1.1,1.1,0,0,0,.3-.8.9.9,0,0,0-.1-.5l-.3-.3h-1Z" style="fill: #fff"/>
|
||||
<path d="M114.7,523H114v1.4h-.9v-1.3h-2.4v-.9l2.4-3.4h.9v3.6h.7Zm-3.3-.7h1.7v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M140,518.8h2.9v.8h-2.2l-.3,1.4h0a.9.9,0,0,1,.5-.3h1.3a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.7,1.7,0,0,1,.1.7,1.5,1.5,0,0,1-.1.7l-.3.7a1.8,1.8,0,0,1-1.5.6h-.8a.9.9,0,0,1-.6-.3,1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.8h.9a.8.8,0,0,0,.3.7,1.1,1.1,0,0,0,.8.3h.4l.4-.3c0-.1.1-.2.1-.4a.6.6,0,0,0,.1-.4.9.9,0,0,0-.1-.5.8.8,0,0,0-.2-.4l-.3-.2h-1l-.4.4h-.9Z" style="fill: #fff"/>
|
||||
<path d="M170.4,520.2a1.4,1.4,0,0,0-.2-.6l-.6-.2h-.4l-.3.2a.8.8,0,0,0-.2.4.6.6,0,0,0-.1.4.6.6,0,0,1-.1.4v.4h0a1.2,1.2,0,0,1,.5-.5h1.4a1.3,1.3,0,0,1,.6.4.9.9,0,0,1,.3.6,1.9,1.9,0,0,1,.2.7,1.9,1.9,0,0,1-.2.8c0,.2-.2.4-.3.6l-.6.4-.8.2a1.9,1.9,0,0,1-1-.3,1.2,1.2,0,0,1-.6-.6,1.6,1.6,0,0,1-.3-.9,4.9,4.9,0,0,1-.1-1.2,3.8,3.8,0,0,1,.1-1l.3-.9a2.3,2.3,0,0,1,.7-.7,1.7,1.7,0,0,1,1-.3l.6.2a.5.5,0,0,1,.5.3l.4.4a1.4,1.4,0,0,1,.2.7Zm-.9,3.5h.5c.1-.1.2-.1.3-.3l.2-.3v-.9c-.1-.1-.1-.3-.2-.4l-.3-.2h-.9l-.3.2c-.1.1-.1.3-.2.4s-.1.3-.1.4.1.3.1.5l.2.4.3.2Z" style="fill: #fff"/>
|
||||
<path d="M196,518.8h3.8v.7l-.8,1-.6,1.1a6.5,6.5,0,0,0-.4,1.3l-.3,1.4h-1l.3-1.3c.1-.4.3-.8.4-1.2a12.7,12.7,0,0,1,.7-1.2,7.6,7.6,0,0,1,.8-1.1H196Z" style="fill: #fff"/>
|
||||
<path d="M226.3,524.5l-.8-.2a.9.9,0,0,1-.6-.3l-.5-.6a1.7,1.7,0,0,1-.1-.7,1.2,1.2,0,0,1,.3-.9c.1-.3.4-.4.7-.5h0l-.6-.5a1.4,1.4,0,0,1-.2-.7,1.6,1.6,0,0,1,.5-1.1,2.4,2.4,0,0,1,2.6,0,1.5,1.5,0,0,1,.4,1.1,1.4,1.4,0,0,1-.2.7,1.5,1.5,0,0,1-.6.5h0a1.4,1.4,0,0,1,.8.5,2,2,0,0,1,.2.9,1.7,1.7,0,0,1-.1.7l-.4.6-.7.3Zm0-.8a.8.8,0,0,0,.8-.2,1.1,1.1,0,0,0,.3-.8.9.9,0,0,0-.3-.7,1.2,1.2,0,0,0-1.6,0,.9.9,0,0,0-.3.7,1.1,1.1,0,0,0,.3.8A.8.8,0,0,0,226.3,523.7Zm0-4.3c-.2,0-.5,0-.6.2a.8.8,0,0,0,0,1.2.9.9,0,0,0,1.2,0,.7.7,0,0,0,0-1.2c-.1-.2-.4-.2-.6-.2Z" style="fill: #fff"/>
|
||||
<path d="M253.8,522.9a.9.9,0,0,0,.3.6.8.8,0,0,0,.6.2l.5-.2a1,1,0,0,0,.4-.5c.1-.2.1-.4.2-.6v-.6h0a1.2,1.2,0,0,1-.5.5l-.7.2-.7-.2-.6-.4a1.6,1.6,0,0,1-.3-.6,1.9,1.9,0,0,1-.2-.7,1.9,1.9,0,0,1,.2-.8,2.1,2.1,0,0,1,.4-.6.9.9,0,0,1,.6-.4l.8-.2a1.9,1.9,0,0,1,1,.3,1.7,1.7,0,0,1,.6.6l.3.9c0,.4.1.8.1,1.2s-.1.7-.1,1a3.6,3.6,0,0,1-.4.9l-.6.7a1.9,1.9,0,0,1-1,.3H254a1,1,0,0,1-.5-.4,1.3,1.3,0,0,1-.5-1.1Zm.9-3.5h-.4l-.3.2c-.1.2-.2.3-.2.4s-.1.3-.1.4.1.3.1.5a.8.8,0,0,0,.2.4l.3.2h.9l.3-.2c.1-.2.1-.3.2-.4v-.9l-.2-.4-.3-.2Z" style="fill: #fff"/>
|
||||
<path d="M278.1,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4H278Z" style="fill: #fff"/>
|
||||
<path d="M284.3,518.6a1.7,1.7,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7,1.7,1.7,0,0,1,.3,1,6.7,6.7,0,0,1,0,2,1.6,1.6,0,0,1-.3.9,1.3,1.3,0,0,1-.6.7,1.7,1.7,0,0,1-1,.3,1.9,1.9,0,0,1-1-.3,1.8,1.8,0,0,1-.5-.7,1.6,1.6,0,0,1-.3-.9,6.7,6.7,0,0,1,0-2,1.7,1.7,0,0,1,.3-1,1.8,1.8,0,0,1,.5-.7A1.9,1.9,0,0,1,284.3,518.6Zm0,5.1c.2,0,.4,0,.5-.2a.8.8,0,0,0,.4-.4c0-.2.1-.5.1-.7a4.9,4.9,0,0,0,0-1.7c0-.2-.1-.4-.1-.7l-.4-.4-.5-.2-.5.2-.3.4a2,2,0,0,0-.1.7,4.9,4.9,0,0,0,0,1.7,1.7,1.7,0,0,0,.1.7l.3.4A.6.6,0,0,0,284.3,523.7Z" style="fill: #fff"/>
|
||||
<path d="M307.2,519.7h.6l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M311.7,519.7h.6l.4-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M334.8,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.3Z" style="fill: #fff"/>
|
||||
<path d="M342.9,524.4h-3.8a1.9,1.9,0,0,1,.4-1.2,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5a1.3,1.3,0,0,0,.1-.6.2.2,0,0,0,0-.3.4.4,0,0,0-.1-.3l-.3-.2-.5-.2-.4.2-.3.3-.2.4v.6h-.9a2.8,2.8,0,0,1,.1-.9,1.6,1.6,0,0,1,.4-.7.9.9,0,0,1,.6-.4,1.7,1.7,0,0,1,1.6,0l.6.4.3.5a1.9,1.9,0,0,1,0,1.2l-.3.5a.8.8,0,0,1-.4.4l-.5.4-.4.3-.5.3-.3.3-.3.4H343Z" style="fill: #fff"/>
|
||||
<path d="M363.1,519.7h.6l.5-.2q.2,0,.3-.3c.2-.1.2-.2.3-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M369,521.1h.4l.4-.2.3-.2a.9.9,0,0,0,.1-.5,1.4,1.4,0,0,0-.2-.6l-.7-.2h-.4l-.3.3c0,.1-.1.2-.1.4s-.1.2,0,.4h-1c.1-.3.1-.5.2-.8a2.1,2.1,0,0,1,.4-.6.9.9,0,0,1,.6-.4h1.4l.5.2.4.5a1.4,1.4,0,0,1,.2.7,1.9,1.9,0,0,1-.2.7,1.5,1.5,0,0,1-.6.5h0a.8.8,0,0,1,.7.4,1.7,1.7,0,0,1,.1,1.7,1,1,0,0,1-.4.5l-.6.4h-.8l-.8-.2a.7.7,0,0,1-.6-.4.9.9,0,0,1-.4-.6c-.1-.2-.1-.5-.2-.8h1a1,1,0,0,0,.2.9,1.1,1.1,0,0,0,.8.3l.8-.2a1.3,1.3,0,0,0,.2-1.3l-.4-.3h-1Z" style="fill: #fff"/>
|
||||
<path d="M391.3,519.7h.6l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M399.5,523h-.7v1.4h-.9v-1.3h-2.4v-.9l2.4-3.4h.9v3.6h.7Zm-3.2-.7h1.6v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M419.8,519.7h.6l.5-.2q.2,0,.3-.3c.2-.1.2-.2.2-.4h.8v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M424.8,518.8h2.9v.8h-2.2l-.3,1.4h0a.9.9,0,0,1,.5-.3H427a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.7,1.7,0,0,1,.1.7,1.5,1.5,0,0,1-.1.7l-.3.7-.7.5a1.1,1.1,0,0,1-.8.1h-.8a.9.9,0,0,1-.6-.3,1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.8h.9a1.1,1.1,0,0,0,1,1h.5l.3-.3a.5.5,0,0,0,.2-.4c0-.1.1-.3.1-.4s-.1-.3-.1-.5a.8.8,0,0,0-.2-.4l-.3-.2h-1.1c-.1.1-.3.2-.3.4h-.9Z" style="fill: #fff"/>
|
||||
<path d="M448.2,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.3Z" style="fill: #fff"/>
|
||||
<path d="M455.4,520.2c-.1-.2-.1-.4-.3-.6l-.6-.2a.9.9,0,0,0-.7.3.8.8,0,0,0-.2.4.6.6,0,0,0-.1.4.6.6,0,0,0-.1.4v.4h0a1.2,1.2,0,0,1,.5-.5h1.5a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.7,1.7,0,0,1,.1.7c0,.3-.1.6-.1.8l-.4.6-.6.4-.8.2a1.9,1.9,0,0,1-1-.3,1.2,1.2,0,0,1-.6-.6,1.6,1.6,0,0,1-.3-.9,4.9,4.9,0,0,1-.1-1.2,3.8,3.8,0,0,1,.1-1,3.6,3.6,0,0,1,.4-.9,1.3,1.3,0,0,1,.6-.7,1.9,1.9,0,0,1,1-.3,2.1,2.1,0,0,1,1.2.5c.1.1.3.3.3.4a1.4,1.4,0,0,1,.2.7Zm-1,3.5h.5c.1-.1.2-.1.3-.3l.2-.3v-.9l-.2-.4-.3-.2H454c-.3.1-.4.3-.5.6a.6.6,0,0,0-.1.4.9.9,0,0,0,.1.5c0,.1.1.2.2.4l.3.2Z" style="fill: #fff"/>
|
||||
<path d="M476.5,519.7h.6l.5-.2q.1,0,.3-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M480.8,518.8h3.9v.7l-.8,1-.7,1.1a9.3,9.3,0,0,0-.4,1.3,6.8,6.8,0,0,0-.2,1.4h-1a5.9,5.9,0,0,1,.2-1.3,6.1,6.1,0,0,1,.5-1.2,4.5,4.5,0,0,1,.6-1.2l.8-1.1h-2.9Z" style="fill: #fff"/>
|
||||
<path d="M504.9,519.7h.5l.5-.2a.5.5,0,0,0,.4-.3.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M511.1,524.5l-.8-.2a.9.9,0,0,1-.6-.3,1.3,1.3,0,0,1-.4-.6,1.4,1.4,0,0,1-.2-.7,1.6,1.6,0,0,1,.3-.9l.7-.5h0a1,1,0,0,1-.5-.4,1,1,0,0,1-.2-.7,1.1,1.1,0,0,1,.4-1.1,1.9,1.9,0,0,1,2.6,0,1.1,1.1,0,0,1,.4,1.1.7.7,0,0,1-.2.7,1,1,0,0,1-.5.4h0a1.8,1.8,0,0,1,.7.5,1.6,1.6,0,0,1,.3.9,1.4,1.4,0,0,1-.2.7,1.3,1.3,0,0,1-.4.6.9.9,0,0,1-.6.3Zm0-.8a.8.8,0,0,0,.8-.2,1.1,1.1,0,0,0,.3-.8.9.9,0,0,0-.3-.7,1.1,1.1,0,0,0-.8-.3,1.3,1.3,0,0,0-.8.3.9.9,0,0,0-.3.7,1.1,1.1,0,0,0,.3.8A.8.8,0,0,0,511.1,523.7Zm0-4.3c-.2-.1-.4,0-.6.2a.9.9,0,0,0,0,1.2,1,1,0,0,0,1.3,0,.9.9,0,0,0,0-1.2,1,1,0,0,0-.7-.2Z" style="fill: #fff"/>
|
||||
<path d="M533.3,519.7h.6l.5-.2a.5.5,0,0,0,.4-.3c.1-.1.1-.2.2-.4h.7v5.6h-1v-4h-1.4Z" style="fill: #fff"/>
|
||||
<path d="M538.6,522.9c.1.2.1.4.3.6l.6.2.6-.2.3-.5c.1-.2.1-.4.2-.6v-.6h0a1.2,1.2,0,0,1-.5.5l-.7.2-.7-.2-.6-.4a1.6,1.6,0,0,1-.3-.6,1.7,1.7,0,0,1-.1-.7,1.9,1.9,0,0,1,.1-.8,2.1,2.1,0,0,1,.4-.6.9.9,0,0,1,.6-.4l.8-.2a1.9,1.9,0,0,1,1,.3l.6.6.3.9a4.9,4.9,0,0,1,.1,1.2c0,.3-.1.7-.1,1a3.6,3.6,0,0,1-.4.9c-.1.3-.4.5-.6.7a1.9,1.9,0,0,1-1,.3h-.7l-.5-.4-.4-.4a1.5,1.5,0,0,1-.1-.7Zm.9-3.5h-.4l-.3.2c-.1.2-.2.3-.2.4s-.1.3-.1.4.1.3.1.5a.8.8,0,0,0,.2.4l.3.2h.9l.3-.2c.1-.1.1-.3.2-.4v-.9l-.2-.4-.3-.2Z" style="fill: #fff"/>
|
||||
<path d="M565.7,524.4h-3.9a2.8,2.8,0,0,1,.4-1.2,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5a.8.8,0,0,0,.2-.6v-.3l-.2-.3-.3-.2-.4-.2-.5.2q-.1,0-.3.3c-.1.1-.1.2-.1.4a1.3,1.3,0,0,0-.1.6H562a2.8,2.8,0,0,1,.1-.9,1.6,1.6,0,0,1,.4-.7.9.9,0,0,1,.6-.4,1.7,1.7,0,0,1,1.7,0,1,1,0,0,1,.5.4.5.5,0,0,1,.3.5,1.9,1.9,0,0,1,0,1.2l-.3.5a.8.8,0,0,1-.4.4l-.4.4-.5.3-.5.3-.3.3a.8.8,0,0,0-.2.4h2.7Z" style="fill: #fff"/>
|
||||
<path d="M568.2,518.6a1.7,1.7,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7l.3,1a6.7,6.7,0,0,1,0,2l-.3.9a1.3,1.3,0,0,1-.6.7,1.8,1.8,0,0,1-2,0,1.3,1.3,0,0,1-.6-.7l-.3-.9a6.7,6.7,0,0,1,0-2l.3-1a1.3,1.3,0,0,1,.6-.7A1.7,1.7,0,0,1,568.2,518.6Zm0,5.1c.2,0,.4,0,.5-.2s.3-.2.3-.4a1.9,1.9,0,0,0,.2-.7v-1.7a2.5,2.5,0,0,0-.2-.7c0-.1-.2-.3-.3-.4l-.5-.2-.5.2-.3.4a6.4,6.4,0,0,1-.2.7v1.7c.1.2.1.5.2.7l.3.4C567.8,523.7,568,523.7,568.2,523.7Z" style="fill: #fff"/>
|
||||
