Fix typos found using codespell

Eigen/src/Core/Solve.h

@@ -181,7 +181,7 @@ struct Assignment<DstXprType, Solve<CwiseUnaryOp<internal::scalar_conjugate_op<t
   }
 };
 
-} // end namepsace internal
+} // end namespace internal
 
 } // end namespace Eigen
 

Eigen/src/Core/products/Parallelizer.h

@@ -91,7 +91,7 @@ void parallelize_gemm(const Functor& func, Index rows, Index cols, Index depth,
   // FIXME the transpose variable is only needed to properly split
   // the matrix product when multithreading is enabled. This is a temporary
   // fix to support row-major destination matrices. This whole
-  // parallelizer mechanism has to be redisigned anyway.
+  // parallelizer mechanism has to be redesigned anyway.
   EIGEN_UNUSED_VARIABLE(depth);
   EIGEN_UNUSED_VARIABLE(transpose);
   func(0,rows, 0,cols);

Eigen/src/IterativeLinearSolvers/SolveWithGuess.h

@@ -108,7 +108,7 @@ struct Assignment<DstXprType, SolveWithGuess<DecType,RhsType,GuessType>, interna
   }
 };
 
-} // end namepsace internal
+} // end namespace internal
 
 } // end namespace Eigen
 

Eigen/src/SparseCholesky/SimplicialCholesky_impl.h

@@ -5,7 +5,7 @@
 
 /*
 
-NOTE: thes functions vave been adapted from the LDL library:
+NOTE: these functions have been adapted from the LDL library:
 
 LDL Copyright (c) 2005 by Timothy A. Davis.  All Rights Reserved.
 

test/indexed_view.cpp

@@ -140,7 +140,7 @@ void check_indexed_view()
     "500  501  502  503  504  505  506  507  508  509")
   );
 
-  // takes the row numer 3, and repeat it 5 times
+  // take row number 3, and repeat it 5 times
   VERIFY( MATCH( A(seqN(3,5,0), all),
     "300  301  302  303  304  305  306  307  308  309\n"
     "300  301  302  303  304  305  306  307  308  309\n"

unsupported/Eigen/CXX11/src/Tensor/README.md

@@ -581,7 +581,7 @@ is not initialized.
 
 Creates a tensor mapping an existing array of data. The data must not be freed
 until the TensorMap is discarded, and the size of the data must be large enough
-to accomodate of the coefficients of the tensor.
+to accommodate the coefficients of the tensor.
 
     float data[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11};
     Eigen::TensorMap<Tensor<float, 2>> a(data, 3, 4);

unsupported/Eigen/CXX11/src/Tensor/Tensor.h

@@ -48,7 +48,7 @@ namespace Eigen {
   *
   * <dl>
   * <dt><b>Relation to other parts of Eigen:</b></dt>
-  * <dd>The midterm developement goal for this class is to have a similar hierarchy as Eigen uses for matrices, so that
+  * <dd>The midterm development goal for this class is to have a similar hierarchy as Eigen uses for matrices, so that
   * taking blocks or using tensors in expressions is easily possible, including an interface with the vector/matrix code
   * by providing .asMatrix() and .asVector() (or similar) methods for rank 2 and 1 tensors. However, currently, the %Tensor
   * class does not provide any of these features and is only available as a stand-alone class that just allows for

unsupported/Eigen/CXX11/src/Tensor/TensorBase.h

@@ -20,7 +20,7 @@ namespace Eigen {
   * \brief The tensor base class.
   *
   * This class is the common parent of the Tensor and TensorMap class, thus
-  * making it possible to use either class interchangably in expressions.
+  * making it possible to use either class interchangeably in expressions.
   */
 
 template<typename Derived>

unsupported/Eigen/CXX11/src/Tensor/TensorContractionBlocking.h

@@ -75,7 +75,7 @@ class TensorXsmmContractionBlocking {
       outer_n_ = outer_n_ != 0 ? outer_n_ : n;
     }
 #else
-    // Defaults, possibly overriden per-platform.
+    // Defaults, possibly overridden per-platform.
     copyA_ = true;
     copyB_ = false;
 

unsupported/Eigen/CXX11/src/Tensor/TensorContractionThreadPool.h

@@ -350,7 +350,7 @@ struct TensorEvaluator<const TensorContractionOp<Indices, LeftArgType, RightArgT
         // Normal number of notifications for k slice switch is
         // nm_ + nn_ + nm_ * nn_. However, first P - 1 slices will receive only
         // nm_ + nn_ notifications, because they will not receive notifications
-        // from preceeding kernels.
+        // from preceding kernels.
         state_switch_[x] =
             x == 0
                 ? 1
@@ -530,7 +530,7 @@ struct TensorEvaluator<const TensorContractionOp<Indices, LeftArgType, RightArgT
 
     void kernel(Index m, Index n, Index k) {
       // Note: order of iteration matters here. Iteration over m is innermost
-      // because we want to reuse the same packed rhs in consequetive tasks
+      // because we want to reuse the same packed rhs in consecutive tasks
       // (rhs fits into L2$ while lhs only into L3$).
       const Index nend = n * gn_ + gn(n);
       const Index mend = m * gm_ + gm(m);

unsupported/Eigen/CXX11/src/Tensor/TensorCostModel.h

@@ -195,7 +195,7 @@ class TensorCostModel {
     // 11 is L2 cache latency on Haswell.
     // We don't know whether data is in L1, L2 or L3. But we are most interested
     // in single-threaded computational time around 100us-10ms (smaller time
-    // is too small for parallelization, larger time is not intersting
+    // is too small for parallelization, larger time is not interesting
     // either because we are probably using all available threads already).
     // And for the target time range, L2 seems to be what matters. Data set
     // fitting into L1 is too small to take noticeable time. Data set fitting

