24788 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Kostas Karmas	ec633feb37	Remove transition_length from the front-end ... It is set as 2*wall_line_width in CuraEngine. CURA-7555	2020-08-19 17:48:43 +02:00
Kostas Karmas	217e01b5b3	Remove LimitedDistributed option from the beading strategies setting ... As the Limited will always apply on top of the others, so selecting the Distributed is essentially the same as selecting the LimitedDistributed. CURA-7555	2020-08-19 17:29:54 +02:00
Kostas Karmas	4954746ee4	Remove transitioning angle from the user settings ... Tt will be a constant on the CuraEngine side. CURA-7555	2020-08-19 17:17:40 +02:00
Kostas Karmas	a029e0ce50	Remove limited beading as an option ... As it will be applied by default in the Engine to ensure that libArachne will generate only the required walls (based on the Wall Line Count setting). CURA-7555	2020-08-19 17:02:44 +02:00
Jelle Spijker	b685da5a24	Merge pull request #8195 from Ultimaker/GetPropertySpeedImprovements ... Get property speed improvements	2020-08-19 16:41:26 +02:00
Ghostkeeper	74b9771c7d	Code style: Fields have lower camel casing ... As specified in the Ultimaker/Meta repository.	2020-08-19 15:46:08 +02:00
Ghostkeeper	9145a7e9e6	Remove unused import ... Done during investigation of #8075.	2020-08-19 15:35:57 +02:00
Jaime van Kessel	44885ab9a4	Merge branch '4.7' of github.com:Ultimaker/Cura	2020-08-18 14:14:11 +02:00
Jaime van Kessel	2fe9ee2cf2	Merge branch '4.7' of github.com:Ultimaker/Cura into 4.7	2020-08-18 13:54:58 +02:00
Jaime van Kessel	907caa53f0	Ensure that changing material type results in profile re-evaluation ... CURA-7657	2020-08-18 13:54:21 +02:00
Ghostkeeper	cb11dd763d	Merge branch '4.7'	2020-08-18 11:12:24 +02:00
Ghostkeeper	dea53b9c02	Revert "Use extruderList rather than deprecated extruders property" ... This reverts commit 458acb356f11f50c3327b5af0be8531fb761548f. The change was wrong. The code refers to PrinterOutputModel.extruders which is not deprecated, not to GlobalStack.extruders (which is deprecated). Fixes #8204.	2020-08-18 10:38:50 +02:00
Ghostkeeper	16d934ff96	Merge branch '4.7'	2020-08-17 15:07:38 +02:00
Ghostkeeper	6d90c85fb2	Also show Connect Support Lines for lines pattern ... Previously this was disabled because you should probably use the ZigZag pattern then. But I'm enabling it now because of two inconsistencies: * The setting still works. So you can change the setting by switching to grid, triangles, cross or gyroid, then switch back to lines and still get connected support lines. * The same happens with the infill patterns, where this setting is visible for the lines pattern. Rather than changing the other two things (which involves changes to CuraEngine too to make it ignore the setting value for the lines pattern), I've opted to change it here and fix both inconsistencies at once. If I were to make the setting dysfunctional, it would also lead to user confusion, because they then need to discover that they need to change the infill pattern, which may look unlogical to them. Fixes #8192.	2020-08-17 15:07:26 +02:00
Jaime van Kessel	0c994da4bb	Merge pull request #8106 from Ultimaker/CURA-7559_remove_wall_overlap_compensation_in_arachne ... CURA-7559: Remove all references to Wall Compensation from the resources/ in arachne	2020-08-17 14:13:01 +02:00
Jaime van Kessel	4bc214f859	Merge branch '4.7' of github.com:Ultimaker/Cura	2020-08-17 14:10:36 +02:00
Jaime van Kessel	ea7dc0ff01	Fix custom profiles not always being visible in menu ... CURA-7589	2020-08-17 14:09:27 +02:00
Cláudio 'Patola' Sampaio	9dcdc1f28a	Updated pt_BR strings for 4.7	2020-08-16 22:53:11 +02:00
Aleksey Karadzhi	573a8c8720	Add more nozzle diameter variants (0.3, 0.5, 0.6)	2020-08-16 14:10:10 +03:00
Aleksey Karadzhi	29ade75429	Add 'Coarse' quality profile (0.4h for 0.8d)	2020-08-16 14:09:15 +03:00
Aleksey Karadzhi	3522501fa8	Adjust base print settings for all FB printers	2020-08-16 14:07:10 +03:00
Aleksey Karadzhi	2c972d98d4	Add 'Flying Bear Ghost 5' printer	2020-08-16 14:04:04 +03:00