<path d="M594.8,524.4H591a2.7,2.7,0,0,1,.3-1.2,3.8,3.8,0,0,1,.9-.9l.6-.4.5-.4c.2-.1.3-.3.5-.5a1.3,1.3,0,0,0,.1-.6v-.3c0-.1-.1-.2-.1-.3l-.3-.2-.5-.2-.4.2a.3.3,0,0,0-.3.3.5.5,0,0,0-.2.4v.6h-1a2.9,2.9,0,0,1,.2-.9,1.5,1.5,0,0,1,.3-.7l.6-.4a1.5,1.5,0,0,1,.9-.2,1.1,1.1,0,0,1,.8.2l.6.4.3.5c0,.2.1.4.1.6s-.1.4-.1.6l-.3.5c-.1.2-.3.3-.4.4l-.5.4-.5.3-.4.3-.4.3c-.1.1-.1.3-.2.4h2.8Z" style="fill: #fff"/>
|
||||
<path d="M595.6,519.7h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.7v5.6h-1v-4h-1.3Z" style="fill: #fff"/>
|
||||
<path d="M1.7,482.8h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-3.9H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6.2,459.1H2.4a1.9,1.9,0,0,1,.4-1.2,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5c.1-.1.1-.3.2-.5v-.4l-.2-.3-.3-.2H4q-.2,0-.3.3c-.1.1-.1.3-.2.4v.6h-1a2.8,2.8,0,0,1,.1-.9A2.5,2.5,0,0,1,3,454l.6-.4.8-.2.9.2a1,1,0,0,1,.5.4.7.7,0,0,1,.3.6.7.7,0,0,1,.1.5,1.3,1.3,0,0,1-.1.6.8.8,0,0,1-.2.5l-.4.5L5,457l-.5.3-.4.3a.8.8,0,0,0-.4.4c-.1.1-.2.2-.2.3H6.2Z" style="fill: #fff"/>
|
||||
<path d="M3.9,427.5h.8q.3-.1.3-.3a.8.8,0,0,0-.1-1,.7.7,0,0,0-.6-.2H3.8l-.2.2a.8.8,0,0,0-.2.4v.4h-1a1.9,1.9,0,0,1,.2-.7.9.9,0,0,1,.4-.6.7.7,0,0,1,.5-.4l.8-.2h.6l.6.3a1,1,0,0,1,.4.5,1.4,1.4,0,0,1,.2.6,1.4,1.4,0,0,1-.2.7,1.3,1.3,0,0,1-.6.5h0a1.2,1.2,0,0,1,.7.5,1.4,1.4,0,0,1,.3.9,1.4,1.4,0,0,1-.2.7,2.1,2.1,0,0,1-.4.6l-.6.3H3.4l-.6-.4c-.1-.2-.3-.4-.3-.6a3.1,3.1,0,0,1-.2-.8h.9a1.1,1.1,0,0,0,.3.8,1.2,1.2,0,0,0,.8.4,1.3,1.3,0,0,0,.8-.3,1.1,1.1,0,0,0,.3-.7,1.4,1.4,0,0,0-.2-.6c0-.1-.2-.2-.3-.3h-1Z" style="fill: #fff"/>
|
||||
<path d="M6.3,401.1H5.5v1.3H4.7v-1.3H2.3v-.9l2.4-3.4h.8v3.6h.7ZM3,400.4H4.7v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M3.1,368.5H6v.8H3.7l-.3,1.4h0l.5-.3H5.2l.6.4.3.6a2.2,2.2,0,0,1,.1.8,2,2,0,0,1-.1.7l-.3.6-.6.5-.9.2H3.5l-.6-.4a1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.7h.9a1.1,1.1,0,0,0,.3.7l.8.2h.4a.5.5,0,0,0,.4-.2.8.8,0,0,0,.1-.4.4.4,0,0,0,0-.5c.1-.2,0-.3,0-.5l-.2-.3-.3-.3H3.6c-.1.1-.3.2-.3.4H2.4Z" style="fill: #fff"/>
|
||||
<path d="M5,341.5a.5.5,0,0,0-.3-.5c-.1-.2-.3-.2-.6-.2H3.7l-.3.2c-.1.1-.1.2-.2.4s-.1.2-.1.4-.1.3-.1.4v.4H3l.5-.5.7-.2.8.2a1,1,0,0,1,.5.4l.4.6a1.7,1.7,0,0,1,.1.7,2.2,2.2,0,0,1-.1.8,2.1,2.1,0,0,1-.4.6l-.6.4H4.1a1.2,1.2,0,0,1-1-.2l-.6-.6a1.6,1.6,0,0,1-.3-.9,4.9,4.9,0,0,1-.1-1.2,3.4,3.4,0,0,1,.1-1,3.6,3.6,0,0,1,.4-.9c.1-.3.4-.5.6-.7a1.9,1.9,0,0,1,1-.3h.7l.5.4.3.4a.8.8,0,0,1,.2.7Zm-.9,3.6h.4l.3-.3c.1-.1.2-.2.2-.3a.9.9,0,0,0,.1-.5.6.6,0,0,0-.1-.4.8.8,0,0,0-.2-.4l-.3-.2H3.6l-.3.2c-.1.1-.1.2-.2.4v.4a1.9,1.9,0,0,0,.2.8l.3.3Z" style="fill: #fff"/>
|
||||
<path d="M2.4,311.8H6.2v.7l-.8,1a3.4,3.4,0,0,0-.6,1.2,6.1,6.1,0,0,0-.5,1.2,7.7,7.7,0,0,0-.2,1.5h-1a5.9,5.9,0,0,1,.2-1.3,6.9,6.9,0,0,1,.5-1.3l.6-1.2.8-1H2.4Z" style="fill: #fff"/>
|
||||
<path d="M4.3,289.2l-.8-.2c-.2,0-.4-.2-.6-.3l-.4-.6a1.9,1.9,0,0,1-.2-.7,1.6,1.6,0,0,1,.3-.9l.7-.5h0a1,1,0,0,1-.5-.4,1,1,0,0,1-.2-.7,1.3,1.3,0,0,1,.4-1.2,2.8,2.8,0,0,1,1.3-.4,2.8,2.8,0,0,1,1.3.4,1.3,1.3,0,0,1,.4,1.2.7.7,0,0,1-.2.7.9.9,0,0,1-.6.4h0l.8.5a1.6,1.6,0,0,1,.3.9,1.9,1.9,0,0,1-.2.7,2.1,2.1,0,0,1-.4.6c-.2.1-.4.3-.6.3Zm0-.8.8-.2a1.1,1.1,0,0,0,.3-.8.8.8,0,0,0-.3-.7,1.3,1.3,0,0,0-.8-.3,1.3,1.3,0,0,0-.8.3.9.9,0,0,0-.3.7,1.1,1.1,0,0,0,.3.8l.8.2Zm0-4.4a.9.9,0,0,0-.6.3.7.7,0,0,0,0,1.2c.1.2.4.2.6.2s.5,0,.6-.2a.7.7,0,0,0,0-1.2.7.7,0,0,0-.6-.3Z" style="fill: #fff"/>
|
||||
<path d="M3.4,259.3a.8.8,0,0,0,.2.5c.2.2.4.3.6.2a.7.7,0,0,0,.6-.1l.3-.5a6.4,6.4,0,0,0,.2-.7v-.6h0l-.5.5-.7.2H3.4l-.5-.4a2.1,2.1,0,0,1-.4-.6,3.2,3.2,0,0,1,0-1.6,2.1,2.1,0,0,1,.4-.6l.6-.4h.8a1.8,1.8,0,0,1,1,.2c.2.2.5.4.6.6a1.7,1.7,0,0,1,.3,1,4.1,4.1,0,0,1,.1,1.1,3.1,3.1,0,0,1-.1,1,3,3,0,0,1-.4,1,1.7,1.7,0,0,1-.6.6,1.9,1.9,0,0,1-1,.3H3.6l-.6-.3a2.4,2.4,0,0,1-.6-1.1Zm.8-3.6H3.8l-.3.3c-.1.1-.1.2-.2.4v.8c.1.2.1.3.2.4l.3.3h.9l.3-.3a.5.5,0,0,0,.2-.4c0-.1.1-.3,0-.4s0-.3,0-.4-.1-.3-.2-.4l-.3-.3Z" style="fill: #fff"/>
|
||||
<path d="M1.7,227.7h.5l.5-.2.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M7.9,226.6a1.7,1.7,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7,1.7,1.7,0,0,1,.3,1,3.1,3.1,0,0,1,.1,1,3.8,3.8,0,0,1-.1,1,1.6,1.6,0,0,1-.3.9,1.3,1.3,0,0,1-.6.7,1.7,1.7,0,0,1-1,.3,1.9,1.9,0,0,1-1-.3,1.8,1.8,0,0,1-.5-.7,1.6,1.6,0,0,1-.3-.9,3.8,3.8,0,0,1-.1-1,3.1,3.1,0,0,1,.1-1,1.7,1.7,0,0,1,.3-1,1.8,1.8,0,0,1,.5-.7A1.9,1.9,0,0,1,7.9,226.6Zm0,5.1.5-.2.4-.4c0-.3.1-.5.1-.7v-1.7c0-.2-.1-.4-.1-.7l-.4-.4a.7.7,0,0,0-1,0l-.3.4a2,2,0,0,0-.1.7,1.1,1.1,0,0,0,0,.8,1.4,1.4,0,0,0,0,.9,2,2,0,0,0,.1.7l.3.4.5.2Z" style="fill: #fff"/>
|
||||
<path d="M1.7,199.3h.5l.5-.2.4-.3a.5.5,0,0,0,.2-.4h.8V204h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6.1,199.3h.6l.5-.2c.1-.1.3-.1.4-.3l.2-.4h.7V204h-1v-4H6.1Z" style="fill: #fff"/>
|
||||
<path d="M1.7,171h1l.4-.3a.8.8,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M9.9,175.7H6a2,2,0,0,1,.4-1.3,2,2,0,0,1,.9-.9l.5-.4.6-.4.4-.5a.4.4,0,0,0,.1-.5c.1-.2.1-.3,0-.4a.4.4,0,0,0-.1-.3l-.3-.2H7.6l-.3.3-.2.4v.6h-1a2.9,2.9,0,0,1,.2-.9,1.5,1.5,0,0,1,.3-.7l.6-.4a1.7,1.7,0,0,1,1.7,0l.6.4.3.5c0,.2.1.4.1.6s-.1.4-.1.6l-.3.5-.4.5-.5.3-.5.3-.4.3-.4.4-.2.3H9.9Z" style="fill: #fff"/>
|
||||
<path d="M1.7,142.6h1l.4-.3.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M7.5,144h.9l.3-.3a.6.6,0,0,0,.1-.4.7.7,0,0,0-.3-.6l-.6-.2H7.5l-.3.2-.2.4v.4H6.1a1.7,1.7,0,0,1,.1-.7c.1-.2.2-.5.4-.6l.6-.4.7-.2h.7l.5.3a1,1,0,0,1,.4.5.7.7,0,0,1,.2.6,2.4,2.4,0,0,1-.2.8c-.1.2-.4.3-.6.4h0a1.3,1.3,0,0,1,.7.5,1.6,1.6,0,0,1,.2,1.6c-.1.3-.3.4-.5.6l-.6.3H7.1c-.2-.1-.5-.2-.6-.4l-.4-.6a2.2,2.2,0,0,1-.1-.8h.9a1.1,1.1,0,0,0,.2.8.9.9,0,0,0,.8.4,1.1,1.1,0,0,0,.8-.3.9.9,0,0,0,.3-.7.7.7,0,0,0-.1-.5c-.1-.2-.2-.3-.4-.3l-.4-.2H7.5Z" style="fill: #fff"/>
|
||||
<path d="M1.7,114.3h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8V119h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M9.9,117.6H9.2V119H8.3v-1.4H5.9v-.9l2.4-3.3h.9V117h.7Zm-3.3-.7H8.3v-2.5h0Z" style="fill: #fff"/>
|
||||
<path d="M1.7,85.9h1l.4-.3a.8.8,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6.7,85H9.6v.8H7.4l-.3,1.5h0l.5-.4h.6l.7.2a1,1,0,0,1,.5.4,2.1,2.1,0,0,1,.4.6,1.9,1.9,0,0,1,.1.8c0,.2-.1.4-.1.6a1.6,1.6,0,0,1-.4.7,1,1,0,0,1-.6.5l-.9.2H7.2l-.6-.4a1,1,0,0,1-.4-.5,1.9,1.9,0,0,1-.2-.7h.9a.9.9,0,0,0,.9.9h.6l.3-.3a.5.5,0,0,0,.2-.4v-.9l-.2-.4-.3-.2H7.3c-.1.1-.3.2-.3.4H6.1Z" style="fill: #fff"/>
|
||||
<path d="M1.7,57.6h.5l.5-.2c.2,0,.3-.1.4-.3a.5.5,0,0,0,.2-.4h.8v5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M8.9,58.1a.9.9,0,0,0-.3-.6l-.5-.2H7.6c-.1.1-.2.1-.3.3l-.2.3c0,.1-.1.3-.1.4s-.1.3-.1.4v.4h0c.2-.2.3-.4.6-.5H8.9l.6.4.3.6a1.7,1.7,0,0,1,.1.7,1.9,1.9,0,0,1-.1.8,2.1,2.1,0,0,1-.4.6l-.6.4-.8.2-1-.3a1.7,1.7,0,0,1-.6-.6l-.3-.9A4.9,4.9,0,0,1,6,59.4c0-.3.1-.6.1-1l.3-.9a2.3,2.3,0,0,1,.7-.7,1.2,1.2,0,0,1,1-.2h.6a.5.5,0,0,1,.5.3,1,1,0,0,1,.4.5,1.1,1.1,0,0,1,.2.6ZM8,61.6h.4c.1,0,.3-.1.3-.2a.8.8,0,0,0,.2-.4.6.6,0,0,0,.1-.4.9.9,0,0,0-.1-.5c0-.1-.1-.2-.2-.3a.7.7,0,0,0-.7-.4H7.6c-.2.1-.3.1-.3.2s-.2.3-.2.4a.9.9,0,0,0-.1.5.6.6,0,0,0,.1.4.8.8,0,0,0,.2.4c0,.1.1.2.3.2Z" style="fill: #fff"/>
|
||||
<path d="M1.7,29.2a.4.4,0,0,0,.5,0h.5l.4-.3a.8.8,0,0,0,.2-.4h.8V34h-1V30H1.7Z" style="fill: #fff"/>
|
||||
<path d="M6,28.3H9.8v.8l-.8,1-.6,1.1L8,32.5a6.8,6.8,0,0,0-.2,1.4h-1A5.9,5.9,0,0,1,7,32.6c.1-.4.3-.8.4-1.2a7.5,7.5,0,0,1,.7-1.2l.8-1H6Z" style="fill: #fff"/>
|
||||
<path d="M1.7.9h.5L2.7.7c.2,0,.3-.2.4-.3A.8.8,0,0,0,3.3,0h.8V5.6h-1v-4H1.7Z" style="fill: #fff"/>
|
||||
<path d="M7.9,5.7H7.2l-.7-.4-.4-.5A2.2,2.2,0,0,1,6,3.9,2.9,2.9,0,0,1,6.2,3,1.2,1.2,0,0,1,7,2.6H7l-.6-.5a1.9,1.9,0,0,1-.2-.7A1.6,1.6,0,0,1,6.7.3,1.5,1.5,0,0,1,8-.1,1.7,1.7,0,0,1,9.3.3a1.5,1.5,0,0,1,.4,1.1,1.4,1.4,0,0,1-.2.7l-.6.5h0a1.2,1.2,0,0,1,.8.4,2.9,2.9,0,0,1,.2.9,2.2,2.2,0,0,1-.1.8l-.4.5-.7.4Zm0-.7a1.1,1.1,0,0,0,.8-.3A1.1,1.1,0,0,0,9,3.9a.9.9,0,0,0-.3-.7,1.1,1.1,0,0,0-.8-.3,1,1,0,0,0-1,1,1.1,1.1,0,0,0,.3.8A1.1,1.1,0,0,0,7.9,5ZM7.9.6,7.3.8c-.2.2-.3.4-.2.6a.6.6,0,0,0,.2.7,1.5,1.5,0,0,0,1.3,0,1,1,0,0,0,.2-.7A1.1,1.1,0,0,0,8.6.8.8.8,0,0,0,7.9.6Z" style="fill: #fff"/>
|
||||
<path d="M5.1,510a1.5,1.5,0,0,1,1,.3,1.3,1.3,0,0,1,.6.7,1.6,1.6,0,0,1,.3.9,3.8,3.8,0,0,1,.1,1,3.1,3.1,0,0,1-.1,1,1.7,1.7,0,0,1-.3,1,1.9,1.9,0,0,1-.6.7,1.1,1.1,0,0,1-1,.2,1.2,1.2,0,0,1-1-.2l-.5-.7a1.7,1.7,0,0,1-.3-1,3.1,3.1,0,0,1-.1-1,3.8,3.8,0,0,1,.1-1,1.6,1.6,0,0,1,.3-.9,1.8,1.8,0,0,1,.5-.7A1.9,1.9,0,0,1,5.1,510Zm0,5.1.5-.2a1,1,0,0,0,.4-.5c0-.2.1-.4.1-.6v-1.7c0-.2-.1-.5-.1-.7l-.4-.5h-1l-.3.5c0,.2-.1.5-.1.7v1.7c0,.2.1.4.1.6l.3.5Z" style="fill: #fff"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 24 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB |
