supermerill
51bcae96ea
#110 remove use_bridge from infills
...
force bridge on "denser infill" layer (as it's removed from the infill now)
2019-10-29 17:00:45 +01:00
Yuri D'Elia
60d2ddde55
Fix two warnings
2019-10-14 16:34:01 +02:00
supermerill
89b2e62381
add parameters: fill_top_flow_ratio & fill_smooth_width
...
bugfix flow inaccuracies in FillSmooth.
TODO: do something about surface too small to be printed, particularly when 'only one perimeter top' -> don't extract them or use gapfill
2019-10-07 18:55:11 +02:00
supermerill
2f042e030c
Merge remote-tracking branch 'remotes/prusa/master'
...
not merged: fill.cpp, perimeter_generator, because they ahve been reworked and need to be understand fully before adding my extensive modifications.
To verify: glcanvas: maybe filament color selection is deleted (or the other one i added?)
2019-09-26 13:14:01 +02:00
bubnikv
d146a0237e
WIP: Reworked the infill generator to merge areas with the same
...
properties.
Note for Vojtech:
Review src/libslic3r/Fill/Fill.cpp once again,
add test for G-code generator properties (extrusion speed, cooling?)
Fixes Modifier slice/move efficiency #1005
2019-09-04 16:11:16 +02:00
remi
9f91aba4f9
debug gcode slice msg.
...
remove some warnings
add some test stls to use
2019-06-25 10:58:37 +02:00
supermerill
7b71d74b38
new solid infill pattern : rectilinear with gapfill.
...
* it replace rectilinear fill by gapfill when width < spacing * 1.6
* it permit to fill spaces too thin to be filled by infill (if it's not already filled by the perimeter gapfill)
* it print the gapfill after the rectilinear infill.
* the exact volume option only do his thing on the rectilinear area, not the gapfill one (as it's already done in the medial axis).
2019-04-23 13:17:45 +02:00
supermerill
41c5d32744
clipperutil.offset params go from float to double
...
As clipper used doubl anyway, it shouldn't impact anything,
just avoiding int64->float->double destructive conversion.
2019-04-08 20:10:40 +02:00
supermerill
7146471c28
bugfix "connected lines" for gyroid & 3Dhoney
2019-03-08 18:30:38 +01:00
supermerill
9454415e6d
Flags for surface_type
...
simplify the dense_infill algo. TODO: use a flag instead of the field.
TODO: use the flags (without creating bugs)
2019-02-25 18:42:37 +01:00
supermerill
cfbafe4322
Sawtooth infill : may be useful for support interface (idea by e3D)
...
add a setting to select the support interface.
need some tests to see if it works.
2019-02-21 19:12:35 +01:00
supermerill
995817f5d4
bugfix gyroid & 3Dhoneycomb "connected lines"
2019-02-12 10:56:42 +01:00
supermerill
fb0fe3ac39
ironing: cleaning code (remove duplication), streamline arguments & config struct for fill_surface_extrusion.
2019-02-11 14:42:25 +01:00
Nicholas Sherlock
bc5e299511
Add scattered rectilinear infill method for optical diffusers
2019-01-25 19:34:11 +01:00
supermerill
162132eb35
gyroid & 3Dhoneycomb: now 'connected lines' follow the perimeters
2019-01-24 11:54:48 +01:00
supermerill
a36142d258
merge complete
2018-12-19 17:14:11 +01:00
supermerill
a11db7a227
Merge tag 'mass_rename' into master_slic3rPE_PR
...
# "resolved" Conflicts:
# lib/Slic3r/GUI/Plater.pm
# lib/Slic3r/GUI/Plater/2DToolpaths.pm
# lib/Slic3r/GUI/Plater/ObjectCutDialog.pm
# lib/Slic3r/GUI/Plater/ObjectPartsPanel.pm
# lib/Slic3r/GUI/Plater/ObjectSettingsDialog.pm
# lib/Slic3r/GUI/Plater/OverrideSettingsPanel.pm
# src/libslic3r/EdgeGrid.cpp
# src/libslic3r/EdgeGrid.hpp
# src/libslic3r/ExPolygon.cpp
# src/libslic3r/ExtrusionEntity.hpp
# src/libslic3r/ExtrusionEntityCollection.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Fill/FillBase.cpp
# src/libslic3r/Flow.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode/ToolOrdering.cpp
# src/libslic3r/GCode/WipeTowerPrusaMM.cpp
# src/libslic3r/Geometry.cpp
# src/libslic3r/LayerRegion.cpp
# src/libslic3r/Model.cpp
# src/libslic3r/MultiPoint.cpp
# src/libslic3r/MultiPoint.hpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/PerimeterGenerator.hpp
# src/libslic3r/Polyline.cpp
# src/libslic3r/Polyline.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/SupportMaterial.cpp
# src/libslic3r/TriangleMesh.cpp
# src/libslic3r/TriangleMesh.hpp
# src/libslic3r/Utils.hpp
# src/libslic3r/utils.cpp
# src/slic3r/AppController.hpp
# src/slic3r/AppControllerWx.cpp
# src/slic3r/GUI/3DScene.cpp
# src/slic3r/GUI/GUI.cpp
# src/slic3r/GUI/GUI.hpp
# src/slic3r/GUI/Preset.cpp
# src/slic3r/GUI/ProgressIndicator.hpp
# src/slic3r/GUI/Tab.hpp
# xs/CMakeLists.txt
# xs/src/libslic3r/Layer.hpp
# xs/src/libslic3r/Line.cpp
# xs/src/libslic3r/Line.hpp
# xs/src/libslic3r/Point.hpp
# xs/src/libslic3r/Print.hpp
# xs/src/libslic3r/PrintRegion.cpp
# xs/src/slic3r/AppController.cpp
# xs/xsp/AppController.xsp
# xs/xsp/GUI.xsp
# xs/xsp/Print.xsp
2018-12-17 15:42:50 +01:00
bubnikv
0558b53493
WIP: Moved sources int src/, separated most of the source code from Perl.
...
The XS was left only for the unit / integration tests, and it links
libslic3r only. No wxWidgets are allowed to be used from Perl starting
from now.
2018-09-19 11:02:24 +02:00
