This is the default (preferred) nozzle for the FABtotum Personal Fabricator.
Apparently when these nozzle profiles were added, the existing quality profiles weren't considered. We'll now put them on the nozzle size that the FABtotum printer had before the nozzle profiles were added. There is also the Pro nozzle for FABtotum but I think the Lite is more likely what the profiles were originally made for, since that is the default.
Normally we'd require contributors to submit up-to-date profiles but in this case they did, we were just slow to respond.
Contributes to issue CURA-7757.
* Added BIQU machine base files as well as BIQU B1 machine files.
* Fixed a variants settings version error.
* Updated base def by removing excluded materials and changing the pref to pla175
* Fixed the machine name value which should only take a default value and not also a value.
* Increased the max extruder feedrate to allow the default retraction speed.
* Removed comments from the quality profiles. Removed author from variants. Adjusted materials in quality profiles to refer to the 175 profiles directly.
* Enabled coasting by default in the B1 profile and increased the width of infill for the base profile.
* Updated all quality and variants configs to use settings version 16 in anticipation of release 4.8
* Final tweaks to B1 start gcode
* Added an ABL version of the B1 with tweaked start codes.
Can keep the CPUoccupied for a long time with higher values. Decided that very few people will need that many layers anyway. Rather than complete defer, at least warn people something might be up.
a 5-min. fix
* Add Creality CR-6 SE definition
Also did a few changes in the creality base.
* Add Creality CR-6 SE Nozzle variants
* Update creality_base.def.json
Reverted back to the 4.7 base file
* Update creality_cr6se.def.json
* Update creality_cr6se_0.8.inst.cfg
* Update creality_cr6se_0.6.inst.cfg
Updated to version 16
* Updated to version 16
* Updated to version 16
* Update to version 16
* Update to version 16
* Update to version 16
* Add files via upload
* Add files via upload
* Add files via upload
* Update fusedform_300_draft_abs.inst.cfg
* Add files via upload
* Delete fusedform_300_draft_abs.inst.cfg
* Delete fusedform_300_draft_pla.inst.cfg
* Deletion of old files
* changes in STD quality profiles
* Changes in mini quality files
* Changes in FF600 quality files
* changes in machine definition name
* Changes in definition files
* extruder and definition linking
* ff300 inherits and extruder def
* Update fusedform_300.def.json
* category deprecation in definitions
* inherits
* ff300 extruder definition machine
* extruder machine definitions
* Fused form FF600plus machine profiles
* PETG profiles
* Update fusedform_300.def.json
* changes in start gcode
* machine configuration dynamics on definitions
* speed adjustments
* dynamics modification in petg and flex quality
* Further adjustments on dynamics definitiosn
* Modification of all files under inherits data structure.
* Quality setting version 15 to 16
* These changes are for limiting quality types in the materials defined
* Quality Modification under Global and Material specific structure
Global quality structures and material specific definitions under the global structures
This alias shouldn't be written any more since the firmware misinterprets the setting value and errors when it's more than 100%.
Contributes to issue CURA-7724.
Since the prime tower for other extruders is now folded into one instead of alternating the layers, you need to have enough diameter to print all extruders, not just the current extruder.
Fixes one side-issue mentioned in #8148.
In cases where a staging build is created this hardcoded value would cause confusion, since it would always point the user to the production environment.
When importing a profile that doesn't much the current nozzle combination (e.g. importing a 'high'
quality when we have AA0.8 and AA0.4 nozzles), the profile was being accepted and a success message
was shown to the user, but the quality did not show up in the profile list.
This commit fixes that by accepting the quality profile and informing the user that the profile is
not visible due to the current configuration.
CURA-7691
A printer was added in the meantime that had setting_version = 15, which was leading to failing
tests, considering that this PR has changed the setting version to 16.
CURA-7118
These groups were not considered because they are not sliceable. Their children are sliceable, so I could just use a DepthFirstIterator. However their group computes the AABB correctly also, so taking the AABB of the group is more efficient.
Contributes to issue CURA-7118.
The convex hulls for groups are already constructed from the convex hull of the convex hulls of all of their children. Since the children's convex hulls are already scaled, we don't want to scale it again for the group.
Contributes to issue CURA-7118.
This should prevent a crash when saving to a path that the file system doesn't support (because of e.g. disallowed symbols in the file name).
Instead it will now show an error message to the user.
Fixes Sentry issue CURA-157.
This is a bit of defensive coding. If the position is out of bounds for Cura it should now ignore those extruders.
This could be due to broken firmware, or maybe someone MITM-ing the connection and changing it, or perhaps because the printer was changed while the sync was ongoing? Whatever the cause, it now puts a warning in the log about it and doesn't crash any more.
Fixes Sentry issue CURA-156.
As discussed, this is a method to prevent leaking personally identifiable information through crash reports, while still keeping the useful information for the developers on how widely spread the crashes are.
