Ghostkeeper
d7102729f1
Use spaces instead of tabs
...
And remove floating point rounding errors too.
Contributes to issue CURA-7260.
2020-02-27 10:57:15 +01:00
Ghostkeeper
f6bc220faa
Merge branch 'master' of https://github.com/skriDude/Cura into skriDude-master
...
Conflicts:
resources/definitions/skriware_2.def.json -> On master the old setting value was changed to 'value' rather than 'default_value', while on this branch the value was changed to use the resolve function.
2020-02-27 10:54:31 +01:00
Ghostkeeper
b4a646c191
Make warning values for support interface depend on Z distance
...
Rather than a hard-coded 0.2mm. The point of these is to ensure that there is always one layer.
2020-02-25 14:42:11 +01:00
Ghostkeeper
dba35dc664
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2020-02-25 14:34:36 +01:00
Hussain Bhavnagarwala
055a224c72
Update fabxpro.def.json
2020-02-25 07:34:34 +05:30
Ghostkeeper
43e373af02
Merge branch 'master' of https://github.com/FN5969/Cura into FN5969-master
2020-02-24 17:00:12 +01:00
skriDude
05f050eccc
fixed support layer height
2020-02-20 15:27:33 +01:00
Hussain Bhavnagarwala
5ae9f44aab
Update fabxpro.def.json
2020-02-19 18:15:33 +05:30
yyh1002
f9a719ac69
DXU profile
2020-02-19 22:55:08 +11:00
yyh1002
b49a1e35f8
DXU profile
2020-02-19 22:45:26 +11:00
Ghostkeeper
4cb239a97f
Merge branch '4.5'
2020-02-19 11:41:07 +01:00
Ghostkeeper
ed17cfafb7
Reduce minimum value warning for Anti-Ooze Retracted Position
...
For BAM and filled materials the default would give a warning position since for a filament switch it needs to retract more than for the normal print.
Done as a 5 minute fix.
2020-02-19 11:40:44 +01:00
Hussain Bhavnagarwala
d3742c2c95
Update fabxpro.def.json
2020-02-19 15:05:05 +05:30
Hussain Bhavnagarwala
4993a26a90
Update fabxpro.def.json
2020-02-19 14:29:18 +05:30
Hussain Bhavnagarwala
38f74d5028
Add files via upload
...
FabX Pro Definition File
2020-02-19 13:50:32 +05:30
Mehmet Sutas
48bb55e923
Remove machine_head_polygon
2020-02-18 15:23:04 +03:00
jos@mauk.cc
a53b1fc1d9
HMS434 update
...
support settings
toolchange settings
2020-02-17 15:28:38 +01:00
Mehmet Sutas
0237904292
CI Fix
2020-02-17 01:18:14 +03:00
Mehmet Sutas
d417e436ba
CI Fix
2020-02-17 00:43:45 +03:00
Mehmet Sutas
5931826414
Update rigid3d_zero2.def.json
2020-02-16 19:43:27 +03:00
Mehmet Sutas
a0f02897e4
Update Rigid3D Profiles
2020-02-16 18:02:04 +03:00
yyh1002
050ab50062
DXU defenition
2020-02-15 18:46:51 +11:00
PurpleHullPeas
939f761843
Fixing default bed temperature for MP Mini Delta
...
The stock Monoprice Mini Delta 3D printer has trouble reaching 60 C. Setting the bed temperature to 40 C so that it doesn't confuse newcomers to the hobby when the printer sits forever waiting for the bed to reach a temperature that it cannot attain.
2020-02-13 20:20:55 -06:00
Remco Burema
958f1a855c
Merge pull request #7010 from smartavionics/mb-hole-offset
...
Added Hole Horizontal Expansion setting.
