Merge pull request #18063 from Ultimaker/PP-391-High-speed-modes-small-layer-heights

PP-391 high speed modes small layer heights

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_engineering.inst.cfg

@@ -12,9 +12,13 @@ type = intent
 variant = AA 0.4
 
 [values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
 jerk_print = 30
 speed_infill = =speed_print
-speed_print = 30
+speed_print = 35
+speed_roofing = =speed_topbottom
 speed_topbottom = =speed_print
 speed_wall = =speed_print
 speed_wall_0 = =speed_wall

resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm_visual.inst.cfg

@@ -12,6 +12,14 @@ type = intent
 variant = AA 0.4
 
 [values]
-speed_infill = 50
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 0.5
-top_bottom_thickness = 1.05
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(20/50))
+speed_wall_x = =math.ceil(speed_wall*(35/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
 

resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg

@@ -12,11 +12,62 @@ variant = AA 0.25
 weight = 0
 
 [values]
-cool_fan_speed_0 = 0
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-material_print_temperature = =default_material_print_temperature - 20
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.8
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 6.5
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg

@@ -12,12 +12,61 @@ variant = AA 0.25
 weight = 0
 
 [values]
-material_print_temperature = =default_material_print_temperature - 15
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-speed_infill = =math.ceil(speed_print * 40 / 55)
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.4
+machine_nozzle_heat_up_speed = 1.7
+material_extrusion_cool_down_speed = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 0.8
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg

@@ -12,21 +12,62 @@ variant = AA 0.25
 weight = 0
 
 [values]
-brim_width = 8
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
-machine_nozzle_cool_down_speed = 0.9
+infill_sparse_density = 15
-machine_nozzle_heat_up_speed = 1.4
+jerk_infill = =jerk_print
-material_print_temperature = =default_material_print_temperature - 10
+jerk_layer_0 = =jerk_wall_0
-retraction_hop = 0.2
+jerk_print = =max(30, speed_print/2)
-speed_print = 30
+jerk_roofing = =jerk_wall_0
-speed_wall = =math.ceil(speed_print * 25 / 30)
+jerk_topbottom = =jerk_wall
-speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 0.72
+top_bottom_thickness = =max(1 , layer_height * 5)
-travel_avoid_distance = 0.4
+wall_0_wipe_dist = 0.8
-wall_0_inset = 0.015
+z_seam_relative = True
-wall_0_wipe_dist = 0.25
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 1
 
 [values]
-machine_nozzle_cool_down_speed = 0.8
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_final_print_temperature = =material_print_temperature - 20
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 10
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.8
+material_max_flowrate = 20
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-speed_infill = =math.ceil(speed_print * 40 / 50)
+retraction_amount = 6.5
-speed_print = 50
+retraction_prime_speed = 15
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
+retraction_speed = 45
-speed_wall = =math.ceil(speed_print * 30 / 50)
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 0
 
 [values]
-machine_nozzle_cool_down_speed = 0.85
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_final_print_temperature = =material_print_temperature - 20
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 5
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.8
+material_max_flowrate = 20
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-speed_infill = =math.ceil(speed_print * 40 / 55)
+retraction_amount = 6.5
-speed_print = 55
+retraction_prime_speed = 15
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+retraction_speed = 45
-speed_wall = =math.ceil(speed_print * 30 / 55)
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg

@@ -12,16 +12,62 @@ variant = AA 0.4
 weight = 1
 
 [values]
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_cool_down_speed = 0.85
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 10
+acceleration_infill = =acceleration_print
-speed_infill = =math.ceil(speed_print * 40 / 50)
+acceleration_ironing = 1000
-speed_print = 50
+acceleration_layer_0 = =acceleration_wall_0
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
+acceleration_print = 3500
-speed_wall = =math.ceil(speed_print * 30 / 50)
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.4
+machine_nozzle_heat_up_speed = 1.7
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 20
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm.inst.cfg

@@ -12,16 +12,62 @@ variant = AA 0.4
 weight = 0
 
 [values]
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_cool_down_speed = 0.85
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 5
+acceleration_infill = =acceleration_print
-speed_infill = =math.ceil(speed_print * 45 / 55)
+acceleration_ironing = 1000
-speed_print = 55
+acceleration_layer_0 = =acceleration_wall_0
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+acceleration_print = 3500
-speed_wall = =math.ceil(speed_print * 30 / 55)
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.4
+machine_nozzle_heat_up_speed = 1.7
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 20
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 1
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_print_temperature = =default_material_print_temperature - 5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 12
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
-speed_print = 50
+retraction_speed = 45
-speed_topbottom = =math.ceil(speed_print * 35 / 50)
+small_skin_on_surface = False
-speed_wall = =math.ceil(speed_print * 35 / 50)
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg

@@ -12,14 +12,63 @@ variant = AA 0.4
 weight = 0
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 12
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 1
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_print_temperature = =default_material_print_temperature - 5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 14
+optimize_wall_printing_order = False
 prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
-speed_print = 45
+retraction_speed = 45
-speed_topbottom = =math.ceil(speed_print * 35 / 45)
+small_skin_on_surface = False
-speed_wall = =math.ceil(speed_print * 40 / 45)
+small_skin_width = 4
-speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 26
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1.2
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 0
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_print_temperature = =default_material_print_temperature - 5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 14
+optimize_wall_printing_order = False
 prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
-speed_print = 45
+retraction_speed = 45
-speed_topbottom = =math.ceil(speed_print * 35 / 45)
+small_skin_on_surface = False
-speed_wall = =math.ceil(speed_print * 40 / 45)
+small_skin_width = 4
-speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 26
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1.2
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg

@@ -12,11 +12,62 @@ variant = AA 0.25
 weight = 0
 
 [values]
-cool_fan_speed_0 = 0
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-material_print_temperature = =default_material_print_temperature - 20
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.8
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.15
+retraction_amount = 6.5
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.25_um-petg_0.1mm.inst.cfg

@@ -12,12 +12,61 @@ variant = AA 0.25
 weight = 0
 
 [values]
-material_print_temperature = =default_material_print_temperature - 15
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-speed_infill = =math.ceil(speed_print * 40 / 55)
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.4
+machine_nozzle_heat_up_speed = 1.7
+material_extrusion_cool_down_speed = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 0.8
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg

@@ -12,21 +12,62 @@ variant = AA 0.25
 weight = 0
 
 [values]
-brim_width = 8
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
-machine_nozzle_cool_down_speed = 0.9
+infill_sparse_density = 15
-machine_nozzle_heat_up_speed = 1.4
+jerk_infill = =jerk_print
-material_print_temperature = =default_material_print_temperature - 10
+jerk_layer_0 = =jerk_wall_0
-retraction_hop = 0.2
+jerk_print = =max(30, speed_print/2)
-speed_print = 30
+jerk_roofing = =jerk_wall_0
-speed_wall = =math.ceil(speed_print * 25 / 30)
+jerk_topbottom = =jerk_wall
-speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 0.72
+top_bottom_thickness = =max(1 , layer_height * 5)
-travel_avoid_distance = 0.4
+wall_0_wipe_dist = 0.8
-wall_0_inset = 0.015
+z_seam_relative = True
-wall_0_wipe_dist = 0.25
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 1
 
 [values]
-machine_nozzle_cool_down_speed = 0.8
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_final_print_temperature = =material_print_temperature - 20
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 10
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.8
+material_max_flowrate = 20
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-speed_infill = =math.ceil(speed_print * 40 / 50)
+retraction_amount = 6.5
-speed_print = 50
+retraction_prime_speed = 15
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
+retraction_speed = 45
-speed_wall = =math.ceil(speed_print * 30 / 50)
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 0
 
 [values]
-machine_nozzle_cool_down_speed = 0.85
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_final_print_temperature = =material_print_temperature - 20
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 5
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.8
+material_max_flowrate = 20
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-speed_infill = =math.ceil(speed_print * 40 / 55)
+retraction_amount = 6.5
-speed_print = 55
+retraction_prime_speed = 15
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+retraction_speed = 45
-speed_wall = =math.ceil(speed_print * 30 / 55)
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.06mm.inst.cfg

@@ -12,16 +12,62 @@ variant = AA 0.4
 weight = 1
 
 [values]
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_cool_down_speed = 0.85
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 10
+acceleration_infill = =acceleration_print
-speed_infill = =math.ceil(speed_print * 40 / 50)
+acceleration_ironing = 1000
-speed_print = 50
+acceleration_layer_0 = =acceleration_wall_0
-speed_topbottom = =math.ceil(speed_print * 30 / 50)
+acceleration_print = 3500
-speed_wall = =math.ceil(speed_print * 30 / 50)
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.4
+machine_nozzle_heat_up_speed = 1.7
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 20
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.1mm.inst.cfg

@@ -12,16 +12,62 @@ variant = AA 0.4
 weight = 0
 
 [values]
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_cool_down_speed = 0.85
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-machine_nozzle_heat_up_speed = 1.5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-material_print_temperature = =default_material_print_temperature - 5
+acceleration_infill = =acceleration_print
-speed_infill = =math.ceil(speed_print * 45 / 55)
+acceleration_ironing = 1000
-speed_print = 55
+acceleration_layer_0 = =acceleration_wall_0
-speed_topbottom = =math.ceil(speed_print * 30 / 55)
+acceleration_print = 3500
-speed_wall = =math.ceil(speed_print * 30 / 55)
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 4
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.4
+machine_nozzle_heat_up_speed = 1.7
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 20
+optimize_wall_printing_order = False
+prime_tower_enable = False
+retraction_amount = 8
+retraction_prime_speed = 15
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 1
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_print_temperature = =default_material_print_temperature - 5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 12
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
-speed_print = 50
+retraction_speed = 45
-speed_topbottom = =math.ceil(speed_print * 35 / 50)
+small_skin_on_surface = False
-speed_wall = =math.ceil(speed_print * 35 / 50)
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg

@@ -12,14 +12,63 @@ variant = AA 0.4
 weight = 0
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 12
+optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 30
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 1
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_print_temperature = =default_material_print_temperature - 5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 14
+optimize_wall_printing_order = False
 prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
-speed_print = 45
+retraction_speed = 45
-speed_topbottom = =math.ceil(speed_print * 35 / 45)
+small_skin_on_surface = False
-speed_wall = =math.ceil(speed_print * 40 / 45)
+small_skin_width = 4
-speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 26
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1.2
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg

@@ -12,18 +12,63 @@ variant = AA 0.4
 weight = 0
 
 [values]
-machine_nozzle_cool_down_speed = 0.75
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
-machine_nozzle_heat_up_speed = 1.6
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
-material_print_temperature = =default_material_print_temperature - 5
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+material_max_flowrate = 14
+optimize_wall_printing_order = False
 prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
-speed_print = 45
+retraction_speed = 45
-speed_topbottom = =math.ceil(speed_print * 35 / 45)
+small_skin_on_surface = False
-speed_wall = =math.ceil(speed_print * 40 / 45)
+small_skin_width = 4
-speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 26
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 1.2
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True