unsupported/Eigen/CXX11/src/Tensor/TensorDeviceSycl.h

@@ -286,7 +286,7 @@ m_queue(cl::sycl::queue(s, [&](cl::sycl::exception_list l) {
     tileSize =static_cast<Index>(m_queue.get_device(). template get_info<cl::sycl::info::device::max_work_group_size>());
     auto s=  m_queue.get_device().template get_info<cl::sycl::info::device::vendor>();
     std::transform(s.begin(), s.end(), s.begin(), ::tolower);
-    if(m_queue.get_device().is_cpu()){ // intel doesnot allow to use max workgroup size
+    if(m_queue.get_device().is_cpu()){ // intel doesn't allow to use max workgroup size
       tileSize=std::min(static_cast<Index>(256), static_cast<Index>(tileSize));
     }
     rng = n;
@@ -303,7 +303,7 @@ m_queue(cl::sycl::queue(s, [&](cl::sycl::exception_list l) {
   template<typename Index>
   EIGEN_STRONG_INLINE void parallel_for_setup(Index dim0, Index dim1, Index &tileSize0, Index &tileSize1, Index &rng0, Index &rng1, Index &GRange0, Index &GRange1)  const {
     Index max_workgroup_Size = static_cast<Index>(maxSyclThreadsPerBlock());
-    if(m_queue.get_device().is_cpu()){ // intel doesnot allow to use max workgroup size
+    if(m_queue.get_device().is_cpu()){ // intel doesn't allow to use max workgroup size
       max_workgroup_Size=std::min(static_cast<Index>(256), static_cast<Index>(max_workgroup_Size));
     }
     Index pow_of_2 = static_cast<Index>(std::log2(max_workgroup_Size));
@@ -331,7 +331,7 @@ m_queue(cl::sycl::queue(s, [&](cl::sycl::exception_list l) {
   template<typename Index>
   EIGEN_STRONG_INLINE void parallel_for_setup(Index dim0, Index dim1,Index dim2, Index &tileSize0, Index &tileSize1, Index &tileSize2, Index &rng0, Index &rng1, Index &rng2, Index &GRange0, Index &GRange1, Index &GRange2)  const {
     Index max_workgroup_Size = static_cast<Index>(maxSyclThreadsPerBlock());
-    if(m_queue.get_device().is_cpu()){ // intel doesnot allow to use max workgroup size
+    if(m_queue.get_device().is_cpu()){ // intel doesn't allow to use max workgroup size
       max_workgroup_Size=std::min(static_cast<Index>(256), static_cast<Index>(max_workgroup_Size));
     }
     Index pow_of_2 = static_cast<Index>(std::log2(max_workgroup_Size));
@@ -377,7 +377,7 @@ m_queue(cl::sycl::queue(s, [&](cl::sycl::exception_list l) {
   EIGEN_STRONG_INLINE int majorDeviceVersion() const { return 1; }
 
   EIGEN_STRONG_INLINE unsigned long maxSyclThreadsPerMultiProcessor() const {
-    // OpenCL doesnot have such concept
+    // OpenCL doesn't have such concept
     return 2;
   }
 
@@ -519,7 +519,7 @@ struct SyclDevice {
     return m_queue_stream->maxSyclThreadsPerBlock();
   }
   EIGEN_STRONG_INLINE unsigned long maxSyclThreadsPerMultiProcessor() const {
-    // OpenCL doesnot have such concept
+    // OpenCL doesn't have such concept
     return m_queue_stream->maxSyclThreadsPerMultiProcessor();
   //  return stream_->deviceProperties().maxThreadsPerMultiProcessor;
   }
@@ -544,7 +544,7 @@ struct SyclDevice {
 };
 // This is used as a distingushable device inside the kernel as the sycl device class is not Standard layout.
 // This is internal and must not be used by user. This dummy device allow us to specialise the tensor evaluator
-// inside the kenrel. So we can have two types of eval for host and device. This is required for TensorArgMax operation
+// inside the kernel. So we can have two types of eval for host and device. This is required for TensorArgMax operation
 struct SyclKernelDevice:DefaultDevice{};
 
 }  // end namespace Eigen

unsupported/Eigen/CXX11/src/Tensor/TensorFFT.h

@@ -274,7 +274,7 @@ struct TensorEvaluator<const TensorFFTOp<FFT, ArgType, FFTResultType, FFTDir>, D
           }
         }
 
-        // processs the line
+        // process the line
         if (is_power_of_two) {
           processDataLineCooleyTukey(line_buf, line_len, log_len);
         }

unsupported/Eigen/CXX11/src/Tensor/TensorForwardDeclarations.h

@@ -12,7 +12,7 @@
 
 namespace Eigen {
 
-// MakePointer class is used as a container of the adress space of the pointer
+// MakePointer class is used as a container of the address space of the pointer
 // on the host and on the device. From the host side it generates the T* pointer
 // and when EIGEN_USE_SYCL is used it construct a buffer with a map_allocator to
 // T* m_data on the host. It is always called on the device.

