diff --git a/resources/profiles/Basic.ini b/resources/profiles/Basic.ini
new file mode 100644
index 000000000..2a1a1cbb2
--- /dev/null
+++ b/resources/profiles/Basic.ini
@@ -0,0 +1,558 @@
+# Print profiles for a basic FDM printer
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Custom
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the Slic3r configuration to be downgraded.
+config_version = 0.1.0
+# Where to get the updates from?
+config_update_url = 
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+#TODO: One day we may differentiate variants of the nozzles / hot ends,
+#for example by the melt zone size, or whether the nozzle is hardened.
+# Printer model name will be shown by the installation wizard.
+[printer_model:Custom175]
+name = Custom 1.75mm
+variants = 0.15; 0.2; 0.25; 0.3; 0.35; 0.4; 0.5; 0.6; 0.8; 1.0; 1.2;
+
+[printer_model:Custom250]
+name = Custom 2.5mm
+variants = 0.15; 0.2; 0.25; 0.3; 0.35; 0.4; 0.5; 0.6; 0.8; 1.0; 1.2;
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+[printer:*common*]
+end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X205 Y1\nG1 X200 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_offset = 0x0
+gcode_flavor = marlin
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+pressure_advance = 0
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.5
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 9999
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; ENDER3 firmware may only supports the old M204 format\nG28 W ; home all\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X150.0 E20  F1000.0 ; intro line\nG92 E0.0
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+bed_shape = 0x0,200x0,200x200,0x200
+max_print_height = 200
+printer_model = Basic
+default_filament_profile = PLA
+
+
+[printer:*0.15nozzle*]
+nozzle_diameter = 0.15
+max_layer_height = 0.12
+min_layer_height = 0.05
+printer_variant = 0.15
+default_print_profile = 0.05mm
+
+[printer:*0.2nozzle*]
+nozzle_diameter = 0.2
+max_layer_height = 0.16
+min_layer_height = 0.05
+printer_variant = 0.2
+default_print_profile = 0.1mm
+
+[printer:*0.25nozzle*]
+nozzle_diameter = 0.25
+max_layer_height = 0.2
+min_layer_height = 0.05
+printer_variant = 0.25
+default_print_profile = 0.1mm
+
+[printer:*0.3nozzle*]
+nozzle_diameter = 0.3
+max_layer_height = 0.25
+min_layer_height = 0.05
+printer_variant = 0.3
+default_print_profile = 0.15mm
+
+[printer:*0.35nozzle*]
+nozzle_diameter = 0.35
+max_layer_height = 0.25
+min_layer_height = 0.05
+printer_variant = 0.35
+default_print_profile = 0.15mm
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.3
+min_layer_height = 0.075
+printer_variant = 0.4
+default_print_profile = 0.2mm
+
+[printer:*0.5nozzle*]
+nozzle_diameter = 0.5
+max_layer_height = 0.4
+min_layer_height = 0.075
+printer_variant = 0.5
+default_print_profile = 0.2mm
+
+[printer:*0.6nozzle*]
+nozzle_diameter = 0.6
+max_layer_height = 0.5
+min_layer_height = 0.1
+printer_variant = 0.6
+default_print_profile = 0.3mm
+
+[printer:*0.8nozzle*]
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.1
+printer_variant = 0.8
+default_print_profile = 0.3mm
+
+[printer:*1.0nozzle*]
+nozzle_diameter = 1.0
+max_layer_height = 0.8
+min_layer_height = 0.15
+printer_variant = 1.0
+default_print_profile = 0.5mm
+
+[printer:*1.2nozzle*]
+nozzle_diameter = 1.2
+max_layer_height = 1.0
+min_layer_height = 0.2
+printer_variant = 1.0
+default_print_profile = 0.5mm
+
+[printer:Basic 0.15 nozzle]
+inherits = *common*; *0.15nozzle*
+
+[printer:Basic 0.2 nozzle]
+inherits = *common*; *0.2nozzle*
+
+[printer:Basic 0.25 nozzle]
+inherits = *common*; *0.25nozzle*
+
+[printer:Basic 0.3 nozzle]
+inherits = *common*; *0.3nozzle*
+
+[printer:Basic 0.4 nozzle]
+inherits = *common*; *0.4nozzle*
+
+[printer:Basic 0.5 nozzle]
+inherits = *common*; *0.5nozzle*
+
+[printer:Basic 0.6 nozzle]
+inherits = *common*; *0.6nozzle*
+
+[printer:Basic 0.8 nozzle]
+inherits = *common*; *0.8nozzle*
+
+[printer:Basic 1.0 nozzle]
+inherits = *common*; *1.0nozzle*
+
+[printer:Basic 1.2 nozzle]
+inherits = *common*; *1.2nozzle*
+
+
+# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
+# All other print presets will derive from the *common* print preset.
