Ghostkeeper
cde67ab84c
Add warning for low Retraction Min Travel
...
Because if you set it to be too close to the line width, you'll get retractions between every skin line.
2018-02-26 14:48:43 +01:00
Ghostkeeper
91d271b993
Reset UM2+ PP profiles retraction minimum travel
...
These settings were set to be lower than the line width. I'm resetting them so that they will again be 2 times the line width. Otherwise we'll get retractions between every skin line which is really bad for PP.
Fixes #3171 .
2018-02-26 14:48:43 +01:00
Diego Prado Gesto
197508028a
Merge branch 'master' of github.com:Ultimaker/Cura
2018-02-26 14:03:14 +01:00
Diego Prado Gesto
f5b3775b7c
CURA-4966 When loading a project, check the quality in all the extruder stacks and replace with
...
the global quality if they don't match.
2018-02-26 14:01:43 +01:00
Aleksei S
6df4ad3f6d
Merge branch 'master' of github.com:Ultimaker/cura
2018-02-26 11:51:56 +01:00
Aleksei S
cd0846fad2
PostProcessing plugi, script Pause at Height redo layers
...
gives incorrect E-values
CURA-4670
2018-02-26 11:49:51 +01:00
Diego Prado Gesto
1f5d4e90c4
Merge branch 'CURA-4968_support_eraser_on_platform'
2018-02-26 11:28:20 +01:00
Ghostkeeper
6934c3f881
Use self.putValue to write g-code
...
Mostly as a test of this function. Seems to work.
2018-02-26 09:54:42 +01:00
Ghostkeeper
a7e1910711
Add E in the priority list
...
This way we're assured of the order in which these parameters occur, even though the firmware doesn't care about it. It's easier to read though.
2018-02-26 09:54:07 +01:00
Ghostkeeper
5160373580
Add helper function to write g-code lines
...
Requested during the post-processing script workshop that I was giving.
2018-02-26 09:43:10 +01:00
Ghostkeeper
d0cc9ba8a6
Remove debugging prints
2018-02-26 09:42:29 +01:00
Ghostkeeper
ce125a41a5
Merge branch 'feature_zigzag_all_infill'
2018-02-23 13:19:24 +01:00
Diego Prado Gesto
3c6e94ea81
CURA-4968 Add the support eraser cube to the bottom of the buildplate
...
when the automatic drop models preference is OFF
2018-02-23 13:08:15 +01:00
Diego Prado Gesto
94ca4fffe3
CURA-4946 In the gcode just store the default machine definition
2018-02-22 16:46:48 +01:00
Ghostkeeper
fc9b2c3529
Limit infill zigzaggify setting to infill extruder
...
Let's give it the same properties as the infill pattern setting.
Contributes to issue CURA-4017.
2018-02-22 16:44:39 +01:00
Ghostkeeper
dba748bd8a
Add new setting for zig-zaggifying support
...
You can now also use the zigzag type patterns for support.
Contributes to issue CURA-4017.
2018-02-22 16:43:50 +01:00
Aleksei S
2cfb7de25a
Merge branch 'master' of github.com:Ultimaker/cura
2018-02-21 14:55:19 +01:00
Aleksei S
3ed9ac1e83
Fix: Monitor icon state was not updated properly
...
CURA-4977
2018-02-21 14:54:05 +01:00
Ian Paschal
98a05ae483
Fixed typo ("coping" -> "copying")
2018-02-21 14:44:27 +01:00
Ian Paschal
fcff00e9da
Remove plugins from preferences since they're now managed via the plugin browser
2018-02-21 14:42:28 +01:00
Ghostkeeper
6110b83844
Use 'or' instead of '||' for Python code
...
Oops.
Contributes to issue CURA-4017.
2018-02-21 09:51:14 +01:00
Ghostkeeper
f3aeb01af0
Only enable Connect Infill Lines by default for Cross
...
We don't want to change the default behaviour yet.
Contributes to issue CURA-4017.
2018-02-21 08:50:49 +01:00
Ghostkeeper
31ad0dd56c
Allow zig-zaggifying infill for patterns other than Cross as well
...
It is now supported for any linear-based infill except zigzag (which has its own algorithm; that's a TODO).
Contributes to issue CURA-4017.