@ -1,696 +0,0 @@
|
||||
# Print profiles for a basic FDM printer
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = Custom
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.1.4
|
||||
# Where to get the updates from?
|
||||
config_update_url =
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
#TODO: One day we may differentiate variants of the nozzles / hot ends,
|
||||
#for example by the melt zone size, or whether the nozzle is hardened.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
[printer_model:Custom_1.75mm]
|
||||
name = Custom 1.75mm
|
||||
variants = 0.4; 0.15; 0.2; 0.25; 0.3; 0.35; 0.5; 0.6; 0.8; 1.0; 1.2;
|
||||
thumbnail = Basic_thumbnail.png
|
||||
|
||||
[printer_model:Bowden_1.75mm]
|
||||
name = Bowden 1.75mm
|
||||
variants = 0.4; 0.15; 0.2; 0.25; 0.3; 0.35; 0.5; 0.6; 0.8; 1.0; 1.2;
|
||||
thumbnail = Basic_thumbnail.png
|
||||
|
||||
#[printer_model:Custom_2.5mm]
|
||||
#name = Custom 2.5mm
|
||||
#variants = 0.4; 0.15; 0.2; 0.25; 0.3; 0.35; 0.5; 0.6; 0.8; 1.0; 1.2;
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
[printer:*common*]
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X195 Y1\nG1 X190 E4\nG1 F4000\nG1 X180 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
pressure_advance = 0
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 0.5
|
||||
retract_lift = 0.6
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 9999
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 35
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; ENDER3 firmware may only supports the old M204 format\nG28 W ; home all\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X0.0 Y0.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X150.0 E20 F1000.0 ; intro line\nG92 E0.0
|
||||
toolchange_gcode = M600
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
bed_shape = 0x0,200x0,200x200,0x200
|
||||
max_print_height = 200
|
||||
default_filament_profile = Basic PLA
|
||||
silent_mode = 0
|
||||
|
||||
|
||||
[printer:*0.15nozzle*]
|
||||
nozzle_diameter = 0.15
|
||||
max_layer_height = 0.12
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.15
|
||||
default_print_profile = 0.08mm NORMAL .15N
|
||||
|
||||
[printer:*0.2nozzle*]
|
||||
nozzle_diameter = 0.2
|
||||
max_layer_height = 0.16
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.2
|
||||
default_print_profile = 0.1m NORMAL .2N
|
||||
|
||||
[printer:*0.25nozzle*]
|
||||
nozzle_diameter = 0.25
|
||||
max_layer_height = 0.2
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
default_print_profile = 0.1m NORMAL .25N
|
||||
|
||||
[printer:*0.3nozzle*]
|
||||
nozzle_diameter = 0.3
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.3
|
||||
default_print_profile = 0.15m NORMAL .3N
|
||||
|
||||
[printer:*0.35nozzle*]
|
||||
nozzle_diameter = 0.35
|
||||
max_layer_height = 0.25
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.35
|
||||
default_print_profile = 0.15m NORMAL .35N
|
||||
|
||||
[printer:*0.4nozzle*]
|
||||
nozzle_diameter = 0.4
|
||||
max_layer_height = 0.3
|
||||
min_layer_height = 0.075
|
||||
printer_variant = 0.4
|
||||
default_print_profile = 0.20mm NORMAL .4N
|
||||
|
||||
[printer:*0.5nozzle*]
|
||||
nozzle_diameter = 0.5
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.075
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.20mm NORMAL .5N
|
||||
|
||||
[printer:*0.6nozzle*]
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.5
|
||||
min_layer_height = 0.1
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm NORMAL .6N
|
||||
|
||||
[printer:*0.8nozzle*]
|
||||
nozzle_diameter = 0.8
|
||||
max_layer_height = 0.6
|
||||
min_layer_height = 0.1
|
||||
printer_variant = 0.8
|
||||
default_print_profile = 0.30mm NORMAL .7N
|
||||
|
||||
[printer:*1.0nozzle*]
|
||||
nozzle_diameter = 1.0
|
||||
max_layer_height = 0.8
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 1.0
|
||||
default_print_profile = 0.50mm NORMAL 1N
|
||||
|
||||
[printer:*1.2nozzle*]
|
||||
nozzle_diameter = 1.2
|
||||
max_layer_height = 1.0
|
||||
min_layer_height = 0.2
|
||||
printer_variant = 1.2
|
||||
default_print_profile = 0.50mm NORMAL 1.2N
|
||||
|
||||
[printer:Basic 0.15 nozzle]
|
||||
inherits = *common*; *0.15nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.2 nozzle]
|
||||
inherits = *common*; *0.2nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.25 nozzle]
|
||||
inherits = *common*; *0.25nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.3 nozzle]
|
||||
inherits = *common*; *0.3nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.4 nozzle]
|
||||
inherits = *common*; *0.4nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.5 nozzle]
|
||||
inherits = *common*; *0.5nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.6 nozzle]
|
||||
inherits = *common*; *0.6nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 0.8 nozzle]
|
||||
inherits = *common*; *0.8nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 1.0 nozzle]
|
||||
inherits = *common*; *1.0nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:Basic 1.2 nozzle]
|
||||
inherits = *common*; *1.2nozzle*
|
||||
printer_model = Custom_1.75mm
|
||||
|
||||
[printer:*bowden*]
|
||||
inherits = *common*
|
||||
retract_length = 8
|
||||
retract_speed = 60
|
||||
deretract_speed = 40
|
||||
printer_model = Bowden_1.75mm
|
||||
|
||||
|
||||
[printer:Bowden 0.15 nozzle]
|
||||
inherits = *bowden*; *0.15nozzle*
|
||||
|
||||
[printer:Bowden 0.2 nozzle]
|
||||
inherits = *bowden*; *0.2nozzle*
|
||||
|
||||
[printer:Bowden 0.25 nozzle]
|
||||
inherits = *bowden*; *0.25nozzle*
|
||||
|
||||
[printer:Bowden 0.3 nozzle]
|
||||
inherits = *bowden*; *0.3nozzle*
|
||||
|
||||
[printer:Bowden 0.4 nozzle]
|
||||
inherits = *bowden*; *0.4nozzle*
|
||||
|
||||
[printer:Bowden 0.5 nozzle]
|
||||
inherits = *bowden*; *0.5nozzle*
|
||||
|
||||
[printer:Bowden 0.6 nozzle]
|
||||
inherits = *bowden*; *0.6nozzle*
|
||||
|
||||
[printer:Bowden 0.8 nozzle]
|
||||
inherits = *bowden*; *0.8nozzle*
|
||||
|
||||
[printer:Bowden 1.0 nozzle]
|
||||
inherits = *bowden*; *1.0nozzle*
|
||||
|
||||
[printer:Bowden 1.2 nozzle]
|
||||
inherits = *bowden*; *1.2nozzle*
|
||||
|
||||
# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
|
||||
# All other print presets will derive from the *common* print preset.
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_acceleration = 1000
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 80%
|
||||
over_bridge_flow_ratio = 105%
|
||||
fill_top_flow_ratio = 100%
|
||||
bottom_fill_pattern = concentricgapfill
|
||||
bridge_speed = 20
|
||||
brim_inside_holes = 0
|
||||
brim_width = 0
|
||||
brim_width_interior = 0
|
||||
brim_ears = 1
|
||||
brim_ears_max_angle = 120
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
curve_smoothing_precision = 0
|
||||
curve_smoothing_angle_convex = 170
|
||||
curve_smoothing_angle_concave = 170
|
||||
curve_smoothing_cutoff_dist = 2
|
||||
default_acceleration = 1000
|
||||
dont_support_bridges = 1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 0
|
||||
extra_perimeters_odd_layers = 0
|
||||
only_one_perimeter_top = 1
|
||||
first_layer_size_compensation = -0.05
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
fill_angle = 45
|
||||
fill_density = 13%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_height = 75%
|
||||
first_layer_speed = 30
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 1
|
||||
hole_size_compensation = -0.03
|
||||
infill_acceleration = 1000
|
||||
infill_dense = 1
|
||||
infill_dense_algo = autosmall
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_first = 0
|
||||
infill_connection = connected
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 20%
|
||||
interface_shells = 0
|
||||
label_printed_objects = 1
|
||||
max_print_speed = 100
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
perimeters = 2
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = hidden
|
||||
skirts = 0
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 25
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_extruder = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance_type = filament
|
||||
support_material_contact_distance_top = 0.15
|
||||
support_material_contact_distance_bottom = 0.15
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_solid_first_layer = 1
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
thin_walls_min_width = 50%
|
||||
thin_walls_overlap = 50%
|
||||
top_fill_pattern = smooth
|
||||
top_solid_infill_speed = 40
|
||||
travel_speed = 180
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
extrusion_width = 105%
|
||||
external_perimeter_extrusion_width = 105%
|
||||
first_layer_extrusion_width = 140%
|
||||
infill_extrusion_width = 110%
|
||||
perimeter_extrusion_width = 110%
|
||||
solid_infill_extrusion_width = 110%
|
||||
top_infill_extrusion_width = 110%
|
||||
support_material_extrusion_width = 110%
|
||||
|
||||
[print:*0.15nozzle*]
|
||||
perimeters = 6
|
||||
infill_overlap = 40%
|
||||
first_layer_height = 0.1
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.15
|
||||
|
||||
[print:*0.2nozzle*]
|
||||
perimeters = 5
|
||||
infill_overlap = 35%
|
||||
first_layer_height = 0.14
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.2
|
||||
|
||||
[print:*0.25nozzle*]
|
||||
perimeters = 4
|
||||
infill_overlap = 30%
|
||||
first_layer_height = 0.17
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.25
|
||||
|
||||
[print:*0.3nozzle*]
|
||||
perimeters = 4
|
||||
infill_overlap = 25%
|
||||
first_layer_height = 0.2
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.3
|
||||
|
||||
[print:*0.35nozzle*]
|
||||
perimeters = 3
|
||||
infill_overlap = 25%
|
||||
first_layer_height = 0.2
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.35
|
||||
|
||||
[print:*0.4nozzle*]
|
||||
perimeters = 3
|
||||
infill_overlap = 25%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.4
|
||||
|
||||
[print:*0.5nozzle*]
|
||||
perimeters = 3
|
||||
infill_overlap = 20%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.5
|
||||
|
||||
[print:*0.6nozzle*]
|
||||
perimeters = 2
|
||||
infill_overlap = 15%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6
|
||||
|
||||
[print:*0.8nozzle*]
|
||||
perimeters = 2
|
||||
infill_overlap = 15%
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.8
|
||||
|
||||
[print:*1.0nozzle*]
|
||||
perimeters = 1
|
||||
infill_overlap = 10%
|
||||
compatible_printers_condition = nozzle_diameter[0]==1
|
||||
|
||||
[print:*1.2nozzle*]
|
||||
perimeters = 1
|
||||
infill_overlap = 10%
|
||||
compatible_printers_condition = nozzle_diameter[0]==1.2
|
||||
|
||||
[print:*0.08mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
top_solid_layers = 9
|
||||
layer_height = 0.08
|
||||
bridge_flow_ratio = 70%
|
||||
perimeter_acceleration = 400
|
||||
|
||||
[print:*0.16mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 6
|
||||
layer_height = 0.16
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
|
||||
[print:*0.24mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
layer_height = 0.24
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
[print:*0.32mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
layer_height = 0.32
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
[print:*0.48mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 2
|
||||
top_solid_layers = 3
|
||||
layer_height = 0.48
|
||||
bridge_flow_ratio = 90%
|
||||
|
||||
|
||||
[print:*0.05mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 20
|
||||
top_solid_layers = 20
|
||||
layer_height = 0.05
|
||||
|
||||
[print:*0.1mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 10
|
||||
top_solid_layers = 10
|
||||
layer_height = 0.1
|
||||
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
layer_height = 0.15
|
||||
|
||||
[print:*0.2mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 6
|
||||
layer_height = 0.2
|
||||
|
||||
[print:*0.3mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
layer_height = 0.3
|
||||
|
||||
[print:*0.4mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
layer_height = 0.4
|
||||
|
||||
[print:*0.5mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 2
|
||||
top_solid_layers = 3
|
||||
layer_height = 0.5
|
||||
|
||||
|
||||
|
||||
|
||||
[print:0.05mm NORMAL.15N]
|
||||
inherits = *0.05mm*; *0.15nozzle*
|
||||
[print:0.08mm NORMAL .15N]
|
||||
inherits = *0.08mm*; *0.15nozzle*
|
||||
[print:0.10mm SPEED .15N]
|
||||
inherits = *0.1mm*; *0.15nozzle*
|
||||
|
||||
[print:0.05mm FINE .2N]
|
||||
inherits = *0.05mm*; *0.2nozzle*
|
||||
[print:0.08mm NORMAL .2N]
|
||||
inherits = *0.08mm*; *0.2nozzle*
|
||||
[print:0.10mm NORMAL .2N]
|
||||
inherits = *0.1mm*; *0.2nozzle*
|
||||
[print:0.16mm SPEED .2N]
|
||||
inherits = *0.16mm*; *0.2nozzle*
|
||||
|
||||
[print:0.05mm FINE .25N]
|
||||
inherits = *0.05mm*; *0.25nozzle*
|
||||
[print:0.08mm FINE .25N]
|
||||
inherits = *0.08mm*; *0.25nozzle*
|
||||
[print:0.10mm NORMAL .25N]
|
||||
inherits = *0.1mm*; *0.25nozzle*
|
||||
[print:0.16mm NORMAL .25N]
|
||||
inherits = *0.16mm*; *0.25nozzle*
|
||||
[print:0.20mm SPEED .25N]
|
||||
inherits = *0.2mm*; *0.25nozzle*
|
||||
|
||||
[print:0.05mm EXTRA FINE .3N]
|
||||
inherits = *0.05mm*; *0.3nozzle*
|
||||
[print:0.08mm FINE .3N]
|
||||
inherits = *0.08mm*; *0.3nozzle*
|
||||
[print:0.10mm FINE .3N]
|
||||
inherits = *0.1mm*; *0.3nozzle*
|
||||
[print:0.16mm NORMAL .3N]
|
||||
inherits = *0.16mm*; *0.3nozzle*
|
||||
[print:0.20mm SPEED .3N]
|
||||
inherits = *0.2mm*; *0.3nozzle*
|
||||
[print:0.24mm SPEED .3N]
|
||||
inherits = *0.24mm*; *0.3nozzle*
|
||||
|
||||
[print:0.05mm EXTRA FINE .4N]
|
||||
inherits = *0.05mm*; *0.4nozzle*
|
||||
[print:0.08mm EXTRA FINE .4N]
|
||||
inherits = *0.08mm*; *0.4nozzle*
|
||||
[print:0.10mm FINE .4N]
|
||||
inherits = *0.1mm*; *0.4nozzle*
|
||||
[print:0.16mm NORMAL .4N]
|
||||
inherits = *0.16mm*; *0.4nozzle*
|
||||
[print:0.20mm NORMAL .4N]
|
||||
inherits = *0.2mm*; *0.4nozzle*
|
||||
[print:0.24mm SPEED .4N]
|
||||
inherits = *0.24mm*; *0.4nozzle*
|
||||
[print:0.30mm SPEED .4N]
|
||||
inherits = *0.3mm*; *0.4nozzle*
|
||||
[print:0.32mm SPEED .4N]
|
||||
inherits = *0.32mm*; *0.4nozzle*
|
||||
|
||||
[print:0.10mm FINE .5N]
|
||||
inherits = *0.1mm*; *0.5nozzle*
|
||||
[print:0.16mm FINE .5N]
|
||||
inherits = *0.16mm*; *0.5nozzle*
|
||||
[print:0.20mm NORMAL .5N]
|
||||
inherits = *0.2mm*; *0.5nozzle*
|
||||
[print:0.24mm NORMAL .5N]
|
||||
inherits = *0.24mm*; *0.5nozzle*
|
||||
[print:0.30mm SPEED .5N]
|
||||
inherits = *0.3mm*; *0.5nozzle*
|
||||
[print:0.32mm SPEED .5N]
|
||||
inherits = *0.32mm*; *0.5nozzle*
|
||||
|
||||
[print:0.10mm EXTRA FINE .6N]
|
||||
inherits = *0.1mm*; *0.6nozzle*
|
||||
[print:0.16mm FINE .6N]
|
||||
inherits = *0.16mm*; *0.6nozzle*
|
||||
[print:0.20mm FINE .6N]
|
||||
inherits = *0.2mm*; *0.6nozzle*
|
||||
[print:0.24mm NORMAL .6N]
|
||||
inherits = *0.24mm*; *0.6nozzle*
|
||||
[print:0.30mm NORMAL .6N]
|
||||
inherits = *0.3mm*; *0.6nozzle*
|
||||
[print:0.32mm NORMAL .6N]
|
||||
inherits = *0.32mm*; *0.6nozzle*
|
||||
[print:0.40mm SPEED .6N]
|
||||
inherits = *0.4mm*; *0.6nozzle*
|
||||
[print:0.48mm SPEED .6N]
|
||||
inherits = *0.48mm*; *0.6nozzle*
|
||||
|
||||
[print:0.20mm FINE .8N]
|
||||
inherits = *0.2mm*; *0.8nozzle*
|
||||
[print:0.24mm FINE .8N]
|
||||
inherits = *0.24mm*; *0.8nozzle*
|
||||
[print:0.30mm NORMAL .8N]
|
||||
inherits = *0.3mm*; *0.8nozzle*
|
||||
[print:0.32mm NORMAL .8N]
|
||||
inherits = *0.32mm*; *0.8nozzle*
|
||||
[print:0.40mm NORMAL .8N]
|
||||
inherits = *0.4mm*; *0.8nozzle*
|
||||
[print:0.48mm NORMAL .8N]
|
||||
inherits = *0.48mm*; *0.8nozzle*
|
||||
[print:0.50mm SPEED .8N]
|
||||
inherits = *0.5mm*; *0.8nozzle*
|
||||
|
||||
[print:0.30mm FINE 1N]
|
||||
inherits = *0.3mm*; *1.0nozzle*
|
||||
[print:0.32mm FINE 1N]
|
||||
inherits = *0.32mm*; *1.0nozzle*
|
||||
[print:0.40mm FINE 1N]
|
||||
inherits = *0.4mm*; *1.0nozzle*
|
||||
[print:0.48mm NORMAL 1N]
|
||||
inherits = *0.48mm*; *1.0nozzle*
|
||||
[print:0.50mm NORMAL 1N]
|
||||
inherits = *0.5mm*; *1.0nozzle*
|
||||
|
||||
[print:0.30mm FINE 1.2N]
|
||||
inherits = *0.3mm*; *1.2nozzle*
|
||||
[print:0.32mm FINE 1.2N]
|
||||
inherits = *0.32mm*; *1.2nozzle*
|
||||
[print:0.40mm FINE 1.2N]
|
||||
inherits = *0.4mm*; *1.2nozzle*
|
||||
[print:0.48mm NORMAL 1.2N]
|
||||
inherits = *0.48mm*; *1.2nozzle*
|
||||
[print:0.50mm NORMAL 1.2N]
|
||||
inherits = *0.5mm*; *1.2nozzle*
|
||||
|
||||
|
||||
[filament:*common*]
|
||||
cooling = 1
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_toolchange_delay = 0
|
||||
filament_cooling_moves = 4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_load_time = 0
|
||||
filament_unload_time = 0
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
||||
|
||||
|
||||
[filament:Basic PLA]
|
||||
inherits = *common*
|
||||
bed_temperature = 55
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_max_volumetric_speed = 15
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 215
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
top_fan_speed = 100
|
||||
temperature = 205
|
||||
|
||||
[filament:Basic PET]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = PET
|
||||
filament_density = 1.45
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature =70
|
||||
first_layer_temperature = 230
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 30
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 100
|
||||
top_fan_speed = 20
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
||||
temperature = 240
|
||||
|
||||
[filament:Basic ABS]
|
||||
inherits = *common*
|
||||
bed_temperature = 90
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #3A80CA
|
||||
filament_max_volumetric_speed = 11
|
||||
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_type = ABS
|
||||
filament_density = 1.04
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 250
|
||||
fan_always_on = 0
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
bridge_fan_speed = 30
|
||||
temperature = 240
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 62 KiB |
@ -1,28 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.12-susi ender-3 bltouch fix
|
||||
0.0.12 Added Ender-3V2 and filament profiles.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.11 Updated machine limits for Ender 5 and Ender 5 Plus.
|
||||
0.0.10 Parameter consistency improvements. Enabled conservative elephant foot compensation.
|
||||
0.0.9 Fixed end g-code for Ender 5.
|
||||
0.0.8-susi remove resolution to use default
|
||||
0.0.8 Slight end g-code improvements and spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha2
|
||||
0.0.6-susi2 Fix G92 that mess up not-relative printer.
|
||||
0.0.6-susi Updated start g-code for Creality printers
|
||||
0.0.6 Added filament profiles, adjusted temperatures, updated start g-code for some models.
|
||||
0.0.5 Added 0.08mm SUPERDETAIL and 0.28mm SUPERDRAFT print profiles. Updated OPTIMAL print profile.
|
||||
0.0.5 Superslicer adaptations
|
||||
0.0.4 Added initial CR-10 profile, end g-code improvements.
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.3 Added Ender-2, Ender-3 BLTouch, updated Ender-3 bed texture.
