Alan Bjorklund
2ab0482fb4
Add intent profiles for Method High Speed
...
These intent modes were tuned by Eric MacNeil. The jerk &
accel values will be converted into a accel_config by the
Makerbot writer plugin, and the Method firmware will interpret
these values for each path.
The self support speed settings were unchanged from the previous
defaults, but the model speed was increased for ABSR, PLA & TPLA.
PP-544
2025-01-14 18:04:03 -05:00
Paul Kuiper
de3613e92f
Fix warning issue Method machines with BASF Metal filament.
...
PP-541
2024-11-18 14:34:41 +01:00
c.lamboo
5be6e56441
Revert "Fix warning issue Method machines with BASF Metal filament."
...
This reverts commit bd6cf743a4a1aeb161f17c402e15f37391d57498.
2024-11-18 14:32:30 +01:00
Paul Kuiper
bd6cf743a4
Fix warning issue Method machines with BASF Metal filament.
...
PP-541
2024-11-18 14:30:34 +01:00
Erwan MATHIEU
5ef569d8ce
Set only UM variants name as being translated
...
CURA-12255
Also applied some consistency between labels, so that they are more consistent and more printers get their variants name translated.
2024-11-06 10:55:43 +01:00
HellAholic
b98744c0e7
Merge pull request #19763 from Ultimaker/PP-533-Small-corrections-for-5.9-Stable
...
Small corrections for 5.9 Stable
2024-10-21 13:08:08 +02:00
pkuiper-ultimaker
d7d25d0432
Applied printer-linter format
2024-10-18 09:44:30 +00:00
Paul Kuiper
ba77d0fcbc
Turn on prime tower by default for the Method machines (if > 1 extruders)
2024-10-18 11:43:19 +02:00
Paul Kuiper
8a39389186
Rebased on top of Cura 5.9
...
PP-533
2024-10-16 11:22:34 +02:00
Paul Kuiper
476ddf16dc
Using the new cool_during_extruder_switch feature to switch the Method fans on and off during nozzle switching.
...
PP-530
2024-10-14 11:27:11 +02:00
wawanbreton
c2c3419502
Applied printer-linter format
2024-10-02 06:57:13 +00:00
Erwan MATHIEU
d1b889b96c
Re-apply disallowed areas and build area fixes
...
CURA-12165
2024-10-02 08:56:18 +02:00
Alan Bjorklund
85c7fede7e
update method extruder start gcode, exclude all generic materials
...
PP-511
2024-10-01 11:49:18 -04:00
wawanbreton
8e5a766193
Applied printer-linter format
2024-10-01 08:49:25 +00:00
Erwan MATHIEU
4f0c77e16a
Fix disallowed areas definition conflict
...
CURA-12165
2024-10-01 10:48:27 +02:00
Alan Bjorklund
523214912b
remove redundant values from Tough PLA 175 quality file, standardize skirt values in method base definition file
...
PP-511
2024-09-27 18:01:03 -04:00
alanbjorklund
557755321f
Applied printer-linter format
2024-09-27 21:12:54 +00:00
alanbjorklund
2532945486
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 17:11:37 -04:00
alanbjorklund
fb95341fd4
Applied printer-linter format
2024-09-27 19:11:05 +00:00
alanbjorklund
e086772f47
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 15:09:45 -04:00
Alan Bjorklund
89066d19e5
removed more redundant values
...
PP-511
2024-09-27 15:05:46 -04:00
Alan Bjorklund
355715474a
Corrected a typo in solid intent files, and removed redundant values from method base definition file
...
PP-511
2024-09-27 14:55:06 -04:00
alanbjorklund
531c85f3c0
Applied printer-linter format
2024-09-27 18:41:46 +00:00
alanbjorklund
9a5e5443e1
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:40:34 -04:00
alanbjorklund
fd29ed6eb7
Applied printer-linter format
2024-09-27 18:39:57 +00:00
alanbjorklund
d0956347ff
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:38:43 -04:00
alanbjorklund
ab44d8781c
Applied printer-linter format
2024-09-27 18:28:51 +00:00
alanbjorklund
077a922a6d
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:27:16 -04:00
alanbjorklund
df5c502bc9
Applied printer-linter format
2024-09-27 18:26:27 +00:00
alanbjorklund
e3f822b0aa
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:25:13 -04:00
Alan Bjorklund
35ccd63e29
Method printers: Adding new materials (Tough PLA, PETG, NylonCF, ABS) and updated profiles for 5.9
...
