We created a new set of icons for Cura. These icons had to be reverted though because they weren't working out in the interface for the last release yet.
This unreverts them, basically adding them back hoping that we'll get them fixed in time for the next release.
Contributes to issue CURA-8342.
Revert "Revert "Fix merge conflict""
This reverts commit bb20e3307f43edc1ff53cb154d2351ddfe39e158.
Revert "Revert "Merge pull request #9716 from Ultimaker/CURA-8010_new_icons""
This reverts commit 70e4e9640e561e18a12870f30c905203ce8ccee7.
Revert "Revert "Fix typo in icon name""
This reverts commit 38ce22ba7c3f40b971bc6e1e0a8e776ca9d51512.
Revert "Revert "Add list for deprecated icons""
This reverts commit 119a957e7f978dbf1ddbcb3b0005bf38e8fed943.
Revert "Revert "Add Function icon""
This reverts commit 760726cf0bb953bb1b0fc277b448f419d4bd2544.
Revert "Revert "Switch out inherit icon""
This reverts commit 26afff609381e2004d194c280f504b6226859bd3.
Revert "Revert "Merge branch 'CURA-8205_Introduce_new_icons_in_Cura' of github.com:Ultimaker/Cura""
This reverts commit 6483db3d47ee052c1a966cdee3af7190577a5769.
Revert "Fix incorrect icons"
This reverts commit 02a4ade2a50a943ff36fd4895bdc9261cf2133eb.
The setting influences support meshes. If support was disabled but there was a support mesh, this setting would influence the slice result even if it was invisible.
Fixes#10002.
Technically, moving the feeder wheel by 1mm doesn't guarantee that the filament gets extruded by 1mm, since there might be slip.
Reported in issue #9924.
Revert "Change file extension to .umm"
This reverts commit 56db7f7144083df4bca77746d7ee30f2a54fda36.
Revert "Re-enable compression"
This reverts commit 62bc9be22bbc5595dbfce69893163c3a0ebc4415.
Revert "Add documentation"
This reverts commit e9031f1aff5d40f3c69ac625edf11963a3253eb8.
Revert "Fix writing bytes to string-stream"
This reverts commit 66b2825a667f9aa9618005d2a5875383a3658f4f.
Revert "Hide button entirely if no export is available"
This reverts commit ec727e1068c3ac2cab7f95fb88c5d4d101e28e17.
Revert "Basic implementation of exporting all materials in a .zip archive"
This reverts commit bdcaef134f556f455f352786123476ec40e3ae4c.
Revert "Implement default path for exporting all materials"
This reverts commit e66783664bf73dd9b1e3c6af6f01321763470d2e.
Revert "Implement a sync button and file dialogue to export all materials"
This reverts commit abba3bdd10a994a1b38bcb426a27ba379febeac7.
Revert "Add notion of whether printers support the material export archive"
This reverts commit f436cb8e7b879a8913b25f2a049413ec0721f1c5.
Some contributors seem to have a shift key stuck here or there. Many 'stylised' capitalisations weren't reflected even on the manufacturer's websites, or were also stylising words like 'pro' and 'dual' or even actual chemical names like 'nylon'. Normalising the caps makes it more fair for everyone, since all of these are written in the same font.
As discussed with the Cura team.
- Travel avoid supports
- Dual Extrusion : switch_extruder_retraction_amount = 10
- PETg updates
- Reduced infill jerk in "quick" intent and removed useless first layer jerk
- Removed no more used 1.2x material_flow_layer_0 in order to compensate a bad bed leveling
- Rewiewed forced PLA and PETg temperatures
Remove start G-code from Flying Bear Ghost 5 because it was causing positioning problems during Power-loss Recovery
Update machine_start_gcode and machine_end_gcode for Flying Bear Base
Update machine_height for Flying Bear Ghost 4S / 5 to a safe value
It's also used as the speed at which layer changes are made, so technically it should be kept visible since the setting does indeed affect the g-code.
In practice, it won't affect the print though. Using a reasonable Z hop speed of 10mm/s and the default acceleration of 100mm/s/s, it would take 0.1s to reach the Z hop speed. With the formula for acceleration, 1/2att+vt+c, you can see that it needs 0.5mm to get up to speed, and another 0.5mm to get back to 0. So this speed is only attained with layer heights of more than 1mm which is very unrealistic. For this reason we won't document this in the setting description or its name. The Z hop speed is only used for layer changes because it needs a sensible default for extreme cases, not because it needs to be configurable as such.
But we'll keep it visible to give a less-than-expert user a feeling of control, a placebo effect that they are actually making print quality improvements even if their firmware forbids it from making an actual difference.
FixesUltimaker/CuraEngine#1446.
This was done as part of merging the printer. Since the issue is so small
I decided to fix it right away instead of bouncing it back & forth with the
original author
CURA-8221