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.2 Updated for PrusaSlicer 2.2.0-rc
|
||||
0.0.2-beta Update for PrusaSlicer 2.2.0-beta
|
||||
0.0.2-alpha1 Extended list of default filaments to be installed
|
||||
0.0.2-alpha0 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 12.2.0
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
0.0.1 Initial version
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 28 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 27 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 23 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 40 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 37 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 27 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 29 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 41 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 50 KiB |
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="300mm" height="300mm" version="1.1" viewBox="0 0 300 300" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="299.5" height="299.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="300mm" height="220mm" version="1.1" viewBox="0 0 300 220" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="299.5" height="219.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="400mm" height="400mm" version="1.1" viewBox="0 0 400 400" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="399.5" height="399.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="500mm" height="500mm" version="1.1" viewBox="0 0 500 500" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="499.5" height="499.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="225mm" height="225mm" version="1.1" viewBox="0 0 225 225" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="224.5" height="224.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
@ -1,560 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
sodipodi:docname="ender2.svg"
|
||||
inkscape:version="1.0 (4035a4fb49, 2020-05-01)"
|
||||
id="svg1883"
|
||||
version="1.1"
|
||||
viewBox="0 0 150 150"
|
||||
height="150mm"
|
||||
width="150mm">
|
||||
<defs
|
||||
id="defs1877" />
|
||||
<sodipodi:namedview
|
||||
inkscape:snap-page="false"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-x="85"
|
||||
inkscape:window-height="1177"
|
||||
inkscape:window-width="1827"
|
||||
borderlayer="false"
|
||||
showgrid="false"
|
||||
inkscape:document-rotation="0"
|
||||
inkscape:current-layer="layer1"
|
||||
inkscape:document-units="mm"
|
||||
inkscape:cy="318.48593"
|
||||
inkscape:cx="251.26164"
|
||||
inkscape:zoom="1.4142136"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:pageopacity="0"
|
||||
borderopacity="1"
|
||||
bordercolor="#f14bac"
|
||||
pagecolor="#5d5d5d"
|
||||
id="base">
|
||||
<inkscape:grid
|
||||
id="grid2446"
|
||||
type="xygrid" />
|
||||
</sodipodi:namedview>
|
||||
<metadata
|
||||
id="metadata1880">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title />
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<g
|
||||
inkscape:label="Layer 2"
|
||||
id="layer2"
|
||||
inkscape:groupmode="layer">
|
||||
<path
|
||||
sodipodi:nodetypes="cccccscsccsssccscsscscccccccssssccsscssccsscsccscscsccscsscscscsssccsssccccsccsscsccscscsccscsscscscscccccssscccc"
|
||||
d="m 104.83464,129.87598 -2.1e-4,10.24981 h 35.29136 v -10.25 z m 8.12259,2.01941 c 0.66867,0 1.17978,0.20044 1.53295,0.60064 0.35605,0.40018 0.53409,0.97529 0.53409,1.72563 v 3.84905 h -1.76328 v -3.84905 c 0,-0.36782 -0.12846,-0.5519 -0.38609,-0.5519 -0.24896,0 -0.37361,0.18408 -0.37361,0.5519 v 3.84905 h -1.76274 v -3.91101 c 0,-0.68562 0.20102,-1.23423 0.60339,-1.6462 0.40526,-0.41196 0.94369,-0.61811 1.61529,-0.61811 z m 23.39139,0 c 0.57318,0 1.0595,0.20486 1.45898,0.61388 0.40236,0.409 0.60339,0.90595 0.60339,1.49151 0,0.33547 -0.0737,0.64755 -0.22145,0.93592 l -0.70343,1.39037 h 0.99 v 1.74364 h -3.82978 l 1.90186,-3.62818 0.0651,-0.12394 c 0.0521,-0.097 0.0781,-0.19239 0.0781,-0.28655 0,-0.23835 -0.13768,-0.35752 -0.41267,-0.35752 -0.10711,0 -0.20084,0.041 -0.28189,0.12342 -0.0781,0.0795 -0.11724,0.17343 -0.11724,0.28231 0,0.12357 0.0521,0.23575 0.15631,0.33579 l -0.76022,1.37712 c -0.31842,-0.2001 -0.56285,-0.4548 -0.73365,-0.76376 -0.1708,-0.30897 -0.25637,-0.65013 -0.25637,-1.02384 0,-0.57969 0.20154,-1.07586 0.60391,-1.48782 0.40238,-0.4149 0.8887,-0.62235 1.45896,-0.62235 z m -28.03768,0.15042 h 1.53295 v 1.72988 h -1.12444 c -0.30395,0 -0.45593,0.10023 -0.45593,0.30031 0,0.11771 0.036,0.20027 0.10838,0.24736 0.0723,0.0442 0.20136,0.0662 0.38662,0.0662 h 0.97282 v 1.34164 h -1.15101 c -0.15631,0 -0.26742,0.0233 -0.334,0.0705 -0.0636,0.0471 -0.0958,0.12652 -0.0958,0.23834 0,0.12654 0.0335,0.2104 0.10005,0.2516 0.0665,0.0383 0.20243,0.0577 0.408,0.0577 h 1.1854 v 1.7214 h -1.38497 c -0.65132,0 -1.14941,-0.15761 -1.49388,-0.47246 -0.34448,-0.3178 -0.51689,-0.77554 -0.51689,-1.37289 v -2.36122 c 0,-0.57674 0.16245,-1.02384 0.48667,-1.34163 0.32711,-0.3178 0.78558,-0.4767 1.37612,-0.4767 z m 7.79453,0 h 2.29683 c 1.00739,0 1.79639,0.23211 2.36665,0.69704 0.67738,0.55614 1.01606,1.31091 1.01606,2.26429 0,0.91221 -0.28965,1.65685 -0.8686,2.23359 -0.57895,0.57674 -1.32453,0.86494 -2.23638,0.86494 -0.10712,0 -0.28208,-0.006 -0.52523,-0.0175 v -1.77012 h 0.28241 c 1.02764,0 1.54129,-0.43697 1.54129,-1.31092 0,-0.82097 -0.50497,-1.23145 -1.51523,-1.23145 h -0.59506 v 4.29502 h -1.76274 z m 8.25463,0 h 1.53242 v 1.72988 h -1.12444 c -0.30395,0 -0.45592,0.10023 -0.45592,0.30031 0,0.11771 0.036,0.20027 0.10837,0.24736 0.0723,0.0442 0.20136,0.0662 0.38663,0.0662 h 0.97231 v 1.34164 h -1.1505 c -0.15633,0 -0.26795,0.0233 -0.33453,0.0705 -0.0636,0.0471 -0.0953,0.12652 -0.0953,0.23834 0,0.12654 0.0334,0.2104 0.10006,0.2516 0.0666,0.0383 0.2025,0.0577 0.40799,0.0577 h 1.1854 v 1.7214 h -1.38497 c -0.65133,0 -1.1494,-0.15761 -1.49388,-0.47246 -0.34447,-0.3178 -0.51636,-0.77554 -0.51636,-1.37289 v -2.36122 c 0,-0.57674 0.16194,-1.02384 0.48615,-1.34163 0.32711,-0.3178 0.78609,-0.4767 1.37664,-0.4767 z m 2.54849,0 h 2.26245 c 0.68895,0 1.22304,0.17344 1.60225,0.52066 0.42265,0.38842 0.63361,0.88147 0.63361,1.47882 0,0.60911 -0.2618,1.1224 -0.78576,1.54025 l 1.01608,2.48517 h -1.84978 l -0.85557,-1.94227 v -1.54926 h 0.13913 c 0.37052,0 0.55596,-0.16201 0.55596,-0.4857 0,-0.28541 -0.21456,-0.42796 -0.64299,-0.42796 h -0.31263 v 4.40519 h -1.76275 z"
|
||||
style="display:inline;fill:#ffffff;stroke:#fdfdfd;stroke-width:0;stroke-linecap:butt;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0"
|
||||
id="rect205" />
|
||||
</g>
|
||||
<g
|
||||
id="layer1"
|
||||
inkscape:groupmode="layer"
|
||||
inkscape:label="Layer 1"
|
||||
style="display:inline">
|
||||
<path
|
||||
id="path2643"
|
||||
d="M 0,0 H 150 V 150 H 0 Z"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2645"
|
||||
d="M 75,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2647"
|
||||
d="M 0,75 H 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.75;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2649"
|
||||
d="M 25,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2651"
|
||||
d="M 50,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2653"
|
||||
d="M 100,0 V 150"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2655"
|
||||
d="m 125,0 0,130"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.5;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,25 H 2.0000005e-6"
|
||||
id="path2649-5" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,50 H 2.0000005e-6"
|
||||
id="path2651-4" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,100 H 2.0000005e-6"
|
||||
id="path2653-9" />
|
||||
<path
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="M 150,125 H 2.0000005e-6"
|
||||
id="path2655-5" />
|
||||
<path
|
||||
id="path2681"
|
||||
d="M 4.9735417,-0.26458333 V 150.26458"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2683"
|
||||
d="M 9.9911806,150.26458 V -0.26458333"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2685"
|
||||
d="M 15.008819,-0.26458333 V 150.26458"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2687"
|
||||
d="M 20.026458,150.26458 V -0.26458333"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.5, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 29.982361,-0.52917 V 150"
|
||||
id="path2681-2" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 35,150 V -0.52917"
|
||||
id="path2683-1" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 40.017638,-0.52917 V 150"
|
||||
id="path2685-5" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 45.035278,150 V -0.52917"
|
||||
id="path2687-4" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 54.964723,0 V 150.52917"
|
||||
id="path2681-9" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 59.982362,150.52917 V 0"
|
||||
id="path2683-8" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 65,0 V 150.52917"
|
||||
id="path2685-4" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 70.01764,150.52917 V 0"
|
||||
id="path2687-7" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 80,-0.52917033 V 150"
|
||||
id="path2681-3" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 85.017639,150 V -0.52917033"
|
||||
id="path2683-6" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 90.035277,-0.52917033 V 150"
|
||||
id="path2685-3" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 95.052918,150 V -0.52917033"
|
||||
id="path2687-44" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 104.96472,0 V 150.52917"
|
||||
id="path2681-36" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 110,130 109.98236,0"
|
||||
id="path2683-5"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 115,0 0,130"
|
||||
id="path2685-7"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 120,130 120.01764,0"
|
||||
id="path2687-48"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 129.96472,0 130,130"
|
||||
id="path2681-0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 135,130 V 0"
|
||||
id="path2683-0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 140,0 0,150"
|
||||
id="path2685-2"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 145.01764,150.52917 V 0"
|
||||
id="path2687-47" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 149.73541,4.955902 0,5"
|
||||
id="path2681-39"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 0,10 149.73541,9.973541"
|
||||
id="path2683-3"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 149.73541,14.991179 0,15"
|
||||
id="path2685-51"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 0,20 149.73541,0.0088"
|
||||
id="path2687-486"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-2-1"
|
||||
d="M 150,30 H 0"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-1-9"
|
||||
d="M 0,35 150,34.98236"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-5-4"
|
||||
d="M 150,40 H 0"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2687-4-9"
|
||||
d="m 0,45 150,0.01764"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-9-6"
|
||||
d="M 149.47083,54.94708 0,55"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-8-0"
|
||||
d="M 0,60 149.47083,59.96472"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-4-7"
|
||||
d="M 149.47083,64.98236 0,65"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-3-7"
|
||||
d="M 150,79.98236 0,80"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-6-0"
|
||||
d="M 0,85 H 150"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-3-3"
|
||||
d="M 150,90.01764 H -0.529169"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
id="path2687-44-3"
|
||||
d="m 0,95 150,0.03528"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-36-5"
|
||||
d="M 149.47083,104.94708 0,105"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-5-1"
|
||||
d="m 0,110 149.47083,-0.0353"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-7-5"
|
||||
d="M 149.47083,114.98236 0,115"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2687-48-9"
|
||||
d="M 0,120 H 149.47083"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2681-0-8"
|
||||
d="M 150,130 0,130"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2683-0-5"
|
||||
d="M 0,135 H 105"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2685-2-7"
|
||||
d="M 150,140 H 0"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
id="path2687-47-6"
|
||||
d="M 0,145 H 149.47083"
|
||||
style="fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
id="path2683-5-5"
|
||||
d="m 110,150 0,-10"
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 115,150 V 140"
|
||||
id="path2683-5-5-6"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 120,150 V 140"
|
||||
id="path2683-5-5-0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 130,150 V 140"
|
||||
id="path2683-5-5-9"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 135,150 V 140"
|
||||
id="path2683-5-5-2"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
style="display:inline;fill:none;stroke:#ffffff;stroke-width:0.499999;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
d="m 125,140 0,10"
|
||||
id="path2655-0" />
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-4"
|
||||
aria-label="125">
|
||||
<path
|
||||
id="path188"
|
||||
d="M 121.63635,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24718 v 0.1868966 z" />
|
||||
<path
|
||||
id="path190"
|
||||
d="M 122.58805,2.0732279 V 1.9181985 l 0.26614,-0.2661338 q 0.0749,-0.074931 0.11972,-0.1291912 0.0456,-0.05426 0.0698,-0.096463 0.025,-0.043064 0.0327,-0.079237 0.008,-0.036174 0.008,-0.074931 0,-0.031867 -0.0103,-0.060289 -0.0103,-0.029283 -0.0301,-0.049954 -0.0198,-0.021532 -0.05,-0.03359 -0.0301,-0.012919 -0.0689,-0.012919 -0.0663,0 -0.12316,0.029283 -0.0568,0.028422 -0.10766,0.076654 l -0.1111,-0.1429716 q 0.0732,-0.068041 0.1645,-0.10852056 0.0922,-0.0413412 0.19895,-0.0413412 0.0827,0 0.14987,0.0215319 0.0672,0.0206706 0.11455,0.0620118 0.0482,0.041341 0.0741,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.0181,0.125746 -0.0181,0.057705 -0.0525,0.112827 -0.0344,0.055122 -0.0853,0.1102431 -0.0499,0.055122 -0.11455,0.1162721 l -0.16364,0.1558906 h 0.47456 v 0.1937868 z" />
|
||||
<path
|
||||
id="path192"
|
||||
d="m 124.31491,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10507,0.1179946 -0.0672,0.048231 -0.15848,0.073208 -0.0913,0.024977 -0.19809,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11282,0.019809 0.0637,0.00689 0.13006,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 H 123.6035 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.1378,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-9"
|
||||
aria-label="100">
|
||||
<path
|
||||
id="path181"
|
||||
d="M 96.636346,2.0732279 V 1.8863313 H 96.92315 V 1.1628608 l -0.249769,0.1378039 -0.0689,-0.1713936 0.357429,-0.18861909 h 0.176561 V 1.8863313 h 0.247186 v 0.1868966 z" />
|
||||
<path
|
||||
id="path183"
|
||||
d="m 98.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03015,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.08441,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03015,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01722,0.076653 -0.01722,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 97.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z" />
|
||||
<path
|
||||
id="path185"
|
||||
d="m 99.372615,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.05771,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171394,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171393,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666627,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.61e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 l -0.419441,0.3031686 q 0.02756,0.083544 0.07752,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01722,-0.077515 0.01722,-0.1817289 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-99"
|
||||
aria-label="25">
|
||||
<path
|
||||
id="path166"
|
||||
style="stroke-width:0.264583"
|
||||
d="M 22.616538,2.0732279 V 1.9181985 l 0.266134,-0.2661338 q 0.07493,-0.074931 0.119717,-0.1291912 0.04565,-0.05426 0.06976,-0.096463 0.02498,-0.043064 0.03273,-0.079237 0.0078,-0.036174 0.0078,-0.074931 0,-0.031867 -0.01034,-0.060289 -0.01034,-0.029283 -0.03014,-0.049954 -0.01981,-0.021532 -0.04995,-0.03359 -0.03015,-0.012919 -0.0689,-0.012919 -0.06632,0 -0.123163,0.029283 -0.05684,0.028422 -0.107659,0.076654 L 22.611371,1.0784559 q 0.07321,-0.068041 0.164503,-0.10852056 0.09216,-0.0413412 0.198955,-0.0413412 0.08268,0 0.149861,0.0215319 0.06718,0.0206706 0.11455,0.0620118 0.04823,0.041341 0.07407,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.01809,0.125746 -0.01809,0.057705 -0.05254,0.112827 -0.03445,0.055122 -0.08527,0.1102431 -0.04995,0.055122 -0.114549,0.1162721 l -0.163642,0.1558906 h 0.474562 v 0.1937868 z" />
|
||||
<path
|
||||
id="path168"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 24.343394,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05685,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06374,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 23.631981 V 0.94754221 h 0.649401 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-3"
|
||||
aria-label="50">
|
||||
<path
|
||||
id="path171"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 48.371874,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105075,0.1179946 -0.06718,0.048231 -0.158475,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03015,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06373,0.00689 0.130052,0.00689 0.129191,0 0.196371,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 47.660462 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164503,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z" />
