Replace quality profiles with optimised versions of Ruben's script

With the global quality profiles merged this now works properly.

CURA-2645

resources/definitions/ultimaker3.def.json

@@ -38,8 +38,8 @@
         "machine_depth": { "default_value": 215 },
         "machine_height": { "default_value": 200 },
         "machine_heated_bed": { "default_value": true },
-        "machine_nozzle_heat_up_speed": { "default_value": 0.8 },
+        "machine_nozzle_heat_up_speed": { "default_value": 1.4 },
-        "machine_nozzle_cool_down_speed": { "default_value": 1 },
+        "machine_nozzle_cool_down_speed": { "default_value": 0.8 },
         "machine_head_with_fans_polygon":
         {
             "default_value":
@@ -50,14 +50,12 @@
                 [ 60, -30 ]
             ]
         },
-        "machine_center_is_zero": { "default_value": false },
         "machine_gcode_flavor": { "default_value": "Griffin" },
         "machine_max_feedrate_x": { "default_value": 300 },
         "machine_max_feedrate_y": { "default_value": 300 },
         "machine_max_feedrate_z": { "default_value": 40 },
         "machine_acceleration": { "default_value": 3000 },
         "gantry_height": { "default_value": 60 },
-        "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_disallowed_areas": { "default_value": [
             [[-91.5, -115], [-115, -115], [-115, -104.6], [-91.5, -104.6]],
             [[-99.5, -104.6], [-115, -104.6], [-115, 104.6], [-99.5, 104.6]],
@@ -69,16 +67,93 @@
             [[100.5, -54.5], [100.5, 99.3], [115, 99.3], [115, -54.5]],
             [[77, 99.3], [77, 115], [115, 115], [115, 99.3]]
         ]},
-        "machine_show_variants": { "default_value": true },
         "machine_extruder_count": { "default_value": 2 },
-        "print_sequence": {"enabled": false},
         "extruder_prime_pos_abs": { "default_value": true },
-        "extruder_prime_pos_x": { "enabled": false },
-        "extruder_prime_pos_y": { "enabled": false },
         "machine_start_gcode": { "default_value": "" },
         "machine_end_gcode": { "default_value": "" },
         "prime_tower_position_x": { "default_value": 175 },
         "prime_tower_position_y": { "default_value": 179 },
-        "speed_prime_tower": { "default_value": 30 }
+
+        "extruder_prime_pos_x": { "enabled": false },
+        "extruder_prime_pos_y": { "enabled": false },
+        "print_sequence": {"enabled": false},
+
+        "acceleration_enabled": { "value": "True" },
+        "acceleration_layer_0": { "value": "acceleration_topbottom" },
+        "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
+        "acceleration_print": { "value": "4000" },
+        "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
+        "acceleration_support_interface": { "value": "acceleration_topbottom" },
+        "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" },
+        "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" },
+        "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" },
+        "brim_width": { "value": "3" },
+        "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
+        "cool_fan_speed": { "value": "50" },
+        "cool_fan_speed_max": { "value": "100" },
+        "cool_min_speed": { "value": "5" },
+        "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
+        "infill_overlap": { "value": "0" },
+        "infill_pattern": { "value": "'triangles'" },
+        "infill_wipe_dist": { "value": "0" },
+        "jerk_enabled": { "value": "True" },
+        "jerk_layer_0": { "value": "jerk_topbottom" },
+        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_print": { "value": "25" },
+        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_support_interface": { "value": "jerk_topbottom" },
+        "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
+        "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
+        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
+        "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
+        "line_width": { "value": "machine_nozzle_size * 0.875" },
+        "machine_min_cool_heat_time_window": { "value": "15" },
+        "material_print_temperature": { "value": "200" },
+        "material_standby_temperature": { "value": "100" },
+        "multiple_mesh_overlap": { "value": "0" },
+        "prime_tower_enable": { "value": "True" },
+        "raft_airgap": { "value": "0" },
+        "raft_base_speed": { "value": "20" },
+        "raft_base_thickness": { "value": "0.3" },
+        "raft_interface_line_spacing": { "value": "0.5" },
+        "raft_interface_line_width": { "value": "0.5" },
+        "raft_interface_speed": { "value": "20" },
+        "raft_interface_thickness": { "value": "0.2" },
+        "raft_jerk": { "value": "jerk_layer_0" },
+        "raft_margin": { "value": "10" },
+        "raft_speed": { "value": "25" },
+        "raft_surface_layers": { "value": "1" },
+        "retraction_amount": { "value": "2" },
+        "retraction_count_max": { "value": "10" },
+        "retraction_extrusion_window": { "value": "1" },
+        "retraction_hop": { "value": "2" },
+        "retraction_hop_enabled": { "value": "True" },
+        "retraction_hop_only_when_collides": { "value": "True" },
+        "retraction_min_travel": { "value": "5" },
+        "retraction_prime_speed": { "value": "15" },
+        "skin_overlap": { "value": "10" },
+        "speed_layer_0": { "value": "20" },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_print": { "value": "35" },
+        "speed_support": { "value": "speed_wall_0" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+        "speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" },
+        "speed_travel": { "value": "250" },
+        "speed_wall": { "value": "math.ceil(speed_print * 30 / 35)" },
+        "speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "support_angle": { "value": "45" },
+        "support_pattern": { "value": "'triangles'" },
+        "support_use_towers": { "value": "False" },
+        "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+        "support_z_distance": { "value": "0" },
+        "switch_extruder_prime_speed": { "value": "15" },
+        "switch_extruder_retraction_amount": { "value": "8" },
+        "top_bottom_thickness": { "value": "1" },
+        "travel_avoid_distance": { "value": "3" },
+        "wall_0_inset": { "value": "0" },
+        "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
+        "wall_thickness": { "value": "1" }
     }
 }

resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg

@@ -10,116 +10,14 @@ material = generic_abs_ultimaker3_AA_0.4
 weight = -2
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
 material_print_temperature = 240
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 16
-prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-raft_base_speed = =0.75 * raft_speed
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 20
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 60
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg

@@ -10,116 +10,14 @@ material = generic_abs_ultimaker3_AA_0.4
 weight = -1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
 material_print_temperature = 235
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 16
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 60
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg

@@ -10,116 +10,12 @@ material = generic_abs_ultimaker3_AA_0.4
 weight = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.06
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
-material_print_temperature = 225
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 16
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 50
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 30 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg

@@ -10,116 +10,12 @@ material = generic_abs_ultimaker3_AA_0.4
 weight = 0
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 5
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
 material_print_temperature = 230
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 16
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 55
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 30 / 55)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg

@@ -10,116 +10,13 @@ material = generic_cpe_ultimaker3_AA_0.4
 weight = -2
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 70
 material_print_temperature = 250
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 17
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 20
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 60
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg

@@ -10,116 +10,12 @@ material = generic_cpe_ultimaker3_AA_0.4
 weight = -1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 70
 material_print_temperature = 245
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 17
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 60
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg

@@ -10,116 +10,12 @@ material = generic_cpe_ultimaker3_AA_0.4
 weight = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.06
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 70
-material_print_temperature = 235
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
 prime_tower_size = 17
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 50
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 30 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -10,116 +10,12 @@ material = generic_cpe_ultimaker3_AA_0.4
 weight = 0
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 70
 material_print_temperature = 240
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-prime_tower_enable = True
 prime_tower_size = 17
-prime_tower_wipe_enabled = True
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 55
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 30 / 55)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -10,118 +10,25 @@ material = generic_nylon_ultimaker3_AA_0.4
 weight = -2
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
 adhesion_type = raft
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 40
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 infill_overlap_mm = 0.05
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 60
 material_print_temperature = 255
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-ooze_shield_dist = 2
-ooze_shield_enabled = False
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
-retraction_amount = 8
-retraction_count_max = 25
-retraction_extra_prime_amount = 0
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_speed = 25
 skin_overlap = 50
-speed_infill = =speed_print
 speed_layer_0 = 10
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_thickness = 1.3
-
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_surface_layers = 2
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-
-brim_width = 7
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-support_bottom_stair_step_height = 0.3
 wall_line_width_x = =wall_line_width
 

resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -10,116 +10,25 @@ material = generic_nylon_ultimaker3_AA_0.4
 weight = -1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
 adhesion_type = raft
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 40
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 infill_overlap_mm = 0.05
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 60
 material_print_temperature = 250
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-ooze_shield_dist = 2
-ooze_shield_enabled = False
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
-retraction_amount = 8
-retraction_count_max = 25
-retraction_extra_prime_amount = 0
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_speed = 25
 skin_overlap = 50
-speed_infill = =speed_print
 speed_layer_0 = 10
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_surface_layers = 2
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-
-brim_width = 7
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-support_bottom_stair_step_height = 0.3
 wall_line_width_x = =wall_line_width
+

resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -10,116 +10,24 @@ material = generic_nylon_ultimaker3_AA_0.4
 weight = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
 adhesion_type = raft
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 40
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 infill_overlap_mm = 0.05
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.06
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 60
-material_print_temperature = 245
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-ooze_shield_dist = 2
-ooze_shield_enabled = False
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
-retraction_amount = 8
-retraction_count_max = 25
-retraction_extra_prime_amount = 0
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_speed = 25
 skin_overlap = 50
-speed_infill = =speed_print
 speed_layer_0 = 10
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_surface_layers = 2
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-
-brim_width = 7
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-support_bottom_stair_step_height = 0.3
 wall_line_width_x = =wall_line_width
+

resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -10,116 +10,24 @@ material = generic_nylon_ultimaker3_AA_0.4
 weight = 0
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
 adhesion_type = raft
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 40
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 infill_overlap_mm = 0.05
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 60
-material_print_temperature = 245
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 ooze_shield_angle = 40
-ooze_shield_dist = 2
-ooze_shield_enabled = False
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
-retraction_amount = 8
-retraction_count_max = 25
-retraction_extra_prime_amount = 0
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_speed = 25
 skin_overlap = 50
-speed_infill = =speed_print
 speed_layer_0 = 10
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_surface_layers = 2
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-
-brim_width = 7
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-support_bottom_stair_step_height = 0.3
 wall_line_width_x = =wall_line_width
+

resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg

@@ -10,116 +10,17 @@ material = generic_pla_ultimaker3_AA_0.4
 weight = -2
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_min_layer_time = 5
+cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_bed_temperature = 60
 material_print_temperature = 205
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = False
-prime_tower_size = 15
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 20
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-cool_fan_speed_max = =cool_fan_speed
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_fan_speed = 100
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg

@@ -10,116 +10,16 @@ material = generic_pla_ultimaker3_AA_0.4
 weight = -1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_min_layer_time = 5
+cool_fan_speed_max = =cool_fan_speed
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_bed_temperature = 60
-material_print_temperature = 200
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = False
-prime_tower_size = 15
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 80
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 80)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-cool_fan_speed_max = =cool_fan_speed
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_fan_speed = 100
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg

@@ -10,116 +10,17 @@ material = generic_pla_ultimaker3_AA_0.4
 weight = 1
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_min_layer_time = 5
+cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.06
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_bed_temperature = 60
 material_print_temperature = 195
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 10
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
 speed_print = 60
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
-speed_travel = 250
 speed_wall = =math.ceil(speed_print * 30 / 60)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-cool_fan_speed_max = =cool_fan_speed
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
 
-cool_fan_speed = 100
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg

@@ -10,117 +10,14 @@ material = generic_pla_ultimaker3_AA_0.4
 weight = 0
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_min_layer_time = 5
+cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_bed_temperature = 60
-material_print_temperature = 200
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
 prime_tower_enable = False
-prime_tower_size = 15
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
 skin_overlap = 10
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
 
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-cool_fan_speed_max = =cool_fan_speed
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
-
-cool_fan_speed = 100
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_aa0.4_PVA_Not_Supported_Quality.inst.cfg

@@ -11,116 +11,3 @@ material = generic_pva_ultimaker3_AA_0.4
 supported = false
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 3
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.8
-machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 215
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
-raft_airgap = 0
-raft_base_speed = 20
-raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
-raft_interface_speed = 20
-raft_interface_thickness = 0.2
-raft_jerk = =jerk_layer_0
-raft_margin = 10
-raft_speed = 25
-raft_surface_layers = 1
-retraction_amount = 2
-retraction_count_max = 10
-retraction_extrusion_window = =retraction_amount
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_min_travel = 5
-retraction_prime_speed = 15
-skin_overlap = 10
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 35
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 20 / 35)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 35)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 45
-support_bottom_height = =layer_height * 2
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 30
-support_interface_enable = True
-support_join_distance = 3
-support_line_width = =round(line_width * 0.4 / 0.35, 2)
-support_offset = 3
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =wall_line_width_0 * 3
-support_xy_distance_overhang = =wall_line_width_0 / 2
-support_z_distance = 0
-switch_extruder_prime_speed = 15
-switch_extruder_retraction_amount = 8
-top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
-
-support_top_distance = =support_z_distance
-support_bottom_distance = =support_z_distance / 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-cool_fan_speed_max = =cool_fan_speed
-
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-material_bed_temperature = 60
-ooze_shield_dist = 2
-retraction_speed = 25
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_ABS_Not_Supported_Quality.inst.cfg

