Add geeetech M1 printer

Printing settings for the M1 machine provided by Geeetech officially.

resources/profiles/Geeetech.json

@@ -398,14 +398,14 @@
             "name": "0.16mm Optimal @Geeetech M1",
             "sub_path": "process/0.16mm Optimal @Geeetech M1.json"
         },
-        {
-            "name": "0.24mm Optimal @Geeetech M1 0.6 nozzle",
-            "sub_path": "process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json"
-        },		
         {
             "name": "0.20mm Standard @Geeetech M1",
             "sub_path": "process/0.20mm Standard @Geeetech M1.json"
         },
+        {
+            "name": "0.24mm Optimal @Geeetech M1 0.6 nozzle",
+            "sub_path": "process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json"
+        },
         {
             "name": "0.25mm Draft @Geeetech M1",
             "sub_path": "process/0.25mm Draft @Geeetech M1.json"

resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json

@@ -15,7 +15,7 @@
     "0.2"
   ],
   "extruder_type": [
-	"Direct"
+  "Direct Drive"
   ],
     "machine_max_acceleration_e": [
         "2000",
@@ -102,8 +102,8 @@
   "retract_lift_below":[
     "95"
   ],
-  "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
+  "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
-  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
   "nozzle_type": "brass",
   "auxiliary_fan": "0"
 }

resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json

@@ -15,7 +15,7 @@
     "0.4"
   ],
   "extruder_type": [
-	"Direct"
+  "Direct Drive"
   ],
     "machine_max_acceleration_e": [
         "2000",
@@ -108,8 +108,8 @@
   "retract_lift_below":[
     "95"
   ],
-  "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
+  "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
-  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
   "nozzle_type": "brass",
   "auxiliary_fan": "0"
 }

resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json

@@ -15,7 +15,7 @@
     "0.6"
   ],
   "extruder_type": [
-	"Direct"
+  "Direct Drive"
   ],
     "machine_max_acceleration_e": [
         "2000",
@@ -108,8 +108,8 @@
   "retract_lift_below":[
     "95"
   ],
-  "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
+  "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
-  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
   "nozzle_type": "brass",
   "auxiliary_fan": "0"
 }

resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json

@@ -15,7 +15,7 @@
     "0.8"
   ],
   "extruder_type": [
-	"Direct"
+  "Direct Drive"
   ],
     "machine_max_acceleration_e": [
         "2000",
@@ -108,8 +108,8 @@
   "retract_lift_below":[
     "95"
   ],
-  "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
+  "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
-  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
   "nozzle_type": "brass",
   "auxiliary_fan": "0"
 }

resources/profiles/Geeetech/machine/fdm_geeetech_common.json

@@ -138,5 +138,4 @@
     "support_multi_bed_types": "1",
     "auxiliary_fan": "0",
     "z_hop_types": "Normal Lift"
-
 }

resources/profiles/Geeetech/process/0.08mm Extra Fine @Geeetech M1.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.4 nozzle"
     ]

resources/profiles/Geeetech/process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.2 nozzle"
     ]

resources/profiles/Geeetech/process/0.10mm Fine @Geeetech M1.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.4 nozzle"
     ]

resources/profiles/Geeetech/process/0.10mm Standard @Geeetech M1 0.2 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.2 nozzle"
     ]

resources/profiles/Geeetech/process/0.12mm Draft @Geeetech M1 0.2 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.2 nozzle"
     ]

resources/profiles/Geeetech/process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.2 nozzle"
     ]

resources/profiles/Geeetech/process/0.16mm Optimal @Geeetech M1.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.4 nozzle"
     ]

resources/profiles/Geeetech/process/0.20mm Standard @Geeetech M1.json

@@ -28,6 +28,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.4 nozzle"
     ]

resources/profiles/Geeetech/process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.6 nozzle"
     ]

resources/profiles/Geeetech/process/0.25mm Draft @Geeetech M1.json

@@ -28,6 +28,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.4 nozzle"
     ]

resources/profiles/Geeetech/process/0.30mm Standard @Geeetech M1 0.6 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.6 nozzle"
     ]

resources/profiles/Geeetech/process/0.36mm Draft @Geeetech M1 0.6 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.6 nozzle"
     ]

resources/profiles/Geeetech/process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.8 nozzle"
     ]

resources/profiles/Geeetech/process/0.44mm Draft @Geeetech M1 0.8 nozzle.json

@@ -20,6 +20,13 @@
     "initial_layer_acceleration": "500",
     "top_surface_acceleration": "2000",
     "travel_acceleration": "3000",
+    "default_jerk": "10",
+    "initial_layer_jerk": "10",
+    "outer_wall_jerk": "10",
+    "infill_jerk": "10",
+    "travel_jerk": "10",
+    "inner_wall_jerk": "10",
+    "top_surface_jerk": "10",
     "compatible_printers": [
         "Geeetech M1 0.8 nozzle"
     ]