|
||||
<path
|
||||
id="path173"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 49.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03015,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03015,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 48.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-7"
|
||||
aria-label="75">
|
||||
<path
|
||||
id="path176"
|
||||
style="stroke-width:0.264583"
|
||||
d="M 72.926595,2.0732279 H 72.688884 L 73.136746,1.150803 H 72.596727 V 0.94754221 h 0.782037 V 1.1309937 Z" />
|
||||
<path
|
||||
id="path178"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 74.343392,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112826,0.019809 0.06373,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 73.631979 V 0.94754221 H 74.28138 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.04335936,147.09955)"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text966-0-5-1"
|
||||
aria-label="150">
|
||||
<path
|
||||
id="path195"
|
||||
style="stroke-width:0.264583"
|
||||
d="M 146.47099,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24719 v 0.1868966 z" />
|
||||
<path
|
||||
id="path197"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 148.17803,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10508,0.1179946 -0.0672,0.048231 -0.15847,0.073208 -0.0913,0.024977 -0.1981,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11283,0.019809 0.0637,0.00689 0.13005,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 h -0.22049 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.13781,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z" />
|
||||
<path
|
||||
id="path199"
|
||||
style="stroke-width:0.264583"
|
||||
d="m 149.20726,1.505648 q 0,0.1386652 -0.0301,0.2480471 -0.0301,0.1093818 -0.0887,0.185174 -0.0577,0.074931 -0.14125,0.1145495 -0.0835,0.039619 -0.1912,0.039619 -0.093,0 -0.1714,-0.032728 -0.0784,-0.032729 -0.13522,-0.1024917 -0.0568,-0.070624 -0.0887,-0.1800063 -0.0319,-0.1093819 -0.0319,-0.2618275 0,-0.1386652 0.0301,-0.248047 0.031,-0.1093819 0.0887,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.1912,-0.0396186 0.093,0 0.1714,0.0327284 0.0784,0.0327284 0.13436,0.10249171 0.0568,0.069763 0.0887,0.179145 0.0319,0.1093819 0.0319,0.2626879 z m -0.66663,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.002,0.030145 l 0.42203,-0.3048912 q -0.0301,-0.085266 -0.0801,-0.125746 -0.0491,-0.041341 -0.11627,-0.041341 -0.0482,0 -0.0896,0.024977 -0.0413,0.024116 -0.0723,0.074931 -0.0301,0.050815 -0.0482,0.1274686 -0.0172,0.076653 -0.0172,0.1817289 z m 0.45475,0.00345 q 0,-0.014642 -8.6e-4,-0.029283 -8.6e-4,-0.015503 -8.6e-4,-0.029283 l -0.41944,0.3031686 q 0.0276,0.083544 0.0775,0.1240235 0.05,0.04048 0.11628,0.04048 0.0482,0 0.0896,-0.024977 0.0422,-0.024977 0.0723,-0.074931 0.031,-0.050815 0.0482,-0.1274686 0.0172,-0.077515 0.0172,-0.1817289 z" />
|
||||
</g>
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="M 150,70 0.52917,70.01764"
|
||||
id="path2685-4-7-5" />
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
style="display:inline;fill:none;stroke:#fdfdfd;stroke-width:0.25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:0.499999, 0.25;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 140,135 h 10"
|
||||
id="path2683-0-5-5" />
|
||||
<g
|
||||
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:8.81944px;line-height:1.25;font-family:'Bauhaus 93';-inkscape-font-specification:'Bauhaus 93, Normal';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
id="text893"
|
||||
aria-label="ENDER 2">
|
||||
<g
|
||||
id="g220" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="125"
|
||||
id="text966-0-4-0"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-120.58115,24.81636)">
|
||||
<path
|
||||
d="M 121.63635,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24718 v 0.1868966 z"
|
||||
id="path188-1" />
|
||||
<path
|
||||
d="M 122.58805,2.0732279 V 1.9181985 l 0.26614,-0.2661338 q 0.0749,-0.074931 0.11972,-0.1291912 0.0456,-0.05426 0.0698,-0.096463 0.025,-0.043064 0.0327,-0.079237 0.008,-0.036174 0.008,-0.074931 0,-0.031867 -0.0103,-0.060289 -0.0103,-0.029283 -0.0301,-0.049954 -0.0198,-0.021532 -0.05,-0.03359 -0.0301,-0.012919 -0.0689,-0.012919 -0.0663,0 -0.12316,0.029283 -0.0568,0.028422 -0.10766,0.076654 l -0.1111,-0.1429716 q 0.0732,-0.068041 0.1645,-0.10852056 0.0922,-0.0413412 0.19895,-0.0413412 0.0827,0 0.14987,0.0215319 0.0672,0.0206706 0.11455,0.0620118 0.0482,0.041341 0.0741,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.0181,0.125746 -0.0181,0.057705 -0.0525,0.112827 -0.0344,0.055122 -0.0853,0.1102431 -0.0499,0.055122 -0.11455,0.1162721 l -0.16364,0.1558906 h 0.47456 v 0.1937868 z"
|
||||
id="path190-2" />
|
||||
<path
|
||||
d="m 124.31491,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10507,0.1179946 -0.0672,0.048231 -0.15848,0.073208 -0.0913,0.024977 -0.19809,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11282,0.019809 0.0637,0.00689 0.13006,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 H 123.6035 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.1378,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z"
|
||||
id="path192-3" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="100"
|
||||
id="text966-0-9-0"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-95.765044,49.636453)">
|
||||
<path
|
||||
d="M 96.636346,2.0732279 V 1.8863313 H 96.92315 V 1.1628608 l -0.249769,0.1378039 -0.0689,-0.1713936 0.357429,-0.18861909 h 0.176561 V 1.8863313 h 0.247186 v 0.1868966 z"
|
||||
id="path181-5" />
|
||||
<path
|
||||
d="m 98.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03015,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.08441,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03015,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01722,0.076653 -0.01722,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 97.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z"
|
||||
id="path183-5" />
|
||||
<path
|
||||
d="m 99.372615,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.05771,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171394,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03014,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171393,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666627,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03014,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.61e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 l -0.419441,0.3031686 q 0.02756,0.083544 0.07752,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01722,-0.077515 0.01722,-0.1817289 z"
|
||||
id="path185-2" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="25"
|
||||
id="text966-0-99-1"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-21.665685,124.65487)">
|
||||
<path
|
||||
d="M 22.616538,2.0732279 V 1.9181985 l 0.266134,-0.2661338 q 0.07493,-0.074931 0.119717,-0.1291912 0.04565,-0.05426 0.06976,-0.096463 0.02498,-0.043064 0.03273,-0.079237 0.0078,-0.036174 0.0078,-0.074931 0,-0.031867 -0.01034,-0.060289 -0.01034,-0.029283 -0.03014,-0.049954 -0.01981,-0.021532 -0.04995,-0.03359 -0.03015,-0.012919 -0.0689,-0.012919 -0.06632,0 -0.123163,0.029283 -0.05684,0.028422 -0.107659,0.076654 L 22.611371,1.0784559 q 0.07321,-0.068041 0.164503,-0.10852056 0.09216,-0.0413412 0.198955,-0.0413412 0.08268,0 0.149861,0.0215319 0.06718,0.0206706 0.11455,0.0620118 0.04823,0.041341 0.07407,0.1033529 0.0267,0.062012 0.0267,0.1429716 0,0.067179 -0.01809,0.125746 -0.01809,0.057705 -0.05254,0.112827 -0.03445,0.055122 -0.08527,0.1102431 -0.04995,0.055122 -0.114549,0.1162721 l -0.163642,0.1558906 h 0.474562 v 0.1937868 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path166-8" />
|
||||
<path
|
||||
d="m 24.343394,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05685,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06374,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 23.631981 V 0.94754221 h 0.649401 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path168-6" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="50"
|
||||
id="text966-0-3-4"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-46.758479,99.60519)">
|
||||
<path
|
||||
d="m 48.371874,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105075,0.1179946 -0.06718,0.048231 -0.158475,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03015,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112827,0.019809 0.06373,0.00689 0.130052,0.00689 0.129191,0 0.196371,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 47.660462 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164503,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path171-2" />
|
||||
<path
|
||||
d="m 49.401097,1.505648 q 0,0.1386652 -0.03014,0.2480471 -0.03014,0.1093818 -0.08871,0.185174 -0.0577,0.074931 -0.141249,0.1145495 -0.08354,0.039619 -0.191203,0.039619 -0.09302,0 -0.171393,-0.032728 -0.07838,-0.032729 -0.13522,-0.1024917 -0.05684,-0.070624 -0.08871,-0.1800063 -0.03187,-0.1093819 -0.03187,-0.2618275 0,-0.1386652 0.03015,-0.248047 0.03101,-0.1093819 0.08871,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.191203,-0.0396186 0.09302,0 0.171394,0.0327284 0.07838,0.0327284 0.134359,0.10249171 0.05684,0.069763 0.08871,0.179145 0.03187,0.1093819 0.03187,0.2626887 z m -0.666626,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.0017,0.030145 l 0.422047,-0.304896 q -0.03014,-0.085266 -0.0801,-0.125746 -0.04909,-0.041341 -0.116272,-0.041341 -0.04823,0 -0.08957,0.024977 -0.04134,0.024116 -0.07235,0.074931 -0.03015,0.050815 -0.04823,0.1274686 -0.01723,0.076653 -0.01723,0.1817289 z m 0.454753,0.00345 q 0,-0.014642 -8.62e-4,-0.029283 -8.61e-4,-0.015503 -8.61e-4,-0.029283 L 48.76806,1.7571402 q 0.02756,0.083544 0.07751,0.1240235 0.04995,0.04048 0.116272,0.04048 0.04823,0 0.08957,-0.024977 0.0422,-0.024977 0.07235,-0.074931 0.03101,-0.050815 0.04823,-0.1274686 0.01723,-0.077515 0.01723,-0.1817289 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path173-7" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="75"
|
||||
id="text966-0-7-6"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-71.57512,75.04448)">
|
||||
<path
|
||||
d="M 72.926595,2.0732279 H 72.688884 L 73.136746,1.150803 H 72.596727 V 0.94754221 h 0.782037 V 1.1309937 Z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path176-3" />
|
||||
<path
|
||||
d="m 74.343392,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.105076,0.1179946 -0.06718,0.048231 -0.158474,0.073208 -0.0913,0.024977 -0.198093,0.024977 -0.0267,0 -0.05684,-0.00172 -0.03014,-0.00172 -0.06115,-0.00431 -0.03101,-0.00258 -0.06029,-0.00689 -0.02928,-0.00345 -0.05426,-0.00775 V 1.8863313 q 0.04909,0.012058 0.112826,0.019809 0.06373,0.00689 0.130053,0.00689 0.129191,0 0.19637,-0.049093 0.06804,-0.049954 0.06804,-0.1378039 0,-0.091295 -0.06287,-0.1352201 -0.06287,-0.044786 -0.203261,-0.044786 H 73.631979 V 0.94754221 H 74.28138 V 1.1456353 h -0.45303 v 0.229099 h 0.08096 q 0.08613,0 0.164504,0.015503 0.07838,0.015503 0.137804,0.05426 0.06029,0.037896 0.0956,0.1033529 0.03617,0.065457 0.03617,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path178-3" />
|
||||
</g>
|
||||
<g
|
||||
aria-label="150"
|
||||
id="text966-0-5-1-6"
|
||||
style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:1.76389px;line-height:1.25;font-family:Consolas;-inkscape-font-specification:'Consolas, Bold';font-variant-ligatures:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-east-asian:normal;display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.264583"
|
||||
transform="translate(-145.49952,-0.01156767)">
|
||||
<path
|
||||
d="M 146.47099,2.0732279 V 1.8863313 h 0.2868 V 1.1628608 l -0.24977,0.1378039 -0.0689,-0.1713936 0.35743,-0.18861909 h 0.17656 V 1.8863313 h 0.24719 v 0.1868966 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path195-7" />
|
||||
<path
|
||||
d="m 148.17803,1.7132152 q 0,0.090434 -0.0379,0.1610583 -0.0379,0.069763 -0.10508,0.1179946 -0.0672,0.048231 -0.15847,0.073208 -0.0913,0.024977 -0.1981,0.024977 -0.0267,0 -0.0568,-0.00172 -0.0301,-0.00172 -0.0611,-0.00431 -0.031,-0.00258 -0.0603,-0.00689 -0.0293,-0.00345 -0.0543,-0.00775 V 1.8863313 q 0.0491,0.012058 0.11283,0.019809 0.0637,0.00689 0.13005,0.00689 0.12919,0 0.19637,-0.049093 0.068,-0.049954 0.068,-0.1378039 0,-0.091295 -0.0629,-0.1352201 -0.0629,-0.044786 -0.20326,-0.044786 h -0.22049 V 0.94754221 h 0.6494 V 1.1456353 h -0.45303 v 0.229099 h 0.081 q 0.0861,0 0.1645,0.015503 0.0784,0.015503 0.13781,0.05426 0.0603,0.037896 0.0956,0.1033529 0.0362,0.065457 0.0362,0.1653647 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path197-7" />
|
||||
<path
|
||||
d="m 149.20726,1.505648 q 0,0.1386652 -0.0301,0.2480471 -0.0301,0.1093818 -0.0887,0.185174 -0.0577,0.074931 -0.14125,0.1145495 -0.0835,0.039619 -0.1912,0.039619 -0.093,0 -0.1714,-0.032728 -0.0784,-0.032729 -0.13522,-0.1024917 -0.0568,-0.070624 -0.0887,-0.1800063 -0.0319,-0.1093819 -0.0319,-0.2618275 0,-0.1386652 0.0301,-0.248047 0.031,-0.1093819 0.0887,-0.1843127 0.0577,-0.075792 0.14211,-0.11541081 0.0844,-0.0396186 0.1912,-0.0396186 0.093,0 0.1714,0.0327284 0.0784,0.0327284 0.13436,0.10249171 0.0568,0.069763 0.0887,0.179145 0.0319,0.1093819 0.0319,0.2626879 z m -0.66663,0.00345 q 0,0.017225 0,0.032728 0,0.014642 0.002,0.030145 l 0.42203,-0.3048912 q -0.0301,-0.085266 -0.0801,-0.125746 -0.0491,-0.041341 -0.11627,-0.041341 -0.0482,0 -0.0896,0.024977 -0.0413,0.024116 -0.0723,0.074931 -0.0301,0.050815 -0.0482,0.1274686 -0.0172,0.076653 -0.0172,0.1817289 z m 0.45475,0.00345 q 0,-0.014642 -8.6e-4,-0.029283 -8.6e-4,-0.015503 -8.6e-4,-0.029283 l -0.41944,0.3031686 q 0.0276,0.083544 0.0775,0.1240235 0.05,0.04048 0.11628,0.04048 0.0482,0 0.0896,-0.024977 0.0422,-0.024977 0.0723,-0.074931 0.031,-0.050815 0.0482,-0.1274686 0.0172,-0.077515 0.0172,-0.1817289 z"
|
||||
style="stroke-width:0.264583"
|
||||
id="path199-0" />
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 52 KiB |
File diff suppressed because it is too large
Load Diff
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 15 KiB |
File diff suppressed because it is too large
Load Diff
@ -1,4 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg width="350mm" height="350mm" version="1.1" viewBox="0 0 350 350" xmlns="http://www.w3.org/2000/svg">
|
||||
<rect x=".25" y=".25" width="349.5" height="349.5" fill="none" stroke="#fff" stroke-width=".5"/>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 251 B |
File diff suppressed because it is too large
Load Diff
@ -1,2 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-rc2
|
||||
0.0.1 Initial Version
|
||||
@ -1,842 +0,0 @@
|
||||
# Print profiles for the FLSun Delta printers.
|
||||
##
|
||||
# Author: https://github.com/Foxies-CSTL/PrusaSlicer
|
||||
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/5582
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = FLSun
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.1
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:QQSP]
|
||||
name = FLSun QQS Pro
|
||||
variants = 0.4; 0.6
|
||||
technology = FFF
|
||||
bed_model = QQSP_bed.stl
|
||||
bed_texture = QQSP.svg
|
||||
default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
|
||||
|
||||
[printer_model:Q5]
|
||||
name = FLSun Q5
|
||||
variants = 0.4; 0.6
|
||||
technology = FFF
|
||||
bed_model = Q5_bed.stl
|
||||
bed_texture = Q5.svg
|
||||
default_materials = Generic PLA @FLSUN; Generic PETG @FLSUN; Generic ABS @FLSUN; Generic SPLA @FLSUN; Generic FLEX @FLSUN
|
||||
|
||||
#########################################
|
||||
###### begin Common print presets #######
|
||||
#########################################
|
||||
|
||||
# Common print preset
|
||||
[print:*common_flsunq*]
|
||||
avoid_crossing_perimeters = 1
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_acceleration = 800
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.8
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
default_acceleration = 800
|
||||
dont_support_bridges = 1
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 45
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 800
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
infill_acceleration = 800
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
max_print_speed = 200
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco
|
||||
perimeters = 3
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 45
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 2
|
||||
skirt_distance = 5
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 25
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 1
|
||||
support_material_auto = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.38
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 0
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance = 0.2
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 0
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_min_thickness = 0.6
|
||||
travel_speed = 150
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 170
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
## QQS
|
||||
|
||||
[print:*QQSP*]
|
||||
bridge_acceleration = 1000
|
||||
default_acceleration = 1500
|
||||
first_layer_acceleration = 1000
|
||||
infill_acceleration = 800
|
||||
max_print_speed = 200
|
||||
perimeter_acceleration = 800
|
||||
|
||||
## Q5
|
||||
|
||||
[print:*Q5*]
