c.lamboo
74678bf6fb
Bumb version for profiles
...
CURA-11526
2024-03-15 11:59:09 +01:00
c.lamboo
597fbb06a0
Revert "Bumb version in profiles"
...
This reverts commit 3aa32298dc54f734d4ddd4fc506fb94ea86e63a2.
2024-03-15 11:44:37 +01:00
c.lamboo
3aa32298dc
Bumb version in profiles
...
CURA-11526
2024-03-15 10:28:16 +01:00
HellAholic
0149be1228
Merge pull request #18466 from Ultimaker/CURA-9838_brim_location
...
Cura 9838 brim location
2024-03-08 13:32:41 +01:00
Frederic Meeuwissen
47a3d4ddbd
Improve top layer quality of TPU
...
Recommited from Paul's changes to resolve conflicts
2024-03-07 17:27:07 +01:00
Saumya Jain
ef1dfb6002
Merge branch 'main' into CURA-9838_brim_location
2024-03-05 10:51:58 +01:00
wawanbreton
87e119789c
Applied printer-linter format
2024-03-01 14:31:28 +00:00
Orel
5f8ea4abcb
Merge branch 'Ultimaker:main' into sigma_pro
2024-03-01 11:26:47 +01:00
Erwan MATHIEU
d7dbd13034
Finalized changing brim_outside_only to briml_location
...
CURA-9838
2024-02-29 12:00:28 +01:00
c.lamboo
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
...
This reverts commit 5a291f9ba9e83c85d1bdfe1c0e907e0df8154f6f.
2024-02-22 16:20:39 +01:00
Casper Lamboo
fa01ac419a
Merge branch 'main' into PP-393-ASA-PA12-CF-SR30-Profiles
2024-02-22 10:39:41 +01:00
Erwan MATHIEU
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
2024-02-16 09:11:34 +01:00
Erwan MATHIEU
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
2024-02-16 09:10:49 +01:00
wawanbreton
6c8ee8d98a
Applied printer-linter format
2024-02-16 08:05:52 +00:00
Erwan MATHIEU
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
2024-02-16 09:04:48 +01:00
Paul Kuiper
860dbaa4fe
Added experimental print profiles for the Method X and XL: ASA, Nylon12-CF and SR-30 support material.
...
PP-393
2024-02-13 11:32:58 +01:00
Jaime van Kessel
234a8115b9
Merge pull request #18269 from Ultimaker/PP-389-Increase_retraction-minimal-travel-distance
...
PP-389 Increase minimum retraction distance
2024-02-12 14:03:01 +01:00
Jaime van Kessel
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
...
PP-386 Increase part strength of high speed modes
2024-02-12 13:58:55 +01:00
Paul Kuiper
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
...
It also cleans up the settings.
PP-389
2024-02-08 16:20:02 +01:00
Paul Kuiper
4bb5eed97e
Bug fix: Do not sett the z distance for the AA0.8 cores of T-PLA.
...
PP-424
2024-02-06 10:57:25 +01:00
Paul Kuiper
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
...
PP-424
2024-02-05 11:35:44 +01:00
nallath
d490effcbd
Applied printer-linter format
2024-01-31 12:46:58 +00:00
Jaime van Kessel
0f0cf3e723
Merge pull request #17754 from Nu-hin/ratrig-squash
...
Add RatRig printers configurations
2024-01-31 13:45:48 +01:00
nallath
3793d4acbe
Applied printer-linter format
2024-01-31 12:38:21 +00:00
Jaime van Kessel
3b26c583c9
Merge branch 'main' of github.com:Ultimaker/Cura
2024-01-31 13:37:24 +01:00
Jaime van Kessel
c93848f884
Merge branch 'main' of https://github.com/Jeremie-C/CuraAdventurer
2024-01-31 13:31:31 +01:00
Paul Kuiper
18fabe468b
Increase part strength of high speed modes by compensating for the slip at high flow rates.
...
PP-386
2024-01-26 12:38:09 +01:00
Paul Kuiper
86d5c945d0
Add cool fan speed = 0 to the initial layer of Ultimaker ABS.
...
Fix high speed profile T-PLA (was still generic profile). Mistake in PP-391, but taken along in this PR.
PP-422
2024-01-22 11:42:30 +01:00
Paul Kuiper
5f3e49bdbf
Restore old z support formula.
...
