Instead of the minimum. So previously a value of 2 would make it spread the error over 2 walls for an even number, or 3 for an odd. Now it makes it spread the error over 2 walls for an even number or 1 for an odd. This means that the minimum allowed value becomes 2, because for an even wall count it needs to place the error somewhere.
Done as a 5 minute fix.
Conflicts:
resources/definitions/ultimaker2.def.json -> Additions in Arachne around a place where we fixed an enum setting.
resources/definitions/ultimaker3.def.json
resources/definitions/ultimaker_s3.def.json
resources/definitions/ultimaker_s5.def.json
This variable makes more sense to as a Ratio.
This was discussed during the eCCB 12/11/21
and implemented as a 5 min fix.
Note: The current default values were 0.5 there
is a new PR which change these 1.0. These values
should be multiplied with a 100
There is no theoretical or algorithmic limit here. We may warn the user, but not prevent them from changing it.
Done as a five minute fix. Fixes CURA-8693. Fixes#10736.
Conflicts:
resources/i18n/de_DE/fdmprinter.def.json.po -> German translations got some fixes in master while we also updated the new translations for 4.12.
From Smartling
- Chinese Simplified
- Dutch
- French
- German
- Italian
- Japanese
- Korean
- Portuguese
- Rusian
- Spanish
- Turkish
Contributes to CURA-8638
The global profiles weren't used because these printers don't have xyzprinting_base as their quality definition. And they can't use that because they do have different settings per printer in their quality profiles.
Instead it was using quality profiles from other materials, since those quality profiles, even though they were material-specific, were marked as global profiles.
Both of those issues are fixed now.
Contributes to issue CURA-8630.
It doesn't work for those patterns at the moment. For Gyroid it could be made to work. For Cross and Cross 3D it's a bit more difficult due to the pre-calculations and density image done for those.
Contributes to issue PP-55. Done as a 5 minute fix.
This prevents being able to align the text vertically with the troubleshooting button though. The text may become the larger of the two, in which case the text should be leading the height. Qt can do this with a Layout, however it then can't automatically adjust the width of the layout there since that would create a polish loop in the layout.
Contributes to issue CURA-8609.
Because with our default theme, the neutral icon is empty. This causes the alignment of the label next to it to appear off.
Contributes to issue CURA-8609.
It's moving there now. However if there are any errors syncing with the printers, the troubleshooting link has to disappear from there.
This makes the layout quite complex, since the icon on the left and the button on the right are no longer vertically centred. The text used to be vertically centred too, but can't do that any more since the text is not the determiner of the height any more, with there being a horizontally aligned button below it. It's all a bit complex now.
Contributes to issue CURA-8609.
Don't just use white rectangles or black text. Use the theme where appropriate. And these rectangles are just outlines.
Contributes to issue CURA-8609.
Conflicts:
cura/Machines/Models/MaterialManagementModel.py -> On Master we had temporarily reverted the action of this button because it became apparent that the sync wasn't going to be in 4.12. That revert is no longer necessary if this is merged.
These two have garnered some feedback in that it's wholly unclear what the sentences even mean. Hopefully this correction makes it more clear for next time.
Contributes to issue CURA-8638.
Two changes have been made:
- Use more consistent terminology for the top side of the model (which could be skin or walls). This is corrected from feedback by our translators.
- Don't add disclaimers about the infill density to this already way-too-long setting description. If anything, a disclaimer should be added to the infill density description that Gradual Infill and some infill patterns might not reach the desired density everywhere. But really, I think it's more in the domain of user documentation like the Ultimaker website or the Settings Guide.
