The PrintWindow still used an old style combobox.
This resulted in a Mac user not being able to specify
which clustered printer he wanted to send a slice to.
Using the new QtQuick.Controls and specifically setting
the currentIndex fixed it for Mac.
Although the ExpandablePopup already sets the anchors of the `headerItem` to account for the arrow icon on the right side, the ConfigurationMenu's extruder row was ignoring it, thus making the elided text of the last extruder to overlap with the arrow icon a bit.
This commit fixes that by explicitly accounting for the width of the arrow in the extruders row.
**Note:** if the Cura window gets resized way too much, the extruder icons will still overlap with the arrow, since there is no space to fit everything.
CURA-8496
A style had to be prepended in the text to make sure that it adheres to the style we want instead of using the OS-based link style.
Note: For some reason QML ignores all other link-style tags (such as `a:hover`, `a:focus` etc) apart from `a:link`, so we can only change the style for the normal link and NOT for when it is clicked or hovered.
CURA-8380
When the labels were getting truncated and invisible after reducing the width of Cura's window, their visibility wasn't being restored back and, as a result, the `materialTypeLabel` was the only one that was remaining visible, even if there was enough space for the full `materialBrandColorTypeLabel`.
Changing the ColumnLayout to a Column, where the width is inherited from the parent, fixes that issue.
CURA-8496
Saw this and wanted to take it along blindly with whatever next modification I made to Cura. However I need to switch branches now so it's just going to be a rather useless commit I guess.
This was causing some files to be just over the limit of file length when given the default printer name on some operating systems. Some file systems, especially encrypted ones, have strict limitations for the maximum length of a file name. With percent-encoding and the extension and postfix we add to these file names, this could go over the limit in file name length for some operating systems.
Easy fix is to slightly shorten the name, at least to remove those brackets.
Done as a 5 minute fix.
Both the `preferredWidth` AND the `width` need to be set for the labels to be properly elided if there is no more room in the ColumnLayout. In addition, the ColumnLayout that contains the variants and material names needs to be visible only if width>0, otherwise when the width is negative, for some reason the `materialTypeLabel` appears again.
CURA-8496
Both the "Manage printer" and the "Manage in browser" button were using the `openPrintJobControlPanel()` function, which was wrong. This is now fixed so that the "Manage printer" will use the `openPrinterControlPanel()` function as it should've in the first place.
The deprecated icon "pencil" was being mapped to the new icon "Pencil" which is actually called "Pen".
This commit also replaces tabs with spaces in the deprecated_icons.json.
Fixes CURA-8488
While testing I noticed that the movement after the pause will
first move the head down and then move to the position before
the pause. This could result in noticeable artifacts or
accidentally push thin towers from the bed.) See the code below.
```gcode
;TYPE:CUSTOM
;added code by post processing
;script: PauseAtHeight.py
;current z: 5
;current height: 5.0
M83 ; switch to relative E values for any needed retraction
G1 F300 Z6 ; move up a millimeter to get out of the way
G1 F9000 X190 Y190
G1 F300 Z20.0
M84 E0
@pause now change filament and press ; Do the actual pause
G1 F300 Z5
G1 F9000 X30.759 Y30.759
G1 F1800 ; restore extrusion feedrate
```
I have switched the lines in the script such that it will first move to the correct X, Y and then move down
```python
prepend_gcode += self.putValue(G = 1, X = x, Y = y, F = 9000) + "\n"
prepend_gcode += self.putValue(G = 1, Z = current_z, F = 300) + "\n"
```
As shown in the code below
```gcode
;TYPE:CUSTOM
;added code by post processing
;script: PauseAtHeight.py
;current z: 5
;current height: 5.0
M83 ; switch to relative E values for any needed retraction
G1 F300 Z6 ; move up a millimeter to get out of the way
G1 F9000 X190 Y190
G1 F300 Z20.0
M84 E0
@pause now change filament and press ; Do the actual pause
G1 F9000 X30.759 Y30.759
G1 F300 Z5
G1 F1800 ; restore extrusion feedrate
```
It was not being displayed with Qt 5.15 due to the following error:
MaterialsView.qml:34:5: Unable to assign QStringList to QString
This is correct. And it should not just concatenate all of these material names; it should add a comma between them for human-readable display in the text label above the button.
Fixes#10235.
