Fix leapfrog profiles

CURA-6951

resources/definitions/leapfrog_bolt_pro.def.json

@@ -13,7 +13,6 @@
         "supports_usb_connection": false,
         "supports_network_connection": false,
         "has_materials": true,
-        "preferred_material": "leapfrog",
         "has_machine_quality": true,
         "has_variants": true,
         "preferred_variant_name": "Brass 0.4",

resources/quality/Leapfrog_Bolt_Pro/Leapfrog_Bolt_Pro_global_standard.inst.cfg

@@ -4,7 +4,7 @@ name = Standard
 definition = leapfrog_bolt_pro
 
 [metadata]
-setting_version = 9
+setting_version = 10
 type = quality
 quality_type = standard
 weight = 0

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -4,18 +4,18 @@ name = Standard
 definition = leapfrog_bolt_pro
 
 [metadata]
-setting_version = 9
+setting_version = 10
 type = quality
 quality_type = standard
-weight = 1
+weight = 0
 material = leapfrog_abs_natural
+variant = Brass 0.4
 
 [values]
 layer_height_0 = 0.3
 line_width = 0.4
 initial_layer_line_width_factor = 120
 
-
 wall_thickness = 0.8
 wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
@@ -30,9 +30,6 @@ z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1
 
-
-
-
 infill_sparse_density = 20
 infill_pattern = grid
 connect_infill_polygons = True
@@ -41,7 +38,6 @@ infill_wipe_dist = 0
 infill_before_walls = True
 min_infill_area = 0
 
-
 retraction_enable = True
 retract_at_layer_change = False
 retraction_amount = 2
@@ -49,8 +45,6 @@ retraction_speed = 25
 switch_extruder_retraction_amount = 15
 switch_extruder_retraction_speeds = 20
 
-
-
 speed_print = 35
 speed_wall = 25
 speed_wall_0 = 25
@@ -64,8 +58,6 @@ speed_slowdown_layers = 1
 speed_equalize_flow_enabled = True
 speed_equalize_flow_max = 150
 
-								
-
 retraction_combing = all
 travel_avoid_other_parts = True
 travel_avoid_supports = True
@@ -75,7 +67,6 @@ retraction_hop = 2
 retraction_hop_after_extruder_switch = True
 retraction_hop_after_extruder_switch_height = 2
 
-
 cool_fan_enabled = True
 cool_fan_speed = 30
 cool_fan_speed_min = 0
@@ -101,15 +92,12 @@ support_join_distance = 2
 support_tower_diameter = 3
 support_tower_roof_angle = 65
 
-
-
 adhesion_type = brim
 brim_width = 8
 brim_line_count = 14
 brim_outside_only = True
 skirt_brim_minimal_length = 250
 
