config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
As a preparation for PrusaSlicer 2.4.0, the new firmware_flavor
"marlinfirmware" (signifying Marlin 2.0 and newer) that is not
supported by 2.3.2 yet will default to "marlin" (signifying legacy
Marlin).
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
The issue was handling of the special "default_filament_profile" vector,
which is not being normalized in length to the number of extruders,
as this vector is being shown to the user at the Printer dependencies page,
and we don't want to present empty fields there, if the default filament
profile was not defined in the system preset.
Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
2) Activating the physical_printer_settings_id when loading from 3MF, AMF, GCode.
The physical printer is only activated if it references the printer_settings_id
loaded from the same file.
3) When loading the presets from 3MF, AMF, GCode, the "external" profiles
are no more created for profiles which differ from the local profiles
the loaded profiles reference. Instead, the referenced profile is activated
and modified with the loaded preset. If the referenced profile does not
exist, but the profile refers to a system profile with the "inherits"
fileds, the system profile is loaded and modified instead.
This works for all profiles with the exception of multi-extruder
printer with multiple filament profiles modified. In that case
the first modified filament profile will be loaded as modified,
while the other modified profiles will be loaded as "external".
This should fix
Physical printer + 3mf file, wrong preset used to generate gcode #5178
and possibly
https://github.com/prusa3d/PrusaSlicer/issues/5272
+ Fixed translation for the "Extruder n" category on the Printer Settings Tab
+ Fixed a crash, when scrolling inside Search imGui with some localization (e.t. Russion)
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
with the following refactorings:
1) Removed the "printhost_slug" config from the Printer config
and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"
Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
host configuration. Vojtech believes that this should not happen
after the host configuration is converted to physical printers.
Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.
Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
Renamed login/password/authorization_type to printhost_user/printhost_password/printhost_authorization_type.
Added initialization of physical printer preset with default values.