|
||||
bridge_acceleration = 1000
|
||||
default_acceleration = 800
|
||||
first_layer_acceleration = 800
|
||||
infill_acceleration = 1000
|
||||
max_print_speed = 150
|
||||
perimeter_acceleration = 800
|
||||
|
||||
# Print parameters common to a 0.6mm diameter nozzle.
|
||||
|
||||
[print:*0.6nozzleFLSUN*]
|
||||
bridge_acceleration = 1000
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 25
|
||||
default_acceleration = 1000
|
||||
external_perimeter_extrusion_width = 0.65
|
||||
extrusion_width = 0.65
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_extrusion_width = 0.65
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
infill_acceleration = 1000
|
||||
infill_extrusion_width = 0.68
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.68
|
||||
support_material_speed = 40
|
||||
support_material_contact_distance = 0.15
|
||||
support_material_extrusion_width = 0.55
|
||||
support_material_xy_spacing = 80%
|
||||
top_infill_extrusion_width = 0.6
|
||||
travel_speed = 150
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{print_time}.gco
|
||||
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.08mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.08mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 10
|
||||
bridge_flow_ratio = 0.7
|
||||
layer_height = 0.08
|
||||
support_material_contact_distance = 0.06
|
||||
support_material_spacing = 1.5
|
||||
top_solid_layers = 12
|
||||
|
||||
[print:0.08mm DETAIL @FLSUN]
|
||||
inherits = *0.08mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bridge_acceleration = 200
|
||||
bridge_speed = 20
|
||||
external_perimeter_speed = 70%
|
||||
first_layer_acceleration = 500
|
||||
first_layer_speed = 40%
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 80
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
small_perimeter_speed = 70%
|
||||
solid_infill_speed = 95%
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 60%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.15mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.15mm_vase_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
avoid_crossing_perimeters = 1
|
||||
bottom_solid_min_thickness = 0.5
|
||||
bridge_flow_ratio = 0.9
|
||||
elefant_foot_compensation = 0.15
|
||||
ensure_vertical_shell_thickness = 1
|
||||
external_perimeter_extrusion_width = 0.9
|
||||
extra_perimeters = 1
|
||||
extrusion_width = 0.9
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_height = 0.3
|
||||
first_layer_extrusion_width = 0.9
|
||||
first_layer_speed = 20
|
||||
fill_density = 0%
|
||||
infill_extrusion_width = 0.9
|
||||
ironing = 0
|
||||
layer_height = 0.15
|
||||
min_skirt_length = 4
|
||||
max_print_speed = 100
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
perimeters = 1
|
||||
perimeter_extrusion_width = 0.9
|
||||
seam_position = aligned
|
||||
slice_closing_radius = 0.049
|
||||
solid_infill_extrusion_width = 0.6
|
||||
spiral_vase = 1
|
||||
support_material = 0
|
||||
top_solid_infill_speed = 40%
|
||||
top_solid_min_thickness = 0.6
|
||||
thin_walls = 0
|
||||
top_fill_pattern = rectilinear
|
||||
top_solid_layers = 0
|
||||
|
||||
[print:0.15mm VASE @FLSUN]
|
||||
inherits = *0.15mm_vase_flsunq*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bottom_solid_layers = 5
|
||||
external_perimeter_speed = 50%
|
||||
gap_fill_speed = 40
|
||||
infill_speed = 100
|
||||
perimeter_speed = 80
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 33%
|
||||
|
||||
[print:0.15mm VASE SPEED @FLSUN]
|
||||
inherits = *0.15mm_vase_flsunq*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
bridge_speed = 80
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_speed = 60%
|
||||
gap_fill_speed = 30
|
||||
infill_speed = 80
|
||||
perimeter_speed = 90
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 80%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.16mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.16mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 5
|
||||
bridge_flow_ratio = 0.9
|
||||
layer_height = 0.16
|
||||
support_material_contact_distance = 0.12
|
||||
top_solid_layers = 6
|
||||
|
||||
[print:0.16mm QUALITY @FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
fill_density = 15%
|
||||
fill_pattern = gyroid
|
||||
infill_speed = 80
|
||||
ironing = 0
|
||||
perimeter_speed = 90
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 50%
|
||||
top_solid_infill_speed = 30%
|
||||
|
||||
[print:0.16mm SPEED @FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 25%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 30%
|
||||
|
||||
[print:0.16mm DETAIL @0.6 nozzle FLSUN]
|
||||
inherits = *0.16mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.16mm DETAIL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 70
|
||||
max_print_speed = 80
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
infill_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.20mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
layer_height = 0.20
|
||||
support_material_contact_distance = 0.2
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:0.20mm QUALITY @FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *QQSP*
|
||||
avoid_crossing_perimeters = 1
|
||||
bridge_speed = 60
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
fill_density = 15%
|
||||
gap_fill_speed = 30
|
||||
infill_speed = 80
|
||||
ironing = 0
|
||||
ironing_speed = 20
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 85%
|
||||
solid_infill_speed = 90%
|
||||
thin_walls = 0
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
[print:0.20mm DETAIL @0.6 nozzle FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.20mm DETAIL
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 70
|
||||
max_print_speed = 80
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
infill_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
|
||||
[print:0.20mm SPEED @FLSUN]
|
||||
inherits = *0.20mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50
|
||||
extra_perimeters = 1
|
||||
first_layer_speed = 35
|
||||
infill_speed = 90
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 40%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.24mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.24mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
layer_height = 0.24
|
||||
support_material_contact_distance = 0.18
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.24mm DRAFT @FLSUN]
|
||||
inherits = *0.24mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
first_layer_speed = 20%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 60
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 95%
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.30mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.30mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
bridge_flow_ratio = 0.95
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
extrusion_width = 0.5
|
||||
infill_extrusion_width = 0.5
|
||||
layer_height = 0.30
|
||||
perimeter_extrusion_width = 0.5
|
||||
solid_infill_extrusion_width = 0.5
|
||||
support_material_contact_distance = 0.22
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.30mm QUALITY @0.6 nozzle FLSUN]
|
||||
inherits = *0.30mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.30mm QUALITY
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 35
|
||||
infill_speed = 90
|
||||
max_print_speed = 100
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 65
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
|
||||
[print:0.30mm SPEED @FLSUN]
|
||||
inherits = *0.30mm_flsunq*; *QQSP*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4
|
||||
external_perimeter_speed = 50%
|
||||
first_layer_speed = 20%
|
||||
infill_speed = 120
|
||||
perimeter_speed = 80
|
||||
small_perimeter_speed = 50%
|
||||
solid_infill_speed = 85%
|
||||
top_solid_infill_speed = 50%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.35mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.35mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 40
|
||||
first_layer_extrusion_width = 0.75
|
||||
layer_height = 0.35
|
||||
perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 50
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.35mm SPEED @0.6 nozzle FLSUN]
|
||||
inherits = *0.35mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.35mm SPEED
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 45
|
||||
infill_speed = 100
|
||||
max_print_speed = 120
|
||||
perimeter_speed = 65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.40mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.40mm_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bottom_solid_layers = 3
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 40
|
||||
first_layer_extrusion_width = 0.65
|
||||
infill_acceleration = 2000
|
||||
infill_speed = 60
|
||||
layer_height = 0.4
|
||||
perimeter_acceleration = 800
|
||||
perimeter_extrusion_width = 0.65
|
||||
perimeter_speed = 50
|
||||
solid_infill_extrusion_width = 0.65
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:0.40mm DRAFT @0.6 nozzle FLSUN]
|
||||
inherits = *0.40mm_flsunq*; *0.6nozzleFLSUN*
|
||||
# alias = 0.40mm DRAFT
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.6
|
||||
external_perimeter_speed = 60
|
||||
infill_speed = 100
|
||||
max_print_speed = 120
|
||||
perimeter_speed = 60
|
||||
solid_infill_speed = 60
|
||||
top_solid_infill_speed = 60
|
||||
external_perimeter_extrusion_width = 0.68
|
||||
perimeter_extrusion_width = 0.68
|
||||
infill_extrusion_width = 0.68
|
||||
solid_infill_extrusion_width = 0.68
|
||||
|
||||
#########################################
|
||||
########### end print presets ###########
|
||||
#########################################
|
||||
|
||||
#########################################
|
||||
######## begin filament presets #########
|
||||
#########################################
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common_flsunq*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/
|
||||
end_filament_gcode = "; Filament-specific end gcode"
|
||||
extrusion_multiplier = 1
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_fan_speed = 20
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 15
|
||||
start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n"
|
||||
|
||||
[filament:*PLA_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 95
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = 30
|
||||
filament_retract_length = 3
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = 30
|
||||
filament_max_volumetric_speed = 10
|
||||
filament_type = PLA
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 205
|
||||
max_fan_speed = 90
|
||||
min_fan_speed = 50
|
||||
temperature = 200
|
||||
|
||||
[filament:*PLA_VASE_flsunq*]
|
||||
inherits = *PLA_flsunq*
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 60
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
|
||||
[filament:*SPLA_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #008000
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = 70
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_length = 7.5
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = 70
|
||||
filament_type = PLA
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 50
|
||||
temperature = 215
|
||||
|
||||
[filament:*PET_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FFFFFF
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_length = 4
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 45
|
||||
filament_type = PETG
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature =80
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
temperature = 230
|
||||
|
||||
[filament:*FLEX_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.15
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #0000FF
|
||||
filament_density = 1.22
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 1.35
|
||||
filament_retract_length = 0.8
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = nil
|
||||
filament_type = FLEX
|
||||
filament_wipe = 0
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n;M900 K0; Disable Linear Advance 1.5\n"
|
||||
temperature = 240
|
||||
|
||||
[filament:*ABS_flsunq*]
|
||||
inherits = *common_flsunq*
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 30
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_density = 1.04
|
||||
filament_deretract_speed = nil
|
||||
filament_retract_length = 5
|
||||
filament_retract_lift = nil
|
||||
filament_retract_speed = 50
|
||||
filament_max_volumetric_speed = 10
|
||||
filament_type = ABS
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 245
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
slowdown_below_layer_time = 20
|
||||
temperature = 245
|
||||
top_fan_speed = 0
|
||||
|
||||
[filament:Generic PLA @FLSUN]
|
||||
inherits = *PLA_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic PLA VASE @FLSUN]
|
||||
inherits = *PLA_VASE_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic PETG @FLSUN]
|
||||
inherits = *PET_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic ABS @FLSUN]
|
||||
inherits = *ABS_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic FLEX @FLSUN]
|
||||
inherits = *FLEX_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic SPLA @FLSUN]
|
||||
inherits = *SPLA_flsunq*
|
||||
filament_vendor = Generic
|
||||
|
||||
#########################################
|
||||
######### end filament presets ##########
|
||||
#########################################
|
||||
|
||||
#########################################
|
||||
######### begin printer presets #########
|
||||
#########################################
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common_flsunq*]
|
||||
printer_technology = FFF
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 40
|
||||
end_gcode =
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0.32
|
||||
min_layer_height = 0.08
|
||||
nozzle_diameter = 0.4
|
||||
printer_notes =
|
||||
printer_settings_id =
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 70%
|
||||
retract_layer_change = 0
|
||||
retract_length = 0
|
||||
retract_length_toolchange = 1
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
default_print_profile = 0.20mm QUALITY @FLSUN
|
||||
default_filament_profile = Generic PLA @FLSUN
|
||||
|
||||
[printer:FLSun QQS Pro]
|
||||
inherits = *common_flsunq*
|
||||
bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14
|
||||
end_gcode = ; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up\nG1 X0 Y120 F3000 ; present print\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\n;M900 K0 ; reset linear acceleration(Marlin)\n; Shut down printer\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM18 S180 ;disable motors after 180s\nM300 S40 P10 ; Bip\nM117 Print finish.
|
||||
machine_max_acceleration_e = 3000,800
|
||||
machine_max_acceleration_extruding = 1500,800
|
||||
machine_max_acceleration_retracting = 2000,800
|
||||
machine_max_acceleration_x = 1500,800
|
||||
machine_max_acceleration_y = 1500,800
|
||||
machine_max_acceleration_z = 1500,800
|
||||
machine_max_feedrate_e = 60,30
|
||||
machine_max_feedrate_x = 200,150
|
||||
machine_max_feedrate_y = 200,150
|
||||
machine_max_feedrate_z = 200,150
|
||||
machine_max_jerk_e = 5,5
|
||||
machine_max_jerk_x = 5,10
|
||||
machine_max_jerk_y = 5,10
|
||||
machine_max_jerk_z = 5,10
|
||||
max_print_height = 360
|
||||
nozzle_diameter = 0.4
|
||||
printer_model = QQSP
|
||||
printer_variant = 0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQSP\nPRINTER_HAS_BOWDEN\n
|
||||
retract_length = 5
|
||||
retract_speed = 30
|
||||
retract_lift = 0.4
|
||||
silent_mode = 1
|
||||
start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250 ; wait between dual beep\nM300 S440 P200 ; 2nd beep for printer ready\nG4 S10 ; wait to clean the nozzle\nM300 S440 P200 ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...
|
||||
thumbnails = 16x16,260x260
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
|
||||
[printer:FLSun QQS Pro 0.6 nozzle]
|
||||
inherits = FLSun QQS Pro
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
|
||||
retract_length = 3.5
|
||||
retract_lift = 0.4
|
||||
retract_speed = 30
|
||||
deretract_speed = 40
|
||||
retract_before_wipe = 70%
|
||||
retract_before_travel = 1
|
||||
|
||||
[printer:FLSun Q5]
|
||||
inherits = *common_flsunq*
|
||||
bed_shape = 99.6195x8.71557,98.4808x17.3648,96.5926x25.8819,93.9693x34.202,90.6308x42.2618,86.6025x50,81.9152x57.3576,76.6044x64.2788,70.7107x70.7107,64.2788x76.6044,57.3576x81.9152,50x86.6025,42.2618x90.6308,34.202x93.9693,25.8819x96.5926,17.3648x98.4808,8.71557x99.6195,6.12323e-15x100,-8.71557x99.6195,-17.3648x98.4808,-25.8819x96.5926,-34.202x93.9693,-42.2618x90.6308,-50x86.6025,-57.3576x81.9152,-64.2788x76.6044,-70.7107x70.7107,-76.6044x64.2788,-81.9152x57.3576,-86.6025x50,-90.6308x42.2618,-93.9693x34.202,-96.5926x25.8819,-98.4808x17.3648,-99.6195x8.71557,-100x1.22465e-14,-99.6195x-8.71557,-98.4808x-17.3648,-96.5926x-25.8819,-93.9693x-34.202,-90.6308x-42.2618,-86.6025x-50,-81.9152x-57.3576,-76.6044x-64.2788,-70.7107x-70.7107,-64.2788x-76.6044,-57.3576x-81.9152,-50x-86.6025,-42.2618x-90.6308,-34.202x-93.9693,-25.8819x-96.5926,-17.3648x-98.4808,-8.71557x-99.6195,-1.83697e-14x-100,8.71557x-99.6195,17.3648x-98.4808,25.8819x-96.5926,34.202x-93.9693,42.2618x-90.6308,50x-86.6025,57.3576x-81.9152,64.2788x-76.6044,70.7107x-70.7107,76.6044x-64.2788,81.9152x-57.3576,86.6025x-50,90.6308x-42.2618,93.9693x-34.202,96.5926x-25.8819,98.4808x-17.3648,99.6195x-8.71557,100x-2.44929e-14
|
||||
end_gcode = M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n
|
||||
machine_max_acceleration_e = 3000
|
||||
machine_max_acceleration_extruding = 1500
|
||||
machine_max_acceleration_retracting = 2000
|
||||
machine_max_acceleration_x = 1500
|
||||
machine_max_acceleration_y = 1500
|
||||
machine_max_acceleration_z = 1500
|
||||
machine_max_feedrate_e = 60
|
||||
machine_max_feedrate_x = 200
|
||||
machine_max_feedrate_y = 200
|
||||
machine_max_feedrate_z = 200
|
||||
machine_max_jerk_e = 5
|
||||
machine_max_jerk_x = 5
|
||||
machine_max_jerk_y = 5
|
||||
machine_max_jerk_z = 5
|
||||
max_print_height = 200
|
||||
nozzle_diameter = 0.4
|
||||
printer_model = Q5
|
||||
printer_variant = 0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n
|
||||
retract_length = 3
|
||||
retract_lift = 0.3
|
||||
start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n
|
||||
thumbnails = 16x16,200x200
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
|
||||
[printer:FLSun Q5 0.6 nozzle]
|
||||
inherits = FLSun Q5
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle FLSUN
|
||||
retract_length = 3
|
||||
retract_lift = 0.4
|
||||
retract_speed = 50
|
||||
deretract_speed = 40
|
||||
retract_before_wipe = 0
|
||||
retract_before_travel = 1
|
||||
|
||||
#########################################
|
||||
####### end common print presets ########
|
||||
#########################################
|
||||
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 19 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 12 KiB |
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB |
@ -1,5 +0,0 @@
|
||||
min_slic3r_version = 2.1.0
|
||||
0.0.3-susi remove resolution to use default
|
||||
0.0.3 slic3r++ adaptation: overlapping & top pattern.
|
||||
0.0.2 changed flow ratio from float to %
|
||||
0.0.1 Initial version
|
||||
@ -1,377 +0,0 @@
|
||||
# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = LulzBot
|
||||
config_version = 0.0.3-susi
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
|
||||
|
||||
[printer_model:MINI_AERO]
|
||||
name = Mini Aero
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
#bed_model = mini_bed.stl
|
||||
#bed_texture = mini.svg
|
||||
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
|
||||
|
||||
[printer_model:TAZ6_AERO]
|
||||
name = Taz6 Aero
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
|
||||
|
||||
[print:0.3mm @lulzbot]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 3
|
||||
bridge_acceleration = 500
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 100%
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 0
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 500
|
||||
dont_support_bridges = 1
|
||||
first_layer_size_compensation = 0
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.56
|
||||
external_perimeter_speed = 50%
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.56
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
first_layer_acceleration = 500
|
||||
first_layer_extrusion_width = 0.6
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 40%
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 500
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.56
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 60
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 0
|
||||
notes =
|
||||
only_one_perimeter_top = 1
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 500
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.56
|
||||
perimeter_speed = 60
|
||||
perimeters = 3
|
||||
post_process =
|
||||
raft_layers = 0
|
||||
seam_position = hidden
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 3
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.56
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance_type = filament
|
||||
support_material_contact_distance_top = 0.2
|
||||
support_material_contact_distance_bottom = 0.2
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 1
|
||||
support_material_extrusion_width = 0.44
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 1
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
thin_perimeters = 1
|
||||
thin_walls = 1
|
||||
thin_walls_min_width = 50%
|
||||
thin_walls_overlap = 50%
|
||||
threads = 12
|
||||
top_fill_pattern = smooth
|
||||
top_infill_extrusion_width = 0.52
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 3
|
||||
travel_speed = 175
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
[filament:ColorFabb PLA-PHA @lulzbot]
|
||||
filament_vendor = ColorFabb
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 2.85
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 200
|
||||
|
||||
[filament:PrintedSolid Jesse PLA @lulzbot]
|
||||
filament_vendor = PrintedSolid
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 27
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 2.85
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 220
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 220
|
||||
|
||||
[printer:Mini Aero 0.5mm]
|
||||
printer_model = MINI_AERO
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.3mm @lulzbot
|
||||
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
|
||||
bed_shape = 0x0,154x0,154x154,0x154
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
deretract_speed = 20
|
||||
end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG92 E1 ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000 ; move to cooling position\nG1 E1 ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77 ; Stop GLCD Timer\nG1 X145 F1000 ; move extruder out of the way\nG1 Y175 F1000 ; present finished print\nM140 S0; cool downs\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 100,200
|
||||
machine_max_feedrate_e = 40,120
|
||||
machine_max_feedrate_x = 800,200
|
||||
machine_max_feedrate_y = 800,200
|
||||
machine_max_feedrate_z = 8,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 20,10
|
||||
machine_max_jerk_y = 20,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 158
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.5
|
||||
parking_pos_retraction = 92
|
||||
printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 1
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
[printer:Taz6 Aero 0.5mm]
|
||||
printer_model = TAZ6_AERO
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.3mm @lulzbot
|
||||
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
|
||||
bed_shape = 0x0,280x0,280x280,0x280
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
deretract_speed = 20
|
||||
end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n
|
||||
extra_loading_move = -2
|
||||
extruder_colour = ""
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 1000,5000
|
||||
machine_max_acceleration_extruding = 1000,1250
|
||||
machine_max_acceleration_retracting = 1000,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 100,200
|
||||
machine_max_feedrate_e = 40,120
|
||||
machine_max_feedrate_x = 800,200
|
||||
machine_max_feedrate_y = 800,200
|
||||
machine_max_feedrate_z = 3,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 12,10
|
||||
machine_max_jerk_y = 12,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_layer_height = 0
|
||||
max_print_height = 250
|
||||
min_layer_height = 0.07
|
||||
nozzle_diameter = 0.5
|
||||
parking_pos_retraction = 92
|
||||
printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
|
||||
printer_technology = FFF
|
||||
remaining_times = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 0
|
||||
retract_length = 2
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 0
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 48 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 42 KiB |
@ -1,161 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-rc1
|
||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.2.1 Updated FW version for MK2.5 family printers.