-
 prime_tower_enable = True
 prime_tower_size = 20
 prime_tower_min_volume = 6

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg

@@ -0,0 +1,107 @@
+[general]
+version = 4
+name = Standard
+definition = leapfrog_bolt_pro
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = standard
+weight = 0
+material = leapfrog_abs_natural
+variant = NozzleX 0.4
+
+[values]
+layer_height_0 = 0.3
+line_width = 0.4
+initial_layer_line_width_factor = 120
+
+wall_thickness = 0.8
+wall_0_wipe_dist = 0.2
+top_bottom_thickness = 0.8
+top_bottom_pattern = lines
+optimize_wall_printing_order = True
+travel_compensate_overlapping_walls_enabled = True
+travel_compensate_overlapping_walls_0_enabled = True
+travel_compensate_overlapping_walls_x_enabled = True
+fill_perimeter_gaps = everywhere
+filter_out_tiny_gaps = True
+z_seam_type = sharpest_corner
+z_seam_corner = hide_seam
+skin_outline_count = 1
+
+infill_sparse_density = 20
+infill_pattern = grid
+connect_infill_polygons = True
+infill_overlap = 0
+infill_wipe_dist = 0
+infill_before_walls = True
+min_infill_area = 0
+
+retraction_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_speed = 25
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+
+speed_print = 35
+speed_wall = 25
+speed_wall_0 = 25
+speed_wall_x = 35
+speed_topbottom = 25	
+speed_travel = 200
+speed_layer_0 = 25
+speed_support = 40
+speed_travel_layer_0 = 45
+speed_slowdown_layers = 1
+speed_equalize_flow_enabled = True
+speed_equalize_flow_max = 150
+
+retraction_combing = all
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_hop = 2
+retraction_hop_after_extruder_switch = True
+retraction_hop_after_extruder_switch_height = 2
+
+cool_fan_enabled = True
+cool_fan_speed = 30
+cool_fan_speed_min = 0
+cool_fan_speed_max = 30
+cool_min_layer_time_fan_speed_max = 5
+cool_fan_speed_0 = 0
+cool_fan_full_at_height = 0.5
+cool_fan_full_layer = 3
+cool_min_layer_time = 5
+cool_min_speed = 10
+
+support_interface_enable = False
+support_angle = 50
+support_pattern = zigzag
+support_connect_zigzags = False
+support_infill_rate = 20
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_join_distance = 2
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+
+adhesion_type = brim
+brim_width = 8
+brim_line_count = 14
+brim_outside_only = True
+skirt_brim_minimal_length = 250
+
+prime_tower_enable = True
+prime_tower_size = 20
+prime_tower_min_volume = 6
+prime_tower_position_x = 169
+prime_tower_position_y = 25
+prime_tower_wipe_enabled = True
+prime_tower_brim_enable = True

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg

@@ -4,18 +4,18 @@ name = Standard
 definition = leapfrog_bolt_pro
 
 [metadata]
-setting_version = 9
+setting_version = 10
 type = quality
 quality_type = standard
-weight = 1
+weight = 0
 material = leapfrog_epla_natural
+variant = Brass 0.4
 
 [values]
 layer_height_0 = 0.3
 line_width = 0.4
 initial_layer_line_width_factor = 120
 
-
 wall_thickness = 0.8
 wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
@@ -30,9 +30,6 @@ z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1
 
-
-
-
 infill_sparse_density = 20
 infill_pattern = grid
 connect_infill_polygons = True
@@ -41,7 +38,6 @@ infill_wipe_dist = 0
 infill_before_walls = True
 min_infill_area = 0
 
-
 retraction_enable = True
 retract_at_layer_change = False
 retraction_amount = 2
@@ -49,8 +45,6 @@ retraction_speed = 25
 switch_extruder_retraction_amount = 15
 switch_extruder_retraction_speeds = 20
 
-
-
 speed_print = 50
 speed_wall = 25
 speed_wall_0 = 25
@@ -74,7 +68,6 @@ retraction_hop = 2
 retraction_hop_after_extruder_switch = True
 retraction_hop_after_extruder_switch_height = 2
 
-
 cool_fan_enabled = True
 cool_fan_speed = 100
 cool_fan_speed_min = 100
@@ -100,14 +93,11 @@ support_join_distance = 2
 support_tower_diameter = 3
 support_tower_roof_angle = 65
 
-
-
 adhesion_type = skirt
 skirt_line_count = 3
 skirt_gap = 1
 skirt_brim_minimal_length = 250
 