PP-511
2024-09-26 15:35:56 -04:00
HellAholic
ad12851426
Applied printer-linter format
2024-07-31 09:34:34 +00:00
HellAholic
1ac563119e
Add raft_base_thickness dependency
...
For raft_interface_z_offset, raft_interface_line_spacing, and raft_interface_z_offset
2024-07-31 11:32:59 +02:00
HellAholic
4be2d22fa9
Applied printer-linter format
2024-07-31 08:07:45 +00:00
HellAholic
eb80d84da8
comma
2024-07-31 10:06:31 +02:00
HellAholic
1f1f9ee5e7
Apply PPM review
...
raft_base_line_spacing depends on raft_interface_extruder_nr
cool_fan_enabled depends on support_extruder_nr
raft_base_thickness not only depends on raft_interface_extruder_nr but also on support_extruder_nr
2024-07-31 09:58:25 +02:00
HellAholic
c3a74c07b9
Applied printer-linter format
2024-07-30 14:49:28 +00:00
HellAholic
dca373735e
Add other dependencies and update condition
2024-07-30 16:47:59 +02:00
HellAholic
0c09490d36
Applied printer-linter format
2024-07-30 12:28:20 +00:00
HellAholic
6ec660e974
Add removed value during linter to raft_interface_line_width
2024-07-30 14:26:35 +02:00
HellAholic
e2d1381ceb
Applied printer-linter format
2024-07-30 12:20:35 +00:00
HellAholic
3a76f7e0ac
Add force update to method base def
2024-07-30 14:17:18 +02:00
HellAholic
162f9e5f62
Revert "Move the changes to the method base definition"
...
This reverts commit 96b5833035be1a5b856aaf3d74458864f10fa39b.
2024-07-30 14:13:37 +02:00
HellAholic
96b5833035
Move the changes to the method base definition
2024-07-30 14:10:44 +02:00
Paul Kuiper
f4d9dcc840
Changed the support_interface_offset from '=support_offset' to 1 for self support of all Method materials. This value is 0 for the support materials (PVA, SR30, Rapid)
...
PP-504
2024-07-24 18:15:09 +02:00
Paul Kuiper
3800c4b574
* Fix z distance Method PVA from 0.4 to 0 and interface line width from 0.25mm to 0.4mm
...
* Set seam position to sharpest corner + smart hiding (all Ultimaker machines, [not affecting Method machines, was already set to this])
* Enable Use support towers for Method supports materials and all Ultimaker materials, disable for Method model materials.
* Interface support horizontal expansion: 0mm for all Method support materials
PP-504
2024-07-24 11:50:36 +02:00
Remco Burema
a027307743
Revert "* Fix z distance Method PVA from 0.4 to 0 and interface line width from 0.25mm to 0.4mm"
...
This reverts commit bc95ae1009ef3297aea1a6685a39b75e9ba87a75.
2024-07-24 11:44:27 +02:00
Paul Kuiper
bc95ae1009
* Fix z distance Method PVA from 0.4 to 0 and interface line width from 0.25mm to 0.4mm
...
* Set seam position to sharpest corner + smart hiding (all Ultimaker machines, [not affecting Method machines, was already set to this])
* Enable Use support towers for Method supports materials and all Ultimaker materials, disable for Method model materials.
* Interface support horizontal expansion: 0mm for all Method support materials
PP-504
2024-07-24 11:37:35 +02:00
wawanbreton
a215ec4f1a
Applied printer-linter format
2024-07-15 13:12:34 +00:00
Erwan MATHIEU
b6defced68
Remove unnecessarily overridden setting
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-07-15 15:11:19 +02:00