+[print:*common*]
+avoid_crossing_perimeters = 1
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+over_bridge_flow_ratio = 1.05
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+top_fill_pattern = smooth
+bottom_fill_pattern = concentricgapfill
+external_perimeters_first = 0
+extra_perimeters = 0
+only_one_perimeter_top = 1
+elefant_foot_compensation = -0.01
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+fill_angle = 45
+fill_density = 13%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 130%
+first_layer_height = 50%
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+hole_size_compensation = -0.03
+infill_acceleration = 1000
+infill_dense = 1
+infill_dense_algo = automatic
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_not_connected = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+interface_shells = 0
+label_printed_objects = 1
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+perimeters = 2
+perimeter_acceleration = 800
+perimeter_extruder = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = hidden
+skirts = 0
+skirt_distance = 2
+skirt_height = 3
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 1
+thin_walls_min_width = 100%
+top_solid_infill_speed = 40
+travel_speed = 180
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+external_perimeter_extrusion_width = 105%
+first_layer_extrusion_width = 130%
+infill_extrusion_width = 110%
+perimeter_extrusion_width = 110%
+solid_infill_extrusion_width = 110%
+top_infill_extrusion_width = 105%
+support_material_extrusion_width = 110%
+
+[print:*0.15nozzle*]
+perimeters = 6
+infill_overlap = 40%
+
+[print:*0.2nozzle*]
+perimeters = 5
+infill_overlap = 35%
+
+[print:*0.25nozzle*]
+perimeters = 4
+infill_overlap = 30%
+
+[print:*0.3nozzle*]
+perimeters = 4
+infill_overlap = 25%
+
+[print:*0.35nozzle*]
+perimeters = 3
+infill_overlap = 25%
+
+[print:*0.4nozzle*]
+perimeters = 3
+infill_overlap = 25%
+
+[print:*0.5nozzle*]
+perimeters = 3
+infill_overlap = 20%
+
+[print:*0.6nozzle*]
+perimeters = 2
+infill_overlap = 15%
+
+[print:*0.8nozzle*]
+perimeters = 2
+infill_overlap = 15%
+
+[print:*1.0nozzle*]
+perimeters = 1
+infill_overlap = 10%
+
+[print:*1.2nozzle*]
+perimeters = 1
+infill_overlap = 10%
+
+[print:*0.08mm*]
+inherits = *common*
+bottom_solid_layers = 7
+top_solid_layers = 9
+layer_height = 0.08
+first_layer_height = 0.24
+bridge_flow_ratio = 0.7
+perimeter_acceleration = 400
+
+[print:*0.16mm*]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+layer_height = 0.16
+first_layer_height = 0.24
+bridge_flow_ratio = 0.9
+
+[print:*0.32mm*]
+inherits = *common*
+bottom_solid_layers = 3
+top_solid_layers = 4
+layer_height = 0.32
+first_layer_height = 0.24
+bridge_flow_ratio = 0.9
+
+[print:*0.48mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.48
+first_layer_height = 0.24
+bridge_flow_ratio = 0.9
+
+
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 20
+top_solid_layers = 20
+layer_height = 0.05
+
+[print:*0.1mm*]
+inherits = *common*
+bottom_solid_layers = 10
+top_solid_layers = 10
+layer_height = 0.1
+
+[print:*0.15mm*]
+inherits = *common*
+bottom_solid_layers = 6
+top_solid_layers = 7
+layer_height = 0.15
+
+[print:*0.2mm*]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+layer_height = 0.2
+
+[print:*0.3mm*]
+inherits = *common*
+bottom_solid_layers = 3
+top_solid_layers = 4
+layer_height = 0.3