-
 prime_tower_enable = True
 prime_tower_size = 20
 prime_tower_min_volume = 6

resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg

@@ -0,0 +1,107 @@
+[general]
+version = 4
+name = Standard
+definition = leapfrog_bolt_pro
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = standard
+weight = 0
+material = leapfrog_epla_natural
+variant = NozzleX 0.4
+
+[values]
+layer_height_0 = 0.3
+line_width = 0.4
+initial_layer_line_width_factor = 120
+
+wall_thickness = 0.8
+wall_0_wipe_dist = 0.2
+top_bottom_thickness = 0.8
+top_bottom_pattern = lines
+optimize_wall_printing_order = True
+travel_compensate_overlapping_walls_enabled = True
+travel_compensate_overlapping_walls_0_enabled = True
+travel_compensate_overlapping_walls_x_enabled = True
+fill_perimeter_gaps = everywhere
+filter_out_tiny_gaps = True
+z_seam_type = sharpest_corner
+z_seam_corner = hide_seam
+skin_outline_count = 1
+
+infill_sparse_density = 20
+infill_pattern = grid
+connect_infill_polygons = True
+infill_overlap = 0
+infill_wipe_dist = 0
+infill_before_walls = True
+min_infill_area = 0
+
+retraction_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_speed = 25
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+
+speed_print = 50
+speed_wall = 25
+speed_wall_0 = 25
+speed_wall_x = 40
+speed_topbottom = 25	
+speed_travel = 200
+speed_layer_0 = 25
+speed_support = 50
+speed_travel_layer_0 = 45
+speed_slowdown_layers = 1
+speed_equalize_flow_enabled = True
+speed_equalize_flow_max = 150
+acceleration_enabled = False
+
+retraction_combing = all
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+retraction_hop = 2
+retraction_hop_after_extruder_switch = True
+retraction_hop_after_extruder_switch_height = 2
+
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_min = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 5
+cool_fan_speed_0 = 0
+cool_fan_full_at_height = 0.5
+cool_fan_full_layer = 4
+cool_min_layer_time = 5
+cool_min_speed = 5
+
+support_interface_enable = False
+support_angle = 50
+support_pattern = zigzag
+support_connect_zigzags = False
+support_infill_rate = 20
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_join_distance = 2
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+
+adhesion_type = skirt
+skirt_line_count = 3
+skirt_gap = 1
+skirt_brim_minimal_length = 250
+
+prime_tower_enable = True
+prime_tower_size = 20
+prime_tower_min_volume = 6
+prime_tower_position_x = 169
+prime_tower_position_y = 25
+prime_tower_wipe_enabled = True
+prime_tower_brim_enable = True

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg

@@ -4,18 +4,18 @@ name = Standard
 definition = leapfrog_bolt_pro
 
 [metadata]
-setting_version = 9
+setting_version = 10
 type = quality
 quality_type = standard
-weight = 1
+weight = 0
 material = leapfrog_pva_natural
+variant = Brass 0.4
 
 [values]
 layer_height_0 = 0.3
 line_width = 0.4
 initial_layer_line_width_factor = 120
 
-
 wall_thickness = 0.8
 wall_0_wipe_dist = 0.2
 top_bottom_thickness = 0.8
@@ -30,9 +30,6 @@ z_seam_type = sharpest_corner
 z_seam_corner = hide_seam
 skin_outline_count = 1
 
-
-
-
 infill_sparse_density = 20
 infill_pattern = grid
 connect_infill_polygons = True
@@ -41,7 +38,6 @@ infill_wipe_dist = 0
 infill_before_walls = True
 min_infill_area = 0
 
-
 retraction_enable = True
 retract_at_layer_change = False
 retraction_amount = 2
@@ -49,8 +45,6 @@ retraction_speed = 25
 switch_extruder_retraction_amount = 15
 switch_extruder_retraction_speeds = 20
 
-
-
 speed_print = 50
 speed_wall = 20
 speed_wall_0 = 20
@@ -69,11 +63,8 @@ travel_avoid_other_parts = True
 travel_avoid_supports = True
 retraction_hop_enabled = False
 
-
-
 retraction_hop_after_extruder_switch_height = 2
 
-
 cool_fan_enabled = True
 cool_fan_speed = 100
 cool_fan_speed_min = 100
@@ -99,14 +90,11 @@ support_join_distance = 2
 support_tower_diameter = 3
 support_tower_roof_angle = 65
 