|
||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
1.2.0-susi remove resolution to use default
|
||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
||||
min_slic3r_version = 2.3.0-beta0
|
||||
1.2.1-beta0 remove G92 in layer change, as it's not understand by the slicer.
|
||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
||||
min_slic3r_version = 2.3.0-alpha4
|
||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.2.0-alpha0 Added filament spool weights
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||
1.1.11 SuperSlicer version
|
||||
1.1.10 Updated firmware version.
|
||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
||||
1.1.4 Added Prusament PC Blend filament profile.
|
||||
1.1.3 Added SLA material and filament profile
|
||||
1.1.6 superslicer: thumbnails & remove top_fan_speed
|
||||
1.1.5 slic3r++ adaptation: overlapping & top pattern.
|
||||
1.1.4 changed flow ratio from float to %
|
||||
1.1.3 slic3r++ version
|
||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||
# so they will see the print bed.
|
||||
max_slic3r_version = 12.2.0
|
||||
min_slic3r_version = 2.1.0
|
||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
||||
min_slic3r_version = 2.1.1-beta0
|
||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
||||
1.0.7 Updated layer height limits for MINI
|
||||
1.0.6 Added Prusa MINI profiles
|
||||
min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.5 Added SLA materials
|
||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
||||
1.0.3 Added filament profiles
|
||||
1.0.2 Added SLA materials
|
||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
||||
1.0.0-alpha1 Added Prusament ASA profile
|
||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.8.7 Updated firmware version
|
||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.8.5 Updated SL1 printer and material settings
|
||||
0.8.4 Added Prusament ASA profile
|
||||
0.8.3 FW version and SL1 materials update
|
||||
0.8.2 FFF and SL1 settings update
|
||||
0.8.1 Output settings and SLA materials update
|
||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.8.0-rc1 Updated SLA profiles
|
||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
||||
0.8.0-beta4 Updated SLA profiles
|
||||
0.8.0-beta3 Updated SLA profiles
|
||||
0.8.0-beta2 Updated SLA profiles
|
||||
0.8.0-beta1 Updated SLA profiles
|
||||
0.8.0-beta Updated SLA profiles
|
||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
||||
0.8.0-alpha8 Updated SLA profiles
|
||||
0.8.0-alpha7 Updated SLA profiles
|
||||
0.8.0-alpha6 Updated SLA profiles
|
||||
min_slic3r_version = 1.42.0-alpha
|
||||
0.8.0-alpha Updated SLA profiles
|
||||
0.4.0-alpha4 Updated SLA profiles
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.4.10 Updated firmware version
|
||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.4.8 MK2.5/3/S FW update
|
||||
0.4.7 MK2/S/MMU FW update
|
||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.4.1 New MK2.5S and MK3S FW versions
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||
0.3.10 Updated firmware version
|
||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.3.8 MK2.5/3/S FW update
|
||||
0.3.7 MK2/S/MMU FW update
|
||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||
0.3.5 New MK2.5 and MK3 FW versions
|
||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
0.3.3 Prusament PETG released
|
||||
0.3.2 New MK2.5 and MK3 FW versions
|
||||
0.3.1 New MK2.5 and MK3 FW versions
|
||||
0.3.0 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.9 New MK2.5 and MK3 FW versions
|
||||
0.2.8 New MK2.5 and MK3 FW version
|
||||
min_slic3r_version = 1.41.1
|
||||
0.2.7 New MK2.5 and MK3 FW version
|
||||
0.2.6 Added MMU2 MK2.5 settings
|
||||
min_slic3r_version = 1.41.0-alpha
|
||||
0.2.5 Prusament is out - added prusament settings
|
||||
0.2.4 Added soluble support profiles for MMU2
|
||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
||||
0.2.2 Edited MMU2 Single mode purge line
|
||||
0.2.1 Added PET and BVOH settings for MMU2
|
||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.18 Updated firmware version
|
||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.1.16 MK2.5/3/S FW update
|
||||
0.1.15 MK2/S/MMU FW update
|
||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||
0.1.13 New MK2.5 and MK3 FW versions
|
||||
0.1.12 New MK2.5 and MK3 FW versions
|
||||
0.1.11 fw version changed to 3.3.1
|
||||
0.1.10 MK3 jerk and acceleration update
|
||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
||||
0.1.6 Split the MK2.5 profile from the MK2S
|
||||
min_slic3r_version = 1.40.0-beta
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
0.1.4 edited fw version, added z-raise after print
|
||||
min_slic3r_version = 1.40.0-alpha
|
||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||
0.1.2 Wipe tower changes
|
||||
0.1.1 Minor print speed adjustments
|
||||
0.1.0 Initial
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 58 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 56 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 57 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 70 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 65 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 65 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 62 KiB |
@ -1,70 +0,0 @@
|
||||
<svg id="Layer_1" data-name="Layer 1" xmlns="http://www.w3.org/2000/svg" width="180.5mm" height="180.6mm" viewBox="0 0 511.7 512">
|
||||
<title>MINI_bed_texture</title>
|
||||
<path d="M510.6,510.9" transform="translate(0.4 0.4)" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<path d="M.4,510.9" transform="translate(0.4 0.4)" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<line x1="511" y1="511.3" x2="511" y2="0.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<path d="M.4.4" transform="translate(0.4 0.4)" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<path d="M510.6.4" transform="translate(0.4 0.4)" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<line x1="0.8" y1="0.8" x2="0.8" y2="511.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<line x1="0.8" y1="511.3" x2="0.8" y2="0.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<line x1="511" y1="0.8" x2="511" y2="511.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<line x1="0.8" y1="511.3" x2="511" y2="511.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<line x1="0.8" y1="0.8" x2="511" y2="0.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-width: 1.5px"/>
|
||||
<g>
|
||||
<g>
|
||||
<line x1="0.8" y1="383.6" x2="2.9" y2="383.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
<line x1="5" y1="383.6" x2="6.6" y2="383.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 0.5694814920425415,2.1355555057525635"/>
|
||||
<line x1="7.7" y1="383.6" x2="507.8" y2="383.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 4.271111011505127,2.1355555057525635,0.5694814920425415,2.1355555057525635"/>
|
||||
<line x1="508.9" y1="383.6" x2="511" y2="383.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
</g>
|
||||
<g>
|
||||
<line x1="0.8" y1="256" x2="2.9" y2="256" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
<line x1="5" y1="256" x2="6.6" y2="256" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 0.5694814920425415,2.1355555057525635"/>
|
||||
<line x1="7.7" y1="256" x2="507.8" y2="256" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 4.271111011505127,2.1355555057525635,0.5694814920425415,2.1355555057525635"/>
|
||||
<line x1="508.9" y1="256" x2="511" y2="256" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
</g>
|
||||
<g>
|
||||
<line x1="511" y1="128.4" x2="508.9" y2="128.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
<line x1="506.7" y1="128.4" x2="505.1" y2="128.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 0.5694814920425415,2.1355555057525635"/>
|
||||
<line x1="504" y1="128.4" x2="3.9" y2="128.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 4.271111011505127,2.1355555057525635,0.5694814920425415,2.1355555057525635"/>
|
||||
<line x1="2.9" y1="128.4" x2="0.8" y2="128.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
</g>
|
||||
<g>
|
||||
<line x1="128.3" y1="511.3" x2="128.3" y2="509.1" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
<line x1="128.3" y1="507" x2="128.3" y2="505.4" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 0.569789707660675,2.1367111206054688"/>
|
||||
<line x1="128.3" y1="504.3" x2="128.3" y2="3.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 4.2734222412109375,2.1367111206054688,0.569789707660675,2.1367111206054688"/>
|
||||
<line x1="128.3" y1="2.9" x2="128.3" y2="0.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
</g>
|
||||
<g>
|
||||
<line x1="255.9" y1="0.8" x2="255.9" y2="2.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
<line x1="255.9" y1="5" x2="255.9" y2="6.7" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 0.569789707660675,2.1367111206054688"/>
|
||||
<line x1="255.9" y1="7.7" x2="255.9" y2="508.1" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 4.2734222412109375,2.1367111206054688,0.569789707660675,2.1367111206054688"/>
|
||||
<line x1="255.9" y1="509.1" x2="255.9" y2="511.3" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
</g>
|
||||
<g>
|
||||
<line x1="383.4" y1="484.8" x2="383.4" y2="482.6" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
<line x1="383.4" y1="480.5" x2="383.4" y2="478.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 0.5708136558532715,2.1405510902404785"/>
|
||||
<line x1="383.4" y1="477.8" x2="383.4" y2="3.9" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round;stroke-dasharray: 4.281102180480957,2.1405510902404785,0.5708136558532715,2.1405510902404785"/>
|
||||
<line x1="383.4" y1="2.9" x2="383.4" y2="0.8" style="fill: none;stroke: #fff;stroke-linecap: round;stroke-linejoin: round"/>
|
||||
</g>
|
||||
</g>
|
||||
<g>
|
||||
<path d="M277.3,489.1c4.6,0,7.4,2.8,7.4,8.1s-2.9,8.1-7.4,8.1-7.4-2.9-7.4-8.1S272.9,489.1,277.3,489.1Zm3.7,8.1c0-3.8-1.5-5.7-3.7-5.7s-3.8,1.9-3.8,5.7,1.3,5.6,3.8,5.6S281,500.9,281,497.2Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M293.1,499h-2.5v6h-3.3V489.3h6.1a7.3,7.3,0,0,1,3.2.6,4.1,4.1,0,0,1,2.6,4,4.4,4.4,0,0,1-3.1,4.3h0l3.5,6.8H296Zm-.1-2.4c1.5,0,2.7-.7,2.7-2.5a2.4,2.4,0,0,0-2.7-2.5h-2.4v5Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M302,489.3h3.4V505H302Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M311.6,497.2c0,4,1.4,5.6,3.8,5.6s3.4-1.3,3.6-3.5V499h-3.7v-2.4h6.8V505h-2.6v-2.2h-.1a5,5,0,0,1-4.6,2.5c-4.4,0-6.8-3.1-6.8-7.9s3-8.3,7.4-8.3,6.1,1.7,6.4,4.9h-3.4a2.8,2.8,0,0,0-3-2.5C313,491.5,311.6,493.5,311.6,497.2Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M325.1,489.3h3.4V505h-3.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M331.7,489.3h3.7l5,8.5a16.8,16.8,0,0,1,1.2,2.3h0V489.3h3.1V505h-3.5l-5.3-8.7a12.8,12.8,0,0,1-1.1-2.4h-.1V505h-3Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M356.8,501.5H351l-1.1,3.5h-3.2l5.4-15.7h3.8l5.6,15.7h-3.6Zm-3.5-7.1-1.5,4.6H356l-1.5-4.5c-.4-1.4-.6-2.3-.6-2.3h0A15.3,15.3,0,0,1,353.3,494.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M363.4,489.3h3.4v13h6.8V505H363.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M384,499.6V505h-3.4V489.3h5.5c3.4,0,6,1.4,6,5s-2.8,5.3-6.3,5.3Zm2-2.5a2.5,2.5,0,0,0,2.8-2.7c0-1.9-1.1-2.7-2.8-2.7h-2v5.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M400.1,499h-2.4v6h-3.4V489.3h6.1a7.3,7.3,0,0,1,3.2.6,3.9,3.9,0,0,1,2.6,4,4.5,4.5,0,0,1-3,4.3h0l3.5,6.8H403Zm-.1-2.4c1.5,0,2.8-.7,2.8-2.5a2.4,2.4,0,0,0-2.7-2.5h-2.4v5Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M408.7,489.3H412v9.1a5.6,5.6,0,0,0,.6,3.2,3.6,3.6,0,0,0,5,0c.6-.8.5-2.1.5-3.2v-9.1h3.3v10.2c0,3.9-2.5,5.8-6.4,5.8s-6.3-1.8-6.3-5.8Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M432.4,493.5a2,2,0,0,0-2.3-2c-1.5,0-2.4.8-2.4,1.9s.6,1.7,2.1,1.9l2.4.5c2.8.5,4.1,2,4.1,4.3s-2.3,5.2-6.3,5.2-6.1-1.9-6.2-4.8h3.5a2.5,2.5,0,0,0,2.8,2.3c1.9,0,2.7-.9,2.7-2.1s-.5-1.7-2.2-2l-2.3-.4c-2.4-.5-4.1-1.9-4.1-4.4s2.2-4.8,5.9-4.8,5.7,2,5.8,4.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M447.4,501.5h-5.7l-1.2,3.5h-3.2l5.5-15.7h3.7l5.6,15.7h-3.5Zm-3.5-7.1-1.4,4.6h4.1l-1.4-4.5a11.3,11.3,0,0,1-.6-2.3h-.1A15.3,15.3,0,0,1,443.9,494.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M458.7,489.3h4.9l2.8,8.4a15.7,15.7,0,0,1,.7,2.3h0l.7-2.3,2.8-8.4h4.9V505h-3.3V492.7h-.1a26.9,26.9,0,0,1-1,3.3l-2.9,9h-2.5l-2.9-9a26.9,26.9,0,0,1-1-3.3h0V505h-3.1Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M478.6,489.3H482V505h-3.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M485.2,489.3h3.7l5,8.5a16.8,16.8,0,0,1,1.2,2.3h0V489.3h3.1V505h-3.5l-5.3-8.7a12.8,12.8,0,0,1-1.1-2.4h-.1V505h-3Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
<path d="M501.3,489.3h3.4V505h-3.4Z" transform="translate(0.4 0.4)" style="fill: #fff"/>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 8.8 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 61 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 61 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 9.2 KiB |
Binary file not shown.