@@ -11,116 +11,3 @@ weight = 0
 supported = false
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 80
-material_print_temperature = 230
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 16
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 55
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 55)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
-
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_CPE_Not_Supported_Quality.inst.cfg

@@ -11,116 +11,3 @@ weight = 0
 supported = false
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_bed_temperature = 70
-material_print_temperature = 240
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 17
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 55
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 55)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
-
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_Nylon_Not_Supported_Quality.inst.cfg

@@ -11,116 +11,3 @@ weight = 0
 supported = false
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = raft
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 40
-cool_fan_speed_max = 100
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 20
-cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_overlap_mm = 0.05
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 60
-material_print_temperature = 245
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 40
-ooze_shield_dist = 2
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_jerk = =jerk_layer_0
-raft_margin = 10
-raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
-retraction_amount = 8
-retraction_count_max = 25
-retraction_extra_prime_amount = 0
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_speed = 25
-skin_overlap = 50
-speed_infill = =speed_print
-speed_layer_0 = 10
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-switch_extruder_prime_speed = 30
-switch_extruder_retraction_amount = 30
-switch_extruder_retraction_speeds = 40
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_surface_layers = 2
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-
-brim_width = 7
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-support_bottom_stair_step_height = 0.3
-wall_line_width_x = =wall_line_width

resources/quality/ultimaker3/um3_bb0.4_PLA_Not_Supported_Quality.inst.cfg

@@ -11,117 +11,3 @@ weight = 0
 supported = false
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
-cool_min_layer_time = 5
-cool_min_speed = 7
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.75
-machine_nozzle_heat_up_speed = 1.6
-material_bed_temperature = 60
-material_print_temperature = 200
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = False
-prime_tower_size = 15
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_wipe_enabled = True
-raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_speed = =speed_print / 60 * 30
-raft_interface_speed = =raft_speed * 0.75
-raft_base_speed = =0.75 * raft_speed
-raft_acceleration = =acceleration_print
-raft_jerk = =jerk_print
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-skin_overlap = 10
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 70
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 30 / 70)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 70)
-speed_wall_0 = =math.ceil(speed_wall * 20 / 30)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
-top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
-
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-cool_fan_speed_max = =cool_fan_speed
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
-retraction_amount = 6.5
-
-cool_fan_speed = 100
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_min_travel = =line_width * 2
-retraction_prime_speed = =retraction_speed
-retraction_speed = 25
-support_bottom_stair_step_height = 0.3
-switch_extruder_prime_speed = =switch_extruder_retraction_speeds
-switch_extruder_retraction_amount = =machine_heat_zone_length
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg

@@ -10,117 +10,7 @@ weight = -2
 material = generic_pva_ultimaker3_BB_0.4
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 3
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.8
-machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = 225
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
-raft_airgap = 0
-raft_base_speed = 20
-raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
-raft_interface_speed = 20
-raft_interface_thickness = 0.2
-raft_jerk = =jerk_layer_0
-raft_margin = 10
-raft_speed = 25
-raft_surface_layers = 1
-retraction_amount = 2
-retraction_count_max = 10
-retraction_extrusion_window = =retraction_amount
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_min_travel = 5
-retraction_prime_speed = 15
 skin_overlap = 20
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 35
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 20 / 35)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 35)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 45
-support_bottom_height = =layer_height * 2
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 25
-support_interface_enable = True
-support_join_distance = 3
-support_line_width = =round(line_width * 0.4 / 0.35, 2)
-support_offset = 3
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =wall_line_width_0 * 3
-support_xy_distance_overhang = =wall_line_width_0 / 2
-support_z_distance = 0
-switch_extruder_prime_speed = 15
-switch_extruder_retraction_amount = 8
-top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
 
