fieldOfView
0966ef5338
Fix QML warnings when switching to an extruder tab
2017-04-21 21:48:20 +02:00
fieldOfView
656e7a8046
Change the scope of the head polygon functions to be inside the main tab
2017-04-21 21:27:15 +02:00
fieldOfView
ba229444b7
Pause autoslicing while the MachineSettingsAction is open
...
Each setting-change would cause a reslice, which is unnecessary.
2017-04-21 21:05:28 +02:00
fieldOfView
4d12ab1296
Merge branch 'master' into feature_multiextruder_machinesettings
2017-04-21 19:31:44 +02:00
Ghostkeeper
2fda85a6aa
Hide estimated time left if print is aborted or completed
...
In fact, only show it if a time estimate is meaningful. We keep showing the estimate while a print is paused though.
Contributes to issue TRI-1550.
2017-04-21 14:29:40 +02:00
Ghostkeeper
fb674ec135
Merge remote-tracking branch 'origin/master'
2017-04-21 14:28:22 +02:00
Lipu Fei
71706a5df5
Merge pull request #1702 from daid/master
...
Only update the target bed temperature, without submitting it to the printer. To prevent race conditions.
2017-04-20 09:40:38 +02:00
daid
50acaaf91f
Some minor changes on review.
2017-04-20 09:35:48 +02:00
Ghostkeeper
16bc9db06d
Simplify gradual infill steps maximum formula
...
The case where it reaches '20' is incorrect, it should never give an error, so it should've been 999999 or something. This case is also overly complex.
Say that P is 'infill_line_distance > 0' and Q is 'spaghetti_enabled'...
Then it would be the logarithmic if (P and not Q)...
Then it would be 0 or 20 if (not (P and not Q)), which is ((not P) or Q)...
Then it would be 20 if (((not P) or Q) and not Q), which is (not P)...
And it would be 0 if (((not P) or Q) and Q), which is Q.
So therefore it can be simplified to: 20 if (not P) else 0 if Q else logarithmic. But 20 became 999999, hence the above formula.
Contributes to issue CURA-3700.
2017-04-19 16:24:39 +02:00
fieldOfView
62f2fe062b
Enable settings when machine_extruder_count is set to 1 but multiple extruders are defined
2017-04-19 16:20:01 +02:00
daid
26a2fb80dc
Only update the target bed temperature, without submitting it to the printer. To prevent race conditions.
2017-04-19 15:01:47 +02:00
Tim Kuipers
50a99eb2b1
fix: dont err on gradual infill when printing hollow (CURA-3700)
2017-04-19 13:50:06 +02:00
Jaime van Kessel
0e381f389a
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-19 13:34:07 +02:00
jack
2cd3565d4b
Merge pull request #1672 from Ultimaker/feature_CURA-3529_upgrade_cura_dir
...
CURA-3529: Set dir names in config to allow UM detect old cura dir
2017-04-19 13:28:49 +02:00
Lipu Fei
7db0f0ebb7
Make toggle button labels clickable
2017-04-19 12:46:25 +02:00
Ghostkeeper
f0d4ea43c2
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-19 10:39:05 +02:00
Ghostkeeper
eed9ea1b3b
Merge branch 'IMADE3D-revise_jellybox_support'
2017-04-19 10:37:56 +02:00
Ghostkeeper
cc23c72124
Merge branch 'revise_jellybox_support' of github.com:IMADE3D/Cura into IMADE3D-revise_jellybox_support
2017-04-19 10:36:20 +02:00
jack
74726e305e
Merge pull request #1698 from Ultimaker/feature_CURA-3574_toggle_button
...
CURA-3574: Use a toggle button mode switching
2017-04-19 10:28:54 +02:00
Jack Ha
232f975092
Removed unused code, added ';' to end of lines. CURA-3574
2017-04-19 10:28:16 +02:00
Ghostkeeper
f91037fb7c
Merge branch 'Rigid3D-master'
2017-04-19 09:30:09 +02:00
Ghostkeeper
58bf3e7ab3
Merge branch 'master' of github.com:Rigid3D/Cura into Rigid3D-master
2017-04-19 09:27:54 +02:00
Lipu Fei
61c4631270
Put sizes and numbers for toggle button into theme
...
CURA-3574
2017-04-19 08:56:11 +02:00
Mehmet Sutas
0637719622
Resized Rigid3D Zero2 Platform STL
...
Resized Rigid3D Zero2 Platform STL
2017-04-18 22:49:50 +03:00
Filip Goc
3c85159b05
swap M109 for M104 in the start gcode
...
