Add PETG quality profiles

CURA-8200

resources/definitions/ultimaker.def.json

@@ -6,7 +6,7 @@
         "author": "Ultimaker",
         "manufacturer": "Ultimaker B.V.",
         "visible": false,
-        "exclude_materials": [ "generic_hips", "generic_petg", "structur3d_dap100silicone" ]
+        "exclude_materials": [ "generic_hips", "structur3d_dap100silicone" ]
     },
     "overrides": {
         "machine_max_feedrate_e": {

resources/definitions/ultimaker2.def.json

@@ -18,7 +18,8 @@
         {
             "0": "ultimaker2_extruder_0"
         },
-        "firmware_file": "MarlinUltimaker2.hex"
+        "firmware_file": "MarlinUltimaker2.hex",
+        "exclude_materials": [ "generic_hips", "generic_petg", "structur3d_dap100silicone", "ultimaker_petg_red", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent"]
     },
     "overrides": {
         "machine_name": { "default_value": "Ultimaker 2" },

resources/definitions/ultimaker3.def.json

@@ -13,7 +13,7 @@
         "has_machine_quality": true,
         "has_materials": true,
         "has_variants": true,
-        "exclude_materials": [ "generic_hips", "generic_petg", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
+        "exclude_materials": [ "generic_hips", "generic_petg", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent"  ],
         "preferred_variant_name": "AA 0.4",
         "preferred_quality_type": "normal",
         "variants_name": "Print core",

resources/definitions/ultimaker_original.def.json

@@ -11,7 +11,7 @@
         "platform": "ultimaker_platform.3mf",
         "has_materials": true,
         "has_machine_quality": true,
-        "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
+        "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent"  ],
         "first_start_actions": ["UMOUpgradeSelection", "BedLevel"],
         "supported_actions": ["UMOUpgradeSelection", "BedLevel"],
         "machine_extruder_trains":

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_petg
+variant = 0.25 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.2
+cool_min_layer_time = 2
+cool_min_layer_time_fan_speed_max = 25
+cool_min_speed = 15
+infill_sparse_density = 20
+speed_layer_0 = 30
+speed_print = 30
+top_bottom_thickness = 0.72
+wall_thickness = 0.88
+retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = 30
+speed_print = 45
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 40 / 45)
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
+speed_wall_0 = =math.ceil(speed_print * 30 / 45)
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
+retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = 30
+speed_print = 45
+speed_travel = 150
+speed_wall = =math.ceil(speed_print * 40 / 45)
+top_bottom_thickness = 0.75
+wall_thickness = 0.7
+speed_wall_0 = =math.ceil(speed_print * 30 / 45)
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall_x = =math.ceil(speed_print * 40 / 45)
+speed_infill = =math.ceil(speed_print * 45 / 45)
+retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg

@@ -0,0 +1,25 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 10
+infill_sparse_density = 20
+speed_layer_0 = 30
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 30 / 45)
+top_bottom_thickness = 0.8
+wall_thickness = 1.05
+retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = 0
+material = generic_petg
+variant = 0.6 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 8
+infill_sparse_density = 20
+speed_layer_0 = 30
+speed_print = 40
+top_bottom_thickness = 1.2
+wall_thickness = 1.59
+retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker2_plus_connect
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_petg
+variant = 0.8 mm
+
+[values]
+cool_fan_speed_min = =cool_fan_speed * 0.8
+cool_min_layer_time = 3
+cool_min_layer_time_fan_speed_max = 25
+cool_min_speed = 8
+infill_sparse_density = 20
+speed_layer_0 = 30
+speed_print = 40
+top_bottom_thickness = 1.2
+wall_thickness = 2.1
+retraction_combing_max_distance = 50

resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = AA 0.25
+
+[values]
+retraction_combing_max_distance = 50
+retraction_extrusion_window = 0.5
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+top_bottom_thickness = 0.8
+wall_thickness = 0.92
+initial_layer_line_width_factor = 100
+infill_before_walls = true 
+material_print_temperature = =default_material_print_temperature - 5

