GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-05-07 00:59:00 +08:00
Code Issues Packages Projects Releases Wiki Activity
24,127 Commits 290 Branches 260 Tags
Commit Graph

2711 Commits

Author SHA1 Message Date
Lipu Fei
32747d2abe Merge remote-tracking branch 'origin/master' into feature_intent 2019-10-07 21:20:54 +02:00
Ghostkeeper
d1f9245d26
Move Maximum Resolution and Maximum Deviation out of experimental 
Yes, it does comply to our Definition of Not Experimental. And I asked.
 2019-10-07 17:17:43 +02:00
Ghostkeeper
225d1a2ac1
Allow minimum circumference to be 0 
It should just not filter then.
 2019-10-07 15:25:49 +02:00
Lipu Fei
0d554c4938 Merge remote-tracking branch 'origin/master' into feature_intent 2019-10-04 10:19:36 +02:00
KOUBeMT
3f9f465053 Update strateo3d.def.json 2019-10-03 12:03:48 +02:00
Ghostkeeper
672fc58930
Allow down to half the layer height for infill layer thickness 
This is possible because CuraEngine rounds these to the nearest layer thickness. So if it's more than half the layer height it gets rounded up and it's still properly one layer.

Contributes to issue #6465.
 2019-10-02 12:59:48 +02:00
Lipu Fei
750632ec41 Merge remote-tracking branch 'origin/master' into feature_intent 2019-10-02 12:52:37 +02:00
Ghostkeeper
2a4c387067
Add sideways move to not squash the primed amount onto the nozzle 
Provided by Psychonno and tested by MetalRobo in #6424.
 2019-10-02 11:44:24 +02:00
Jaime van Kessel
872d6365a9
Fix seam location if it's relative 2019-10-02 10:45:50 +02:00
Ghostkeeper
b245be6970
Remove has_machine_materials metadata 
It's not behaving as expected here. For instance, Ultimaker 3 wasn't specifying has_machine_materials and thus only the base materials would get loaded, but clearly the Ultimaker 3 has materials specialised for it.
Whether or not a printer has materials specialised for it is now determined by whether the specialisations exist in the material files. So we don't need the metadata entry any more. It seemed to have not been in use anyway, except by one printer which specified that has_machine_materials is true. I've now made it behave as if it's always true.

Contributes to issue CURA-6831.
 2019-10-02 08:55:04 +02:00
Lipu Fei
96a9bcccbb Merge remote-tracking branch 'origin/master' into feature_intent 2019-10-01 09:41:05 +02:00
Lipu Fei
609ceed140
Merge pull request #6426 from Ultimaker/CURA-6106_fix_interface_disappearing 
Warn when difference between X/Y distance and minimum X/Y distance is too big
 2019-10-01 09:40:05 +02:00
Ghostkeeper
ed9ec1d724
Align comment with the rest 
Looks nicer.
 2019-09-30 17:30:12 +02:00
Ghostkeeper
01b66ecaa0
Merge branch 'oorail/fix-jgaurora-z603s-end-print-problem' of https://github.com/oorail/Cura into oorail-oorail/fix-jgaurora-z603s-end-print-problem 2019-09-30 17:25:58 +02:00
oorail
d47ff60bf8 Optimized machine end gcode to move at F600 and in one command vs two 2019-09-30 09:51:44 -04:00
Ghostkeeper
5c2c4118c6
Add clarification about that supported overhang doesn't fall into this category 
Fixes #6436.
 2019-09-30 12:58:36 +02:00
oorail
6228b30d62 Changed the JG Aurora z603s definition to send the print head to the rear of the printer. The z603S is a COREXY style printer, unlike the other JG Aurora printers where moving the Y-axis shifts the bed to the front for easy print removal. On the z603s, it shoves the print head into the frame of the printer, the X-axis bar and the print head are then in the way, making it difficult to remove the print. The z603S should have the print head homed on X and Y axis to tuck it out of the way in the rear right of the printer 2019-09-29 18:52:40 -04:00
Ghostkeeper
3c17af6192
Clarify description of support interface area settings 
They'll be generated and then tossed away. I'm specifying that there will be normal support in its place, unlike the minimum support area setting that replaces the support with air. It won't be air here, but normal support.
 2019-09-29 18:25:11 +02:00
Walt Sorensen
827f84bd6a
Set BIBO print speed to 40mm/s 
BIBO and members from the BIBO group on Facebook say this printer should be run at 40-45mm/s and not the FDMprinter default of 60mm/s. BIBO provided test gcode files also show that they are setting 40mm/s in the slicer to create their test files.

This change sets the print speed override so the printer profile does not start at the FDMPrinter print speed default of 60mm/s but at the reccommended value of 40mm/s
 2019-09-26 19:26:10 -06:00
Ghostkeeper
53a535a077
Warn when difference between X/Y distance and minimum X/Y distance is too big 
This could cause a large overhang.