unsupported/Eigen/CXX11/src/Tensor/TensorImagePatch.h

@@ -272,8 +272,8 @@ struct TensorEvaluator<const TensorImagePatchOp<Rows, Cols, ArgType>, Device>
           break;
         default:
           eigen_assert(false && "unexpected padding");
-          m_outputCols=0; // silence the uninitialised warnig;
+          m_outputCols=0; // silence the uninitialised warning;
-          m_outputRows=0; //// silence the uninitialised warnig;
+          m_outputRows=0; //// silence the uninitialised warning;
       }
     }
     eigen_assert(m_outputRows > 0);

unsupported/Eigen/CXX11/src/Tensor/TensorIntDiv.h

@@ -167,7 +167,7 @@ struct TensorIntDivisor {
     shift2 = log_div > 1 ? log_div-1 : 0;
   }
 
-  // Must have 0 <= numerator. On platforms that dont support the __uint128_t
+  // Must have 0 <= numerator. On platforms that don't support the __uint128_t
   // type numerator should also be less than 2^32-1.
   EIGEN_DEVICE_FUNC EIGEN_STRONG_INLINE T divide(const T numerator) const {
     eigen_assert(static_cast<typename UnsignedTraits<T>::type>(numerator) < NumTraits<UnsignedType>::highest()/2);

unsupported/Eigen/CXX11/src/Tensor/TensorReductionSycl.h

@@ -106,7 +106,7 @@ struct FullReducer<Self, Op, const Eigen::SyclDevice, Vectorizable> {
     /// if the shared memory is less than the GRange, we set shared_mem size to the TotalSize and in this case one kernel would be created for recursion to reduce all to one.
     if (GRange < outTileSize) outTileSize=GRange;
     /// creating the shared memory for calculating reduction.
-    /// This one is used to collect all the reduced value of shared memory as we dont have global barrier on GPU. Once it is saved we can
+    /// This one is used to collect all the reduced value of shared memory as we don't have global barrier on GPU. Once it is saved we can
     /// recursively apply reduction on it in order to reduce the whole.
     auto temp_global_buffer =cl::sycl::buffer<CoeffReturnType, 1>(cl::sycl::range<1>(GRange));
     typedef typename Eigen::internal::remove_all<decltype(self.xprDims())>::type Dims;
@@ -150,7 +150,7 @@ struct InnerReducer<Self, Op, const Eigen::SyclDevice> {
 
     // getting final out buffer at the moment the created buffer is true because there is no need for assign
     /// creating the shared memory for calculating reduction.
-    /// This one is used to collect all the reduced value of shared memory as we dont have global barrier on GPU. Once it is saved we can
+    /// This one is used to collect all the reduced value of shared memory as we don't have global barrier on GPU. Once it is saved we can
     /// recursively apply reduction on it in order to reduce the whole.
       dev.parallel_for_setup(num_coeffs_to_preserve, tileSize, range, GRange);
       dev.sycl_queue().submit([&](cl::sycl::handler &cgh) {

unsupported/Eigen/CXX11/src/Tensor/TensorRef.h

@@ -31,7 +31,7 @@ class TensorLazyBaseEvaluator {
   int refCount() const { return m_refcount; }
 
  private:
-  // No copy, no assigment;
+  // No copy, no assignment;
   TensorLazyBaseEvaluator(const TensorLazyBaseEvaluator& other);
   TensorLazyBaseEvaluator& operator = (const TensorLazyBaseEvaluator& other);
 

unsupported/Eigen/CXX11/src/Tensor/TensorSyclExtractFunctors.h

@@ -117,7 +117,7 @@ SYCLEXTRFUNCTERNARY()
 
 
 
-//TensorCustomOp must be specialised otherewise it will be captured by UnaryCategory while its action is different
+//TensorCustomOp must be specialised otherwise it will be captured by UnaryCategory while its action is different
 //from the UnaryCategory and it is similar to the general FunctorExtractor.
 /// specialisation of TensorCustomOp
 #define SYCLEXTRFUNCCUSTOMUNARYOP(CVQual)\

