supermerill
e1e4f34f0a
remove some warnings change some scale/unscale for better types.
2021-09-06 19:58:53 +02:00
supermerill
8d5688a751
Merge remote-tracking branch 'remotes/prusa/master' : Opengl crash
2020-11-28 18:18:32 +01:00
Vojtech Bubnik
3e54c0b775
Gyroid infill: Lowered the threshold to drop infill line segments.
2020-11-25 14:56:11 +01:00
supermerill
7a10e8220c
Fill "connect" update
...
* re-add the 2.2 algo
* allow to choose connection method also for solid/top/bottom
2020-11-23 23:26:47 +01:00
supermerill
1a19b023f0
Merge remote-tracking branch 'remotes/prusa/master'
...
note: new infill connect, maybe a good idea to get the previous one in case it's better (no useless lines)
note2: fillline overextrude, tofix
2020-11-23 00:28:47 +01:00
Vojtech Bubnik
8d1e13fccd
Anchoring of sparse infills can now be disabled.
2020-11-20 13:36:58 +01:00
Vojtech Bubnik
db05f00860
Fixing compilation issues.
2020-11-16 13:11:58 +01:00
Vojtech Bubnik
812cbade4d
Fills:
...
1) New algorithm for connecting along the perimeters is now applied
to Honeycomb, Hilbert and similar planar filling curves.
2) The old expensive path chaining is not applied if the new algorithm
to connect along the perimeter lines is called afterwards.
2020-11-16 12:51:51 +01:00
supermerill
7560c7d955
fix fill
...
also protect spacing in case of.
2020-10-26 15:47:21 +01:00
supermerill
6fdd615b6e
Merge remote-tracking branch 'remotes/prusa/master' into dev
2020-10-18 00:27:32 +02:00
supermerill
d6d4fc7764
Merge branch 'master' into dev
2020-10-01 00:09:04 +02:00
supermerill
fc1ec534ad
fix min/max value for config: now double, not int
...
fix some wrning
2020-09-24 16:49:04 +02:00
supermerill
89ec89e682
#393 don't connect now differentiate with holes & outer perimeters
...
but it works only for half of rectilinear2: because it go over a new polyline start always from the same direction.
So it needs a difficult to do change to rectilinear2. (TODO)
2020-09-21 23:12:02 +02:00
Lukas Matena
c70b34b6c8
Fixed several warnings
...
The biggest difference is changing PresetCollection::m_idx_selected from int to size_t, which fixed many warnings at once.
2020-03-03 15:47:02 +01:00
supermerill
9e2b819880
fix fill (override keyword added to avoid this bug in the future)
2019-12-12 14:31:40 +01:00
supermerill
805e0b91b8
merge wip
2019-12-11 12:03:27 +01:00
supermerill
dda438c74b
Merge commit '5e3e5492487690fb48cd7c4bb0b7e0e019e30a5c' (wip)
2019-12-05 20:53:02 +01:00
bubnikv
afa72da9d1
Fix of infill connecting along perimeter lines,
...
new 3-opt iterative improvement of infill path (currently disabled,
it is extremely slow)
2019-12-02 15:01:52 +01:00
bubnikv
8c377c6585
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-11-14 17:02:46 +01:00
bubnikv
dd59945098
Fix of a typo in KDTreeIndirect.
...
Improvement of the infill path planning.
Regression fix of Gyroid infill crashes.
Some unit tests for elephant foot and path planning.
2019-11-14 17:02:32 +01:00
Enrico Turri
0c4507141a
Attempt to fix Mac build on buildserver
2019-11-12 13:19:17 +01:00
bubnikv
f2dd49a905
Merged pull request "Gyroid improvements" #2730
...
by @supermerill and @wavexx
WIP: The function Fill::connect_infill() is being rewritten
to utilize spatial structures wherever possible for lower CPU load
and less dynamic memory allocation.
2019-11-07 14:28:30 +01:00
Yuri D'Elia
49cabd465a
Make Gyroid::PatternTolerance match the description
...