2020-02-13 09:05:18 +01:00
Szymon Gamża
4ea408c86b
Changed name of machine cause of orion.de
2020-02-13 08:56:08 +01:00
Ghostkeeper
1bb9371d08
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2020-02-10 16:40:17 +01:00
Mehmet Sutas
da0e84bdfc
Update Rigid3D Printer Profiles
2020-02-10 01:05:20 +03:00
Ghostkeeper
a168e9f8a6
Don't use spaces in definition IDs
...
Use underscores. Spaces are encoded differently with the quote_plus function and also the translation system borks on these.
Contributes to issue CURA-7201.
2020-02-07 13:55:24 +01:00
jeffkyjin
1e88708b1d
fix mbot3d grid printer profile
2020-02-05 18:04:32 +08:00
jeffkyjin
b3681eacf2
modify grid 4 def
2020-02-05 17:33:54 +08:00
mobilityapplab
f59c9383da
Update fdmprinter.def.json
...
Add Smoothie Firmware Flavor option.
2020-02-04 14:00:23 -05:00
Orel
802f92700b
Add "machine_extruders_share_heater" parameter in printer profiles
2020-02-04 11:36:42 +01:00
Orel
67146c2b25
Enhance quality profiles for Dagoma printers
2020-02-04 11:13:47 +01:00
Orel
173a05ddb5
Merge remote-tracking branch 'upstream/master' into dagoma_discoultimate
2020-02-04 10:07:56 +01:00
jeffkyjin
a989838823
Add MBot3D Grid Printers
2020-02-04 14:39:51 +08:00
Ghostkeeper
3a616c78bc
Merge branch 'rf100_config' of https://github.com/dok-net/Cura into dok-net-rf100_config
2020-02-03 11:47:50 +01:00
Jaime van Kessel
f03b6cc7dc
Add some max values for FDMPrinter temperatures
...
Marlin breaks on anything above it, so these seem like sensible defaults
A-6.1 (WhiteHats)
2020-01-31 16:21:59 +01:00
Ghostkeeper
32d94f76f1
Merge branch 'mb-fuzzy-outside-only' of https://github.com/smartavionics/Cura into smartavionics-mb-fuzzy-outside-only
2020-01-31 13:10:45 +01:00
Ghostkeeper
c00004b1c0
Correct capitalisation of Geeetech printer names
...
Contributes to issue CURA-7132.
2020-01-30 15:47:18 +01:00
amitlobo
004ddb3e2c
Add Geeetech printer and extruder definitions
2020-01-30 15:46:08 +01:00
Szymon Gamża
508b08ff0d
Fixed default_value/value overrides.
2020-01-29 08:30:21 +01:00
Dirk O. Kaar
58d737a9a9
Retraction hop enable has default value, the height value is fine by default, too.
2020-01-28 11:00:11 +01:00
Szymon Gamża
b2353118c7
Definition changes
2020-01-28 09:57:56 +01:00
Szymon Gamża
7e74c243bd
Changed max chamber temp for machines
2020-01-27 14:49:16 +01:00
Szymon Gamża
2ddeb5dc39
Add ATMAT printers profiles
2020-01-27 12:04:30 +01:00
Kostas Karmas
bcec433f53
Update description of the Print Sequence setting
...
Update description to clearly state that Print Sequence is not
possible if more than one extruders are enabled.
CURA-6914
2020-01-24 17:30:46 +01:00
Ghostkeeper
db41a83aa6
Fix mix of whitespace styles: Use spaces instead of tabs
...
Contributes to issue CURA-7140.
2020-01-24 16:13:15 +01:00
Ghostkeeper
61d5ace952
Merge branch 'rf100_config' of https://github.com/dok-net/Cura into dok-net-rf100_config
2020-01-24 16:09:09 +01:00
Kostas Karmas
037e4d5b5f
Merge branch 'PurpleHullPeas-add_mp_mini_delta'
2020-01-21 16:59:24 +01:00
Kostas Karmas
c0052ad492
Merge branch 'add_mp_mini_delta' of https://github.com/PurpleHullPeas/Cura into PurpleHullPeas-add_mp_mini_delta
2020-01-21 16:29:53 +01:00