-
-
 adhesion_type = skirt
 skirt_line_count = 3
 skirt_gap = 1
 skirt_brim_minimal_length = 250
 
-
 prime_tower_enable = True
 prime_tower_size = 20
 prime_tower_min_volume = 6

resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg

@@ -0,0 +1,104 @@
+[general]
+version = 4
+name = Standard
+definition = leapfrog_bolt_pro
+
+[metadata]
+setting_version = 10
+type = quality
+quality_type = standard
+weight = 0
+material = leapfrog_pva_natural
+variant = NozzleX 0.4
+
+[values]
+layer_height_0 = 0.3
+line_width = 0.4
+initial_layer_line_width_factor = 120
+
+wall_thickness = 0.8
+wall_0_wipe_dist = 0.2
+top_bottom_thickness = 0.8
+top_bottom_pattern = lines
+optimize_wall_printing_order = True
+travel_compensate_overlapping_walls_enabled = True
+travel_compensate_overlapping_walls_0_enabled = True
+travel_compensate_overlapping_walls_x_enabled = True
+fill_perimeter_gaps = everywhere
+filter_out_tiny_gaps = True
+z_seam_type = sharpest_corner
+z_seam_corner = hide_seam
+skin_outline_count = 1
+
+infill_sparse_density = 20
+infill_pattern = grid
+connect_infill_polygons = True
+infill_overlap = 0
+infill_wipe_dist = 0
+infill_before_walls = True
+min_infill_area = 0
+
+retraction_enable = True
+retract_at_layer_change = False
+retraction_amount = 2
+retraction_speed = 25
+switch_extruder_retraction_amount = 15
+switch_extruder_retraction_speeds = 20
+
+speed_print = 50
+speed_wall = 20
+speed_wall_0 = 20
+speed_wall_x = 20
+speed_topbottom = 25	
+speed_travel = 200
+speed_layer_0 = 25
+speed_support = 40
+speed_travel_layer_0 = 45
+speed_slowdown_layers = 1
+speed_equalize_flow_enabled = True
+speed_equalize_flow_max = 150
+
+retraction_combing = all
+travel_avoid_other_parts = True
+travel_avoid_supports = True
+retraction_hop_enabled = False
+
+retraction_hop_after_extruder_switch_height = 2
+
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_min = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 5
+cool_fan_speed_0 = 0
+cool_fan_full_at_height = 0.5
+cool_fan_full_layer = 4
+cool_min_layer_time = 5
+cool_min_speed = 5
+
+support_interface_enable = False
+support_angle = 50
+support_pattern = zigzag
+support_connect_zigzags = False
+support_infill_rate = 20
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.4
+support_bottom_stair_step_height = 0.3
+support_bottom_stair_step_width = 5
+support_join_distance = 2
+support_tower_diameter = 3
+support_tower_roof_angle = 65
+
+adhesion_type = skirt
+skirt_line_count = 3
+skirt_gap = 1
+skirt_brim_minimal_length = 250
+
+prime_tower_enable = True
+prime_tower_size = 20
+prime_tower_min_volume = 6
+prime_tower_position_x = 169
+prime_tower_position_y = 25
+prime_tower_wipe_enabled = True
+prime_tower_brim_enable = True

resources/variants/Leapfrog_Bolt_Pro_Brass_0.4.inst.cfg

@@ -4,7 +4,7 @@ version = 4
 definition = leapfrog_bolt_pro
 
 [metadata]
-setting_version = 9
+setting_version = 10
 type = variant
 hardware_type = nozzle
 

resources/variants/Leapfrog_Bolt_Pro_NozzleX_0.4.inst.cfg

@@ -4,7 +4,7 @@ version = 4
 definition = leapfrog_bolt_pro
 
 [metadata]
-setting_version = 9
+setting_version = 10
 type = variant
 hardware_type = nozzle