2018-02-21 08:50:49 +01:00
Ian Paschal
03265cb90a
CURA-4790 Removed "bold" property
2018-02-21 08:49:27 +01:00
Ian Paschal
767539b80b
CURA-4790 Changed light weights back to normal
2018-02-21 08:49:27 +01:00
Diego Prado Gesto
f27685e6ac
CURA-4017 Enable the setting zig_zagiffy_infill for the grid and triangular patterns
2018-02-20 13:56:30 +01:00
Ian Paschal
f6ff6fdcba
Merge pull request #3364 from Ultimaker/CURA-4790-lighter-weights
...
Cura 4790 lighter weights
2018-02-20 11:27:08 +01:00
Diego Prado Gesto
6b34f080ad
Merge branch 'master' of https://github.com/Ultimaker/Cura
2018-02-20 11:12:21 +01:00
Diego Prado Gesto
6af5a5d4bc
CURA-4946 When storing the gcode profile, the definition must be the
...
quality definition if the printer has_machine_quality. Otherwise the
fdmprinter definition must be used as a fallback. If there is no
quality_definition then the printer definition is use.
2018-02-20 11:11:21 +01:00
Ian Paschal
1bdd50e17f
CURA-4790 Removed "bold" property
2018-02-20 11:04:23 +01:00
Ian Paschal
c7f8044a32
CURA-4790 Changed light weights back to normal
2018-02-20 10:46:01 +01:00
Ian Paschal
481858c1b4
Merge pull request #3360 from Ultimaker/CURA-4790-lighter-weights
...
CURA-4790 Added weight properties to theme
2018-02-20 09:40:37 +01:00
Diego Prado Gesto
6a4f519238
Revert "CURA-4946 Add the quality_definition metadata entry to the gcode so when"
...
This reverts commit 744313af273ed34a5796d3970c3915f68abaedc7.
2018-02-20 09:30:05 +01:00
Ian Paschal
1d4d592d45
CURA-4790 Added weight properties to theme
2018-02-19 16:52:32 +01:00
Jaime van Kessel
7e8ee00e06
Merge branch 'master' of github.com:Ultimaker/Cura
2018-02-19 15:38:06 +01:00
Jaime van Kessel
3cf16fd34b
Removed sending of material profiles.
...
It takes a godawfull long time and the machine ignores most of them anyway.
2018-02-19 15:37:08 +01:00
fieldOfView
51062a4784
Add a button to open the configuration folder.
2018-02-19 15:30:39 +01:00
Aleksei S
8d98f20751
Merge branch 'master' of github.com:Ultimaker/cura
2018-02-19 15:05:16 +01:00
Aleksei S
1afe2668f7
Fix: Extreme small model was not automatically scaled.
2018-02-19 15:04:08 +01:00
Ian Paschal
438f11b2e6
CURA-4965 Custom / Duplicated Material's Build Plate Temperature returns to default
...
Holy hell that took a long time to figure out. Thanks @diegopradogesto!
2018-02-19 14:09:02 +01:00
Mark
9af6b4d6f6
Merge pull request #3264 from uBuild-3D/patch-1
...
Create ubuild-3d_mr_bot_280.def.json
2018-02-19 13:19:12 +01:00
Mark
3e7d7c4167
Merge pull request #3342 from probonopd/patch-4
...
Add AppImageKit to credits
2018-02-19 12:18:09 +01:00
Mark
2b70c83894
Merge pull request #3216 from dagoma3d/dagoma-profiles
...
Enhance Dagoma profiles
2018-02-19 12:12:23 +01:00
Jack Ha
823ac048fa
Merge branch 'master' of github.com:Ultimaker/Cura
2018-02-19 09:14:10 +01:00
Jack Ha
2c689ef03f
Log markup
2018-02-19 09:14:04 +01:00
probonopd
e55f2d0355
Update cura.po
2018-02-17 15:02:37 +01:00
probonopd
38502e6829
Update cura.pot
2018-02-17 14:59:58 +01:00
probonopd
c84ba800d3
Update AboutDialog.qml
2018-02-17 14:58:25 +01:00
probonopd
19eb37e612
Update AboutDialog.qml
2018-02-17 14:53:07 +01:00
Diego Prado Gesto
cc2cc2a751
Merge branch 'master' of https://github.com/Ultimaker/Cura
2018-02-16 14:02:20 +01:00