unsupported/Eigen/CXX11/src/Tensor/TensorSyclFunctors.h

@@ -80,7 +80,7 @@ template < typename HostExpr, typename FunctorExpr, typename Tuple_of_Acc, typen
     typedef typename ConvertToDeviceExpression<const HostExpr>::Type DevExpr;
     auto device_expr = createDeviceExpression<DevExpr, PlaceHolderExpr>(functors, tuple_of_accessors);
     /// reduction cannot be captured automatically through our device conversion recursion. The reason is that reduction has two behaviour
-    /// the first behaviour is when it is used as a root to lauch the sub-kernel. The second one is when it is treated as a leafnode to pass the
+    /// the first behaviour is when it is used as a root to launch the sub-kernel. The second one is when it is treated as a leafnode to pass the
     /// calculated result to its parent kernel. While the latter is automatically detected through our device expression generator. The former is created here.
     const auto device_self_expr= Eigen::TensorReductionOp<Op, Dims, decltype(device_expr.expr) ,MakeGlobalPointer>(device_expr.expr, dims, functor);
     /// This is the evaluator for device_self_expr. This is exactly similar to the self which has been passed to run function. The difference is
@@ -121,7 +121,7 @@ class ReductionFunctor<HostExpr, FunctorExpr, Tuple_of_Acc, Dims, Eigen::interna
     typedef typename ConvertToDeviceExpression<const HostExpr>::Type DevExpr;
     auto device_expr = createDeviceExpression<DevExpr, PlaceHolderExpr>(functors, tuple_of_accessors);
     /// reduction cannot be captured automatically through our device conversion recursion. The reason is that reduction has two behaviour
-    /// the first behaviour is when it is used as a root to lauch the sub-kernel. The second one is when it is treated as a leafnode to pass the
+    /// the first behaviour is when it is used as a root to launch the sub-kernel. The second one is when it is treated as a leafnode to pass the
     /// calculated result to its parent kernel. While the latter is automatically detected through our device expression generator. The former is created here.
     const auto device_self_expr= Eigen::TensorReductionOp<Op, Dims, decltype(device_expr.expr) ,MakeGlobalPointer>(device_expr.expr, dims, functor);
     /// This is the evaluator for device_self_expr. This is exactly similar to the self which has been passed to run function. The difference is
@@ -168,7 +168,7 @@ public:
     typedef typename TensorSycl::internal::ConvertToDeviceExpression<const HostExpr>::Type DevExpr;
     auto device_expr = TensorSycl::internal::createDeviceExpression<DevExpr, PlaceHolderExpr>(functors, tuple_of_accessors);
     /// reduction cannot be captured automatically through our device conversion recursion. The reason is that reduction has two behaviour
-    /// the first behaviour is when it is used as a root to lauch the sub-kernel. The second one is when it is treated as a leafnode to pass the
+    /// the first behaviour is when it is used as a root to launch the sub-kernel. The second one is when it is treated as a leafnode to pass the
     /// calculated result to its parent kernel. While the latter is automatically detected through our device expression generator. The former is created here.
     const auto device_self_expr= Eigen::TensorReductionOp<Op, Dims, decltype(device_expr.expr) ,MakeGlobalPointer>(device_expr.expr, dims, op);
     /// This is the evaluator for device_self_expr. This is exactly similar to the self which has been passed to run function. The difference is
@@ -215,7 +215,7 @@ public:
     typedef typename TensorSycl::internal::ConvertToDeviceExpression<const HostExpr>::Type DevExpr;
     auto device_expr = TensorSycl::internal::createDeviceExpression<DevExpr, PlaceHolderExpr>(functors, tuple_of_accessors);
     /// reduction cannot be captured automatically through our device conversion recursion. The reason is that reduction has two behaviour
-    /// the first behaviour is when it is used as a root to lauch the sub-kernel. The second one is when it is treated as a leafnode to pass the
+    /// the first behaviour is when it is used as a root to launch the sub-kernel. The second one is when it is treated as a leafnode to pass the
     /// calculated result to its parent kernel. While the latter is automatically detected through our device expression generator. The former is created here.
     const auto device_self_expr= Eigen::TensorReductionOp<Op, Dims, decltype(device_expr.expr) ,MakeGlobalPointer>(device_expr.expr, dims, op);
     /// This is the evaluator for device_self_expr. This is exactly similar to the self which has been passed to run function. The difference is

unsupported/Eigen/CXX11/src/Tensor/TensorSyclTuple.h

@@ -143,7 +143,7 @@ struct IndexList {};
 /// \brief Collects internal details for generating index ranges [MIN, MAX)
 /// Declare primary template for index range builder
 /// \tparam MIN is the starting index in the tuple
-/// \tparam N represents sizeof..(elemens)- sizeof...(Is)
+/// \tparam N represents sizeof..(elements)- sizeof...(Is)
 /// \tparam Is... are the list of generated index so far
 template <size_t MIN, size_t N, size_t... Is>
 struct RangeBuilder;
@@ -161,7 +161,7 @@ struct RangeBuilder<MIN, MIN, Is...> {
 /// in this case we are recursively subtracting N by one and adding one
 /// index to Is... list until MIN==N
 /// \tparam MIN is the starting index in the tuple
-/// \tparam N represents sizeof..(elemens)- sizeof...(Is)
+/// \tparam N represents sizeof..(elements)- sizeof...(Is)
 /// \tparam Is... are the list of generated index so far
 template <size_t MIN, size_t N, size_t... Is>
 struct RangeBuilder : public RangeBuilder<MIN, N - 1, N - 1, Is...> {};

unsupported/Eigen/CXX11/src/Tensor/TensorVolumePatch.h

@@ -568,7 +568,7 @@ struct TensorEvaluator<const TensorVolumePatchOp<Planes, Rows, Cols, ArgType>, D
 
   Dimensions m_dimensions;
 
-  // Parameters passed to the costructor.
+  // Parameters passed to the constructor.
   Index m_plane_strides;
   Index m_row_strides;
   Index m_col_strides;

unsupported/Eigen/CXX11/src/TensorSymmetry/util/TemplateGroupTheory.h

@@ -241,7 +241,7 @@ struct dimino_first_step_elements
   * multiplying all elements in the given subgroup with the new
   * coset representative. Note that the first element of the
   * subgroup is always the identity element, so the first element of
-  * ther result of this template is going to be the coset
+  * the result of this template is going to be the coset
   * representative itself.
   *
   * Note that this template accepts an additional boolean parameter

unsupported/Eigen/CXX11/src/ThreadPool/EventCount.h

@@ -33,10 +33,10 @@ namespace Eigen {
 //   ec.Notify(true);
 //
 // Notify is cheap if there are no waiting threads. Prewait/CommitWait are not
-// cheap, but they are executed only if the preceeding predicate check has
+// cheap, but they are executed only if the preceding predicate check has
 // failed.
 //
-// Algorihtm outline:
+// Algorithm outline:
 // There are two main variables: predicate (managed by user) and state_.
 // Operation closely resembles Dekker mutual algorithm:
 // https://en.wikipedia.org/wiki/Dekker%27s_algorithm
@@ -79,7 +79,7 @@ class EventCount {
     uint64_t state = state_.load(std::memory_order_seq_cst);
     for (;;) {
       if (int64_t((state & kEpochMask) - epoch) < 0) {
-        // The preceeding waiter has not decided on its fate. Wait until it
+        // The preceding waiter has not decided on its fate. Wait until it
         // calls either CancelWait or CommitWait, or is notified.
         EIGEN_THREAD_YIELD();
         state = state_.load(std::memory_order_seq_cst);
@@ -110,7 +110,7 @@ class EventCount {
     uint64_t state = state_.load(std::memory_order_relaxed);
     for (;;) {
       if (int64_t((state & kEpochMask) - epoch) < 0) {
-        // The preceeding waiter has not decided on its fate. Wait until it
+        // The preceding waiter has not decided on its fate. Wait until it
         // calls either CancelWait or CommitWait, or is notified.
         EIGEN_THREAD_YIELD();
         state = state_.load(std::memory_order_relaxed);