+
+[print:*0.5mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.5
+
+
+[print:0.08mm DETAIL 0.2 nozzle]
+inherits = *0.08mm*; *0.2nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2
+external_perimeter_speed = 35
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:0.08mm DETAIL 0.4 nozzle]
+inherits = *0.08mm*; *0.4nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4
+
+[print:0.08mm DETAIL 0.6 nozzle]
+inherits = *0.08mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:0.08mm DETAIL 0.8 nozzle]
+inherits = *0.08mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:0.16mm NORMAL 0.2 nozzle]
+inherits = *0.16mm*; *0.2nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2
+fill_pattern = grid
+
+[print:0.16mm NORMAL 0.4 nozzle]
+inherits = *0.16mm*; *0.4nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4
+
+[print:0.16mm FINE 0.6 nozzle]
+inherits = *0.16mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+
+[print:0.16mm FINE 0.8 nozzle]
+inherits = *0.16mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+
+[print:0.32mm SPEED 0.4 nozzle]
+inherits = *0.32mm*; *0.4nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4
+fill_pattern = grid
+
+[print:0.32mm SPEED 0.6 nozzle]
+inherits = *0.32mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+fill_pattern = grid
+ 
+[print:0.32mm NORMAL 0.8 nozzle]
+inherits = *0.32mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+
+[print:0.48mm SPEED 0.6 nozzle]
+inherits = *0.48mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+
+[print:0.48mm SPEED 0.8 nozzle]
+inherits = *0.48mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+
+
+[filament:*common*]
+cooling = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_toolchange_delay = 0
+filament_cooling_moves = 4
+filament_cooling_initial_speed = 2.2
+filament_cooling_final_speed = 3.4
+filament_load_time = 0
+filament_unload_time = 0
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_minimal_purge_on_wipe_tower = 15
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+
+
+[filament:PLA Gererique]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 205
+
+[filament:PET Gererique]
+inherits = *common*
+bed_temperature = 70
+
+bridge_fan_speed = 50
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PET
+first_layer_bed_temperature =70
+first_layer_temperature = 230
+max_fan_speed = 30
+min_fan_speed = 20
+
+
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 238
+
+[filament:ABS Gererique]
+inherits = *common*
+bed_temperature = 90
+
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 238
+max_fan_speed = 0
+min_fan_speed = 0
+
+
+temperature = 238
diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini
new file mode 100644
index 000000000..14e8f4513
--- /dev/null
+++ b/resources/profiles/Creality.ini
@@ -0,0 +1,520 @@
+# Print profiles for the Creality printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Creality ENDER3 (fan-made)
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the Slic3r configuration to be downgraded.
+config_version = 0.1.0
+# Where to get the updates from?
+config_update_url = 
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+#TODO: One day we may differentiate variants of the nozzles / hot ends,
+#for example by the melt zone size, or whether the nozzle is hardened.
+# Printer model name will be shown by the installation wizard.