It’s necessary to preheat the nozzle before the auto bed leveling
procedure to loosen up leftover filament that may had hardened on the
nozzle.
2017-04-18 20:44:55 +02:00
Lipu Fei
6bf0965632
Adjust toggle button size
...
CURA-3574
2017-04-18 16:52:17 +02:00
Lipu Fei
c75887be80
Use a toggle button for mode switching
...
CURA-3574
2017-04-18 16:40:59 +02:00
Jaime van Kessel
c20542b7b8
Merge branch 'feature_CURA-3540_upgrade_for_project' of github.com:Ultimaker/Cura
2017-04-18 15:33:53 +02:00
Ghostkeeper
f1ac1bd876
Add JellyBox to XML material printer name translations
...
Because the automatic translation removes the underscore, and then the definition can't be found any more.
Contributes to issue CURA-3695.
2017-04-18 15:11:24 +02:00
fieldOfView
4d96e6931d
Store definition changes containers in a folder named definition_changes
2017-04-18 15:08:46 +02:00
Mark
2d14052f4e
Change Label to Text to fix ugly fonts
...
CURA-3389
2017-04-18 13:35:39 +02:00
Mark
8c9eccd1f4
Change Label to Text because of ugle font rendering
...
CURA-3389
2017-04-18 12:11:02 +02:00
Ghostkeeper
7dbb08735a
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-18 10:30:15 +02:00
Ghostkeeper
e33d4693f0
Merge branch '2.5'
2017-04-18 10:30:01 +02:00
Ghostkeeper
9ad85ce235
Move prime tower 1mm down
...
The combination PC-0.4 and PVA-0.8 wouldn't print because the raft was getting so big that it intersected with the prime tower. Moving the prime tower 1mm down allows us to print again.
Contributes to issue CURA-3650.
2017-04-18 10:29:41 +02:00
Lipu Fei
865ab7135a
Merge pull request #1686 from fieldOfView/fix_material_nan
...
Fix NaN values on material print settings tab
2017-04-18 09:52:38 +02:00
Mehmet Sutas
9b0dbdf47c
Rigid3D Zero2 Platform
2017-04-16 01:01:16 +03:00
Mehmet Sutas
b908e3a201
Rigid3D Zero2 Machine Definition
2017-04-16 01:00:27 +03:00
fieldOfView
94545ec4ee
Restore active extruder after forcing an update of the global extruder stack
2017-04-15 20:09:20 +02:00
fieldOfView
6e0221636d
Save definition_changes in their own folder
2017-04-15 20:03:09 +02:00
fieldOfView
813ee65849
Update printer (& disallowed areas) when setting nozzle offsets
2017-04-15 18:58:25 +02:00
fieldOfView
12079fc9da
Add documentation
2017-04-15 18:55:59 +02:00
Ghostkeeper
7151dc0381
Merge branch '2.5'
2017-04-14 17:06:37 +02:00
Ghostkeeper
c3d18bc256
Remove lower warnings for jerk settings
...
It's not a problem to have lower jerk. It'll just print corners quite slow. But sometimes that's necessary, for example for PVA.
Contributes to issue CURA-3650.
2017-04-14 17:06:18 +02:00
Ghostkeeper
9b06d7dd80
Relax warning constraints for top and bottom thickness
...
With very thick layers, fewer layers will still provide enough strength to not sag. 2 is quite a hard minimum though because there are 2 different orientations.
Contributes to issue CURA-3650.
2017-04-14 16:26:14 +02:00
Ghostkeeper
39fbe542b9
Fix font rendering issues in job spec details
...
Labels render with system settings. Text renders with our settings.
Contributes to issue CURA-3389.
2017-04-14 16:08:12 +02:00
Lipu Fei
b3f60c461b
Fix type hinting and function name for upgrade profile
...
CURA-3540
2017-04-14 15:40:18 +02:00
Ghostkeeper
0d793a60fe
Remove duplicate infill overlap setting
...
infill_overlap and infill_overlap_mm were in conflict with each other. Went to the Materials team to resolve it. They say it should be 0.
Contributes to issue CURA-3650.
2017-04-14 15:14:51 +02:00
Ghostkeeper
d6f49d4c12
Merge branch '2.5'
2017-04-14 15:04:05 +02:00
Ghostkeeper
541e28a387
Allow exactly 2 line widths for prime tower
...
We give a warning when it's 2 or fewer lines in the prime tower, but 2 should be allowable. It works quite well.
Contributes to issue CURA-3650.
2017-04-14 14:58:30 +02:00
