GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-05-01 00:04:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
35,563 Commits 291 Branches 260 Tags
Commit Graph

480 Commits

Author SHA1 Message Date
HellAholic
ed6daa3735
Merge pull request #19083 from GregValiant/InsertAtLayerChange 
Rewrite - Insert At Layer Change
 2024-10-02 14:03:03 +02:00
Erwan MATHIEU
d2b3ca3896 Apply suggested changes 2024-10-02 13:07:45 +02:00
Erwan MATHIEU
e4b4b8e4a4 Remove extra-spaces after units 2024-10-01 15:16:43 +02:00
GregValiant
ffc21403a1 Update TimeLapse.py 
Update TimeLapse.py

Update to include a pause before the image is snapped.
 2024-09-04 22:01:48 -04:00
GregValiant
dabc3d8032 Rewrite - Insert At Layer Change 
This is an extensive re-do of the script.
#     Added an 'Enable' setting
#     Added support for multi-line insertions (comma delimited)
#     Added insertions in a range of layers or a single insertion at a layer.  Numbers are consistent with the Cura Preview (base1)
#     Added frequency of Insertion (once only, every layer, every 2nd, 3rd, 5th, 10th, 25th, 50th, 100th)
#     Added support for 'One at a Time' print sequence
 2024-05-15 20:53:20 -04:00
GregValiant
35775ce3c8 Merge branch 'TIme-Lapse' of https://github.com/GregValiant/Cura into TIme-Lapse 2024-05-14 08:39:46 -04:00
GregValiant
0e0d022fe6 Update TimeLapse.py 
Added support for Firmware Retraction
 2024-05-14 08:39:41 -04:00
Jelle Spijker
1a95cd39ca
Merge branch 'main' into TIme-Lapse 2024-05-14 00:21:03 +02:00
GregValiant
0ba72bccf9 Re-write Time Lapse 
An update to the script.
- Added insertion frequency
- Added support for relative extrusion
- Retract is now a boolean and the settings come from Cura.  There won't be a retraction if there is already a retraction.
 2024-04-20 15:35:26 -04:00
Erwan MATHIEU
4bd1c4c4e0
Merge branch 'main' into patch-1 2024-04-12 10:16:32 +02:00
c.lamboo
f5877d3bce Fix post processing plugin button alignment 
This was caused by the label within the component spanning multiple lines, causing the height of the component to increase. Since the buttons were vertically aligned the positioning of these buttons are impacted.

CURA-11697
 2024-03-13 12:00:32 +01:00
GregValiant
29fcbf7f74 Update LimitXYAccelJerk.py 2024-02-04 08:57:08 -05:00
Jaime van Kessel
00f8f871b0
Merge branch 'main' of https://github.com/dmitrygribenchuk/Cura 2024-01-31 13:13:05 +01:00
GregValiant
2ad2afd1f4 Update 'Advanced Cooling Fan Control' post-processing script. 
See discussions in #15853 (on github) and (internally) tracking-ticket CURA-11520
 2024-01-09 19:55:03 +01:00
GregValiant
1a5370d2ef Add 'Advanced Cooling Fan Control' post-processing script. 
See discussions in #15853 (on github) and (internally) tracking-ticket CURA-11520
 2024-01-07 12:41:59 +01:00
Dmitry Gribenchuk
8116df6c21
cleanup unused import and fix comment space 2023-12-13 20:10:28 +02:00
GregValiant
d251d4c042 Update DisplayInfoOnLCD.py 
Added M73 options.  Verbiage changes.
 2023-11-28 16:38:52 +01:00
Remco Burema
ad9b11a256
Merge branch 'main' into DisplayInfoOnLCD 2023-11-24 13:59:45 +01:00
GregValiant
cd6e583f43 Update DisplayInfoOnLCD.py 
Add pause count notification

Update DisplayInfoOnLCD.py

Moved some line insertions to accommodate newer Creality firmware.

Change DisplayFIlename and DIsplayProgress

Add messages to use DIsplay Info and add exit code.

Update DisplayInfoOnLCD.py

Some changes
 2023-10-20 09:07:10 -04:00
Remco Burema
e603631b7e Fix '\d' deprecation warning. 
done as part of Python 3.12 spike (CURA-11078)
 2023-10-20 11:06:56 +02:00
GregValiant
c40dad5119 Update DisplayInfoOnLCD.py 
Added Print Finish Time option.  Changed a couple of if statements to "line.startswith".
 2023-10-11 19:47:57 -04:00
Remco Burema
1433c38374
Merge pull request #16805 from GregValiant/LimitXYAccelJerk 
Update LimitXYAccelJerk
 2023-10-04 13:50:09 +02:00
Remco Burema
cd73befc06
Merge pull request #15883 from GregValiant/PostProcPlugin 
Update PostProcessingPlugin.py
 2023-10-04 13:41:16 +02:00
Jaime van Kessel
aafe38aa16
Merge pull request #11917 from tapir/master 
Fix thumbnail format
 2023-10-04 13:01:39 +02:00
GregValiant
716fe5c507 Update LimitXYAccelJerk.py 
Changed ALL to PASS
Changed "Griffon" to "UltiGcode" and "Griffin".
 2023-09-27 14:43:43 -04:00
GregValiant
4d5e4ce3c5 Update DisplayInfoOnLCD.py 
Add a line below the ";TIME:" line to convert "seconds" to Hours:Minutes
 2023-09-24 09:40:02 -04:00
GregValiant
cc48f06d96 Update LimitXYAccelJerk 
Add support for RepRap M566 Jerk command (in mm/min).
 2023-09-24 09:27:13 -04:00
GregValiant
c2a541f5e1 Update DisplayInfoOnLCD.py 
Changed "name" variable to "file_name" to avoid any conficts.
 2023-09-14 22:16:28 -04:00
GregValiant
099cfe8294 Add 'Print Finish Time' estimate as a message 
Get the current print time estimate, adjust it by the Fudge Factor, and add it to the current time +10 minutes (to actually start the print.)