Move the division out of the switch in order to make the tolerance match
the expected unit.
2019-10-14 16:33:50 +02:00
Yuri D'Elia
b82c9c3b5f
Move gyroid constants to the class declaration
2019-10-14 16:33:38 +02:00
Yuri D'Elia
dffbde0cca
Maximize gyroid printing speed angle
...
Counter-rotate the default angle by 45' so that gyroid is kept at it's
maximum printing speed by default.
2019-10-14 16:33:19 +02:00
Yuri D'Elia
73f8ffe76a
Limit upper tolerance in Gyroid
...
Do not reduce resolution more than necessary when using larger nozzles
and/or higher layer heights.
2019-10-14 16:32:49 +02:00
Yuri D'Elia
d8732ecfcd
Allow gyroid pattern rotation over Z
2019-10-14 16:32:42 +02:00
Yuri D'Elia
02b0bd757a
Handle truncated gyroid patterns correctly
...
When generating patterns which are less than a full wave, always
generate the last point correctly.
When extending a full wave to a line, fixup the last point
to the real gyroid position instead of shifting the point.
2019-10-14 16:32:37 +02:00
Yuri D'Elia
d783759abb
Reduce reallocations and memory usage in gyroid
2019-10-14 16:32:28 +02:00
Yuri D'Elia
ee242072d1
Parametric tolerance for Gyroid infill
2019-10-14 16:32:13 +02:00
bubnikv
331c187b39
Rest of the path chaining has been replaced with the new algorithm.
...
PolylineCollection.cpp/hpp was removed, use Polylines instead.
Various first_point() / last_point() now return references, not copies.
2019-09-27 18:17:21 +02:00
bubnikv
e65ab90c16
Fix of G-code path planning: Infill lines were incorrectly ordered
...
for islands with another islands in their holes.
Improvement of chaining of infill lines for 3D honeycomb, Gyroid and
Honeycomb infill: New TSP chaining algorithm is used.
2019-09-27 09:51:07 +02:00
Yuri D'Elia
753b34a0d3
Make Gyroid::PatternTolerance match the description
...
Move the division out of the switch in order to make the tolerance match
the expected unit.
2019-08-08 16:53:26 +02:00
Yuri D'Elia
90c85b7c8a
Move gyroid constants to the class declaration
2019-08-07 22:26:39 +02:00
Yuri D'Elia
da6c285f1f
Maximize gyroid printing speed angle
...
Counter-rotate the default angle by 45' so that gyroid is kept at it's
maximum printing speed by default.
2019-08-07 22:26:39 +02:00
Yuri D'Elia
f8490fb4e0
Limit upper tolerance in Gyroid
...
Do not reduce resolution more than necessary when using larger nozzles
and/or higher layer heights.
2019-08-07 16:47:23 +02:00
Yuri D'Elia
1a84642153
Allow gyroid pattern rotation over Z
2019-08-07 16:47:17 +02:00
Yuri D'Elia
e7616efc89
Handle truncated gyroid patterns correctly
...
When generating patterns which are less than a full wave, always
generate the last point correctly.
When extending a full wave to a line, fixup the last point
to the real gyroid position instead of shifting the point.
2019-08-07 16:47:04 +02:00
Yuri D'Elia
5932881291
Reduce reallocations and memory usage in gyroid
2019-08-07 16:46:56 +02:00
Yuri D'Elia
b9901f1730
Parametric tolerance for Gyroid infill
2019-08-07 16:46:51 +02:00
supermerill
b6936a46e3
bugfix "connected lines" for gyroid & 3Dhoney
2019-08-07 16:45:52 +02:00
supermerill
86fbb9a095
gyroid & 3Dhoneycomb: now 'connected lines' follow the perimeters
2019-08-07 16:45:22 +02:00
supermerill
7146471c28
bugfix "connected lines" for gyroid & 3Dhoney
2019-03-08 18:30:38 +01:00
supermerill
162132eb35
gyroid & 3Dhoneycomb: now 'connected lines' follow the perimeters
2019-01-24 11:54:48 +01:00
supermerill
a11db7a227
Merge tag 'mass_rename' into master_slic3rPE_PR
...
