Removed the ContentAlignment enum in ToolTip in favour of using the Text.ContentAlignment enum. For some reason references to this enum fail everywhere when ToolTip is moved into Uranium. There is some evil time-wasting magic cast on this component!
CURA-8943
Conflicts:
cura/PlatformPhysics.py -> Removed shapely on master, while QTimer import got updated to Qt6.
plugins/Toolbox -> Entire folder is deleted in master, but it was updated to Qt6 here. This can all be removed.
It turns out this has been broken for a while. I don't think anyone adds that many scripts that they'd need to scroll this, but if they want to they can now.
Contributes to issue CURA-8686.
- Capitalization for camelCase.
- Indentation.
- We don't really even _have_ a concept of what a 'Beta' for a script is, and this was a unilateral descision from a single contributor instead of validated by the proper channels like QA, V&V, etc.
- Pretty sure that while those labels aren't used _within_ Cura proper, other people (and maybe plugins?) rely on them for (further)post-processing. Also the distinction between CAZO and CAZD was lost.
part of CURA-8655
Yes, it's my name. I'm okay with people learning that if they are really looking. I'm less okay with search engines learning that. Removing my name here linked to my nickname will eventually cause search engines to unlink it too.
While testing I noticed that the movement after the pause will
first move the head down and then move to the position before
the pause. This could result in noticeable artifacts or
accidentally push thin towers from the bed.) See the code below.
```gcode
;TYPE:CUSTOM
;added code by post processing
;script: PauseAtHeight.py
;current z: 5
;current height: 5.0
M83 ; switch to relative E values for any needed retraction
G1 F300 Z6 ; move up a millimeter to get out of the way
G1 F9000 X190 Y190
G1 F300 Z20.0
M84 E0
@pause now change filament and press ; Do the actual pause
G1 F300 Z5
G1 F9000 X30.759 Y30.759
G1 F1800 ; restore extrusion feedrate
```
I have switched the lines in the script such that it will first move to the correct X, Y and then move down
```python
prepend_gcode += self.putValue(G = 1, X = x, Y = y, F = 9000) + "\n"
prepend_gcode += self.putValue(G = 1, Z = current_z, F = 300) + "\n"
```
As shown in the code below
```gcode
;TYPE:CUSTOM
;added code by post processing
;script: PauseAtHeight.py
;current z: 5
;current height: 5.0
M83 ; switch to relative E values for any needed retraction
G1 F300 Z6 ; move up a millimeter to get out of the way
G1 F9000 X190 Y190
G1 F300 Z20.0
M84 E0
@pause now change filament and press ; Do the actual pause
G1 F9000 X30.759 Y30.759
G1 F300 Z5
G1 F1800 ; restore extrusion feedrate
```
