Joseph Lenox b54c02908b Add tests to check if apply_config invaldiates existing steps for perimeter count and infill.

2018-07-11 22:14:51 -05:00

..

adaptive_slicing.t

Removed factor 4 from layer height gradation, don't apply min/max layer height limitation after gradation. Fixes #4235 (#4241)

2017-12-21 10:39:47 -06:00

adaptive_width.t

Restored/updated the tests about adaptive extrusion width

2017-04-07 22:15:18 +02:00

angles.t

…

arcs.t

…

avoid_crossing_perimeters.t

…

bridges.t

Detect bridge direction also when lower slices have narrow gaps. #3929

2017-05-10 23:21:22 +02:00

clean_polylines.t

…

clipper.t

…

collinear.t

…

combineinfill.t

…

config.t

Add tests to check if apply_config invaldiates existing steps for perimeter count and infill.

2018-07-11 22:14:51 -05:00

cooling.t

…

custom_gcode.t

New customizable G-code to be added between objects when using sequential printing. (by @lordofhyphens) #3264 #3275

2017-04-04 18:51:06 +02:00

fill.t

Refactoring: moved Fill::adjust_solid_spacing() to Flow::solid_spacing().

2017-04-02 17:14:07 +02:00

flow.t

…

gaps.t

…

gcode.t

…

geometry.t

Fix for undetected convex points. #3458

2017-05-01 17:00:02 +02:00

layers.t

…

loops.t

Update and restore t/loops.t

2017-04-08 10:57:16 +02:00

multi.t

Bugfix: first_layer_temperature was ignored by ooze_prevention for first layer skirt/brim. #3964

2017-05-21 16:34:19 +02:00

perimeters.t

Partial implementation #1405: minimum shell thickness option (#3885)

2018-05-22 19:25:02 -04:00

polyclip.t

…

pressure.t

…

print.t

…

retraction.t

Bugfix: some lifts were skipped when retract_lift == layer_height and retract_layer_change = yes. #3904

2017-04-29 10:38:00 +02:00

shells.t

Fixed tests broken by the spiral vase change

2017-03-17 18:53:13 +01:00

skirt_brim.t

Print the brim using the support material extruder if we have a raft. #2957

2017-03-13 23:47:52 +01:00

slice.t

…

speed.t

Bugfix: percent first layer speed was not applied over autospeed. #2945

2017-03-04 14:23:03 +01:00

support.t

New configuration for support material interface extrusion width (#4086)

2017-10-21 17:16:49 -05:00

svg.t

…

thin.t

…

threads.t

…

vibrationlimit.t

…