Jaime van Kessel
a9bad453a6
Merge pull request #11696 from Ultimaker/CURA-9044_show_italic_for_active_profile
...
Remove reference to Cura in UM component
2022-03-21 13:33:18 +01:00
Ghostkeeper
e715017545
Adjust description of Change Retraction for rel. extrusion
...
A patch-up until we have a real solution, as suggested in #11487 .
2022-03-20 19:49:12 +01:00
j.delarago
a3892c8147
Remove reference to Cura in UM component
...
Add isActiveModelFunction that can be overwritten in inheriting components
Override isActiveModelFunction in Profiles page, this is done because quality models do not have a unique id that can be assigned to activeId
CURA-9044
2022-03-18 16:44:56 +01:00
Remco Burema
17e18e76d7
Merge pull request #11639 from Ultimaker/more_intuitive_line_thresholds
...
More intuitive line thresholds
2022-03-17 14:55:59 +01:00
Joey de l'Arago
fcfc47920f
Merge pull request #11674 from Ultimaker/CURA-9039_combobox_open_out_of_window
...
[CURA-9039] fix combobox scrolling out of view
2022-03-17 07:46:56 +00:00
Jaime van Kessel
40fc587d64
Merge pull request #11675 from Ultimaker/PP-115_unify-wall-thickness
...
PP-115_unify-wall-thickness
2022-03-16 17:04:22 +01:00
Remco Burema
7dfcac7bbe
Merge pull request #11663 from Ultimaker/CURA-9007_burger_menu
...
[CURA-9007] Update Burger Menus
2022-03-16 15:59:32 +01:00
Jaime van Kessel
f0bfe4f3a2
Merge branch 'PP-126_set_horizontal_expansion' of github.com:Ultimaker/Cura
2022-03-16 15:53:32 +01:00
Remco Burema
f4e57b82f8
Merge pull request #11664 from Ultimaker/CURA-8921
...
[CURA-8921] Workaround for windows not giving dialogs the correct width.
2022-03-16 15:29:32 +01:00
Remco Burema
51752d162c
Merge pull request #11635 from Ultimaker/CURA-8981_resolve_for_interface_and_raft_extruder
...
Add resolve values for raft & interface extruders
2022-03-16 14:46:20 +01:00
j.delarago
84d7443c18
Change OnYChanged out for OnPositionChanged inside scrollbar. Makes a bit more sense logically and this can be reused in ScrollViews as well.
...
Added OnPositionChanged to General Page
CURA-8979
2022-03-16 13:59:22 +01:00
Jaime van Kessel
daa4c20df4
Use intConversion instead of Str for extruder & optionalExtruder
...
CURA-8981
2022-03-16 11:08:28 +01:00
Jaime van Kessel
0388dad59f
Merge pull request #11671 from Rolzad73/master
...
- fixed snapmaker2 End-Gcode definition for Z return variable
2022-03-16 09:44:50 +01:00
Rolzad73
5a12265446
- fixed snapmaker2 End-Gcode definition for Z return variable
2022-03-15 16:56:06 -04:00
Jaime van Kessel
d8f6173dd9
Merge pull request #11660 from Ultimaker/CURA-8890_combobox_width
...
[CURA-8890] combobox width
2022-03-15 16:51:02 +01:00
Jaime van Kessel
74e46c6009
Merge branch 'CURA-8945_spinbox_behaviour' of github.com:Ultimaker/Cura
2022-03-15 16:44:57 +01:00
Rijk van Manen
d9cc755f94
restore old top_bottom_thickness
...
Since we changed wall thickness, but do not want to change the top_bottom_thickness these values need be set hardcoded. PP-115
2022-03-15 16:43:14 +01:00
Rijk van Manen
cf7f48f622
forgot to remove one statement
...
PP-115
2022-03-15 16:26:15 +01:00
Jaime van Kessel
5fe6f0d1ac
Merge branch 'CURA-9007_burger_menu' of github.com:Ultimaker/Cura into CURA-9007_burger_menu
2022-03-15 14:45:04 +01:00
Jaime van Kessel
7148ca5d06
Fix poup rescaling the burgermenu weirdly
...
CURA-9007
2022-03-15 14:42:53 +01:00
j.delarago
495462182c
Move background circle into background
...
Change burger icon color to correct color for dark+light mode
CURA-9005
2022-03-15 14:08:28 +01:00
Rijk van Manen
bf131f539e
remove all wall_thickness statements
...
All print profiles are following the global rules, no print profile specific exceptions. PP-115
2022-03-15 13:48:41 +01:00
Jaime van Kessel
1ef797a744
Merge branch 'CURA-9039_combobox_open_out_of_window' of github.com:Ultimaker/Cura
2022-03-15 13:24:25 +01:00
Rijk van Manen
1bf6243b69
For 0.25 profile increase wall line count to 3
...
With this equation the wall thickness better matches the thickness we had before CURA5.0. PP-115
2022-03-15 09:45:20 +01:00
Rijk van Manen
943e126cb4
set wall thickness to two lines by default
...
