Arjen Hiemstra
ec25164731
Cleanup monitoringPrint stuff by properly passing things as properties
...
Instead of relying on the property magically being propagated from the
root object, which causes crashes.
Contributes to CURA-3964
2017-07-04 11:37:04 +02:00
Mark Burton
ff4935011d
Tweak description.
2017-07-04 10:36:45 +01:00
Jaime van Kessel
edeb2fa787
Merge branch 'master' of github.com:Ultimaker/Cura into feature_top_navigation_bar
2017-07-03 16:40:47 +02:00
Lipu Fei
68cae135a9
Make outer wall line width to evaluate its value accroding to its extruder
...
CURA-3891
This commit fixes the problem that limit to extruder for outer wall
doesn't work.
2017-07-03 16:19:10 +02:00
Jaime van Kessel
680cceb6f5
Switching to monitor tab now shows the correct sidebar again
...
CURA-3964
2017-07-03 16:12:19 +02:00
fieldOfView
5fec3d4f6d
Replace mock borders with true borders
2017-07-03 16:04:18 +02:00
Jaime van Kessel
7e07482dec
Added topbar to Cura
...
CURA-3964
2017-07-03 15:44:42 +02:00
Lipu Fei
848c607db1
Only enable gradual support if support infill rate > 0
...
CURA-2724
2017-07-03 11:11:26 +02:00
Tim Kuipers
60379d395d
feat: spaghetti infill stepping vs all volume at once (CURA-3861)
2017-06-30 17:59:47 +02:00
Lipu Fei
7b494cccf7
Only enable gradual_support_infill_steps when support infill density > 0
...
CURA-2724
2017-06-30 15:49:37 +02:00
Lipu Fei
328ec0419d
Implement gradual support infill
...
CURA-2724
2017-06-29 17:42:09 +02:00
Ghostkeeper
b8b23055ba
Fix getting new material diameter
...
Same problem, it's not been updated yet at this point.
Contributes to issue CURA-2822.
2017-06-29 16:50:15 +02:00
Ghostkeeper
27bcb11dc9
Store old approximate diameter in variable
...
Shorter line, easier to read.
Contributes to issue CURA-2822.
2017-06-29 16:41:24 +02:00
Ghostkeeper
b3e49f0c12
Fix getting the old approximate diameter
...
The properties.approximate_diameter gets updated later via signals, so at this point it's not correct yet.
Contributes to issue CURA-2822.
2017-06-29 16:28:01 +02:00
Ghostkeeper
c7120dddda
Don't allow changing the default printing temperature per mesh
...
The printing temperature is not settable per mesh. The default printing temperature shouldn't be either.
2017-06-29 14:16:02 +02:00
Jaime van Kessel
4a5b1d0760
Merge branch 'feature_xy_offset_layer_0' of https://github.com/fieldOfView/Cura
2017-06-28 15:16:18 +02:00
PCDotFan
57503439dd
Merge remote-tracking branch 'Ultimaker/master'
2017-06-28 18:32:14 +08:00
fieldOfView
20b2a3dc81
Improve description for xy_offset_layer_0
2017-06-28 11:48:16 +02:00
Jaime van Kessel
b7165ad41d
Merge branch '2.6' of github.com:Ultimaker/Cura
2017-06-28 10:56:43 +02:00
PCDotFan
ef6945b14a
Merge remote-tracking branch 'Ultimaker/master'
2017-06-28 00:12:53 +08:00
PCDotFan
4d981810dd
update fpmprinter.def.json.po
2017-06-28 00:12:50 +08:00
Ghostkeeper
ebdcd46062
Rename other quality profiles to old not-supported names
...
The Superdraft quality was sometimes still active in users' old configuration as well.
Contributes to issue CURA-3973.
2017-06-27 16:41:58 +02:00
Ghostkeeper
21624d7761
Merge branch '2.6'
2017-06-27 16:25:55 +02:00
Ghostkeeper
f30d150ead
Rename CPE+ and PC draft prints to Not Supported
...
It's a hack. But it prevents having to write an upgrade script for this.
Contributes to issue CURA-3973.
2017-06-27 16:13:47 +02:00
Jaime van Kessel
4370e3a13c
Added zoom to mouse preference
...
https://github.com/Ultimaker/Cura/issues/1572
2017-06-27 15:41:17 +02:00
Ghostkeeper
8d3095c3b3
Merge branch '2.6'
2017-06-27 13:37:41 +02:00
Ghostkeeper
c66740d8e4
Increase warning value for Number of Slower Layers further
...
Because it was still giving a warning for the 0.4mm layer height profile.
Contributes to issue CURA-3960.
2017-06-27 13:23:30 +02:00
Ghostkeeper
5f5eb0b2a8
Merge branch '2.6'
2017-06-27 11:01:42 +02:00
Ghostkeeper
cb4e58c6f7
Increase the maximum warning for speed_slowdown_layers
...