unsupported/Eigen/CXX11/src/ThreadPool/RunQueue.h

@@ -198,7 +198,7 @@ class RunQueue {
   };
   std::mutex mutex_;
   // Low log(kSize) + 1 bits in front_ and back_ contain rolling index of
-  // front/back, repsectively. The remaining bits contain modification counters
+  // front/back, respectively. The remaining bits contain modification counters
   // that are incremented on Push operations. This allows us to (1) distinguish
   // between empty and full conditions (if we would use log(kSize) bits for
   // position, these conditions would be indistinguishable); (2) obtain

unsupported/Eigen/CXX11/src/util/EmulateArray.h

@@ -219,7 +219,7 @@ template<class T, std::size_t N> struct array_size<const array<T,N>& > {
 
 #else
 
-// The compiler supports c++11, and we're not targetting cuda: use std::array as Eigen::array
+// The compiler supports c++11, and we're not targeting cuda: use std::array as Eigen::array
 #include <array>
 namespace Eigen {
 

unsupported/Eigen/NonLinearOptimization

@@ -35,7 +35,7 @@
   * a zero for the system (Powell hybrid "dogleg" method).
   *
   * This code is a port of minpack (http://en.wikipedia.org/wiki/MINPACK).
-  * Minpack is a very famous, old, robust and well-reknown package, written in 
+  * Minpack is a very famous, old, robust and well renowned package, written in
   * fortran. Those implementations have been carefully tuned, tested, and used
   * for several decades.
   *
@@ -63,7 +63,7 @@
   * Other tests were added by myself at the very beginning of the 
   * process and check the results for levenberg-marquardt using the reference data 
   * on http://www.itl.nist.gov/div898/strd/nls/nls_main.shtml. Since then i've 
-  * carefully checked that the same results were obtained when modifiying the 
+  * carefully checked that the same results were obtained when modifying the
   * code. Please note that we do not always get the exact same decimals as they do,
   * but this is ok : they use 128bits float, and we do the tests using the C type 'double',
   * which is 64 bits on most platforms (x86 and amd64, at least).

unsupported/Eigen/OpenGLSupport

@@ -25,7 +25,7 @@ namespace Eigen {
   *
   * This module provides wrapper functions for a couple of OpenGL functions
   * which simplify the way to pass Eigen's object to openGL.
-  * Here is an exmaple:
+  * Here is an example:
   * 
   * \code
   * // You need to add path_to_eigen/unsupported to your include path.

unsupported/Eigen/src/BVH/KdBVH.h

@@ -170,7 +170,7 @@ private:
   typedef internal::vector_int_pair<Scalar, Dim> VIPair;
   typedef std::vector<VIPair, aligned_allocator<VIPair> > VIPairList;
   typedef Matrix<Scalar, Dim, 1> VectorType;
-  struct VectorComparator //compares vectors, or, more specificall, VIPairs along a particular dimension
+  struct VectorComparator //compares vectors, or more specifically, VIPairs along a particular dimension
   {
     VectorComparator(int inDim) : dim(inDim) {}
     inline bool operator()(const VIPair &v1, const VIPair &v2) const { return v1.first[dim] < v2.first[dim]; }

unsupported/Eigen/src/Eigenvalues/ArpackSelfAdjointEigenSolver.h

@@ -300,7 +300,7 @@ public:
 
   /** \brief Reports whether previous computation was successful.
    *
-   * \returns \c Success if computation was succesful, \c NoConvergence otherwise.
+   * \returns \c Success if computation was successful, \c NoConvergence otherwise.
    */
   ComputationInfo info() const
   {

unsupported/Eigen/src/EulerAngles/EulerSystem.h

@@ -12,7 +12,7 @@
 
 namespace Eigen
 {
-  // Forward declerations
+  // Forward declarations
   template <typename _Scalar, class _System>
   class EulerAngles;
   

unsupported/Eigen/src/IterativeSolvers/ConstrainedConjGrad.h

@@ -99,7 +99,7 @@ void pseudo_inverse(const CMatrix &C, CINVMatrix &CINV)
 /** \ingroup IterativeSolvers_Module
   * Constrained conjugate gradient
   *
-  * Computes the minimum of \f$ 1/2((Ax).x) - bx \f$ under the contraint \f$ Cx \le f \f$
+  * Computes the minimum of \f$ 1/2((Ax).x) - bx \f$ under the constraint \f$ Cx \le f \f$
   */
 template<typename TMatrix, typename CMatrix,
          typename VectorX, typename VectorB, typename VectorF>