With this equation the wall line count is two by default and exactly matches the wall thickness that will be printed. PP-115
2022-03-15 09:44:05 +01:00
j.delarago
067cdda401
Add missing UM import
...
CURA-9005
2022-03-15 09:05:38 +01:00
j.delarago
b04fabb27a
Remove focus from SettingItems when scrolling.
...
This fixes the issue where you can scroll combobox dropdowns out of the settingView.
CURA-9039
2022-03-14 17:33:48 +01:00
j.delarago
8a182b1f3f
Workaround for windows not giving dialogs the correct width.
...
CURA-8921
2022-03-14 16:41:53 +01:00
j.delarago
ff824b718c
Replace burger buttons with generic BurgerButton.qml component.
...
Move comment onto newline (Comments on the same line as component names break text folding)
Update burger menu margins in SettingView to match design
CURA-9007
2022-03-14 16:14:57 +01:00
j.delarago
0b82e9ef31
Remove focus from TextField when incrementing/decrementing using buttons.
...
This fixes the issue where the value that was in the textfield before typing would be incremented instead, if the textField had active focus.
CURA-8890
2022-03-14 14:29:11 +01:00
j.delarago
0ba4dbacc4
Make combobox_wide much wider and swap out existing uses of combobox_wide for combobox.
...
CURA-8890
2022-03-14 13:13:30 +01:00
Jaime van Kessel
c6326eff64
Ensure that "update profile" button in preferences has correct enabled state
...
CURA-9023
2022-03-14 11:56:45 +01:00
Jaime van Kessel
0084001e2f
Remove . from button string
...
CURA-9023
2022-03-14 11:47:19 +01:00
Jaime van Kessel
97732336e3
Increase width of dropdown boxes in general page
...
CURA-8990
2022-03-14 11:42:50 +01:00
Jaime van Kessel
ea03236f03
Remove unneeded font assignment
...
The default font is, you guessed it, already default.
2022-03-14 11:40:05 +01:00
Jaime van Kessel
790c2c23c1
Display profile name correctly in dropdown
...
CURA-9040
2022-03-14 11:38:31 +01:00
p.kuiper
a88cb2bb48
I accidently deleted the files while testing the profile changes and committed without them. Restored the files.
...
Relates to PP-126
2022-03-14 11:22:30 +01:00
p.kuiper
6f36998feb
Moved the horizontal layer expansion correction (corrects for the bulging of the extruded beads) from the engineering intent profiles to the default profiles for all ultimaker machines (ultimaker.def.json). This will improve the dimensional accuracy of the default, visual and draft intents.
...
Relates to PP-126
2022-03-14 10:53:03 +01:00
Ghostkeeper
cfeb5101e7
Reset Max Skin Angle for Expansion to 90
...
It has been found that the 20 degree leads to overhangs that this printer doesn't handle well.
Fixes #11553 .
2022-03-14 02:37:14 +01:00
Jaime van Kessel
22f9b2a0ec
Increase the indentation margin for settings
...
CURA-8921
2022-03-11 15:38:34 +01:00
Casper Lamboo
50bf87a41d
Merge pull request #11622 from Ultimaker/CURA-9005_restyle_print_setting_category
...
[CURA-9005] Restyle print setting category
2022-03-11 14:01:15 +01:00
Casper Lamboo
60f7b2dccb
Merge branch 'master' into CURA-9005_restyle_print_setting_category
2022-03-11 13:43:33 +01:00
casper
1b976693dc
Remove dangling comment
...
CURA-9005
2022-03-11 13:13:25 +01:00
casper
5701f42d63
Move CategoryButton
to cura repo
...
CURA-9005
2022-03-11 13:11:36 +01:00
Ghostkeeper
25e914b1cb
Fix checkbox for automatic plug-in update checking
...
The checkbox was still there in the preferences page, but it didn't work at all, for two reasons:
- The preference entry didn't exist. This was causing warnings in the log (which is why I saw it).
- It wasn't checking the preference before making that API call. Could make a bunch of people pretty angry.
2022-03-11 10:25:31 +01:00
Ghostkeeper
d778b539c2
Parse up to 16 extruders
...
CuraEngine supports up to 16, so we should allow at least that.
2022-03-11 10:13:44 +01:00
Casper Lamboo
addc5e36a7
Apply suggestions from code review
...
Co-authored-by: Jaime van Kessel <nallath@gmail.com>
2022-03-11 09:59:20 +01:00
Remco Burema
d2ab7d3d4d
Merge pull request #11633 from Ultimaker/CURA-9012_application_menu_fixes
...
Application menu fixes
2022-03-10 12:55:54 +01:00
Remco Burema
1445419406
Merge pull request #11634 from Ultimaker/CURA-9023_Fix_profile_page_uppdate_create_new
...
Profile page fixes
2022-03-10 12:47:47 +01:00
Tim Kuipers
30d5814f37
make defaults comply with parent default values
...
The parent settings have default values, which come out to different values than the old ones
when using the "value" function formula.
This commit sets the default values at the values as they are calculated from using 0.4mm line widths and 0.3mm min line widths.
2022-03-10 12:30:42 +01:00