oducceu	f2b3596554	Merge pull request #2 from Ultimaker/master ... Update Fork	2020-08-15 23:41:53 +03:00
Jaime van Kessel	8b70d1b89e	Move codestyle to the begining of the tests ... Since it's one of the more expensive tests, it might actually knock off a few seconds	2020-08-14 16:42:22 +02:00
Jaime van Kessel	01aa729577	Split up build & test ... This should make the output a bit more segmented (and thus, more readable)	2020-08-14 16:37:45 +02:00
Jaime van Kessel	dd6467303e	Add option to not print the list of plugins installed. ... This should make it a lot easier to read the test output	2020-08-14 16:25:47 +02:00
Jaime van Kessel	a9c67542bf	Don't generate the translations when running the CI	2020-08-14 16:01:40 +02:00
Jaime van Kessel	04c216462a	Fix the unit test ... Previously we would only look at the state, but that isn't the only thing it should look at. It should override the value of a resolve if it's defined in user changes or QualityChanges.	2020-08-14 15:44:47 +02:00
Jaime van Kessel	43efac491d	Fix the unit test ... Previously we would only look at the state, but that isn't the only thing it should look at. It should override the value of a resolve if it's defined in user changes or QualityChanges.	2020-08-14 15:41:40 +02:00
Jaime van Kessel	bc67b057ea	Add missing required typing	2020-08-14 15:19:59 +02:00
Jaime van Kessel	eee84a82bf	Use exception instead of check if key is in dict ... Since the amount of times that the key is in there is orders of magnitude larger, it's better to catch the exception when it doesn't (as that is slightly faster)	2020-08-14 15:15:33 +02:00
Jaime van Kessel	9c904f95ce	Add a cache for settable_per_extruder property	2020-08-14 14:51:46 +02:00
Jaime van Kessel	51737dccd6	Don't create a context when it's not provided ... The rest of the functions already assume that None is an empty context	2020-08-14 14:19:19 +02:00
Jaime van Kessel	4c00a8ff2c	Add extra short-circuit for resolve	2020-08-14 13:57:09 +02:00
Jaime van Kessel	9a0264644b	Simplify the _shouldResolve function ... This increases the speed of the setting resolvement.	2020-08-14 13:41:20 +02:00
Kostas Karmas	cee7ac2ccc	Merge branch '4.7'	2020-08-14 13:33:53 +02:00
Konstantinos Karmas	2d56cd4e13	Merge pull request #8152 from thushan/cocoon-printer-profiles ... Adds Cocoon Create Printer profiles	2020-08-14 11:48:09 +02:00
Jaime van Kessel	7f47f12bf0	Merge branch '4.7' of github.com:Ultimaker/Cura into 4.7	2020-08-14 10:01:26 +02:00
Jaime van Kessel	ec48496790	Remove unneeded binding ... This binding wasn't needed to prevent a binding loop, but it did cause the length to not be updated correctly sometimes CURA-7589	2020-08-14 10:00:33 +02:00
Kostas Karmas	c8901e3b92	Merge branch 'master' into CURA-7376_full_of_spiders	2020-08-13 16:53:17 +02:00
Kostas Karmas	3e3d9bcd0a	Don't reset the min feature size and bead_width based on the widening ... We can just keep the value, since it is ignored in CuraEngine if the enable widening is false. CURA-7555	2020-08-13 16:43:32 +02:00
Kostas Karmas	41475ff243	Remove bead_width in favor of wall_line_width ... CURA-7555	2020-08-13 15:28:59 +02:00
Jaime van Kessel	1374c2faa9	Properly fix the translation crash	2020-08-13 15:13:11 +02:00
Jaime van Kessel	aba76d8bca	Merge branch 'CURA-7586_striped_in_layerview' of github.com:Ultimaker/Cura	2020-08-13 14:54:55 +02:00
Jaime van Kessel	5c8132a944	Fix translation crash	2020-08-13 14:54:34 +02:00
Remco Burema	6ad696e69a	Fix non-printing objects in preview.	2020-08-12 17:45:31 +02:00
Remco Burema	99cd8ab1b0	Show models outside of BP clearly in layerview. ... CURA-7586	2020-08-12 17:42:10 +02:00
Kostas Karmas	20f7423024	Add libArachne beading parameters in the fdmprinter ... CURA-7555	2020-08-12 17:28:28 +02:00
Ghostkeeper	8b59fe83d8	Clarify description of infill mesh rank ... Translators found it confusing, and I think users would find so too. Hopefully this is a bit better.	2020-08-12 14:15:38 +02:00
Jaime van Kessel	dd42c87da7	Merge branch 'CURA-7646_Settings_not_applied_when_creating_new_CFFF_from_project_file' of github.com:Ultimaker/Cura into 4.7	2020-08-12 13:42:14 +02:00