Update DisplayInfoOnLCD.py

Change message format for Finish Time Estimate.
 2023-09-10 09:20:04 -04:00
Remco Burema
c7356ccb4a Pass 'all' exceptions. 
part of CURA-10942
 2023-09-06 21:17:15 +02:00
Remco Burema
40cc6c7cde
Merge pull request #15954 from GregValiant/LimitXYAccel 
Create LimitXYAccelJerk.py
 2023-09-06 21:06:48 +02:00
GregValiant
8f0fb5ef12 Update LimitXYAccelJerk.py 
Changes made per Rburema requests.
 2023-08-29 07:51:58 -04:00
GregValiant
ae33d03eb2 Update LimitXYAccelJerk.py 
Add Exit for Ultimaker printers.
Add notice that Accel is not-extruder specific.
Changed variable names to lower case.
 2023-08-19 08:42:27 -04:00
MariMakes
596b3930b6 Align Licences to LGPLv3 
As discussed in https://github.com/Ultimaker/Cura/issues/15731, we should align these licences under the LGPLv3 because they fall under the Cura umbrella.
 2023-08-15 14:01:22 +02:00
GregValiant
362b4d894f Update DisplayInfoOnLCD.py 
Added TimeToPause to DisplayProgress
 2023-08-12 08:58:34 -04:00
GregValiant
e01b1406e3 Update LimitXYAccelJerk.py 
Added Gradual Accel Change.

Update LimitXYAccelJerk.py

Round the Accel numbers to nearest "50".

Create LimitXYAccelJerk.py

New post processor to limit the X and or Y accel and jerk for bed-slinger printers.

Update LimitXYAccelJerk.py

Removed debug code.

Update LimitXYAccelJerk.py

Remove debug code

Update LimitXYAccelJerk.py

Bug Fix
 2023-08-08 23:47:08 -04:00
Jelle Spijker
56b8205ce0 Revert "Fix wrong licenses" 
This reverts commit 8b8e96429339f7543c7cd0f50c710a3539b74258.
 2023-07-23 17:48:11 +02:00
MariMakes
8b8e964293 Fix wrong licenses 
These seem to be wrong by accident. Let's update them to reflect the rest of Cura which falls under the LGPLv3 or higher.
 2023-07-21 11:34:02 +02:00
GregValiant
5f3b96c26c Update DisplayInfoOnLCD.py 
Remove code that added the PP name to the gcode.

Create DisplayInfoOnLCD.py

This post processor combines DisplayLayerAndFilename with DisplayProgress.  Those two post processors would be obsolete.
 2023-07-16 14:52:17 -04:00
GregValiant
10ca563499 Obsolete DisplayFilename and DisplayProgress 
These two files become obsolete if DisplayInfoOnLCD is accepted.
 2023-07-16 14:52:17 -04:00
GregValiant
398556707f Update PostProcessingPlugin.py 
Add all the active Post Processor names to the gcode.
 2023-06-23 13:36:27 -04:00
Remco Burema
fa8e48152e Pause-at-height: Under rare circumstances T might not be an extruder switch. 
Some printers accept commands like TIMELAPSE_TAKE_FRAME or whatever, after all. Make it explciti that a line should start with T<number> in order to qualify.

Should fix #15729
 2023-06-16 09:09:01 +02:00
Remco Burema
99e1fcd4f8 Pause-at-height: Under rare circumstances, T might not be temperature. 
Some printers accept commands like TIMELAPSE_TAKE_FRAME or whatever.

Should fix #15729
 2023-06-15 22:34:39 +02:00
c.lamboo
acf4ad8476 Add linebreak after filament change command 
CURA-10615
 2023-05-23 16:30:18 +02:00
Mariska
1bbb4054fa
Update plugins/PostProcessingPlugin/scripts/FilamentChange.py 
Removed comment

Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>
 2023-05-23 15:37:34 +02:00
MariMakes
d1f9879ee1 Fixed Spacing 
The original file did not work correctly, this file worked after testing
 2023-05-22 11:25:39 +02:00
MariMakes
d40a20771b CURA-10615_Fix M600_Retract_Enter 2023-05-22 10:51:08 +02:00
Aldo Hoeben
7ddd1037a6
Merge branch 'main' into fix_postprocessing_script_folders 2023-04-17 16:39:30 +02:00
fieldOfView
378e5fedea Merge branch 'main' into fix_postprocessing_script_folders 2023-04-15 17:47:36 +02:00
Aldo Hoeben
1924d8c1b0 Continue if there is no scripts folder inside a resource folder 
Co-authored-by: Casper Lamboo <casperlamboo@gmail.com>
 2023-04-15 17:44:09 +02:00