Contributes to issue CURA-6106.
 2019-09-26 17:05:05 +02:00
Ghostkeeper
0161a1eca5
Fix dual extrusion for Magna Dual 
Contributes to issue CURA-6813.
 2019-09-26 11:14:01 +02:00
Ghostkeeper
541bd3811e
Fix whitespace 
Contributes to issue CURA-6813.
 2019-09-26 10:33:44 +02:00
Ghostkeeper
d670ec7266
Merge branch 'master' of https://github.com/F-Fischer/Cura into F-Fischer-master 2019-09-26 10:30:16 +02:00
F-Fischer
8b321bc398 Pull Request Requested changes 2019-09-25 13:52:42 -03:00
Ghostkeeper
23cc73a78f
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master 2019-09-25 11:53:44 +02:00
Ghostkeeper
0c873d1757
Fix inheritance of support interface line direction settings 
Fixes #6412.
 2019-09-25 11:42:34 +02:00
Ghostkeeper
9f1b434a7e
Don't show support brim width if support brim is disabled 2019-09-25 11:15:21 +02:00
maukcc
31a78975ec HMS434 update and material exclusion 2019-09-25 10:23:20 +02:00
Lipu Fei
94e89ad4ac Fix merge conflicts with master 2019-09-24 14:26:43 +02:00
Lipu Fei
bd314a765f Update setting_version 
CURA-6799
 2019-09-24 11:19:03 +02:00
Lipu Fei
a6218179a9
Merge pull request #6329 from maukcc/master 
HMS434 change
 2019-09-24 11:04:50 +02:00
maukcc
184116995c HMS434 outside wall 2019-09-23 16:35:41 +02:00
maukcc
250402142a HMS434 add ironing 2019-09-20 09:33:41 +02:00
maukcc
a1d8fd8743 HMS434 quality deleted 
HMS434 quality deleted in favor of .package types
 2019-09-19 15:35:58 +02:00
Jaime van Kessel
7016e791c8
Fix containertree for machines without materials but with specific qualities 
CURA-6775
 2019-09-19 15:33:19 +02:00
Ghostkeeper
fd452e74b3
Merge branch 'mb-fix-small-feature-blurb-spello' of https://github.com/smartavionics/Cura into smartavionics-mb-fix-small-feature-blurb-spello 2019-09-17 13:15:57 +02:00
Ghostkeeper
d0b7a52ef5
Remove unused definition ID field 2019-09-17 13:10:25 +02:00
DragonJe
00676e3878
Create key3d_tyro.def.json 2019-09-16 17:53:13 -05:00
SAMSECTOR
e946eb1b5c
Creat Original_Prusa_i3_MK3S_MK3.def.json 
This is the latest definition for Prusa i3 MK3/MK3s made by Prusa Research with minor modification to fit in Prusa folder under "add printer"
reference :
https://manual.prusa3d.com/Guide/How+to+import+profiles+to+Cura+4.x+(Windows+&+macOS)/1421#_ga=2.78043415.205833688.1568467545-859345073.1567270611
 2019-09-16 22:29:58 +03:00
F-Fischer
3606ac8bd6 Hellbot printers definitions added 2019-09-16 16:23:35 -03:00
Ghostkeeper
8d21f75c40
Merge branch 'feature_intent_container_tree' into feature_intent_upgrade 2019-09-16 15:20:41 +02:00
Ghostkeeper
9b341cf604
Remove UM2 upgrade selection machine action 
Instead of choosing the Olsson block with this wizard, choose it by choosing the correct definition to start with.

Contributes to issue CURA-6775.
 2019-09-16 15:19:47 +02:00
Ghostkeeper
bda7a6ce0a
Shorten name of UM2E with Olsson 
This is necessary because on some file systems (e.g. encryptfs) the length of these file names is limited and that would crash Cura.

Contributes to issue CURA-6775.
 2019-09-16 15:15:17 +02:00
Ghostkeeper
3b5716a64a
Add definition for Ultimaker 2 Extended with Olsson Block 
Only the name is now too long by default. I have to shorten it.

Contributes to issue CURA-6775.
 2019-09-16 15:07:04 +02:00
Ghostkeeper
c6a57a0ab7
Give Ultimaker 2 with Olsson the quality definition of the Ultimaker 2 
This way, the user's profiles should remain intact after the upgrade.

Contributes to issue CURA-6775.
 2019-09-16 15:00:05 +02:00
Ghostkeeper
3c9d191a6e
Add separate definition for Ultimaker 2 with Olsson block 
This is necessary because our ContainerTree class can only create one tree per definition. This tree is not created separately for every added printer and as such the tree can't be different for every added printer.
However the Ultimaker 2 Olsson block upgrade allows selecting extra variants for the UM2. This changes the available variants in the container tree, so this would be impossible.

By making it a separate definition, it now gets a separate tree. However this does mean that we need to do a version upgrade for this as well.

Contributes to issue CURA-6775.
 2019-09-16 14:57:45 +02:00
Daniel Green
57a50c9c3d Correction for build volume. 2019-09-15 09:56:21 -07:00
Mark Burton
fb5ec97cb8 Fix spelling. 2019-09-14 20:19:52 +01:00
maukcc
d514b324fb HMS434 update 
HMS434 update on material and quality profiles
 2019-09-13 11:38:42 +02:00
Lipu Fei
fa8213c601 Merge remote-tracking branch 'origin/feature_intent_container_tree' into feature_intent_upgrade 2019-09-13 10:31:11 +02:00