1.Add nozzle wrap detection for the third layer
2.Adjust the calibration extrusion line width
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7110163b08e889dd2683d2705056b53ac70b793c
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
Set brim gap to 0 makes brim too hard to remove
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie37736d3a96735759b432b4b61dcc4a82c422515
1. Modify some params for Bambu PC,ASA,ABS. Reduce fan speed.Add fan
layer time
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibd73dd2ed4848c5ade4f38fd491c85369c08cece
If the layer height is lower than 0.2, support_top_z_distance and support_bottom_z_distance should also be lower.
jira: none
Change-Id: I3d2904bbfd81330df74c389a3978b721c03caab5
(cherry picked from commit 83c61556de3b2d00a7735b386171f83495874cc2)
1. Set brim_object_gap to 0 so brim will be attached to the model
2. Set extruder_clearance_height_to_rod to 34mm for X&P series to avoid
collisions
github:#3371
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia554519f2c0cc7bdb5b768ea996a7eed4e2e61d6
1.Update filament change gcode. Optimize the flushing and
wiping actions when changing filament
2.Upadte machine end gcoed.Avoid the print head from colliding
with the printed material at the end of printing
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I79868d41fbaa41269fe21644bee487556a7b66fe
1.Set min_layer_height to 0.04,max_layer_height to 0.14 in A1 0.2 nozzle
2.Fix some spelling mistakes in gcode
Github: #3475,#3477
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Idca0a8dace0eb96492bf3b55c6786dc4e8bab057
1. Update A1 machine gcode.Add multiple layers head wrapping detection.
Avoid the issue of excessive load angle in G28 X.
2. Correct some spelling errors in A1 and A1 mini machine gcode
jira:[NEW]
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia830d45842ed7797c89babd3f05c00abc5db0c4c