PP-391
2024-01-18 13:48:14 +01:00
Paul Kuiper
80d5662a78
Regenerated from autogenerate
...
PP-391
2024-01-18 13:43:59 +01:00
Erwan MATHIEU
2f6080e9fe
Merge branch 'main' into PP-422-ABS-AA025-reduce-fanspeed
2024-01-18 08:35:13 +01:00
Paul Kuiper
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
...
PP-421
2024-01-17 13:24:34 +01:00
Paul Kuiper
16737dccf2
Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness.
...
PP-422
2024-01-10 10:02:46 +01:00
Remco Burema
c64dcb785c
Remove 'support_interface_skip_height' setting.
...
Was used for run-time efficiency, but it wasn't really ever set beyond one layer-height, which made it rather useless.
frontend part of CURA-11157 -- needed version upgrader as well, since it's the first alteration
2024-01-10 08:55:56 +01:00
Nikita Chernukhin
f6cc7993e1
Add RatRig printers configurations
...
Added configurations for the following RatRig printers:
* RatRig V-Core 3 (200mm, 300mm, 400mm and 500mm versions)
* RatRig V-Minion
V-Core 3.1 modification is also supported.
Bed meshes are taken from https://github.com/slic3r/slic3r-profiles with kind permission of the author @HelgeKeck
2024-01-05 16:46:40 +01:00
c.lamboo
4ce092837e
Merge branch '5.6'
...
# Conflicts:
# conanfile.py
2023-11-24 10:24:52 +01:00
Casper Lamboo
08f46fcff0
Merge pull request #17315 from Ultimaker/PP-399-Shrinkage-compensation-Method-materials
...
Shrinkage compensation method materials
2023-11-16 12:48:52 +01:00
Paul Kuiper
c089248625
- ABS-R print profiles for ABS-R with the 1C extruder
2023-11-16 09:12:24 +01:00
Jelle Spijker
efafe1503d
Merge branch '5.6'
...
# Conflicts:
# conanfile.py
# resources/definitions/ultimaker_methodx.def.json
# resources/definitions/ultimaker_methodxl.def.json
2023-11-15 13:53:39 +01:00
Paul Kuiper
c15e52399c
- Removed step correction from z shrinkage compensation for the Method X
...
- Changed step size tfrom 0.2mm to 0.203mm for Method X
- Added material compensations for ABS-R and ABS-CF
- New resolve formula in fdmprinter.def.json to not use the shrinkage factors of support materials
2023-11-14 14:32:42 +01:00
Casper Lamboo
2215b452b8
Merge pull request #17279 from Ultimaker/PP-387_Pillowing_PETG_AA08
...
Increase bridging flowrate on AA 0.8 at 0.2 layers
2023-11-13 09:59:32 +01:00
Frederic Meeuwissen
5f69c89309
Increase bridging flowrate on AA 0.8 at 0.2 layers
2023-11-10 14:24:44 +01:00
Casper Lamboo
6c481bb54e
Merge pull request #17240 from Ultimaker/CURA-11277_rename_LABS_extruder
...
[CURA-11277] Rename Method Lab extruder to LABS
2023-11-06 14:13:27 +01:00
Casper Lamboo
cc86f6ad4d
Merge pull request #17194 from Ultimaker/PP-387_Pillowing_PETG_AA08
...
Set bridging flow to 200 for PETG AA08 02
2023-11-06 13:45:59 +01:00
Erwan MATHIEU
26f472c0a2
Rename Method Lab extruder to LABS
...
CURA-11277
2023-11-06 12:07:09 +01:00
Erwan MATHIEU
5eb5387237
Merge remote-tracking branch 'origin/5.6'
2023-11-03 14:12:29 +01:00
Paul Kuiper
f9dcb89d3e
- Bug fix: raft_air_gap -> raft_airgap
...
- Larger prime tower foot (6->10mm)
- RapidRinse: disable fan and small area temperature = print temeprature
2023-11-03 13:19:12 +01:00
Frederic Meeuwissen
d0f1641c4b
Set bridging flow to 200 for PETG AA08 02
...
Increase flow during bridging to prevent stretching and breaking the thread
2023-11-03 10:04:43 +01:00
Saumya Jain
3029e30d85
Merge branch 'main' into definitions/neptune4pro
2023-11-01 11:22:19 +01:00
pkuiper-ultimaker
8fa6cd2f77
Applied printer-linter format
2023-10-31 16:11:56 +00:00
