Diego Prado Gesto
b6e997c88d
CURA-4526 Delete LayerView plugin because it will be replaced with the
...
SimulationView.
This commit also adapts the code in order to accept the messages coming
from the engine, with information about feedrates and line thicknesses.
Add also some changes in the GCodeReader that reads feedrates and
line thickness from the gcode file.
2017-11-21 10:47:29 +01:00
Ruben D
6d2bcd9b3e
Fix error message when slicing with per-object setting errors
...
The message was generating a list of settings that had an error state by going through all extruder stacks and the global stack, but didn't bother to check the per-object stacks. I could've added it to the regular message but then the user would be confused because he can't find any errors either. So instead I opted to specify that it happened in per-model settings. It's not perfect, but should narrow down the user's search considerably.
Fixes #2427 .
2017-11-20 01:55:57 +01:00
Ruben D
c61b9c41ab
Fix translation of Unable to slice message
...
Previously the {0} would be filled in at runtime, causing the translation to no longer be found in the catalogue.
Contributes to issue CURA-4091.
2017-11-06 03:55:49 +01:00
Lipu Fei
9996c829d8
Only schedule re-slice when there is none in progress
...
CURA-4427
After the stack error check is done, only schedule a re-slice when there
is none in progress and a re-slice is needed.
2017-10-10 08:50:22 +02:00
Mark
9a193ad5c5
Changing AGPLv3 to LGPLv3
2017-09-28 13:00:43 +02:00
Jaime van Kessel
ade1c039ea
Print information not being set won't cause crash anymore
2017-09-20 11:03:20 +02:00
Jaime van Kessel
a3b6ced5e5
Changed titles of unable to slice messages
...
This makes it a bit clearer what is going on and what the "source" of the message is.
CURA-4332
2017-09-18 15:30:40 +02:00
Ghostkeeper
6083989777
Merge branch 'master' of github.com:Ultimaker/Cura
2017-09-15 09:32:15 +02:00
alekseisasin
98ab571483
Removed 14bitVoid code accord to a new LGPL license
...
CURA-4232
2017-09-14 18:03:31 +02:00
Ghostkeeper
bf96be3ab2
Improve titles for slice failure messages a bit
...
The previous ones were very vague.
2017-09-14 16:40:20 +02:00
alekseisasin
204019702d
Added Title for messages
...
CURA-4203
2017-09-13 13:58:08 +02:00
Lipu Fei
c37782d544
Stop slicing when a new slice is needed
...
CURA-4206
2017-08-23 17:19:48 +02:00
Lipu Fei
05879e0dfc
EngineBackend should trigger auto-slice on changes
...
CURA-4107
CuraEngineBackend should trigger auto-slice on value changes, not
changes on the active extruder.
2017-08-01 09:39:35 +02:00
Lipu Fei
439f3e5029
When an error check finishes, only trigger auto-slicing if needed
...
CURA-4092
Many things can trigger an error check, but Cura should only auto-slice
if the error check was scheduled due to a value change.
2017-07-27 10:20:06 +02:00
Lipu Fei
c16bfa8949
Remove unnecessary if checks
...
CURA-4048
2017-07-27 09:54:30 +02:00
Lipu Fei
9fca677d40
Fix comment location
...
CURA-4048
2017-07-27 09:52:05 +02:00
Lipu Fei
d9d39c41df
Fix auto-slicing upon value changes and error checks
...
CURA-4092
- Keep the error check finished signal.
- Restore the old way of triggering an auto-slicing which depends on a
setting value change singal.
- Add a mechanism to make sure that if there is an error check, the
auto-slicing will only be triggered after the check finishes.
2017-07-27 09:03:06 +02:00
Lipu Fei
9c1d23fe5b
Make sure MachineManager initializes after ContainerRegistry does
...
CURA-4084
When MachineManager gets created, it will find and set the current
active machine. This requires the ContainerRegistry to be initialized
first.
2017-07-26 14:09:18 +02:00
Lipu Fei
93731b8d1f
Trigger auto-slice based on stackValidation instead of stack/setting changes
...
CURA-4084
Stack error checks are scheduled with a delay, and when a container is
changed (e.g. Quality), the auto-slice may get triggered before the
error check is done. Because the error check result is cached, the
auto-slicing will use the previous result instead of new. So, the
auto-slicing should be triggered when a stack validation is finished
instead of when a stack/setting gets changed.
2017-07-26 14:09:18 +02:00
Ghostkeeper
32ea311762
Merge branch 'time_estimate_per_feature' of https://github.com/14bitVoid/Cura into 14bitVoid-time_estimate_per_feature
2017-05-11 09:53:50 +02:00
Ghostkeeper
a9813146c4
Evaluate global stack first
...
