GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-10-04 06:46:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
35,567 Commits 295 Branches 268 Tags
Commit Graph

103 Commits

Author SHA1 Message Date
Paul Kuiper
baefd3e4b6 Excluded material from certain machines (e.g. PPS-CF and Nylon) 2024-10-07 13:57:37 +02:00
Erwan MATHIEU
0d805df711 Set layer_start_x/y to a safer value 
Also remove all the definitions that had exactly this value as an override.

CURA-11947
 2024-06-25 17:09:51 +02:00
Casper Lamboo
8e61996ced
Remove wildcards from definition files 2024-03-07 16:07:15 +01:00
Paul Kuiper
a2dcce9d50 Cleanup exclude lists. 
Relates to PP-441
 2024-03-01 14:46:13 +01:00
Paul Kuiper
709e362ffa Cleanup and extention of exclude lists. Protection of PEI flex plate against high probe and first layer temperature. 
Relates to PP-441
 2024-03-01 09:46:29 +01:00
c.lamboo
501b15753d Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles" 
This reverts commit 5a291f9ba9e83c85d1bdfe1c0e907e0df8154f6f.
 2024-02-22 16:20:39 +01:00
casperlamboo
8fcdd09b7b Applied printer-linter format 2024-02-20 15:49:37 +00:00
c.lamboo
bc41b8f801 Use string for prime tower enum value 2024-02-20 16:48:38 +01:00
Erwan MATHIEU
e642d85fcd Merge remote-tracking branch 'origin/main' into optimized-prime-tower 2024-02-16 09:10:49 +01:00
Erwan MATHIEU
5a291f9ba9 Change prime_tower_enable to prime_tower_mode in all defs/profiles 2024-02-16 09:04:48 +01:00
Paul Kuiper
2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 
It also cleans up the settings.

PP-389
 2024-02-08 16:20:02 +01:00
MariMakes
d8e6a2b0b4 Align S-line printers 
This should be in line with the updated brand guide.
 2023-11-03 10:54:28 +01:00
Paul Kuiper
41562f55b2 Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface. 2023-10-06 10:26:58 +02:00
Paul Kuiper
3128ffb34a Make 0.2m the default layer height for S line printer (iso 0.15mm). 
PP-245
 2023-09-01 16:01:25 +02:00
Frederic Meeuwissen
d5de1d696c Don't exclude generic_petg on S3 2023-06-28 10:07:13 +02:00
Jelle Spijker
e3a4c84463
Merge remote-tracking branch 'origin/PP-336_Cleanup_infill_overlap_settings' 
# Conflicts:
#	resources/i18n/cs_CZ/cura.po
#	resources/i18n/cura.pot
#	resources/i18n/de_DE/cura.po
#	resources/i18n/es_ES/cura.po
#	resources/i18n/fi_FI/cura.po
#	resources/i18n/fr_FR/cura.po
#	resources/i18n/hu_HU/cura.po
#	resources/i18n/it_IT/cura.po
#	resources/i18n/ja_JP/cura.po
#	resources/i18n/ko_KR/cura.po
#	resources/i18n/nl_NL/cura.po
#	resources/i18n/pl_PL/cura.po
#	resources/i18n/pt_BR/cura.po
#	resources/i18n/pt_PT/cura.po
#	resources/i18n/ru_RU/cura.po
#	resources/i18n/tr_TR/cura.po
#	resources/i18n/zh_CN/cura.po
#	resources/i18n/zh_TW/cura.po
 2023-06-05 11:09:16 +02:00
Jelle Spijker
ba5cd429c0
Merge pull request #15632 from Ultimaker/PP-81_Easy_to_tear_of_brim 
PP-81 easy to tear of brim
 2023-06-05 10:56:39 +02:00
Frederic98
afc36fbfd9 Applied printer-linter format 2023-05-30 15:24:43 +00:00
Frederic Meeuwissen
eb2aa80ffa PP-81: Set brim_gap to horizontal expansion + 50um 2023-05-30 17:22:33 +02:00
Paul Kuiper
ed4ad6b8ef Cleanup skin overlap. Set to 20% by default for S line machines. 
Relates to: PP-321
 2023-05-15 11:56:07 +02:00
Paul Kuiper
ffbc7bb310 Cleanup of infill overlap setting. Make it 10% for S line machines and keep it 0% for the other machines. Removed all overwrites from the quality profiles. 
Relates to: PP-336
 2023-05-15 11:21:14 +02:00
Bryan Foley
3b538d975c Revert "SEM-166 Apply suggestions from code review" 
This reverts commit 21de7a366735a282fb459dfff4b517a0a6df84e7.
 2023-04-18 10:12:23 +02:00
Bryan Foley
21de7a3667
SEM-166 Apply suggestions from code review 
Co-authored-by: Jelle Spijker <jelle.spijker@ultimaker.com>
 2023-04-18 10:06:46 +02:00
bryanfoley
e606dae5c5 Applied printer-linter format 2023-04-14 09:33:54 +00:00
Bryan Foley
807f407d9f SEM-166 Add extra BOM numbers to UMs3, UMs5 and UMs7 2023-04-14 11:31:57 +02:00
Rijk van Manen
9171aa9168 follow the default settings 
PP-71
 2023-01-24 11:08:16 +01:00
Paul Kuiper
7a671eaa03
Change preffered quality from normal (0.1mm) to fast (0.15mm) (#13974) 
Change preferred quality from normal (0.1mm) to fast (0.15mm) to increase the default productivity.