unsupported/Eigen/src/IterativeSolvers/DGMRES.h

@@ -214,7 +214,7 @@ class DGMRES : public IterativeSolverBase<DGMRES<_MatrixType,_Preconditioner> >
     void dgmresInitDeflation(Index& rows) const; 
     mutable DenseMatrix m_V; // Krylov basis vectors
     mutable DenseMatrix m_H; // Hessenberg matrix 
-    mutable DenseMatrix m_Hes; // Initial hessenberg matrix wihout Givens rotations applied
+    mutable DenseMatrix m_Hes; // Initial hessenberg matrix without Givens rotations applied
     mutable Index m_restart; // Maximum size of the Krylov subspace
     mutable DenseMatrix m_U; // Vectors that form the basis of the invariant subspace 
     mutable DenseMatrix m_MU; // matrix operator applied to m_U (for next cycles)
@@ -250,7 +250,7 @@ void DGMRES<_MatrixType, _Preconditioner>::dgmres(const MatrixType& mat,const Rh
   m_H.resize(m_restart+1, m_restart);
   m_Hes.resize(m_restart, m_restart);
   m_V.resize(n,m_restart+1);
-  //Initial residual vector and intial norm
+  //Initial residual vector and initial norm
   x = precond.solve(x);
   r0 = rhs - mat * x; 
   RealScalar beta = r0.norm(); 

unsupported/Eigen/src/LevenbergMarquardt/LMqrsolv.h

@@ -73,7 +73,7 @@ void lmqrsolv(
             qtbpj = -givens.s() * wa[k] + givens.c() * qtbpj;
             wa[k] = temp;
 
-            /*           accumulate the tranformation in the row of s. */
+            /*           accumulate the transformation in the row of s. */
             for (i = k+1; i<n; ++i) {
                 temp = givens.c() * s(i,k) + givens.s() * sdiag[i];
                 sdiag[i] = -givens.s() * s(i,k) + givens.c() * sdiag[i];

unsupported/Eigen/src/LevenbergMarquardt/LevenbergMarquardt.h

@@ -233,9 +233,9 @@ class LevenbergMarquardt : internal::no_assignment_operator
     
     /** 
      * \brief Reports whether the minimization was successful
-     * \returns \c Success if the minimization was succesful,
+     * \returns \c Success if the minimization was successful,
      *         \c NumericalIssue if a numerical problem arises during the 
-     *          minimization process, for exemple during the QR factorization
+     *          minimization process, for example during the QR factorization
      *         \c NoConvergence if the minimization did not converge after 
      *          the maximum number of function evaluation allowed
      *          \c InvalidInput if the input matrix is invalid

unsupported/Eigen/src/MatrixFunctions/MatrixExponential.h

@@ -313,7 +313,7 @@ struct matrix_exp_computeUV<MatrixType, long double>
       matrix_exp_pade17(A, U, V);
     }
   
-#elif LDBL_MANT_DIG <= 112  // quadruple precison
+#elif LDBL_MANT_DIG <= 112  // quadruple precision
   
     if (l1norm < 1.639394610288918690547467954466970e-005L) {
       matrix_exp_pade3(arg, U, V);

unsupported/Eigen/src/MatrixFunctions/MatrixPower.h

@@ -81,7 +81,7 @@ class MatrixPowerParenthesesReturnValue : public ReturnByValue< MatrixPowerParen
  *
  * \note Currently this class is only used by MatrixPower. One may
  * insist that this be nested into MatrixPower. This class is here to
- * faciliate future development of triangular matrix functions.
+ * facilitate future development of triangular matrix functions.
  */
 template<typename MatrixType>
 class MatrixPowerAtomic : internal::noncopyable

unsupported/Eigen/src/NonLinearOptimization/qrsolv.h

@@ -61,7 +61,7 @@ void qrsolv(
             qtbpj = -givens.s() * wa[k] + givens.c() * qtbpj;
             wa[k] = temp;
 
-            /*           accumulate the tranformation in the row of s. */
+            /*           accumulate the transformation in the row of s. */
             for (i = k+1; i<n; ++i) {
                 temp = givens.c() * s(i,k) + givens.s() * sdiag[i];
                 sdiag[i] = -givens.s() * s(i,k) + givens.c() * sdiag[i];

unsupported/Eigen/src/NonLinearOptimization/r1updt.h

@@ -22,7 +22,7 @@ void r1updt(
     Scalar temp;
     JacobiRotation<Scalar> givens;
 
-    // r1updt had a broader usecase, but we dont use it here. And, more
+    // r1updt had a broader usecase, but we don't use it here. And, more
     // importantly, we can not test it.
     eigen_assert(m==n);
     eigen_assert(u.size()==m);

unsupported/Eigen/src/Polynomials/Companion.h

@@ -104,7 +104,7 @@ class companion
     /** Helper function for the balancing algorithm.
      * \returns true if the row and the column, having colNorm and rowNorm
      * as norms, are balanced, false otherwise.
-     * colB and rowB are repectively the multipliers for
+     * colB and rowB are respectively the multipliers for
      * the column and the row in order to balance them.
      * */
     bool balanced( RealScalar colNorm, RealScalar rowNorm,
@@ -113,7 +113,7 @@ class companion
     /** Helper function for the balancing algorithm.
      * \returns true if the row and the column, having colNorm and rowNorm
      * as norms, are balanced, false otherwise.
-     * colB and rowB are repectively the multipliers for
+     * colB and rowB are respectively the multipliers for
      * the column and the row in order to balance them.
      * */
     bool balancedR( RealScalar colNorm, RealScalar rowNorm,

unsupported/Eigen/src/Skyline/SkylineInplaceLU.h

@@ -41,7 +41,7 @@ public:
 
