ENH: update po files for Bambu Studio

Change-Id: Ia19ab13d5b53f79cc0fa2514bc1ce8c60275d695

bbl/i18n/zh_cn/BambuStudio_zh_CN.po

@@ -7,7 +7,7 @@ msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2023-01-12 11:04+0800\n"
-"PO-Revision-Date: 2023-01-12 11:10+0800\n"
+"PO-Revision-Date: 2023-01-13 16:27+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
 "Language: zh_CN\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 3.1\n"
+"X-Generator: Poedit 3.2.2\n"
 
 msgid "Supports Painting"
 msgstr "支撑绘制"
@@ -1374,7 +1374,7 @@ msgid "Please log out and login to the printer again."
 msgstr "请先退出登录然后再重新登录打印机。"
 
 msgid "Failed uploading print file. Please enter ip address again."
-msgstr ""
+msgstr "上传打印文件失败。请重新输入IP地址。"
 
 msgid "Downloading"
 msgstr "下载中"
@@ -1633,10 +1633,10 @@ msgid "Print using materials mounted on the back of the case"
 msgstr ""
 
 msgid "Print with filaments in ams"
-msgstr ""
+msgstr "使用AMS里的材料打印"
 
 msgid "Print with filaments mounted on the back of the chassis"
-msgstr ""
+msgstr "使用机箱背后挂载的材料打印"
 
 msgid "AMS Settings"
 msgstr "AMS 设置"
@@ -2945,6 +2945,11 @@ msgid ""
 "2. The Filament presets\n"
 "3. The Printer presets"
 msgstr ""
+"想从Bambu 云同步你的个人数据吗?\n"
+"包含如下信息:\n"
+"1. 工艺预设\n"
+"2. 打印丝预设\n"
+"3. 打印机预设"
 
 msgid "Synchronization"
 msgstr "同步"
@@ -3238,7 +3243,7 @@ msgid "Still load"
 msgstr "继续进料"
 
 msgid "Please select an AMS slot before calibration"
-msgstr ""
+msgstr "请在标定前选择一个AMS槽位"
 
 msgid ""
 "Cannot read filament info: the filament is loaded to the tool head,please "
@@ -3312,24 +3317,26 @@ msgid "Skip"
 msgstr "跳过"
 
 msgid "Unable to connect printer"
-msgstr ""
+msgstr "无法连接打印机"
 
 #, c-format, boost-format
 msgid ""
 "Cannot detect the LAN IP address of %s. Are %s and Bambu Studio in the same "
 "LAN?"
 msgstr ""
+"无法检测到打印机%s 在局域网中的的IP地址。%s 和 Bambu Studio在同一个局域网内"
+"吗？"
 
 msgid ""
 "Failed to connect to the printer through LAN. Please enter the correct "
 "printer IP address and access code."
-msgstr ""
+msgstr "无法通过局域网连接打印机，请输入正确的IP地址和访问码。"
 
 msgid "IP"
 msgstr ""
 
 msgid "Access Code"
-msgstr ""
+msgstr "访问码"
 
 msgid ""
 "Note : The location of IP and access code on the machine is as follows :"
@@ -3939,7 +3946,7 @@ msgstr ""
 
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s (%s)."
-msgstr ""
+msgstr "盘 %d: %s 不支持耗材丝 %s(%s)."
 
 msgid "Switching the language requires application restart.\n"
 msgstr "切换语言要求重启应用程序。\n"
@@ -4414,7 +4421,7 @@ msgstr "错误"
 msgid ""
 "Please check the following infomation and click Confirm to continue sending "
 "print:"
-msgstr ""
+msgstr "请检查以下信息，并点击确认继续发送打印："
 
 msgid ""
 "The printer type used to generate G-code is not the same type as the "
@@ -4548,8 +4555,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid "Line width"
@@ -5676,7 +5683,7 @@ msgstr "层高不能超过喷嘴直径"
 
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
-msgstr ""
+msgstr "盘 %d: %s 不支持耗材丝 %s"
 
 msgid "Generating skirt & brim"
 msgstr "正在生成skirt和brim"
@@ -11594,8 +11601,8 @@ msgstr ""
 #~ msgstr "正在准备设置页"
 
 #~ msgid ""
-#~ "You have the following presets with saved options for \"Print Host upload"
-#~ "\""
+#~ "You have the following presets with saved options for \"Print Host "
+#~ "upload\""
 #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
 
 #~ msgid ""