Update translation templates

These are the string changes that have been introduced for version 2.4.

resources/i18n/de/fdmextruder.def.json.po

@@ -3,10 +3,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-09-29 13:02+0200\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Absolute Startposition des Extruders"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "Bevorzugen Sie eine absolute Startposition des Extruders anstelle einer relativen Position zur zuletzt bekannten Kopfposition."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Absolute Extruder-Endposition"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "Bevorzugen Sie eine absolute Endposition des Extruders anstelle einer relativen Position zur zuletzt bekannten Kopfposition."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Z-Position Extruder-Einzug"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Die Z-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "X-Position Extruder-Einzug"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Die X-Koordinate der Position, an der die Düse am Druckbeginn einzieht."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Y-Position Extruder-Einzug"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Die Y-Koordinate der Position, an der die Düse am Druckbeginn einzieht."

resources/i18n/es/fdmextruder.def.json.po

@@ -3,10 +3,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-09-29 13:02+0200\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Posición de inicio absoluta del extrusor"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "El extrusor se coloca en la posición de inicio absoluta según la última ubicación conocida del cabezal."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Posición final absoluta del extrusor"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "La posición final del extrusor se considera absoluta, en lugar de relativa a la última ubicación conocida del cabezal."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Posición de preparación del extrusor sobre el eje Z"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Coordenada Z de la posición en la que la tobera queda preparada al inicio de la impresión."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "Posición de preparación del extrusor sobre el eje X"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Coordenada X de la posición en la que la tobera se coloca al inicio de la impresión."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Posición de preparación del extrusor sobre el eje Y"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Coordenada X de la posición en la que la tobera se coloca al inicio de la impresión."

resources/i18n/fdmextruder.def.json.pot

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-10-27 11:28+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"