     /** Sets the relative threshold value used to prune zero coefficients during the decomposition.
      *
-     * Setting a value greater than zero speeds up computation, and yields to an imcomplete
+     * Setting a value greater than zero speeds up computation, and yields to an incomplete
      * factorization with fewer non zero coefficients. Such approximate factors are especially
      * useful to initialize an iterative solver.
      *

unsupported/Eigen/src/Skyline/SkylineMatrix.h

@@ -206,26 +206,26 @@ public:
             if (col > row) //upper matrix
             {
                 const Index minOuterIndex = inner - m_data.upperProfile(inner);
-                eigen_assert(outer >= minOuterIndex && "you try to acces a coeff that do not exist in the storage");
+                eigen_assert(outer >= minOuterIndex && "You tried to access a coeff that does not exist in the storage");
                 return this->m_data.upper(m_colStartIndex[inner] + outer - (inner - m_data.upperProfile(inner)));
             }
             if (col < row) //lower matrix
             {
                 const Index minInnerIndex = outer - m_data.lowerProfile(outer);
-                eigen_assert(inner >= minInnerIndex && "you try to acces a coeff that do not exist in the storage");
+                eigen_assert(inner >= minInnerIndex && "You tried to access a coeff that does not exist in the storage");
                 return this->m_data.lower(m_rowStartIndex[outer] + inner - (outer - m_data.lowerProfile(outer)));
             }
         } else {
             if (outer > inner) //upper matrix
             {
                 const Index maxOuterIndex = inner + m_data.upperProfile(inner);
-                eigen_assert(outer <= maxOuterIndex && "you try to acces a coeff that do not exist in the storage");
+                eigen_assert(outer <= maxOuterIndex && "You tried to access a coeff that does not exist in the storage");
                 return this->m_data.upper(m_colStartIndex[inner] + (outer - inner));
             }
             if (outer < inner) //lower matrix
             {
                 const Index maxInnerIndex = outer + m_data.lowerProfile(outer);
-                eigen_assert(inner <= maxInnerIndex && "you try to acces a coeff that do not exist in the storage");
+                eigen_assert(inner <= maxInnerIndex && "You tried to access a coeff that does not exist in the storage");
                 return this->m_data.lower(m_rowStartIndex[outer] + (inner - outer));
             }
         }
@@ -300,11 +300,11 @@ public:
 
         if (IsRowMajor) {
             const Index minInnerIndex = outer - m_data.lowerProfile(outer);
-            eigen_assert(inner >= minInnerIndex && "you try to acces a coeff that do not exist in the storage");
+            eigen_assert(inner >= minInnerIndex && "You tried to access a coeff that does not exist in the storage");
             return this->m_data.lower(m_rowStartIndex[outer] + inner - (outer - m_data.lowerProfile(outer)));
         } else {
             const Index maxInnerIndex = outer + m_data.lowerProfile(outer);
-            eigen_assert(inner <= maxInnerIndex && "you try to acces a coeff that do not exist in the storage");
+            eigen_assert(inner <= maxInnerIndex && "You tried to access a coeff that does not exist in the storage");
             return this->m_data.lower(m_rowStartIndex[outer] + (inner - outer));
         }
     }
@@ -336,11 +336,11 @@ public:
 
         if (IsRowMajor) {
             const Index minOuterIndex = inner - m_data.upperProfile(inner);
-            eigen_assert(outer >= minOuterIndex && "you try to acces a coeff that do not exist in the storage");
+            eigen_assert(outer >= minOuterIndex && "You tried to access a coeff that does not exist in the storage");
             return this->m_data.upper(m_colStartIndex[inner] + outer - (inner - m_data.upperProfile(inner)));
         } else {
             const Index maxOuterIndex = inner + m_data.upperProfile(inner);
-            eigen_assert(outer <= maxOuterIndex && "you try to acces a coeff that do not exist in the storage");
+            eigen_assert(outer <= maxOuterIndex && "You tried to access a coeff that does not exist in the storage");
             return this->m_data.upper(m_colStartIndex[inner] + (outer - inner));
         }
     }

unsupported/Eigen/src/SparseExtra/DynamicSparseMatrix.h

@@ -187,7 +187,7 @@ template<typename _Scalar, int _Options, typename _StorageIndex>
     /** Does nothing: provided for compatibility with SparseMatrix */
     inline void finalize() {}
 
-    /** Suppress all nonzeros which are smaller than \a reference under the tolerence \a epsilon */
+    /** Suppress all nonzeros which are smaller than \a reference under the tolerance \a epsilon */
     void prune(Scalar reference, RealScalar epsilon = NumTraits<RealScalar>::dummy_precision())
     {
       for (Index j=0; j<outerSize(); ++j)
@@ -224,21 +224,21 @@ template<typename _Scalar, int _Options, typename _StorageIndex>
       }
     }
 
-    /** The class DynamicSparseMatrix is deprectaed */
+    /** The class DynamicSparseMatrix is deprecated */
     EIGEN_DEPRECATED inline DynamicSparseMatrix()
       : m_innerSize(0), m_data(0)
     {
       eigen_assert(innerSize()==0 && outerSize()==0);
     }
 
-    /** The class DynamicSparseMatrix is deprectaed */
+    /** The class DynamicSparseMatrix is deprecated */
     EIGEN_DEPRECATED inline DynamicSparseMatrix(Index rows, Index cols)
       : m_innerSize(0)
     {
       resize(rows, cols);
     }
 
-    /** The class DynamicSparseMatrix is deprectaed */
+    /** The class DynamicSparseMatrix is deprecated */
     template<typename OtherDerived>
     EIGEN_DEPRECATED explicit inline DynamicSparseMatrix(const SparseMatrixBase<OtherDerived>& other)
       : m_innerSize(0)

unsupported/Eigen/src/SparseExtra/MarketIO.h

@@ -104,7 +104,7 @@ namespace internal
     out << value.real << " " << value.imag()<< "\n"; 
   }
 