-support_top_distance = =support_z_distance
-support_bottom_distance = =support_z_distance / 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-cool_fan_speed_max = =cool_fan_speed
-
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-material_bed_temperature = 60
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_speed = 25
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg

@@ -10,116 +10,7 @@ quality_type = fast
 material = generic_pva_ultimaker3_BB_0.4
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 3
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.8
-machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = 220
 material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
-raft_airgap = 0
-raft_base_speed = 20
-raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
-raft_interface_speed = 20
-raft_interface_thickness = 0.2
-raft_jerk = =jerk_layer_0
-raft_margin = 10
-raft_speed = 25
-raft_surface_layers = 1
-retraction_amount = 2
-retraction_count_max = 10
-retraction_extrusion_window = =retraction_amount
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_min_travel = 5
-retraction_prime_speed = 15
 skin_overlap = 15
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 35
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 20 / 35)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 35)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 45
-support_bottom_height = =layer_height * 2
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 25
-support_interface_enable = True
-support_join_distance = 3
-support_line_width = =round(line_width * 0.4 / 0.35, 2)
-support_offset = 3
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =wall_line_width_0 * 3
-support_xy_distance_overhang = =wall_line_width_0 / 2
-support_z_distance = 0
-switch_extruder_prime_speed = 15
-switch_extruder_retraction_amount = 8
-top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
-support_top_distance = =support_z_distance
-support_bottom_distance = =support_z_distance / 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-cool_fan_speed_max = =cool_fan_speed
 
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-material_bed_temperature = 60
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_speed = 25
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg

@@ -10,117 +10,6 @@ quality_type = high
 material = generic_pva_ultimaker3_BB_0.4
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 3
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.06
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.8
-machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 215
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
-raft_airgap = 0
-raft_base_speed = 20
-raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
-raft_interface_speed = 20
-raft_interface_thickness = 0.2
-raft_jerk = =jerk_layer_0
-raft_margin = 10
-raft_speed = 25
-raft_surface_layers = 1
-retraction_amount = 2
-retraction_count_max = 10
-retraction_extrusion_window = =retraction_amount
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_min_travel = 5
-retraction_prime_speed = 15
-skin_overlap = 10
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 35
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 20 / 35)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 35)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 45
-support_bottom_height = =layer_height * 2
-support_bottom_stair_step_height = =layer_height
 support_infill_rate = 35
-support_interface_enable = True
+material_standby_temperature = 100
-support_join_distance = 3
-support_line_width = =round(line_width * 0.4 / 0.35, 2)
-support_offset = 3
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =wall_line_width_0 * 3
-support_xy_distance_overhang = =wall_line_width_0 / 2
-support_z_distance = 0
-switch_extruder_prime_speed = 15
-switch_extruder_retraction_amount = 8
-top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
 
-support_top_distance = =support_z_distance
-support_bottom_distance = =support_z_distance / 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-cool_fan_speed_max = =cool_fan_speed
-
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-material_bed_temperature = 60
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_speed = 25
-switch_extruder_retraction_speeds = 20

resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg

@@ -10,117 +10,6 @@ quality_type = normal
 material = generic_pva_ultimaker3_BB_0.4
 
 [values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 3
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.5 / 0.35, 2)
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.8
-machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 215
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-ooze_shield_angle = 60
-ooze_shield_enabled = False
-prime_tower_enable = True
-prime_tower_size = 15
-prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
-raft_airgap = 0
-raft_base_speed = 20
-raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
-raft_interface_line_width = 0.5
-raft_interface_speed = 20
-raft_interface_thickness = 0.2
-raft_jerk = =jerk_layer_0
-raft_margin = 10
-raft_speed = 25
-raft_surface_layers = 1
-retraction_amount = 2
-retraction_count_max = 10
-retraction_extrusion_window = =retraction_amount
-retraction_hop = 2
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_min_travel = 5
-retraction_prime_speed = 15
-skin_overlap = 10
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 35
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 20 / 35)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 30 / 35)
-speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
-speed_wall_x = =speed_wall
-support_angle = 45
-support_bottom_height = =layer_height * 2
-support_bottom_stair_step_height = =layer_height
 support_infill_rate = 30
-support_interface_enable = True
+material_standby_temperature = 100
-support_join_distance = 3
-support_line_width = =round(line_width * 0.4 / 0.35, 2)
-support_offset = 3
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =wall_line_width_0 * 3
-support_xy_distance_overhang = =wall_line_width_0 / 2
-support_z_distance = 0
-switch_extruder_prime_speed = 15
-switch_extruder_retraction_amount = 8
-top_bottom_thickness = 1
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
 