resources/i18n/fdmprinter.def.json.pot

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-10-27 11:28+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -145,6 +145,27 @@ msgctxt "machine_depth description"
 msgid "The depth (Y-direction) of the printable area."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "machine_shape label"
+msgid "Build plate shape"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_shape description"
+msgid ""
+"The shape of the build plate without taking unprintable areas into account."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_shape option rectangular"
+msgid "Rectangular"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_shape option elliptic"
+msgid "Elliptic"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "machine_height label"
 msgid "Machine height"
@@ -179,7 +200,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_extruder_count label"
-msgid "Number extruders"
+msgid "Number of Extruders"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -232,7 +253,19 @@ msgstr ""
 msgctxt "machine_heat_zone_length description"
 msgid ""
 "The distance from the tip of the nozzle in which heat from the nozzle is "
-"transfered to the filament."
+"transferred to the filament."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_filament_park_distance label"
+msgid "Filament Park Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_filament_park_distance description"
+msgid ""
+"The distance from the tip of the nozzle where to park the filament when an "
+"extruder is no longer used."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -332,6 +365,16 @@ msgctxt "machine_disallowed_areas description"
 msgid "A list of polygons with areas the print head is not allowed to enter."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "nozzle_disallowed_areas label"
+msgid "Nozzle Disallowed Areas"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "nozzle_disallowed_areas description"
+msgid "A list of polygons with areas the nozzle is not allowed to enter."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "machine_head_polygon label"
 msgid "Machine head polygon"
@@ -716,6 +759,18 @@ msgid ""
 "rounded to a whole number."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "wall_0_wipe_dist label"
+msgid "Outer Wall Wipe Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_0_wipe_dist description"
+msgid ""
+"Distance of a travel move inserted after the outer wall, to hide the Z seam "
+"better."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "top_bottom_thickness label"
 msgid "Top/Bottom Thickness"
@@ -877,6 +932,26 @@ msgid ""
 "already a wall in place."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps label"
+msgid "Fill Gaps Between Walls"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps description"
+msgid "Fills the gaps between walls where no walls fit."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps option nowhere"
+msgid "Nowhere"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "fill_perimeter_gaps option everywhere"
+msgid "Everywhere"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "xy_offset label"
 msgid "Horizontal Expansion"
@@ -900,14 +975,14 @@ msgctxt "z_seam_type description"
 msgid ""
 "Starting point of each path in a layer. When paths in consecutive layers "
 "start at the same point a vertical seam may show on the print. When aligning "
-"these at the back, the seam is easiest to remove. When placed randomly the "
+"these near a user specified location, the seam is easiest to remove. When "
-"inaccuracies at the paths' start will be less noticeable. When taking the "
+"placed randomly the inaccuracies at the paths' start will be less "
-"shortest path the print will be quicker."
+"noticeable. When taking the shortest path the print will be quicker."
 msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "z_seam_type option back"
-msgid "Back"
+msgid "User Specified"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -920,6 +995,30 @@ msgctxt "z_seam_type option random"
 msgid "Random"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "z_seam_x label"
+msgid "Z Seam X"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_x description"
+msgid ""
+"The X coordinate of the position near where to start printing each part in a "
+"layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_y label"
+msgid "Z Seam Y"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "z_seam_y description"
+msgid ""
+"The Y coordinate of the position near where to start printing each part in a "
+"layer."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "Ignore Small Z Gaps"
@@ -1000,6 +1099,11 @@ msgctxt "infill_pattern option cubic"
 msgid "Cubic"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "infill_pattern option cubicsubdiv"
+msgid "Cubic Subdivision"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "infill_pattern option tetrahedral"
 msgid "Tetrahedral"
@@ -1010,11 +1114,43 @@ msgctxt "infill_pattern option concentric"
 msgid "Concentric"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "infill_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "infill_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_mult label"
+msgid "Cubic Subdivision Radius"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_mult description"
+msgid ""
+"A multiplier on the radius from the center of each cube to check for the "
+"boundary of the model, as to decide whether this cube should be subdivided. "
+"Larger values lead to more subdivisions, i.e. more small cubes."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_add label"
+msgid "Cubic Subdivision Shell"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "sub_div_rad_add description"
+msgid ""
+"An addition to the radius from the center of each cube to check for the "
+"boundary of the model, as to decide whether this cube should be subdivided. "
+"Larger values lead to a thicker shell of small cubes near the boundary of "
+"the model."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "infill_overlap label"
 msgid "Infill Overlap Percentage"
@@ -1148,6 +1284,19 @@ msgid ""
 "speed of that layer."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "default_material_print_temperature label"
+msgid "Default Printing Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "default_material_print_temperature description"
+msgid ""
+"The default temperature used for printing. This should be the \"base\" "
+"temperature of a material. All other print temperatures should use offsets "
+"based on this value"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "material_print_temperature label"
 msgid "Printing Temperature"
@@ -1159,6 +1308,42 @@ msgid ""
 "The temperature used for printing. Set at 0 to pre-heat the printer manually."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "material_print_temperature_layer_0 label"
+msgid "Printing Temperature Initial Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_print_temperature_layer_0 description"
+msgid ""
+"The temperature used for printing the first layer. Set at 0 to disable "
+"special handling of the initial layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_initial_print_temperature label"
+msgid "Initial Printing Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_initial_print_temperature description"
+msgid ""
+"The minimal temperature while heating up to the Printing Temperature at "
+"which printing can already start."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_final_print_temperature label"
+msgid "Final Printing Temperature"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_final_print_temperature description"
+msgid ""
+"The temperature to which to already start cooling down just before the end "
+"of printing."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "material_flow_temp_graph label"
 msgid "Flow Temperature Graph"
@@ -1195,6 +1380,16 @@ msgid ""
 "printer manually."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "material_bed_temperature_layer_0 label"
+msgid "Build Plate Temperature Initial Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_bed_temperature_layer_0 description"
+msgid "The temperature used for the heated build plate at the first layer."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "material_diameter label"
 msgid "Diameter"
@@ -1230,6 +1425,16 @@ msgid ""
 "Retract the filament when the nozzle is moving over a non-printed area. "
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "retract_at_layer_change label"
+msgid "Retract at Layer Change"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "retract_at_layer_change description"
+msgid "Retract the filament when the nozzle is moving to the next layer."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "retraction_amount label"
 msgid "Retraction Distance"
@@ -1553,7 +1758,9 @@ msgstr ""
 msgctxt "speed_travel_layer_0 description"
 msgid ""
 "The speed of travel moves in the initial layer. A lower value is advised to "
-"prevent pulling previously printed parts away from the build plate."
+"prevent pulling previously printed parts away from the build plate. The "
+"value of this setting can automatically be calculated from the ratio between "
+"the Travel Speed and the Print Speed."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1991,9 +2198,7 @@ msgid ""
 "results in slightly longer travel moves but reduces the need for "
 "retractions. If combing is off, the material will retract and the nozzle "
 "moves in a straight line to the next point. It is also possible to avoid "
-"combing over top/bottom skin areas by combing within the infill only. It is "
+"combing over top/bottom skin areas by combing within the infill only."
-"also possible to avoid combing over top/bottom skin areas by combing within "
-"the infill only."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2013,7 +2218,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "travel_avoid_other_parts label"