-} // end namepsace internal
+} // end namespace internal
 
 inline bool getMarketHeader(const std::string& filename, int& sym, bool& iscomplex, bool& isvector)
 {

unsupported/Eigen/src/Splines/SplineFitting.h

@@ -181,7 +181,7 @@ namespace Eigen
    * \ingroup Splines_Module
    *
    * \param[in] pts The data points to which a spline should be fit.
-   * \param[out] chord_lengths The resulting chord lenggth vector.
+   * \param[out] chord_lengths The resulting chord length vector.
    *
    * \sa Les Piegl and Wayne Tiller, The NURBS book (2nd ed.), 1997, 9.2.1 Global Curve Interpolation to Point Data
    **/   

unsupported/README.txt

@@ -20,7 +20,7 @@ However, it:
  - must rely on Eigen,
  - must be highly related to math,
  - should have some general purpose in the sense that it could
-   potentially become an offical Eigen module (or be merged into another one).
+   potentially become an official Eigen module (or be merged into another one).
 
 In doubt feel free to contact us. For instance, if your addons is very too specific
 but it shows an interesting way of using Eigen, then it could be a nice demo.

unsupported/bench/bench_svd.cpp

@@ -70,7 +70,7 @@ void bench_svd(const MatrixType& a = MatrixType())
   std::cout<< std::endl;
   timerJacobi.reset();
   timerBDC.reset();
-  cout << " Computes rotaion matrix" <<endl;
+  cout << " Computes rotation matrix" <<endl;
   for (int k=1; k<=NUMBER_SAMPLE; ++k)
   {
     timerBDC.start();

unsupported/test/CMakeLists.txt

@@ -1,5 +1,5 @@
 # generate split test header file only if it does not yet exist
-# in order to prevent a rebuild everytime cmake is configured
+# in order to prevent a rebuild every time cmake is configured
 if(NOT EXISTS ${CMAKE_CURRENT_BINARY_DIR}/split_test_helper.h)
   file(WRITE ${CMAKE_CURRENT_BINARY_DIR}/split_test_helper.h "")
   foreach(i RANGE 1 999)

unsupported/test/autodiff_scalar.cpp

@@ -81,7 +81,7 @@ void check_limits_specialization()
   typedef std::numeric_limits<AD> A;
   typedef std::numeric_limits<Scalar> B;
 
-  // workaround "unsed typedef" warning:
+  // workaround "unused typedef" warning:
   VERIFY(!bool(internal::is_same<B, A>::value));
 
 #if EIGEN_HAS_CXX11

unsupported/test/cxx11_tensor_inflation_sycl.cpp

@@ -22,10 +22,10 @@
 
 using Eigen::Tensor;
 
-// Inflation Defenition for each dimention the inflated val would be
+// Inflation Definition for each dimension the inflated val would be
 //((dim-1)*strid[dim] +1)
 
-// for 1 dimnention vector of size 3 with value (4,4,4) with the inflated stride value of 3 would be changed to
+// for 1 dimension vector of size 3 with value (4,4,4) with the inflated stride value of 3 would be changed to
 // tensor of size (2*3) +1 = 7 with the value of
 // (4, 0, 0, 4, 0, 0, 4).
 

unsupported/test/cxx11_tensor_of_float16_cuda.cu

@@ -247,7 +247,7 @@ void test_cuda_trancendental() {
   }
   for (int i = 0; i < num_elem; ++i) {
     std::cout << "Checking elemwise log " << i << " input = " << input2(i) << " full = " << full_prec2(i) << " half = " << half_prec2(i) << std::endl;
-    if(std::abs(input2(i)-1.f)<0.05f) // log lacks accurary nearby 1
+    if(std::abs(input2(i)-1.f)<0.05f) // log lacks accuracy nearby 1
       VERIFY_IS_APPROX(full_prec2(i)+Eigen::half(0.1f), half_prec2(i)+Eigen::half(0.1f));
     else
       VERIFY_IS_APPROX(full_prec2(i), half_prec2(i));

unsupported/test/cxx11_tensor_random_cuda.cu

@@ -37,7 +37,7 @@ void test_cuda_random_uniform()
   assert(cudaMemcpyAsync(out.data(), d_out, out_bytes, cudaMemcpyDeviceToHost, gpu_device.stream()) == cudaSuccess);
   assert(cudaStreamSynchronize(gpu_device.stream()) == cudaSuccess);
 
-  // For now we just check thes code doesn't crash.
+  // For now we just check this code doesn't crash.
   // TODO: come up with a valid test of randomness
 }
 

unsupported/test/forward_adolc.cpp

@@ -132,7 +132,7 @@ void test_forward_adolc()
   }
 
   {
-    // simple instanciation tests
+    // simple instantiation tests
     Matrix<adtl::adouble,2,1> x;
     foo(x);
     Matrix<adtl::adouble,Dynamic,Dynamic> A(4,4);;

unsupported/test/sparse_extra.cpp

@@ -8,7 +8,7 @@
 // with this file, You can obtain one at http://mozilla.org/MPL/2.0/.
 
 
-// import basic and product tests for deprectaed DynamicSparseMatrix
+// import basic and product tests for deprecated DynamicSparseMatrix
 #define EIGEN_NO_DEPRECATED_WARNING
 #include "sparse_basic.cpp"
 #include "sparse_product.cpp"