sm3dp
da4eeaa622
Added LotMaxx sc10 and sc20 profile
2019-12-17 22:27:09 +08:00
Lipu Fei
8b256f3efc
Merge pull request #6694 from maukcc/master
...
HMS434 update
2019-12-17 11:00:46 +01:00
Lipu Fei
dd5c6c892c
chmod 644 for def.json files
2019-12-17 10:35:23 +01:00
Mark Burton
678ba61bca
Add brim gap setting ( #6279 )
...
Added brim_gap setting to space brim away from edge of model.
2019-12-16 13:55:08 +01:00
Ghostkeeper
1dc39dba71
Move prime speed override to definition file
...
To reduce the number of overrides. You'd only need to change it in one place, next time. It was being overridden in the quality profile in every supported configuration.
2019-12-16 13:15:40 +01:00
Benoit Miller
44ffa97ade
Fixed issues raised in #6666
2019-12-12 17:04:01 -05:00
Benoit Miller
9259cea2dc
Merge branch 'master' of https://github.com/Ultimaker/Cura into voron2-support
2019-12-12 16:40:35 -05:00
Remco Burema
8cc054cecc
Add missing 'material break preparation temperature'.
...
part of CURA-6971
(cherry picked from commit 25f0460231fd970b73744fb3fe1c004dc68a5dc9)
2019-12-12 14:09:46 +01:00
MaukCC
002cf07834
Merge branch 'master' into master
2019-12-12 09:05:45 +01:00
jos@mauk.cc
c6cfd12c6f
HMS434 update
2019-12-12 09:04:41 +01:00
Lipu Fei
f2b18d9d2a
Merge branch 'master' into add-lotmaxx-printers
2019-12-12 08:23:31 +01:00
Remco Burema
2d486b0814
Default behaviour should be the same as previous.
...
Also added the new setting to 'expert' visibility.
2019-12-11 17:00:02 +01:00
Lipu Fei
af562b9c69
Merge branch 'master' into master
2019-12-11 10:58:30 +01:00
Lipu Fei
820925c9aa
Merge branch 'master' into default_union_off_for_surface_mode
2019-12-11 10:58:27 +01:00
Lipu Fei
3bdc90b89c
Merge branch 'master' into mesh_processing_order
2019-12-11 10:57:14 +01:00
Remco Burema
f0b277d491
Merge branch 'mb-skin-edge-support' of https://github.com/smartavionics/Cura into smartavionics-mb-skin-edge-support
2019-12-10 16:55:28 +01:00
Ghostkeeper
7f969528f3
Merge branch 'master' of ssh://github.com/Ultimaker/Cura
2019-12-10 16:03:02 +01:00
Ghostkeeper
ba2c9cb21e
Fix JSON formatting of start g-code
...
No newlines allowed.
2019-12-10 16:02:45 +01:00
Ghostkeeper
455721130c
Merge branch 'master' of https://github.com/TheOneOgre/Cura into TheOneOgre-master
2019-12-10 15:57:57 +01:00
Jaime van Kessel
f66b1e6fde
Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_revert_edge_distance_hack
2019-12-10 13:06:37 +01:00
Jaime van Kessel
7ba1db830a
Re-enable the retraction min travel setting
...
CURA-6675
2019-12-10 13:00:29 +01:00
jos@mauk.cc
950e96da2d
HMS434 update
...
Z seam changed
PLA quality profiles deleted
2019-12-06 08:54:51 +01:00
jos@mauk.cc
6d8052656c
HMS434 update
...
bed temp initial layer
2019-12-04 10:10:05 +01:00
Ghostkeeper
961cd937b4
Correct start and end g-code
...
According to the thread at #6673 this works.
Fixes #6673 .
2019-12-04 09:58:19 +01:00
Jeff Kazules
726561bf30
Increase printer size and add disallowed areas
...
With the stock firmware of the Ender 3, the size of the original printer was wrong, causing the model to land in a different place on the build plate. This led people to believe that the printer could take bigger prints. However it couldn't; it was just not allowing to print all the way down to the coordinate origin at 0,0.