Added a default layer height of 0.15mm in unsupported modes.

This also applies some linter suggestions

Co-authored-by: pkuiper-ultimaker <pkuiper-ultimaker@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
 2022-12-13 10:17:18 +01:00
Rijk van Manen
205902ee68 printer linter format 
PP-296
 2022-12-12 15:39:28 +01:00
Rijk van Manen
27d56d378e improve initial layer settings 
ultimaker.def.json is also cleaned and put in alphabetic order.
Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42
 2022-10-06 16:11:04 +02:00
Jaime van Kessel
0dea6d7cca
Merge branch 'PP-243-cleanup-raft-settings' of github.com:Ultimaker/Cura 2022-09-15 13:57:39 +02:00
Jaime van Kessel
ee551e48b3
Restore incorrectly removed settings 
Something went wrong here, it removed the wrong defaults...
 2022-09-14 13:45:27 +02:00
Rijk van Manen
4712c6abc3 restructure raft airgap 
No values are changed, but the settings are restructured. The PVA airgap is moved to fdm_materials. Inconsistent use of equations is also resolved. PP-243
 2022-09-13 11:59:34 +02:00
Rijk van Manen
179e6bdfb6 cleanup raft speeds 
raft base speed is only 15mm/s to avoid extreme flows. The raft surface speed equals the top/bottom speed, so the raft surface has a flow equal to the top/bottom flow. The raft interface is again the average of the surface and the base. PP-243
 2022-09-13 11:18:38 +02:00
Rijk van Manen
e4534943e7 new raft base thickness default 
The new default of the raft base thickness is close to the current values. The limited thickness of 0.3mm is used to avoid extreme flowrate for 06 and 08 nozzle sizes. PP-243
 2022-09-13 10:45:59 +02:00
Rijk van Manen
08a5f07d53 raft interface line spacing can follow default 
This is a non critical setting, just follow the default defined in fdmprinter. PP-243
 2022-09-13 10:33:28 +02:00
Rijk van Manen
96569edcf0 raft middle line width has new default 
The raft middle line width is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
 2022-09-13 10:27:05 +02:00
Rijk van Manen
257d37eb73 raft middle layer thickness has new default 
The raft middle layer thickness is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
 2022-09-13 10:20:40 +02:00
Rijk van Manen
834cc4129e cleanup raft top layers 
This commit does effectively change nothing. The default of 2 top layers is set in fdmprinter and it is made 1 for 08 cores. PP-342
 2022-09-13 09:50:37 +02:00
Rijk van Manen
e742a6afa8 set raft margin to default of 15mm 
The raft margin is not a critical setting and for most profiles it resolves to 15mm currently, which is the default in fdmprinter. PP-243
 2022-09-13 09:33:39 +02:00
Rijk van Manen
e64a48bc86 cleanup jerk settings 
Variants: jerk_print = 25 for 0.8 cores
Intent: jerk_print = 30 for Draft/Engineering
PP-239
 2022-09-08 16:28:36 +02:00
Jaime van Kessel
370d0bcf03
Add extra BOM numbers to UMs3 and UMs5 2022-09-06 13:43:14 +02:00
Jaime van Kessel
2c331604e8
Clean up a lot of duplicate settings from machine profiles 
These were errors that were copy pasted from other definitions. So leaving them as is would
continue to decrease the quality of third party profiles.
 2022-09-06 11:39:08 +02:00
Rijk van Manen
246fcae0f8 disable travel_avoid_supports 
While CURA-9337 is not implemented this a mitigation to avoid unnecessary combing. PP-172
 2022-08-30 15:52:18 +02:00
Rijk van Manen
6d489659f2 Clean up of standby temperatures 
Clean up of standby temperatures to printing temperature -100deg. This is a safe default. PP-192
 2022-08-29 14:52:02 +02:00
j.delarago
cd34294914 Revert "disable travel_avoid_supports" 
This reverts commit 8f2dff712ec18046bf76211fa3a8dd7d20647d30.
 2022-06-15 17:19:03 +02:00
p.kuiper
6e7e0b5f77 Switching on support gradual infill and support offset to 2*line width when support interface layer is enabled. 
Relates to PP-108
 2022-06-03 14:02:53 +02:00
Jaime van Kessel
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max 
Pp 170 clean up retraction limits
 2022-06-02 17:05:57 +02:00
Jaime van Kessel
b42a06fddd
Merge pull request #12418 from Ultimaker/PP-172-dont-avoid-supports 
PP-172 disable travel_avoid_supports
 2022-06-02 15:50:47 +02:00
p.kuiper
fec4888989 Clean up of jerk settings. Moved the jerk setting up to ultimaker.def.json. Removed duplicate entries in quality profiles and removed a number of strange jerk entries in the quality profiles. 
Relates to PP-19
 2022-06-02 09:04:13 +02:00
Rijk van Manen
8f2dff712e disable travel_avoid_supports 
While CURA-9337 is not implemented this a mitigation to avoid unnecessary combing. PP-172
 2022-06-01 15:43:12 +02:00