The global stack has 99% of all settings. So most of the times the setting definition we are looking for is here. This should make it a bit faster to find.
Contributes to issue CURA-3772.
2017-05-08 13:35:28 +02:00
Ghostkeeper
281a01dd1f
Remove unused variable
...
Contributes to issue CURA-3772.
2017-05-08 13:35:28 +02:00
Ghostkeeper
2137c30bd6
Also check extruders for definitions of error settings
...
Contributes to issue CURA-3772.
2017-05-08 13:35:28 +02:00
Ghostkeeper
e19d5411c2
Expand log message when getting no definition when listing error settings
...
So that someone reading the log gets a clue where the error message occurs and why.
Contributes to issue CURA-3772.
2017-05-08 11:17:37 +02:00
Jaime van Kessel
63eceda75e
Added handling for if definition for error handling was not found
...
CURA-3772
2017-05-08 10:28:31 +02:00
14bitVoid
f15aa66751
Receive time estimates per feature
2017-05-05 00:05:17 +02:00
Victor Larchenko
4f446bfcbc
Added filament cost keyword replacement
2017-04-27 16:44:43 +06:00
Victor Larchenko
e47ca7a68d
Merge remote-tracking branch 'um/master' into gcode-keywords
2017-04-21 14:36:22 +06:00
Jack Ha
1029fb4ddd
Not to trigger reslice happy anymore, only retrigger if necessary. Also using isSliceable instead of property check when inspecting root node. CURA-3413 CURA-3412
2017-03-02 16:38:31 +01:00
U-ULTIMAKER\j.ha
c54d5ce707
Fixed compatibility mode active extruder. CURA-3321
2017-03-02 13:15:29 +01:00
Jack Ha
8a8b97d371
CuraEngineBackend now properly postpones onSceneChanged instead of ignoring some. CURA-3413
2017-03-01 11:45:50 +01:00
Jack Ha
0eec48b9e3
Fix reslice when deleting nodes, fix moving groups. CURA-3412
2017-03-01 10:53:53 +01:00
Jack Ha
bb955ca5ab
Tickle the backend if per object settings are changed. CURA-3273
2017-02-21 16:12:25 +01:00
Jack Ha
057dc2fd7d
Solved merge conflicts. CURA-3214
2017-02-21 11:01:20 +01:00
Jack Ha
5a76c92dda
Small improvements: rename, log message, QObject parent, return value. CURA-3214
2017-02-21 10:52:56 +01:00
fieldOfView
9229027001
Refactor properties that start with 'get' to avoid confusion between slots & properties
...
Case in point: LayerViewProxy.getLayerViewType was decorated as a property but was used/intended as a slot.
2017-02-17 13:35:01 +01:00
Jack Ha
74ce600978
Comments and removed logs. CURA-3214
2017-02-16 15:23:31 +01:00
Jack Ha
600a5d85e4
Added comments, changed text of NotStarted. CURA-3214
2017-02-16 15:07:26 +01:00
Jack Ha
18318348b6
Fixed last bugs in manual slicing. CURA-3214
2017-02-16 14:44:45 +01:00
Jack Ha
464bf73f85
Made backend available in qml, calling forceSlice and stopSlicing directly. CURA-3214
2017-02-16 10:56:01 +01:00
Jack Ha
db984561e9
Almost done with manual and auto slicing. CURA-3214
2017-02-15 16:02:14 +01:00
Jack Ha
94badb1b9f
Fix auto slice after startup. CURA-3214
2017-02-15 13:51:24 +01:00
Jack Ha
ca84fdd767
Merge branch 'master' into feature_auto_slice
2017-02-15 12:42:09 +01:00
Jack Ha
4e65a7034f
Added switch for using timer and no timer in CuraEngineBackend. Still have to fix TODO and finish. CURA-3214
2017-02-15 10:32:38 +01:00
Simon Edwards
92cee4a9d7
Merge branch 'master' into python_type_hinting
2017-02-13 16:31:31 +01:00
Jaime van Kessel
fce9df756c
Fixed pause slicing not working when moving an object
...
CURA-3361
2017-02-10 11:43:38 +01:00
Jack Ha
3d1e5a84fc
Added PauseBackendPlugin, added to changelog. CURA-3361
2017-02-09 17:19:59 +01:00
Jack Ha
c2bf88751e
Enable functions pauseSlicing and continueSlicing in combination with BlockSlicingDecorator. CURA-3361
2017-02-09 16:06:36 +01:00
Victor Larchenko
7c3728632f
T576: Added {jobname} keyword
2017-02-02 15:29:14 +06:00
Victor Larchenko
67aae55640
T576: Added print statistics
2017-02-02 15:28:57 +06:00