-support_top_distance = =support_z_distance
-support_bottom_distance = =support_z_distance / 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-cool_fan_speed_max = =cool_fan_speed
-
-cool_min_layer_time_fan_speed_max = 10
-infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
-material_bed_temperature = 60
-ooze_shield_dist = 2
-retraction_extra_prime_amount = 0
-retraction_speed = 25
-switch_extruder_retraction_speeds = 20

resources/variants/ultimaker3_aa04.inst.cfg

@@ -8,4 +8,36 @@ author = ultimaker
 type = variant
 
 [values]
-machine_nozzle_size = 0.4
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
+raft_acceleration = =acceleration_print
+raft_airgap = 0.3
+raft_base_speed = =0.75 * raft_speed
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
+raft_interface_speed = =raft_speed * 0.75
+raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_speed = =speed_print / 60 * 30
+raft_surface_layers = 2
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = =retraction_speed
+skin_overlap = 15
+speed_print = 70
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
+support_top_distance = =support_z_distance
+support_use_towers = True
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
+top_bottom_thickness = 1.2
+wall_thickness = 1.3
+

resources/variants/ultimaker3_bb04.inst.cfg

@@ -8,4 +8,18 @@ author = ultimaker
 type = variant
 
 [values]
-machine_nozzle_size = 0.4
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = 215
+retraction_extrusion_window = =retraction_amount
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+support_bottom_height = =layer_height * 2
+support_bottom_stair_step_height = =layer_height
+support_infill_rate = 25
+support_interface_enable = True
+support_join_distance = 3
+support_line_width = =round(line_width * 0.4 / 0.35, 2)
+support_offset = 3
+support_xy_distance = =wall_line_width_0 * 3
+support_xy_distance_overhang = =wall_line_width_0 / 2
+

resources/variants/ultimaker3_extended_aa04.inst.cfg

@@ -8,4 +8,35 @@ author = ultimaker
 type = variant
 
 [values]
+brim_width = 7
+machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_size = 0.4
+raft_airgap = 0.3
+raft_base_speed = 15
+raft_base_thickness = 0.3
+raft_interface_line_spacing = 0.9
+raft_interface_line_width = 0.7
+raft_interface_speed = 15
+raft_interface_thickness = 0.15
+raft_margin = 15
+raft_speed = 20
+raft_surface_layers = 2
+retraction_amount = 6.5
+retraction_count_max = 25
+retraction_min_travel = 1.5
+retraction_prime_speed = 25
+skin_overlap = 15
+speed_print = 70
+speed_topbottom = =math.ceil(speed_print * 30 / 70)
+speed_wall = =math.ceil(speed_print * 30 / 70)
+support_angle = 60
+support_bottom_distance = =support_z_distance / 2
+support_infill_rate = 15
+support_join_distance = 2.0
+support_offset = 0.2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = 20
+switch_extruder_retraction_amount = 20
+top_bottom_thickness = 1.2
+wall_thickness = 1.3

resources/variants/ultimaker3_extended_bb04.inst.cfg

@@ -8,4 +8,20 @@ author = ultimaker
 type = variant
 
 [values]
+cool_fan_speed_max = 100
+machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_size = 0.4
+material_bed_temperature = 60
+material_print_temperature = 215
+raft_acceleration = =acceleration_layer_0
+raft_jerk = =jerk_layer_0
+retraction_extrusion_window = =retraction_amount
+speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
+support_bottom_height = =layer_height * 2
+support_bottom_stair_step_height = =layer_height
+support_interface_enable = True
+support_line_width = =round(line_width * 0.4 / 0.35, 2)
+support_pattern = triangles
+support_use_towers = False
+support_xy_distance = =wall_line_width_0 * 3
+support_xy_distance_overhang = =wall_line_width_0 / 2