Update translation-template with bundled engine-plugin settings.

Will need to be handled more elegantly later. Put it here manually for now, so we can at least start the translation process.

resources/i18n/cs_CZ/fdmprinter.def.json.po

@@ -5387,6 +5387,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "cestování"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_with_fans_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps included)."
 #~ msgstr "2D silueta tiskové hlavy (včetně krytů ventilátoru)."

resources/i18n/de_DE/fdmprinter.def.json.po

@@ -5384,6 +5384,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "Bewegungen"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Versatz, der auf die Löcher in jeder Schicht angewandt wird. Bei positiven Werten werden die Löcher vergrößert; bei negativen Werten werden die Löcher verkleinert."

resources/i18n/es_ES/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "desplazamiento"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Cantidad de desplazamiento aplicado a todos los orificios en cada capa. Los valores positivos aumentan el tamaño de los orificios y los valores negativos reducen el tamaño de los mismos."

resources/i18n/fdmprinter.def.json.pot

@@ -5372,3 +5372,46 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr ""
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""

resources/i18n/fi_FI/fdmprinter.def.json.po

@@ -5386,6 +5386,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "siirtoliike"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "2D-siluetti tulostuspäästä (tuulettimen kannattimet pois lukien)"

resources/i18n/fr_FR/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "déplacement"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Le décalage appliqué à tous les trous dans chaque couche. Les valeurs positives augmentent la taille des trous ; les valeurs négatives réduisent la taille des trous."

resources/i18n/hu_HU/fdmprinter.def.json.po

@@ -5398,6 +5398,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "fej átpozícionálás"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "A nyomtatófej 2D -s árnyéka (ventillátor nélkül)."

resources/i18n/it_IT/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "spostamenti"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Entità di offset applicato a tutti i fori di ciascuno strato. Valori positivi aumentano le dimensioni dei fori, mentre valori negativi le riducono."

resources/i18n/ja_JP/fdmprinter.def.json.po

@@ -5388,6 +5388,54 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "移動"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "各穴のすべてのポリゴンに適用されるオフセットの量。正の値は穴のサイズを大きくします。負の値は穴のサイズを小さくします。"

resources/i18n/ko_KR/fdmprinter.def.json.po

@@ -5384,6 +5384,51 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "이동"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "각 레이어의 모든 구멍에 적용된 오프셋의 양. 양수 값은 구멍 크기를 증가시키며, 음수 값은 구멍 크기를 줄입니다."

resources/i18n/nl_NL/fdmprinter.def.json.po

@@ -5384,6 +5384,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "beweging"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "De offset die wordt toegepast op alle gaten in elke laag. Met positieve waarden worden de gaten groter, met negatieve waarden worden de gaten kleiner."

resources/i18n/pl_PL/fdmprinter.def.json.po

@@ -5397,6 +5397,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "ruch jałowy"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "Sylwetka 2D głowicy drukującej (bez nasadki wentylatora)."

resources/i18n/pt_BR/fdmprinter.def.json.po

@@ -5398,6 +5398,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "percurso"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "Uma silhueta 2D da cabeça de impressão (sem os suportes de ventoinhas)."

resources/i18n/pt_PT/fdmprinter.def.json.po

@@ -5384,6 +5384,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "deslocação"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Quantidade de desvio aplicado a todos os buracos em cada camada. Valores positivos aumentam o tamanho dos buracos; valores negativos reduzem o tamanho dos buracos."

resources/i18n/ru_RU/fdmprinter.def.json.po

@@ -5384,6 +5384,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "перемещение"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Смещение, применяемое ко всем отверстиям в каждом слое. Положительные значения увеличивают размер отверстий; отрицательные значения уменьшают размер отверстий."

resources/i18n/tr_TR/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "hareket"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Her bir katmandaki tüm deliklere uygulanan ofset miktarıdır. Pozitif değerler deliklerin boyutunu artırırken, negatif değerler deliklerin boyutunu düşürür."

resources/i18n/zh_CN/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "空驶"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "应用到每一层中所有孔洞的偏移量。正数值可以补偿过大的孔洞，负数值可以补偿过小的孔洞。"

resources/i18n/zh_TW/fdmprinter.def.json.po

@@ -5398,6 +5398,51 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "空跑"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "列印頭 2D 輪廓圖（不包含風扇蓋）。"