优化PVA打印的配置

resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1

resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg

@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1