-msgid "Avoid Printed Parts when Traveling"
+msgid "Avoid Printed Parts When Traveling"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2035,9 +2240,47 @@ msgid ""
 "during travel moves."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "start_layers_at_same_position label"
+msgid "Start Layers with the Same Part"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "start_layers_at_same_position description"
+msgid ""
+"In each layer start with printing the object near the same point, so that we "
+"don't start a new layer with printing the piece which the previous layer "
+"ended with. This makes for better overhangs and small parts, but increases "
+"printing time."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_x label"
+msgid "Layer Start X"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_x description"
+msgid ""
+"The X coordinate of the position near where to find the part to start "
+"printing each layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_y label"
+msgid "Layer Start Y"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "layer_start_y description"
+msgid ""
+"The Y coordinate of the position near where to find the part to start "
+"printing each layer."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "retraction_hop_enabled label"
-msgid "Z Hop when Retracted"
+msgid "Z Hop When Retracted"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2156,6 +2399,19 @@ msgid ""
 "maximum fan speed."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "cool_fan_speed_0 label"
+msgid "Initial Fan Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "cool_fan_speed_0 description"
+msgid ""
+"The speed at which the fans spin at the start of the print. In subsequent "
+"layers the fan speed is gradually increased up to the layer corresponding to "
+"Regular Fan Speed at Height."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "cool_fan_full_at_height label"
 msgid "Regular Fan Speed at Height"
@@ -2165,7 +2421,8 @@ msgstr ""
 msgctxt "cool_fan_full_at_height description"
 msgid ""
 "The height at which the fans spin on regular fan speed. At the layers below "
-"the fan speed gradually increases from zero to regular fan speed."
+"the fan speed gradually increases from Initial Fan Speed to Regular Fan "
+"Speed."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -2358,6 +2615,11 @@ msgctxt "support_pattern option concentric"
 msgid "Concentric"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_pattern option zigzag"
 msgid "Zig Zag"
@@ -2635,6 +2897,11 @@ msgctxt "support_interface_pattern option concentric"
 msgid "Concentric"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_interface_pattern option concentric_3d"
+msgid "Concentric 3D"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "support_interface_pattern option zigzag"
 msgid "Zig Zag"
@@ -2751,6 +3018,11 @@ msgctxt "adhesion_type option raft"
 msgid "Raft"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "adhesion_type option none"
+msgid "None"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "adhesion_extruder_nr label"
 msgid "Build Plate Adhesion Extruder"
@@ -3198,6 +3470,30 @@ msgctxt "prime_tower_size description"
 msgid "The width of the prime tower."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "prime_tower_min_volume label"
+msgid "Prime Tower Minimum Volume"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_min_volume description"
+msgid ""
+"The minimum volume for each layer of the prime tower in order to purge "
+"enough material."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_wall_thickness label"
+msgid "Prime Tower Thickness"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "prime_tower_wall_thickness description"
+msgid ""
+"The thickness of the hollow prime tower. A thickness larger than half the "
+"Prime Tower Minimum Volume will result in a dense prime tower."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "prime_tower_position_x label"
 msgid "Prime Tower X Position"
@@ -3232,7 +3528,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "prime_tower_wipe_enabled label"
-msgid "Wipe Nozzle on Prime Tower"
+msgid "Wipe Inactive Nozzle on Prime Tower"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3243,15 +3539,16 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "multiple_mesh_overlap label"
+msgctxt "dual_pre_wipe label"
-msgid "Dual Extrusion Overlap"
+msgid "Wipe Nozzle After Switch"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "multiple_mesh_overlap description"
+msgctxt "dual_pre_wipe description"
 msgid ""
-"Make the models printed with different extruder trains overlap a bit. This "
+"After switching extruder, wipe the oozed material off of the nozzle on the "
-"makes the different materials bond together better."
+"first thing printed. This performs a safe slow wipe move at a place where "
+"the oozed material causes least harm to the surface quality of your print."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3308,8 +3605,9 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "meshfix_union_all description"
 msgid ""
-"Ignore the internal geometry arising from overlapping volumes and print the "
+"Ignore the internal geometry arising from overlapping volumes within a mesh "
-"volumes as one. This may cause internal cavities to disappear."
+"and print the volumes as one. This may cause unintended internal cavities to "
+"disappear."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3352,6 +3650,18 @@ msgid ""
 "everything else fails to produce proper GCode."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "multiple_mesh_overlap label"
+msgid "Merged Meshes Overlap"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "multiple_mesh_overlap description"
+msgid ""
+"Make meshes which are touching each other overlap a bit. This makes them "
+"bond together better."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "carve_multiple_volumes label"
 msgid "Remove Mesh Intersection"
@@ -3360,8 +3670,22 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "carve_multiple_volumes description"
 msgid ""
-"Remove areas where multiple objecs are overlapping with each other. This is "
+"Remove areas where multiple meshes are overlapping with each other. This may "
-"may be used if merged dual material objects overlap with each other."
+"be used if merged dual material objects overlap with each other."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "alternate_carve_order label"
+msgid "Alternate Mesh Removal"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "alternate_carve_order description"
+msgid ""
+"Switch to which mesh intersecting volumes will belong with every layer, so "
+"that the overlapping meshes become interwoven. Turning this setting off will "
+"cause one of the meshes to obtain all of the volume in the overlap, while it "
+"is removed from the other meshes."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3425,6 +3749,30 @@ msgid ""
 "lower order and normal meshes."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "support_mesh label"
+msgid "Support Mesh"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_mesh description"
+msgid ""
+"Use this mesh to specify support areas. This can be used to generate support "
+"structure."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "anti_overhang_mesh label"
+msgid "Anti Overhang Mesh"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "anti_overhang_mesh description"
+msgid ""
+"Use this mesh to specify where no part of the model should be detected as "
+"overhang. This can be used to remove unwanted support structure."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "magic_mesh_surface_mode label"
 msgid "Surface Mode"
@@ -3677,6 +4025,17 @@ msgid ""
 "Small widths can lead to unstable support structures."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "infill_hollow label"
+msgid "Hollow Out Objects"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_hollow description"
+msgid ""
+"Remove all infill and make the inside of the object eligible for support."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "magic_fuzzy_skin_enabled label"
 msgid "Fuzzy Skin"
@@ -4040,3 +4399,70 @@ msgid ""
 "which in turn results in less upward connections with the next layer. Only "
 "applies to Wire Printing."
 msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "command_line_settings label"
+msgid "Command Line Settings"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "command_line_settings description"
+msgid ""
+"Settings which are only used if CuraEngine isn't called from the Cura "
+"frontend."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "center_object label"
+msgid "Center object"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "center_object description"
+msgid ""
+"Whether to center the object on the middle of the build platform (0,0), "
+"instead of using the coordinate system in which the object was saved."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_x label"
+msgid "Mesh position x"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_x description"
+msgid "Offset applied to the object in the x direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_y label"
+msgid "Mesh position y"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_y description"
+msgid "Offset applied to the object in the y direction."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_z label"
+msgid "Mesh position z"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_position_z description"
+msgid ""
+"Offset applied to the object in the z direction. With this you can perform "
+"what was used to be called 'Object Sink'."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_rotation_matrix label"
+msgid "Mesh Rotation Matrix"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "mesh_rotation_matrix description"
+msgid ""
+"Transformation matrix to be applied to the model when loading it from file."
+msgstr ""