+[printer_model:ENDER-3]
+name = Creality ENDER-3
+variants = 0.4; 0.2; 0.6
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+[printer:*common*]
+end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X205 Y1\nG1 X200 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_offset = 0x0
+gcode_flavor = marlin
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+nozzle_diameter = 0.4
+host_type = octoprint
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 6
+retract_length_toolchange = 4
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; ENDER3 firmware may only supports the old M204 format\nG28 W ; home all\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X150.0 E20  F1000.0 ; intro line\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.32
+min_layer_height = 0.07
+printer_variant = 0.4
+default_print_profile = 0.16mm NORMAL 0.4 nozzle
+
+[printer:*0.2nozzle*]
+nozzle_diameter = 0.2
+max_layer_height = 0.16
+min_layer_height = 0.05
+printer_variant = 0.2
+default_print_profile = 0.16mm NORMAL 0.2 nozzle
+
+[printer:*0.6nozzle*]
+nozzle_diameter = 0.6
+max_layer_height = 0.5
+min_layer_height = 0.1
+printer_variant = 0.6
+default_print_profile = 0.32mm NORMAL 0.6 nozzle
+
+[printer:*ENDER-3*]
+inherits = *common*
+bed_shape = 0x-10,220x-10,220x220,0x220
+max_print_height = 250
+printer_model = ENDER-3
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 500
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 25
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 5
+machine_max_jerk_e = 5
+machine_max_jerk_x = 20
+machine_max_jerk_y = 20
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+printer_notes = Fan-made creality ender-3 printer profile. Please send me a github issue if this profile need tweaking.\nPRINTER_HAS_BOWDEN
+
+
+[printer:ENDER-3 0.4 nozzle]
+inherits = *ENDER-3*; *0.4nozzle*
+nozzle_diameter = 0.4
+retract_before_travel = 0.5
+retract_length = 6
+retract_speed = 40
+default_print_profile = 0.16mm NORMAL 0.4 nozzle
+default_filament_profile = PLA
+
+[printer:ENDER-3 0.2 nozzle]
+inherits = *ENDER-3*; *0.2nozzle*
+nozzle_diameter = 0.4
+retract_before_travel = 0.5
+retract_length = 6
+retract_speed = 40
+default_print_profile = 0.16mm NORMAL 0.4 nozzle
+default_filament_profile = PLA
+
+[printer:ENDER-3 0.6 nozzle]
+inherits = *ENDER-3*; *0.6nozzle*
+nozzle_diameter = 0.4
+retract_before_travel = 0.5
+retract_length = 6
+retract_speed = 40
+default_print_profile = 0.16mm NORMAL 0.4 nozzle
+default_filament_profile = PLA
+
+
+[printer:*CR-10*]
+inherits = *common*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 250
+printer_model = CR-10
+printer_notes = Fan-made creality cr-10 printer profile. Please send me a github issue if this profile need tweaking.\nPRINTER_HAS_BOWDEN
+
+[printer:CR-10 0.2 nozzle]
+inherits = *CR-10*; *0.2nozzle*
+
+[printer:CR-10 0.4 nozzle]
+inherits = *CR-10*; *0.4nozzle*
+nozzle_diameter = 0.4
+retract_before_travel = 0.5
+retract_length = 3
+retract_speed = 40
+variable_layer_height = 0
+printer_variant = 0.4
+default_print_profile = 0.16mm NORMAL 0.4 nozzle
+
+[printer:CR-10 0.6 nozzle]
+inherits = *CR-10*; *0.6nozzle*
+retract_before_travel = 0.6
+retract_length = 2.5
+retract_speed = 25
+nozzle_diameter = 0.6
+printer_variant = 0.6
+default_print_profile = 0.16mm FINE 0.6 nozzle
+
+# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
+# All other print presets will derive from the *common* print preset.
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+over_bridge_flow_ratio = 1.1
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+top_fill_pattern = smooth
+bottom_fill_pattern = rectilinear
+external_perimeters_first = 0
+extra_perimeters = 0
+only_one_perimeter_top = 0
+elefant_foot_compensation = -0.2
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+fill_angle = 45
+fill_density = 20%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+hole_size_compensation = -0.03
+infill_acceleration = 1000
+infill_dense = 1
+infill_dense_algo = automatic
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+interface_shells = 0
+label_printed_objects = 1
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+perimeters = 2
+perimeter_acceleration = 800
+perimeter_extruder = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = hidden
+skirts = 0
+skirt_distance = 2
+skirt_height = 3
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 1
+thin_walls_min_width = 33%
+top_solid_infill_speed = 40
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.2nozzle*]
+perimeters = 4
+extrusion_width = 0.22
+external_perimeter_extrusion_width = 0.21
+first_layer_extrusion_width = 0.3
+infill_extrusion_width = 0.22
+perimeter_extrusion_width = 0.22
+solid_infill_extrusion_width = 0.22
+top_infill_extrusion_width = 0.22
+support_material_extrusion_width = 0.22
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+support_material_xy_spacing = 150%
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.4nozzle*]
+perimeters = 3
+extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.42
+first_layer_extrusion_width = 0.6
+infill_extrusion_width = 0.45
+perimeter_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.45
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+support_material_xy_spacing = 150%
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.6nozzle*]
+perimeters = 2
+extrusion_width = 0.65
+external_perimeter_extrusion_width = 0.62
+first_layer_extrusion_width = 0.9
+infill_extrusion_width = 0.65
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+top_infill_extrusion_width = 0.65
+support_material_extrusion_width = 0.65
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.2
+support_material_spacing = 1.2
+support_material_xy_spacing = 150%
+
+# Print parameters common to a 0.8mm diameter nozzle.
