- add a spacing_ratio in flow, but it's only sed for two spacing in perimeter_generator, not sure about the usefulness of it.
- external_perimeter_overlap now use the spacing_ratio to compute
- add perimeter_overlap, using the spacing_ratio to compute
- add perimeter_bonding, that shrink the external-internal spacing, without growing the infill polygons.
better import of 'elephant foot' (spelled elefant in prusa) that is now first_layer_size_compensation, using 'legacy to amke the convert.
advantage: it reverse the sign now.
drawback : no easy export to prusa.
Adds a new setting and plumbs through the UI to independently control
the fan speed for external perimeters. Filed as issue #2776.
merill note: i only picked the setting definition, as the other part will need an almost compete re-write
- now has a setting & a threshold
- when reverse_direction trigger on the external loop, it also trigger for all other loops on this side (so, no more U-turn)
- do not depends on extra_perimeter anymore
- now extra_perimeters split into extra_perimeters (the old useless one) and extra_perimeters_overhangs
- reordering settings in the tab.
also some merge for creality printers, and fix some problem in it.
relax the min/max version for the profile, i don't have the resource to check & modify these for each release.
Also some option to only apply to hole (or others)
Also some fixes to some loops options in the codepath.
also a test to thin walls, suspected a bug but can't find it.
1) When the wizard is initialized, filament and SLA profile names
are verified and current names of renamed profiles are resolved.
Fixes "Add/Remove Filaments is not hiding all of the un-checked filaments #3835"
2) When adding a printer model, default materials are installed in case
the printer model has no default material installed.
3) When leaving the Filaments or SLA materials page, and some printer models
have no material installed, those Printer Models are listed
in a message box and only for those printer models the default
materials are installed.
This reverts commit 3d3e36ba8d22d3654fb6adb451dae9f0eb6cf818.
The change is too risky just before the PrusaSlicer 2.2.0 final release
and the feature may need a bit of polishing before release.
the "renamed_from" property of current profiles was not taken into account.
This lead to a situation where there were no MMU or SLA materials installed
after upgrade from PrusaSlicer 2.2.1 to 2.2. This should work now.
and the "show incompatible profiles" option.
It was not able to select the incompatible Print profile, which is
possible now.
(see Cannot select incompatible printer profile #3715)
When the Printer profile derived from the Prusa3D system profile was
active or a system Prusa3D profile was active, and when the Print profile
with the removed "inherits" field was active (or any other profile
derived from the "-- default --" profile was active), then the filament
selector offered just the profiles with the removed "inherits" field
(or any other profile derived from the "-- default--") profile.
This behavior has been now changed, so that in this scenario the Filament selector
will offer the Prusa3D vendor profiles compatible with the active Print
and Printer profile as well as the user profiles.
Slicer was also changed to keep an incompatible preset selected
at its respective tab if its respective "Red flag" is enabled.
For example, if an incompatible Print preset is selected and a Printer
profile is switched to another one which is not compatible with the active
Print preset that was red already, the active Print preset is
not switched if the Print "Red flag" is active. However, if the Print profile
was compatible before the Printer profile is switched and now the Print
profile becomes incompatible, another compatible Print profile is selected.
A likely bug in wxWidgets was worked around when switching a Print preset
on Plater, if the last item in the Print preset was active and incompatible,
and another Print preset was selected by the user. On Windows, an CBN_EDITCHANGE
is sent just after combo box selection change event and the CBN_EDITCHANGE
holds an index of the combo box item, which will be removed by the 1st event,
therefore leading to an assert in wxWidgets on CBN_EDITCHANGE. The workaround
is to disable processing of CBN_EDITCHANGE on Windows for the Plater
preset selection combo boxes.
Opening saved project removes Print Host settings #3655
Octoprint Settings when Opening a .3MF file #3244
When loading a configuration file (from AMF, 3MF, .ini or .gcode),
and if the host settings ("print_host", "printhost_apikey", "printhost_cafile")
in the configuration file is empty, then the config is considered to be anonymized,
and these anonymized keys are loaded from the referenced "derived from" profile,
if it exists in user's PrusaSlicer configuration directory.
We are aware that this is a patch work and a better long term solution
is to separate physical printer settings from logical printer settings,
but this is a good enough solution for PrusaSlicer 2.2.0 release.