Also round the resolved value, because the result needs to be an integer.
Contributes to issue CURA-3960.
2017-06-27 11:01:21 +02:00
Jaime van Kessel
b9c71a34eb
Merge branch '2.6' of github.com:Ultimaker/Cura
2017-06-27 10:10:59 +02:00
Ghostkeeper
ca7992875a
Add 'Not Supported' profile for Polypropylene 0.25mm
...
Previously we also called the ID 'Not Supported' but we decided against that for new profiles, since that would mean that if the profile ever becomes supported we'd have to do a rename of the user's file names in their settings via a version upgrade. So now the ID is as if it's supported but the user-visible name still says that it's Not Supported and the profile still becomes orange.
Contributes to issue CURA-3960.
2017-06-27 09:32:17 +02:00
Ghostkeeper
264e09bdaf
Update Japanese translations
...
These have not been tested or even opened yet at this point, but by the time I've pushed the commit they will be. This should fix the missing translation and inconsistent wording.
Contributes to issue CURA-3950.
2017-06-27 08:47:22 +02:00
Ghostkeeper
a8da2407c7
Fix link to pp instead of polypropylene
...
The material profile was renamed but that wasn't put through here.
Contributes to issue CURA-3960.
2017-06-27 08:44:28 +02:00
PCDotFan
17a7bd7ae9
Add 简体中文 to GeneralPage.qml
2017-06-27 10:29:21 +08:00
PCDotFan
7e222ed16a
update fdmextruder.def.json translation
2017-06-27 10:23:47 +08:00
PCDotFan
d476a8eace
update chinese translation
2017-06-26 23:43:11 +08:00
Ghostkeeper
ee0918f1d0
Merge branch '2.6'
2017-06-26 17:23:57 +02:00
Ghostkeeper
36cc21d31b
Rename Polypropylene to PP
...
They changed their mind.
Contributes to issue CURA-3960.
2017-06-26 17:20:59 +02:00
Jaime van Kessel
4ceb9f95cc
Fixed weights of a few profiles
...
CURA-3845
2017-06-26 16:43:12 +02:00
Jaime van Kessel
b58abc91b3
Fixed names of 2 pp profiles
...
CURA-3960
2017-06-26 16:42:58 +02:00
Tim Kuipers
d31cacb69a
Merge branch 'feature_prime_tower_purge'
2017-06-26 16:32:49 +02:00
Ghostkeeper
cefbe54843
Fix double infill overlap settings
...
These settings say the same, only the infill_overlap_mm one overwrites the infill_overlap setting. I therefore removed infill_overlap_mm so that the mm gets auto-calculated and none of the settings are overwritten any more (so they don't get greyed out).
Contributes to issue CURA-3960.
2017-06-26 16:30:26 +02:00
Jaime van Kessel
93f4a7e399
Fixed weights of a few profiles
...
CURA-3845
2017-06-26 16:28:53 +02:00
Ghostkeeper
a259217f52
Remove gradual infill for PP
...
This was delivered false by the materials team. It seems that in the end they decided to not use gradual infill for PP but only made the change in UM3, not UM2+. Removing gradual infill also requires me to set the infill density to 20% (the default).
Contributes to issue CURA-3960.
2017-06-26 16:15:40 +02:00
Tim Kuipers
e1d98d22f0
Merge branch 'master' into feature_prime_tower_purge
2017-06-26 16:11:41 +02:00
Lipu Fei
8a0afa9c32
Enable prime tower purge volume when prime tower and wipe are both enabled
2017-06-26 15:54:56 +02:00
Ghostkeeper
a5f3a1c983
Remove maximum warning for gradual infill step height
...
That 100mm figure was weird. 9cm was fine, but 10cm not? It's all going to print fine, really.
Contributes to issue CURA-3960.
2017-06-26 15:53:40 +02:00
Ghostkeeper
aee0cf7207
Make expand_lower_skins inherit from expand_skins_into_infill
...
And then also update the profiles to make the profiles end up at what it was originally (I confirmed this with the materials team).
Contributes to issue CURA-3960.
2017-06-26 15:47:49 +02:00
Ghostkeeper
b617c8be9c
Remove minimum warning value for z-hop height
...
It was giving a warning for 0.8mm polypropylene because that was set to 0.5mm hop. It was decided that a minimum value at all for z-hop is nonsense because you can just disable z-hop without getting a warning. I'm still setting it to zero because negative will still go wrong in your print.
Contributes to issue CURA-3960.
2017-06-26 15:27:27 +02:00
fieldOfView
d1211e3951
Add a setting for Horizontal Expansion for the first layer
2017-06-26 15:16:26 +02:00