resources/i18n/fi/fdmextruder.def.json.po

@@ -3,10 +3,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-09-29 13:02+0200\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Suulakkeen aloitussijainti absoluuttinen"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "Tekee suulakkeen aloitussijainnista absoluuttisen eikä suhteellisen viimeksi tunnettuun pään sijaintiin nähden."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Suulakkeen lopetussijainti absoluuttinen"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "Tekee suulakkeen lopetussijainnista absoluuttisen eikä suhteellisen viimeksi tunnettuun pään sijaintiin nähden."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Suulakkeen esitäytön Z-sijainti"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Z-koordinaatti sijainnille, jossa suutin esitäytetään tulostusta aloitettaessa."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "Suulakkeen esitäytön X-sijainti"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "X-koordinaatti sijainnille, jossa suutin esitäytetään tulostusta aloitettaessa."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Suulakkeen esitäytön Y-sijainti"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Y-koordinaatti sijainnille, jossa suutin esitäytetään tulostusta aloitettaessa."

resources/i18n/fr/fdmextruder.def.json.po

@@ -3,10 +3,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-09-29 13:02+0200\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Extrudeuse Position de départ absolue"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "Rendre la position de départ de l'extrudeuse absolue plutôt que relative à la dernière position connue de la tête."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Extrudeuse Position de fin absolue"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "Rendre la position de fin de l'extrudeuse absolue plutôt que relative à la dernière position connue de la tête."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Extrudeuse Position d'amorçage Z"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Les coordonnées Z de la position à laquelle la buse s'amorce au début de l'impression."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "Extrudeuse Position d'amorçage X"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Les coordonnées X de la position à laquelle la buse s'amorce au début de l'impression."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Extrudeuse Position d'amorçage Y"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Les coordonnées Y de la position à laquelle la buse s'amorce au début de l'impression."

