Update TPU profiles

These profiles are improved by the materials team. This is directly copied from them and should now be optimised for our use.

Contributes to issue CURA-3960.

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -29,11 +29,11 @@ jerk_print = 25
 layer_height = 0.2
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
@@ -43,8 +43,8 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = False
+retraction_hop = 1.5
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -61,7 +61,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -29,11 +29,11 @@ jerk_print = 25
 layer_height = 0.15
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
@@ -44,8 +44,8 @@ retraction_amount = 7
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = False
+retraction_hop = 1.5
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -62,7 +62,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -28,11 +28,11 @@ jerk_enabled = True
 jerk_print = 25
 line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.85
-machine_nozzle_heat_up_speed = 1.5
-material_final_print_temperature = =material_print_temperature - 10
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 106
-material_initial_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
@@ -41,8 +41,8 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
-retraction_hop = 2
-retraction_hop_enabled = False
+retraction_hop = 1.5
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -59,7 +59,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 wall_0_inset = 0
 wall_line_width_x = =line_width
 wall_thickness = 0.76

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -25,8 +25,12 @@ infill_sparse_density = 80
 jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
 material_bed_temperature_layer_0 = 0
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
@@ -37,8 +41,8 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
-retraction_hop = 0.5
-retraction_hop_enabled = False
+retraction_hop = 1.5
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -56,7 +60,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -26,8 +26,12 @@ jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.4
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
 material_bed_temperature_layer_0 = 0
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
@@ -38,8 +42,8 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
-retraction_hop = 0.5
-retraction_hop_enabled = False
+retraction_hop = 1.5
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -57,7 +61,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -26,8 +26,12 @@ jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
 jerk_support = =math.ceil(jerk_print * 25 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
 material_bed_temperature_layer_0 = 0
+material_final_print_temperature = =material_print_temperature - 21
 material_flow = 105
+material_initial_print_temperature = =material_print_temperature - 16
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
@@ -37,8 +41,8 @@ prime_tower_wall_thickness = =prime_tower_line_width * 2
 retract_at_layer_change = False
 retraction_count_max = 12
 retraction_extra_prime_amount = 0.5
-retraction_hop = 0.5
-retraction_hop_enabled = False
+retraction_hop = 1.5
+retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 0.8
 retraction_prime_speed = 15
@@ -56,7 +60,7 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
-travel_avoid_distance = 0.5
+travel_avoid_distance = 1.5
 travel_compensate_overlapping_walls_0_enabled = False
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)