# "resolved" Conflicts:
# lib/Slic3r/GUI/Plater.pm
# lib/Slic3r/GUI/Plater/2DToolpaths.pm
# lib/Slic3r/GUI/Plater/ObjectCutDialog.pm
# lib/Slic3r/GUI/Plater/ObjectPartsPanel.pm
# lib/Slic3r/GUI/Plater/ObjectSettingsDialog.pm
# lib/Slic3r/GUI/Plater/OverrideSettingsPanel.pm
# src/libslic3r/EdgeGrid.cpp
# src/libslic3r/EdgeGrid.hpp
# src/libslic3r/ExPolygon.cpp
# src/libslic3r/ExtrusionEntity.hpp
# src/libslic3r/ExtrusionEntityCollection.hpp
# src/libslic3r/Fill/Fill.cpp
# src/libslic3r/Fill/FillBase.cpp
# src/libslic3r/Flow.cpp
# src/libslic3r/GCode.cpp
# src/libslic3r/GCode/ToolOrdering.cpp
# src/libslic3r/GCode/WipeTowerPrusaMM.cpp
# src/libslic3r/Geometry.cpp
# src/libslic3r/LayerRegion.cpp
# src/libslic3r/Model.cpp
# src/libslic3r/MultiPoint.cpp
# src/libslic3r/MultiPoint.hpp
# src/libslic3r/PerimeterGenerator.cpp
# src/libslic3r/PerimeterGenerator.hpp
# src/libslic3r/Polyline.cpp
# src/libslic3r/Polyline.hpp
# src/libslic3r/Print.cpp
# src/libslic3r/PrintConfig.cpp
# src/libslic3r/PrintConfig.hpp
# src/libslic3r/PrintObject.cpp
# src/libslic3r/SupportMaterial.cpp
# src/libslic3r/TriangleMesh.cpp
# src/libslic3r/TriangleMesh.hpp
# src/libslic3r/Utils.hpp
# src/libslic3r/utils.cpp
# src/slic3r/AppController.hpp
# src/slic3r/AppControllerWx.cpp
# src/slic3r/GUI/3DScene.cpp
# src/slic3r/GUI/GUI.cpp
# src/slic3r/GUI/GUI.hpp
# src/slic3r/GUI/Preset.cpp
# src/slic3r/GUI/ProgressIndicator.hpp
# src/slic3r/GUI/Tab.hpp
# xs/CMakeLists.txt
# xs/src/libslic3r/Layer.hpp
# xs/src/libslic3r/Line.cpp
# xs/src/libslic3r/Line.hpp
# xs/src/libslic3r/Point.hpp
# xs/src/libslic3r/Print.hpp
# xs/src/libslic3r/PrintRegion.cpp
# xs/src/slic3r/AppController.cpp
# xs/xsp/AppController.xsp
# xs/xsp/GUI.xsp
# xs/xsp/Print.xsp
2018-12-17 15:42:50 +01:00
bubnikv
52db7b055a
WIP: Merged commits from stable between 1.41.2-beta and 1.42.2 final.
...
Changes in SupportMaterial.cpp, TriangleMesh.cpp and 01_trianglemesh.t
are yet to be merged.
WIP: Refactoring of layer height editing.
Removed layer_height_ranges from PrintObject, as the Print/PrintObject
now hold their copies of Model/ModelObject.
2018-12-11 16:33:43 +01:00
bubnikv
0558b53493
WIP: Moved sources int src/, separated most of the source code from Perl.
...
The XS was left only for the unit / integration tests, and it links
libslic3r only. No wxWidgets are allowed to be used from Perl starting
from now.
2018-09-19 11:02:24 +02:00