This makes the printer bigger but also adds disallowed areas so that you can't print anything near 0,0.
Fixes #6267 .
2019-12-03 13:39:50 +01:00
jos@mauk.cc
055fc1450d
HMS434 update
2019-12-02 16:13:47 +01:00
jos@mauk.cc
bdc3ceeb52
HMS434 update
...
acceleration and line width
2019-12-02 14:34:36 +01:00
Benoit Miller
e4c7a4752e
Merge branch 'master' of https://github.com/Ultimaker/Cura into voron2-support
2019-12-01 14:46:12 -05:00
jos@mauk.cc
070f9e1537
HMS434 update
...
small changes
2019-11-28 10:00:53 +01:00
Jaime van Kessel
b5bf3e8e85
Merge branch 'mb-bridge-skin-over-sparse-infill' of https://github.com/smartavionics/Cura
2019-11-26 15:41:04 +01:00
Remco Burema
25f0460231
Add missing 'material break preparation temperature'.
...
part of CURA-6971
2019-11-22 12:01:46 +01:00
jos@mauk.cc
c2efca9025
HMS434 update
2019-11-21 17:06:28 +01:00
jos@mauk.cc
7c4eeb3b23
HMS434 update
2019-11-21 16:42:59 +01:00
Jaime van Kessel
50d72692d8
Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_one_at_a_time_overlapping_build_area
2019-11-20 16:48:00 +01:00
Jaime van Kessel
266f7d1f74
Also bump up the version nr of FDMExtruder & FDMPrinter
...
CURA-6522
2019-11-20 16:39:38 +01:00
Benoit Miller
dd477fe136
Add VORON2 printer profile
2019-11-16 08:16:09 -05:00
sm3dp
ce881b88e5
Added LotMaxx sc10 and sc20 profile
2019-11-15 19:27:49 +08:00
Jaime van Kessel
c65ccf29b0
Merge branch 'mb-shared-heater' of https://github.com/smartavionics/Cura
2019-11-14 11:06:12 +01:00
TheOgre
23d7dca1fc
Added missing bracket, tidied up code
...
Added a missing { before "default_value".
Moved items around to match the layout of the current file.
2019-11-12 06:22:06 -05:00
Nino van Hooff
254dde5b05
REmove duplicate key machine_head_with_fans_polygon
2019-11-11 15:02:49 +01:00
Jaime van Kessel
3e50cf5253
Fix issues with makeblock definition
2019-11-11 13:43:04 +01:00
Lipu Fei
2fb8375714
Merge pull request #6591 from pkz0313/master
...
Hopefully Adding the Makeblock 3d Printer files to the latest version
2019-11-11 10:55:46 +01:00
baddogg1231
f3e597d684
Update creality_ender3.def.json
2019-11-09 21:36:13 -05:00
baddogg1231
78e7aa2d21
Added Ender 3 Prime Line to Start G-code
...
Added the popular prime line for the Ender 3 as the default starting g-code and added a modification that works around the Cura 4.3.0 update that moves the print head to Z0 before starting the print, which moves the printhead down into the filament.
2019-11-09 21:33:04 -05:00
Kaz
a5aa4c75ba
update gantry_height
2019-11-08 14:11:34 +08:00
Lipu Fei
33f876d749
Fix leapfrog bolt pro definition files
2019-11-06 15:43:22 +01:00
Lipu Fei
0ad5ce19da
Fix leapfrog profiles
...
CURA-6951
2019-11-05 12:49:27 +01:00
Lipu Fei
2e4e19594f
Merge pull request #6608 from Leapfrog3DPrinters/master
...
Leapfrog Bolt Pro machine profile
2019-11-05 12:48:39 +01:00
Ghostkeeper
f48a5ec028
Fix zigzag initial layer pattern for Skriware 2
2019-11-04 16:43:54 +01:00
Vincent Riemens
c30ec406cf
Add files via upload
2019-11-04 16:28:55 +01:00