resources/i18n/it/fdmextruder.def.json.po

@@ -3,10 +3,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-09-29 13:02+0200\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Assoluto posizione avvio estrusore"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "Rende la posizione di partenza estrusore assoluta anziché relativa rispetto all’ultima posizione nota della testina."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Assoluto posizione fine estrusore"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "Rende la posizione di fine estrusore assoluta anziché relativa rispetto all’ultima posizione nota della testina."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Posizione Z innesco estrusore"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Indica la coordinata Z della posizione in cui l’ugello si innesca all’avvio della stampa."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "Posizione X innesco estrusore"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "La coordinata X della posizione in cui l’ugello si innesca all’avvio della stampa."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Posizione Y innesco estrusore"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "La coordinata Y della posizione in cui l’ugello si innesca all’avvio della stampa."

resources/i18n/nl/fdmextruder.def.json.po

@@ -2,11 +2,12 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
-"Report-Msgid-Bugs-To: http://github.com/Ultimaker/Cura\n"
+"Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-10-11 16:05+0200\n"
 "Last-Translator: Ruben Dulek <r.dulek@ultimaker.com>\n"
 "Language-Team: Ultimaker\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Absolute Startpositie Extruder"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "Maak van de startpositie van de extruder de absolute startpositie, in plaats van de relatieve startpositie ten opzichte van de laatst bekende locatie van de printkop."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Absolute Eindpositie Extruder"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "Maak van de eindpositie van de extruder de absolute eindpositie, in plaats van de relatieve eindpositie ten opzichte van de laatst bekende locatie van de printkop."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Z-positie voor Primen Extruder"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "De Z-coördinaat van de positie waar filament in de nozzle wordt geprimet aan het begin van het printen."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "X-positie voor Primen Extruder"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "De X-coördinaat van de positie waar filament in de nozzle wordt geprimet aan het begin van het printen."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Y-positie voor Primen Extruder"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "De Y-coördinaat van de positie waar filament in de nozzle wordt geprimet aan het begin van het printen."

resources/i18n/tr/fdmextruder.def.json.po

@@ -3,10 +3,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
-"POT-Creation-Date: 2016-09-20 17:35+0000\n"
+"POT-Creation-Date: 2016-12-28 10:51+0000\n"
 "PO-Revision-Date: 2016-09-29 13:02+0200\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -68,9 +69,7 @@ msgstr "Ekstruderin Mutlak Başlangıç Konumu"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_start_pos_abs description"
-msgid ""
+msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
-"Make the extruder starting position absolute rather than relative to the "
-"last-known location of the head."
 msgstr "Ekstruder başlama konumunu, yazıcı başlığının son konumuna göre ayarlamak yerine mutlak olarak ayarlayın."
 
 #: fdmextruder.def.json
@@ -110,9 +109,7 @@ msgstr "Ekstruderin Mutlak Bitiş Konumu"
 
 #: fdmextruder.def.json
 msgctxt "machine_extruder_end_pos_abs description"
-msgid ""
+msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
-"Make the extruder ending position absolute rather than relative to the last-"
-"known location of the head."
 msgstr "Ekstruder bitiş konumunu, yazıcı başlığının son konumuna göre ayarlamak yerine mutlak olarak ayarlayın."
 
 #: fdmextruder.def.json
@@ -142,9 +139,7 @@ msgstr "Ekstruder İlk Z konumu"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_z description"
-msgid ""
+msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
-"The Z coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Nozül yazdırma işlemini başlatmaya hazırlandığında konumun Z koordinatı."
 
 #: fdmextruder.def.json
@@ -164,9 +159,7 @@ msgstr "Extruder İlk X konumu"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_x description"
-msgid ""
+msgid "The X coordinate of the position where the nozzle primes at the start of printing."
-"The X coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Nozül yazdırma işlemini başlatmaya hazırlandığında konumun X koordinatı."
 
 #: fdmextruder.def.json
@@ -176,7 +169,5 @@ msgstr "Extruder İlk Y konumu"
 
 #: fdmextruder.def.json
 msgctxt "extruder_prime_pos_y description"
-msgid ""
+msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
-"The Y coordinate of the position where the nozzle primes at the start of "
-"printing."
 msgstr "Nozül yazdırma işlemini başlatmaya hazırlandığında konumun Y koordinatı."