Modix-Lazar
be61b45f30
Added Modix V4 machines
...
- Adding V4 machines
- Initial layer height set depending on nozzle diameter
- Z-hop set as 4x layer height
- V4 travel speed set to 350mm/sec
2022-11-09 19:35:47 +01:00
Modix3D
c50fc235c7
Merge branch 'Ultimaker:main' into master
2022-11-09 19:17:48 +01:00
Remco Burema
f75cb7a48b
Merge pull request #11678 from Ultimaker/brim_per_material_optimized_order
...
Brim overhaul: New features and bug fixes
2022-10-30 17:59:36 +01:00
Jaime van Kessel
5c18a37f60
Merge branch 'main' of github.com:Ultimaker/Cura into PP-251_create_annealing_intent
2022-10-26 11:28:58 +02:00
Remco Burema
ab51bd699e
Merge branch 'main' into brim_per_material_optimized_order
2022-10-25 17:31:13 +02:00
Rijk van Manen
d5020425bc
fix mistakes
...
PP-42
2022-10-17 15:55:03 +02:00
Rijk van Manen
7612faea79
make initial flow settings a fraction of the initial layer flow
...
PP-42
2022-10-17 14:51:05 +02:00
Rijk van Manen
9f6a47f04a
Merge branch 'main' into PP-42_improved_initial_layer_settings
2022-10-17 13:51:20 +02:00
Remco Burema
1e1ec7c6e5
For tree support default should be support wall count 1.
...
part of CURA-7800
2022-10-06 22:23:24 +02:00
Rijk van Manen
c90c7e688a
fix cool fan mistake
...
PP-42
2022-10-06 16:23:31 +02:00
Rijk van Manen
27d56d378e
improve initial layer settings
...
ultimaker.def.json is also cleaned and put in alphabetic order.
Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42
2022-10-06 16:11:04 +02:00
Paul Kuiper
f3b9c73d0f
Create a resolve function on the "support_enable" setting such that underlying extruders (and thus also intent profiles) can enable support.
...
Relates to PP-251
2022-10-05 21:03:17 +02:00
c.lamboo
b33cff33f5
Disable "Remove Raft Inside Corners" setting by default
2022-10-03 11:28:22 +02:00
c.lamboo
a2c85dced9
Revert "Enable zigzag instead of the lines paatern on the skin layers. This improves print speed and quality. I used to decrease bridging quality, but due to enabling experimental bridging in the print profiles this can now be used."
...
This reverts commit 863e1ecbae19644384e484cf88a3b4e0ae4a86aa.
2022-09-29 16:09:00 +02:00
Jaime van Kessel
d8f304ca49
Fix description of wall_x_material_flow_layer_0
...
CURA-9433
2022-09-20 14:13:00 +02:00
Jaime van Kessel
d64b07d11f
Revert "Pp 230 enable conical support ( #13295 )"
...
This reverts commit 47b414a4ae287311b7dba359de6b7eff9452b4cd.
2022-09-20 13:43:02 +02:00
Jaime van Kessel
ac804389f6
Apply suggestions from code review
...
CURA-9433
Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>
2022-09-19 17:18:09 +02:00
Jaime van Kessel
a53c9636af
Add initial layer flow settings
...
CURA-9433
2022-09-19 13:08:13 +02:00
goofoo3d
d6bc4067f9
Add some Renkforce Machines ( #12598 )
...
Add goofoo, renkforce printf
Co-authored-by: laiqiqi <laiqiqi886@163.com>
2022-09-16 10:14:03 +02:00
Jaime van Kessel
ceb5fe75cf
Update the settings for cremaker as suggested in #12511
2022-09-15 16:36:42 +02:00
Jaime van Kessel
3ac31f410f
Merge pull request #13222 from NOVAXIM/patch-1
...
Update anycubic_mega_zero.def.json
2022-09-15 16:19:31 +02:00
Jaime van Kessel
0ef0703e5a
Merge branch 'patch-1' of github.com:xPakrikx/Cura
2022-09-15 16:06:51 +02:00
Paul Kuiper
47b414a4ae
Pp 230 enable conical support ( #13295 )
...
Enable conical support settings for ultimaker profiles. Promote conical support out of experimental. Increase minimum diameter from 5 to 10mm.
Relates to PP-230 and CURA-6710
2022-09-15 14:43:28 +02:00
Jaime van Kessel
8b67041418
Remove unneeded overides from vivedino profile
2022-09-15 14:39:57 +02:00
Jaime van Kessel
1bd6a34c6b
Fix version number for vivedino printers
2022-09-15 14:34:06 +02:00
Jaime van Kessel
b5677714a7
Merge branch 'vivedino_add_printers' of github.com:jim-edwards/Cura
2022-09-15 14:30:14 +02:00
Jaime van Kessel
a76fa25caa
Merge branch 'PP-195_Improve_bridging' of github.com:Ultimaker/Cura
2022-09-15 14:00:01 +02:00
Jaime van Kessel
71d04b9cda
Fix codestyle formatting issue in ultimaker.def.json
2022-09-15 13:58:43 +02:00
Jaime van Kessel
0dea6d7cca
Merge branch 'PP-243-cleanup-raft-settings' of github.com:Ultimaker/Cura
2022-09-15 13:57:39 +02:00
Jaime van Kessel
e7c58c49dc
Merge branch 'main' of github.com:Naxecorp/Cura
2022-09-15 13:52:19 +02:00
Jaime van Kessel
487536c757
Put back the speed_wall_x for UM2+C
2022-09-14 13:58:55 +02:00
Jaime van Kessel
ee551e48b3
Restore incorrectly removed settings
...