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = AA 0.4
+
+[values]
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 5
+retraction_combing_max_distance = 50
+skin_overlap = 20
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 35 / 60)
+speed_wall = =math.ceil(speed_print * 45 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+wall_thickness = 1
+
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 50 / 60)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_petg
+variant = AA 0.4
+
+[values]
+cool_min_speed = 7
+material_print_temperature = =default_material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+retraction_combing_max_distance = 50
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_wall = =math.ceil(speed_print * 40 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 50 / 60)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg

@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_petg
+variant = AA 0.4
+
+[values]
+cool_min_speed = 12
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 15
+retraction_combing_max_distance = 50
+speed_print = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 40 / 50)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = AA 0.4
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 15
+retraction_combing_max_distance = 50
+speed_print = 55
+speed_layer_0 = =math.ceil(speed_print * 20 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 45 / 55)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = AA 0.8
+
+[values]
+brim_width = 7
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+jerk_travel = 50
+cool_fan_speed = 20
+initial_layer_line_width_factor = 100
+infill_before_walls = true 

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Sprint
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_petg
+variant = AA 0.8
+
+[values]
+brim_width = 7
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+jerk_travel = 50
+cool_fan_speed = 20 
+initial_layer_line_width_factor = 100
+infill_before_walls = true 

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Extra Fast
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_petg
+variant = AA 0.8
+
+[values]
+brim_width = 7
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+jerk_travel = 50
+cool_fan_speed = 20
+layer_height_0 = 0.27
+initial_layer_line_width_factor = 100
+infill_before_walls = true 

resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -0,0 +1,23 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = AA 0.25
+
+[values]
+retraction_combing_max_distance = 50
+retraction_extrusion_window = 0.5
+speed_infill = =math.ceil(speed_print * 40 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+top_bottom_thickness = 0.8
+wall_thickness = 0.92
+initial_layer_line_width_factor = 100
+infill_before_walls = true 
+material_print_temperature = =default_material_print_temperature - 5

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = AA 0.4
+
+[values]
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature - 5
+retraction_combing_max_distance = 50
+skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
+skin_overlap = 20
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 35 / 60)
+speed_wall = =math.ceil(speed_print * 45 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+top_thickness = =0.8 if infill_sparse_density < 30 and skin_edge_support_thickness == 0.8 else top_bottom_thickness
+wall_thickness = 1
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 50 / 60)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_petg
+variant = AA 0.4
+
+[values]
+cool_min_speed = 7
+material_print_temperature = =default_material_print_temperature
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+retraction_combing_max_distance = 50
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_wall = =math.ceil(speed_print * 40 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 50 / 60)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg

@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Extra Fine
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_petg
+variant = AA 0.4
+
+[values]
+cool_min_speed = 12
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 15
+retraction_combing_max_distance = 50
+speed_print = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 40 / 50)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = AA 0.4
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 10
+material_final_print_temperature = =material_print_temperature - 15
+retraction_combing_max_distance = 50
+speed_print = 55
+speed_layer_0 = =math.ceil(speed_print * 20 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 45 / 55)
+initial_layer_line_width_factor = 100

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = AA 0.8
+
+[values]
+brim_width = 7
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+jerk_travel = 50
+cool_fan_speed = 20
+initial_layer_line_width_factor = 100
+infill_before_walls = true 

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Sprint
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_petg
+variant = AA 0.8
+
+[values]
+brim_width = 7
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+jerk_travel = 50
+cool_fan_speed = 20
+initial_layer_line_width_factor = 100
+infill_before_walls = true 

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Extra Fast
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_petg
+variant = AA 0.8
+
+[values]
+brim_width = 7
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+jerk_travel = 50
+cool_fan_speed = 20
+initial_layer_line_width_factor = 100
+infill_before_walls = true