+[print:*0.8nozzle*]
+perimeters = 2
+extrusion_width = 0.85
+external_perimeter_extrusion_width = 0.82
+first_layer_extrusion_width = 1
+infill_extrusion_width = 0.85
+perimeter_extrusion_width = 0.85
+solid_infill_extrusion_width = 0.85
+top_infill_extrusion_width = 0.85
+
+[print:*0.08mm*]
+inherits = *common*
+bottom_solid_layers = 7
+top_solid_layers = 9
+layer_height = 0.08
+first_layer_height = 0.24
+bridge_flow_ratio = 0.7
+perimeter_acceleration = 400
+
+[print:*0.16mm*]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+layer_height = 0.16
+first_layer_height = 0.24
+bridge_flow_ratio = 0.9
+
+[print:*0.32mm*]
+inherits = *common*
+bottom_solid_layers = 3
+top_solid_layers = 4
+layer_height = 0.32
+first_layer_height = 0.24
+bridge_flow_ratio = 0.9
+
+[print:*0.48mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.48
+first_layer_height = 0.24
+bridge_flow_ratio = 0.9
+
+[print:0.08mm DETAIL 0.2 nozzle]
+inherits = *0.08mm*; *0.2nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2
+external_perimeter_speed = 35
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:0.08mm DETAIL 0.4 nozzle]
+inherits = *0.08mm*; *0.4nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4
+
+[print:0.08mm DETAIL 0.6 nozzle]
+inherits = *0.08mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:0.08mm DETAIL 0.8 nozzle]
+inherits = *0.08mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 45
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:0.16mm NORMAL 0.2 nozzle]
+inherits = *0.16mm*; *0.2nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2
+fill_pattern = grid
+
+[print:0.16mm NORMAL 0.4 nozzle]
+inherits = *0.16mm*; *0.4nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4
+
+[print:0.16mm FINE 0.6 nozzle]
+inherits = *0.16mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+
+[print:0.16mm FINE 0.8 nozzle]
+inherits = *0.16mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+
+[print:0.32mm SPEED 0.4 nozzle]
+inherits = *0.32mm*; *0.4nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4
+fill_pattern = grid
+
+[print:0.32mm SPEED 0.6 nozzle]
+inherits = *0.32mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+fill_pattern = grid
+ 
+[print:0.32mm NORMAL 0.8 nozzle]
+inherits = *0.32mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+
+[print:0.48mm SPEED 0.6 nozzle]
+inherits = *0.48mm*; *0.6nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
+
+[print:0.48mm SPEED 0.8 nozzle]
+inherits = *0.48mm*; *0.8nozzle*
+compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
+
+
+[filament:*common*]
+cooling = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_toolchange_delay = 0
+filament_cooling_moves = 4
+filament_cooling_initial_speed = 2.2
+filament_cooling_final_speed = 3.4
+filament_load_time = 0
+filament_unload_time = 0
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_minimal_purge_on_wipe_tower = 15
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+
+
+[filament:PLA Gererique]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 205
+
+[filament:PET Gererique]
+inherits = *common*
+bed_temperature = 70
+
+bridge_fan_speed = 50
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PET
+first_layer_bed_temperature =70
+first_layer_temperature = 230
+max_fan_speed = 30
+min_fan_speed = 20
+
+
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 238
+
+[filament:ABS Gererique]
+inherits = *common*
+bed_temperature = 90
+
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 238
+max_fan_speed = 0
+min_fan_speed = 0
+
+
+temperature = 238
diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
index 60f0a0499..f6c6faa7e 100644
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@@ -131,7 +131,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
-support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
@@ -191,7 +193,9 @@ support_material_extrusion_width = 0.55
 overhangs = 1
 skirts = 0
 support_material = 1
-support_material_contact_distance = 0
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0
+support_material_contact_distance_bottom = 0
 support_material_extruder = 4
 support_material_extrusion_width = 0.45
 support_material_interface_extruder = 4