@ -1,9 +0,0 @@
|
||||
min_slic3r_version = 2.3.0-alpha3
|
||||
0.0.6 Added material TPU 93A (SMARTFIL)
|
||||
0.0.5-susi remove resolution to use default
|
||||
0.0.5 Removed obsolete host keys.
|
||||
0.0.4 Added PLA, PETG profiles for 0.8 nozzle, update print materials
|
||||
0.0.3 Added DeltiQ 2, DeltiQ 2 Plus printers, 0.10mm, 0.20mm FLEX print profiles, updated print materials, flexprint extension support
|
||||
min_slic3r_version = 2.3.0-alpha0
|
||||
0.0.2 Added 0.15mm print profile
|
||||
0.0.1 Initial TriLAB bundle
|
||||
@ -1,892 +0,0 @@
|
||||
# Print profiles for the TriLAB printers
|
||||
# based on https://github.com/trilab3d/PrusaSlicer-settings/tree/master/live/TriLAB
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = TriLAB
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.0.6
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
|
||||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:DQ2]
|
||||
name = DeltiQ 2
|
||||
variants = 0.4; 0.8
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle
|
||||
|
||||
[printer_model:DQ2P]
|
||||
name = DeltiQ 2 Plus
|
||||
variants = 0.4; 0.8
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle
|
||||
|
||||
[printer_model:DQ2+FP2]
|
||||
name = DeltiQ 2 + FlexPrint 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL)
|
||||
|
||||
[printer_model:DQ2P+FP2]
|
||||
name = DeltiQ 2 Plus + FlexPrint 2
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL)
|
||||
|
||||
[printer_model:DQ2+FP]
|
||||
name = DeltiQ 2 + FlexPrint
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic;
|
||||
|
||||
[printer_model:DQ2P+FP]
|
||||
name = DeltiQ 2 Plus + FlexPrint
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ 2
|
||||
bed_model = dq2_bed.stl
|
||||
bed_texture = dq2_bed_texture.svg
|
||||
default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic
|
||||
|
||||
[printer_model:DQM]
|
||||
name = DeltiQ M
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
[printer_model:DQL]
|
||||
name = DeltiQ L
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
[printer_model:DQXL]
|
||||
name = DeltiQ XL
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = DeltiQ
|
||||
default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
[print:DeltiQ 0.20mm Normal]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 4
|
||||
bottom_solid_min_thickness = 0.7
|
||||
bridge_acceleration = 1000
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 30
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.4
|
||||
complete_objects = 0
|
||||
default_acceleration = 2000
|
||||
dont_support_bridges = 0
|
||||
draft_shield = 0
|
||||
elefant_foot_compensation = 0.2
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
external_perimeter_speed = 30
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 60
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 1000
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_acceleration = 2000
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 60
|
||||
interface_shells = 0
|
||||
ironing = 0
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.1
|
||||
ironing_speed = 15
|
||||
ironing_type = top
|
||||
layer_height = 0.2
|
||||
max_print_speed = 60
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}.gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 1500
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_speed = 45
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
seam_position = nearest
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirt_distance = 3
|
||||
skirt_height = 2
|
||||
skirts = 1
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_below_area = 70
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 30
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.1
|
||||
support_material_enforce_layers = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.35
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_extruder = 0
|
||||
support_material_interface_layers = 4
|
||||
support_material_interface_spacing = 0.4
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 40
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 0.6
|
||||
thin_walls = 0
|
||||
threads = 12
|
||||
top_fill_pattern = monotonic
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 5
|
||||
top_solid_min_thickness = 0.7
|
||||
travel_speed = 150
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_no_sparse_layers = 0
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:DeltiQ 0.10mm Normal]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
bottom_solid_layers = 7
|
||||
bottom_solid_min_thickness = 0.7
|
||||
bridge_flow_ratio = 0.7
|
||||
bridge_speed = 30
|
||||
ensure_vertical_shell_thickness = 1
|
||||
layer_height = 0.1
|
||||
first_layer_height = 0.2
|
||||
top_solid_layers = 9
|
||||
top_solid_min_thickness = 0.7
|
||||
top_infill_extrusion_width = 0.4
|
||||
fill_pattern = grid
|
||||
fill_density = 20%
|
||||
|
||||
[print:DeltiQ 0.15mm Normal]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
bottom_solid_layers = 5
|
||||
bottom_solid_min_thickness = 0.7
|
||||
bridge_flow_ratio = 0.7
|
||||
bridge_speed = 30
|
||||
ensure_vertical_shell_thickness = 1
|
||||
layer_height = 0.15
|
||||
first_layer_height = 0.2
|
||||
top_solid_layers = 7
|
||||
top_solid_min_thickness = 0.7
|
||||
fill_pattern = grid
|
||||
fill_density = 20%
|
||||
|
||||
[print:DeltiQ 0.20mm Vase]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
perimeters = 1
|
||||
top_solid_layers = 0
|
||||
fill_density = 0
|
||||
support_material = 0
|
||||
spiral_vase = 1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
thin_walls = 0
|
||||
|
||||
[print:DeltiQ 0.20mm FLEX]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
avoid_crossing_perimeters = 0
|
||||
bridge_flow_ratio = 0.80
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4
|
||||
extra_perimeters = 1
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
extrusion_width = 0.40
|
||||
overhangs = 0
|
||||
seam_position = nearest
|
||||
thin_walls = 0
|
||||
bridge_speed = 20
|
||||
external_perimeter_speed = 20
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 25
|
||||
infill_extrusion_width = 0.55
|
||||
infill_speed = 40
|
||||
infill_overlap = 27%
|
||||
perimeter_speed = 25
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 30
|
||||
solid_infill_extrusion_width = 0.45
|
||||
support_material_contact_distance = 0.3
|
||||
support_material_speed = 30
|
||||
top_solid_infill_speed = 20
|
||||
top_fill_pattern = rectilinear
|
||||
fill_pattern = grid
|
||||
fill_density = 25%
|
||||
travel_speed = 200
|
||||
max_print_speed = 40
|
||||
complete_objects = 1
|
||||
|
||||
[print:DeltiQ 0.40mm Normal @0.8 nozzle]
|
||||
inherits = DeltiQ 0.20mm Normal
|
||||
bottom_solid_layers = 3
|
||||
bottom_solid_min_thickness = 1.2
|
||||
bridge_flow_ratio = 0.90
|
||||
bridge_speed = 20
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.8
|
||||
elefant_foot_compensation = 0.2
|
||||
external_perimeter_extrusion_width = 0.80
|
||||
external_perimeter_speed = 30
|
||||
extrusion_width = 0.80
|
||||
first_layer_extrusion_width = 0.80
|
||||
first_layer_height = 0.4
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 40
|
||||
infill_extrusion_width = 0.9
|
||||
infill_overlap = 28%
|
||||
infill_speed = 60
|
||||
layer_height = 0.4
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 40
|
||||
overhangs = 1
|
||||
perimeter_extrusion_width = 0.80
|
||||
perimeter_speed = 45
|
||||
perimeters = 2
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_extrusion_width = 0.8
|
||||
solid_infill_speed = 60
|
||||
top_infill_extrusion_width = 0.8
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 1.2
|
||||
|
||||
[print:DeltiQ 0.40mm Vase @0.8 nozzle]
|
||||
inherits = DeltiQ 0.40mm Normal @0.8 nozzle
|
||||
bottom_solid_layers = 4
|
||||
perimeters = 1
|
||||
top_solid_layers = 0
|
||||
fill_density = 0
|
||||
support_material = 0
|
||||
spiral_vase = 1
|
||||
ensure_vertical_shell_thickness = 1
|
||||
thin_walls = 0
|
||||
|
||||
|
||||
[filament:*DeltiQ common*]
|
||||
compatible_printers =
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.4
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1
|
||||
filament_colour = #FF0000
|
||||
filament_diameter = 1.75
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
start_filament_gcode = "; FILAMENT_START_GCODE"
|
||||
end_filament_gcode = "; FILAMENT_END_GCODE"
|
||||
|
||||
|
||||
# DeltiQ Filaments #
|
||||
|
||||
[filament:DeltiQ - PLA - Generic]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 55
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 100
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 767
|
||||
filament_density = 1.24
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 90%
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 4.0
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 30
|
||||
filament_type = PLA
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 55
|
||||
first_layer_temperature = 220
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 215
|
||||
|
||||
[filament:DeltiQ - PETG - Generic]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 80
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = DevilDesign
|
||||
filament_cost = 480
|
||||
filament_density = 1.27
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 4.1
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 45
|
||||
filament_type = PET
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 80
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
temperature = 245
|
||||
|
||||
[filament:DeltiQ - ABS - Generic]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 100
|
||||
bridge_fan_speed = 25
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 774
|
||||
filament_density = 1.08
|
||||
filament_max_volumetric_speed = 4
|
||||
filament_retract_before_travel = 3
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 1
|
||||
filament_retract_length = 4.1
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 25
|
||||
filament_type = ABS
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 255
|
||||
max_fan_speed = 15
|
||||
min_fan_speed = 5
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 15
|
||||
temperature = 255
|
||||
|
||||
[filament:DeltiQ - PLA - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ - PLA - Generic
|
||||
|
||||
[filament:DeltiQ - PETG (Devil Design)]
|
||||
inherits = DeltiQ - PETG - Generic
|
||||
|
||||
[filament:DeltiQ - ABS - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ - ABS - Generic
|
||||
|
||||
[filament:DeltiQ - ASA - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ - ABS - Generic
|
||||
filament_density = 1.07
|
||||
filament_type = ASA
|
||||
filament_vendor = Fillamentum
|
||||
first_layer_temperature = 265
|
||||
temperature = 265
|
||||
|
||||
[filament:DeltiQ - CPE - HG100 (Fillamentum)]
|
||||
inherits = *DeltiQ common*
|
||||
bed_temperature = 90
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 1214
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = 25
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 4.3
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_speed = 45
|
||||
filament_type = CPE
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 265
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
temperature = 260
|
||||
|
||||
[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle]
|
||||
inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
|
||||
disable_fan_first_layers = 1
|
||||
filament_max_volumetric_speed = 40
|
||||
first_layer_temperature = 230
|
||||
slowdown_below_layer_time = 8
|
||||
temperature = 230
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 4.1
|
||||
filament_retract_speed = 45
|
||||
filament_deretract_speed = 25
|
||||
|
||||
[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle]
|
||||
inherits = DeltiQ - PETG (Devil Design)
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
|
||||
filament_max_volumetric_speed = 40
|
||||
first_layer_temperature = 240
|
||||
slowdown_below_layer_time = 8
|
||||
temperature = 240
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 4.3
|
||||
filament_retract_speed = 45
|
||||
filament_deretract_speed = 25
|
||||
filament_retract_before_wipe = 80%
|
||||
filament_wipe = 1
|
||||
|
||||
|
||||
# DeltiQ FlexPrint Filaments #
|
||||
|
||||
[filament:DeltiQ FP - PLA - Generic]
|
||||
inherits = DeltiQ - PLA - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 28
|
||||
|
||||
[filament:DeltiQ FP - PETG - Generic]
|
||||
inherits = DeltiQ - PETG - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FP - ABS - Generic]
|
||||
inherits = DeltiQ - ABS - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FP - FLEX - Generic]
|
||||
inherits = *DeltiQ common*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
extrusion_multiplier = 1.07
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Generic
|
||||
filament_cost = 1870
|
||||
filament_density = 1.22
|
||||
filament_deretract_speed = nil
|
||||
filament_max_volumetric_speed = 0.7
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 2.5
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = 20
|
||||
filament_type = FLEX
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 5
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 240
|
||||
|
||||
[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ FP - PLA - Generic
|
||||
|
||||
[filament:DeltiQ FP - PETG (Devil Design)]
|
||||
inherits = DeltiQ FP - PETG - Generic
|
||||
|
||||
[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ FP - ABS - Generic
|
||||
|
||||
[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ - ASA - ExtraFill (Fillamentum)
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FP - CPE - HG100 (Fillamentum)]
|
||||
inherits = DeltiQ - CPE - HG100 (Fillamentum)
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.7
|
||||
filament_retract_speed = 25
|
||||
filament_deretract_speed = 0
|
||||
filament_retract_before_wipe = 0%
|
||||
|
||||
|
||||
# DeltiQ FlexPrint 2 Filaments #
|
||||
|
||||
[filament:DeltiQ FP2 - PLA - Generic]
|
||||
inherits = DeltiQ FP - PLA - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 1.2
|
||||
filament_retract_speed = 28
|
||||
|
||||
[filament:DeltiQ FP2 - PETG - Generic]
|
||||
inherits = DeltiQ FP - PETG - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 1.4
|
||||
filament_retract_speed = 35
|
||||
filament_retract_before_wipe = 0%
|
||||
|
||||
[filament:DeltiQ FP2 - ABS - Generic]
|
||||
inherits = DeltiQ FP - ABS - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.8
|
||||
filament_retract_speed = 25
|
||||
|
||||
[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ FP2 - PLA - Generic
|
||||
|
||||
[filament:DeltiQ FP2 - PETG (Devil Design)]
|
||||
inherits = DeltiQ FP2 - PETG - Generic
|
||||
|
||||
[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ FP2 - ABS - Generic
|
||||
|
||||
[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)]
|
||||
inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum)
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
|
||||
|
||||
[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)]
|
||||
inherits = DeltiQ FP - CPE - HG100 (Fillamentum)
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
|
||||
filament_retract_length = 0.8
|
||||
filament_retract_speed = 35
|
||||
filament_deretract_speed = 0
|
||||
filament_retract_before_wipe = 0%
|
||||
|
||||
[filament:DeltiQ FP2 - FLEX - Generic]
|
||||
inherits = DeltiQ FP - FLEX - Generic
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
extrusion_multiplier = 1.07
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 1870
|
||||
filament_density = 1.22
|
||||
filament_deretract_speed = nil
|
||||
filament_max_volumetric_speed = 2.9
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 2.5
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = 20
|
||||
filament_type = FLEX
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 225
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 5
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 225
|
||||
|
||||
[filament:DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)]
|
||||
inherits = DeltiQ FP2 - FLEX - Generic
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 1
|
||||
extrusion_multiplier = 1.10
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 20
|
||||
filament_vendor = Fillamentum
|
||||
filament_cost = 1870
|
||||
filament_density = 1.22
|
||||
filament_deretract_speed = nil
|
||||
filament_max_volumetric_speed = 2.9
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 2.5
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = 20
|
||||
filament_type = TPU92A
|
||||
filament_wipe = 1
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 5
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 230
|
||||
|
||||
[filament:DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)]
|
||||
inherits = DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)
|
||||
extrusion_multiplier = 1.10
|
||||
filament_cost = 1870
|
||||
filament_density = 1.23
|
||||
filament_deretract_speed = nil
|
||||
filament_max_volumetric_speed = 2.9
|
||||
filament_retract_before_wipe = 70%
|
||||
filament_retract_length = 2.5
|
||||
filament_retract_speed = 20
|
||||
filament_type = TPU98A
|
||||
|
||||
[filament:DeltiQ FP2 - TPU 93A (SMARTFIL)]
|
||||
inherits = DeltiQ FP2 - FLEX - Generic
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.00
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 10
|
||||
filament_vendor = Smartfil
|
||||
filament_cost = 1209
|
||||
filament_density = 1.21
|
||||
filament_deretract_speed = nil
|
||||
filament_max_volumetric_speed = 2.5
|
||||
filament_retract_before_travel = 2
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = 0
|
||||
filament_retract_length = 2.9
|
||||
filament_retract_lift = 0.2
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = 35
|
||||
filament_type = TPU93A
|
||||
filament_wipe = 0
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 235
|
||||
max_fan_speed = 70
|
||||
min_fan_speed = 30
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 4
|
||||
temperature = 235
|
||||
|
||||
|
||||
# DeltiQ Printer #
|
||||
|
||||
[printer:*DeltiQ*]
|
||||
inherits =
|
||||
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]
|
||||
between_objects_gcode =
|
||||
cooling_tube_length = 5
|
||||
cooling_tube_retraction = 91.5
|
||||
default_filament_profile = "DeltiQ PLA"
|
||||
default_print_profile = DeltiQ 0.20mm Normal
|
||||
deretract_speed = 0
|
||||
end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning
|
||||
extra_loading_move = -2
|
||||
extruder_colour = #FF0000
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = repetier
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
|
||||
max_layer_height = 0.25
|
||||
max_print_height = 320
|
||||
min_layer_height = 0.15
|
||||
nozzle_diameter = 0.4
|
||||
parking_pos_retraction = 92
|
||||
printer_model =
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL
|
||||
printer_settings_id =
|
||||
printer_variant =
|
||||
printer_vendor = TriLAB Group s.r.o.
|
||||
remaining_times = 0
|
||||
retract_before_travel = 3
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 4.0
|
||||
retract_length_toolchange = 10
|
||||
retract_lift = 0.2
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 319
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 30
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 0
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
[printer:DeltiQ L]
|
||||
inherits = *DeltiQ*
|
||||
printer_model = DQL
|
||||
printer_variant = 0.4
|
||||
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ M]
|
||||
inherits = *DeltiQ*
|
||||
printer_variant = 0.4
|
||||
bed_shape = 89.507x9.40756,88.0333x18.7121,85.5951x27.8115,82.2191x36.6063,77.9423x45,72.8115x52.9007,66.883x60.2218,60.2218x66.883,52.9007x72.8115,45x77.9423,36.6063x82.2191,27.8115x85.5951,18.7121x88.0333,9.40756x89.507,2.54949e-014x90,-9.40756x89.507,-18.7121x88.0333,-27.8115x85.5951,-36.6063x82.2191,-45x77.9423,-52.9007x72.8115,-60.2218x66.883,-66.883x60.2218,-72.8115x52.9007,-77.9423x45,-82.2191x36.6063,-85.5951x27.8115,-88.0333x18.7121,-89.507x9.40756,-90x5.09899e-014,-89.507x-9.40756,-88.0333x-18.7121,-85.5951x-27.8115,-82.2191x-36.6063,-77.9423x-45,-72.8115x-52.9007,-66.883x-60.2218,-60.2218x-66.883,-52.9007x-72.8115,-45x-77.9423,-36.6063x-82.2191,-27.8115x-85.5951,-18.7121x-88.0333,-9.40756x-89.507,-1.65327e-014x-90,9.40756x-89.507,18.7121x-88.0333,27.8115x-85.5951,36.6063x-82.2191,45x-77.9423,52.9007x-72.8115,60.2218x-66.883,66.883x-60.2218,72.8115x-52.9007,77.9423x-45,82.2191x-36.6063,85.5951x-27.8115,88.0333x-18.7121,89.507x-9.40756,90x-1.0198e-013
|
||||
max_print_height = 230
|
||||
printer_model = DQM
|
||||
retract_length = 3.7
|
||||
retract_length_toolchange = 10
|
||||
retract_speed = 30
|
||||
start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
|
||||
|
||||
[printer:DeltiQ XL]
|
||||
inherits = *DeltiQ*
|
||||
printer_model = DQXL
|
||||
printer_variant = 0.4
|
||||
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
|
||||
max_print_height = 500
|
||||
retract_length = 4.5
|
||||
retract_speed = 35
|
||||
|
||||
[printer:*DeltiQ 2*]
|
||||
inherits = *DeltiQ*
|
||||
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
|
||||
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
|
||||
gcode_flavor = reprap
|
||||
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
pause_print_gcode = M0
|
||||
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
|
||||
|
||||
[printer:DeltiQ 2]
|
||||
inherits = *DeltiQ 2*
|
||||
printer_model = DQ2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ 2 - 0.8 nozzle]
|
||||
inherits = DeltiQ 2
|
||||
printer_variant = 0.8
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.4
|
||||
nozzle_diameter = 0.8
|
||||
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
|
||||
default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle
|
||||
|
||||
[printer:DeltiQ 2 Plus]
|
||||
inherits = *DeltiQ 2*
|
||||
printer_model = DQ2P
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
[printer:DeltiQ 2 Plus - 0.8 nozzle]
|
||||
inherits = DeltiQ 2 Plus
|
||||
printer_variant = 0.8
|
||||
max_layer_height = 0.4
|
||||
min_layer_height = 0.4
|
||||
nozzle_diameter = 0.8
|
||||
default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
|
||||
default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle
|
||||
|
||||
[printer:*DeltiQ 2 FlexPrint*]
|
||||
inherits = *DeltiQ 2*
|
||||
start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
|
||||
default_print_profile = DeltiQ 0.20mm FLEX
|
||||
default_filament_profile = "DeltiQ FP2 - FLEX - Generic"
|
||||
retract_length = 0.7
|
||||
retract_speed = 25
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1
|
||||
|
||||
[printer:DeltiQ 2 + FlexPrint]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
printer_model = DQ2+FP
|
||||
printer_variant = 0.4
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ 2 Plus + FlexPrint]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
printer_model = DQ2P+FP
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
[printer:*DeltiQ 2 FlexPrint 2*]
|
||||
inherits = *DeltiQ 2 FlexPrint*
|
||||
default_filament_profile = "DeltiQ FP2 - FLEX - Generic"
|
||||
retract_length = 0.8
|
||||
retract_speed = 25
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2
|
||||
|
||||
[printer:DeltiQ 2 + FlexPrint 2]
|
||||
inherits = *DeltiQ 2 FlexPrint 2*
|
||||
printer_model = DQ2+FP2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 320
|
||||
|
||||
[printer:DeltiQ 2 Plus + FlexPrint 2]
|
||||
inherits = *DeltiQ 2 FlexPrint 2*
|
||||
printer_model = DQ2P+FP2
|
||||
printer_variant = 0.4
|
||||
max_print_height = 500
|
||||
|
||||
|
||||
[presets]
|
||||
print = DeltiQ 0.20mm Normal
|
||||
printer = DeltiQ 2
|
||||
filament = DeltiQ - PLA - Generic
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 34 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 36 KiB |
Some files were not shown because too many files have changed in this diff Show More
Loading…
x
Reference in New Issue
Block a user