Something went wrong here, it removed the wrong defaults...
2022-09-14 13:45:27 +02:00
Jordan
37615284e1
changed retraction amount from 0.5 to 0.2
2022-09-14 09:34:31 +02:00
Rijk van Manen
4b6763132c
keep default_value
2022-09-13 14:06:09 +02:00
Rijk van Manen
4712c6abc3
restructure raft airgap
...
No values are changed, but the settings are restructured. The PVA airgap is moved to fdm_materials. Inconsistent use of equations is also resolved. PP-243
2022-09-13 11:59:34 +02:00
Rijk van Manen
48c59099c8
increase fan speed over raft
...
The top surface of the raft is printed with default fan speed, while the base is printed with the fan off. PP-243
2022-09-13 11:27:18 +02:00
Rijk van Manen
179e6bdfb6
cleanup raft speeds
...
raft base speed is only 15mm/s to avoid extreme flows. The raft surface speed equals the top/bottom speed, so the raft surface has a flow equal to the top/bottom flow. The raft interface is again the average of the surface and the base. PP-243
2022-09-13 11:18:38 +02:00
Rijk van Manen
e4534943e7
new raft base thickness default
...
The new default of the raft base thickness is close to the current values. The limited thickness of 0.3mm is used to avoid extreme flowrate for 06 and 08 nozzle sizes. PP-243
2022-09-13 10:45:59 +02:00
Rijk van Manen
08a5f07d53
raft interface line spacing can follow default
...
This is a non critical setting, just follow the default defined in fdmprinter. PP-243
2022-09-13 10:33:28 +02:00
Rijk van Manen
96569edcf0
raft middle line width has new default
...
The raft middle line width is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
2022-09-13 10:27:05 +02:00
Rijk van Manen
257d37eb73
raft middle layer thickness has new default
...
The raft middle layer thickness is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
2022-09-13 10:20:40 +02:00
Rijk van Manen
834cc4129e
cleanup raft top layers
...
This commit does effectively change nothing. The default of 2 top layers is set in fdmprinter and it is made 1 for 08 cores. PP-342
2022-09-13 09:50:37 +02:00
Paul Kuiper
7d107b5e5c
Enable experimental bridge settings for all Ultimaker machines. Set bridge wall speed to equal to the skin speed such that all speeds around a bridge are approx. the same.
...
The mininimum bridge wall length was changed to a length long enough to prevent switching of settings over small unsupported areas (e.g. X/Y distance). This was changed in fdmprinters.def.json
Relates to PP-195
2022-09-13 09:47:43 +02:00
Rijk van Manen
e742a6afa8
set raft margin to default of 15mm
...
The raft margin is not a critical setting and for most profiles it resolves to 15mm currently, which is the default in fdmprinter. PP-243
2022-09-13 09:33:39 +02:00
jedwards
6950b9d332
Fix the Vivendio T-Rex meshes by using a single mesh for the T-Rex 2 and 3 (they are virtually the same dimensions anyways). Fix some of the mesh issues caused by the previous optimization and reduce the overall size.
2022-09-12 15:09:20 -07:00
Rijk van Manen
e64a48bc86
cleanup jerk settings
...
Variants: jerk_print = 25 for 0.8 cores
Intent: jerk_print = 30 for Draft/Engineering
PP-239
2022-09-08 16:28:36 +02:00
Jaime van Kessel
ba9d0f24a2
Merge pull request #13238 from Ultimaker/PP-29_Enable_zigzag_patterns
...
PP-29 use zigzag as top/bottom pattern
2022-09-08 15:31:25 +02:00
Jaime van Kessel
38496da592
Merge branch 'master' of github.com:jianshu-du/Cura
2022-09-08 14:21:44 +02:00
Christian Kvasny
018952a921
VzBot ( #13181 )
...
* Add VzBot printer
* remove exclude_materials
* Update vzbot_base.def.json
remove Unnecessary default_values
* rename duplicate profile ids
* Adjusted speed for TPU. Retract switched off
* update start/end gcode
* set retraction_amount to 0.65
* update gantry_height
* add custom overrides
2022-09-08 13:49:32 +02:00
Rijk van Manen
955a7be51d
Merge branch 'main' into PP-29_Enable_zigzag_patterns
2022-09-07 16:45:30 +02:00
