7407 Commits

Author SHA1 Message Date
Lipu Fei
db1c6e4163 Merge pull request #1649 from Ultimaker/fix_setting_speed
Fix delays when settings change from error to valid
2017-04-04 14:33:44 +02:00
Arjen Hiemstra
7015702832 Add a change timer to perform the error state checking
This pulls the checkStackHaveErrors code out of the critical path when
editing settings, instead moving it to be handled later. This greatly
reduces the delay that happens when editing settings.

Fixes CURA-3653
Contributes to #1631
2017-04-04 13:39:18 +02:00
Ghostkeeper
28555c685f
Add profiles for 0.8mm ABS and CPE
These profiles are not optimised yet. I'm not allowed to optimise them since there seem to be bugs in the optimisation.
2017-04-04 11:23:46 +02:00
Ghostkeeper
a127d463bc
Add Japanese and Hangul to the language drop-down
These are partial translations at the moment, and normally we don't allow them in the drop-down then. But this is an exception, orders from higher up.

Contributes to issue CURA-3487.
2017-04-04 09:04:45 +02:00
Ghostkeeper
eab7741711
Add Japanese and Korean partial translations
Normally we don't allow partial translations in here, but this came from higher up: Ultimaker's distributors in Korea and Japan. We're making an exception for those.

Contributes to issue CURA-3487.
2017-04-04 09:02:53 +02:00
Ghostkeeper
1bcc19987d
Add Uranium CMake dir if it is set
Contributes to issue CURA-3487.
2017-04-03 17:17:04 +02:00
Ghostkeeper
b0ecb3ecdf
Unoptimize CPE+, PC and TPU profiles
There have been some problems in the optimization of these profiles, so we undo this for now, preventing people from editing these materials and risking some warnings in Cura's interface, but providing the correct experience for people trying the new materials.
2017-04-03 11:37:48 +02:00
Ghostkeeper
1968f5e1e0
Disable bed temperature instead of making it invisible
The visible property doesn't exist any more in favour of the enabled property.
2017-04-03 10:34:34 +02:00
Lipu Fei
08071c3aa5 Fix batched GCode compression
CURA-3604
2017-03-31 12:11:11 +02:00
Jaime van Kessel
4fe80218bc Merge pull request #1609 from Ultimaker/bugfix_CURA-3604
CURA-3604 Fix batched gcode compression for "print over network"
2017-03-31 09:32:16 +02:00
Lipu Fei
74e9ee0ab7 Fix batched gcode compression for "print over network"
CURA-3604
2017-03-30 19:00:41 +02:00
Jaime van Kessel
5bbdd9fe4b Merge branch '2.5' of github.com:Ultimaker/Cura into 2.5 2017-03-30 17:00:04 +02:00
Jaime van Kessel
06fff748e3 Decreased the size of the batches to send, as it froze the interface too much. 2017-03-30 16:59:35 +02:00
Jaime van Kessel
7ae8d96775 Simply reset the authentication when requesting a new one.
Only changing the state caused a whole lot of issues.
2017-03-30 16:47:08 +02:00
Jack Ha
76c1c31cf4 Merge branch '2.5' of github.com:Ultimaker/Cura into 2.5 2017-03-30 16:27:19 +02:00
Jaime van Kessel
e2faaf56fd Merge branch 'bugfix_CURA-3604_print_adter_loading_gcode' of github.com:Ultimaker/Cura into 2.5 2017-03-30 16:26:16 +02:00
Lipu Fei
bfd77f915d Compress gcode lines in batch
CURA-3604
2017-03-30 16:09:17 +02:00
Lipu Fei
c785e84b86 Check len(materialLengths) before using
CURA-3604
2017-03-30 16:09:16 +02:00
Lipu Fei
ef666aac88 Set gcode_list for Scene after loading gcode
CURA-3604
2017-03-30 16:09:16 +02:00
Lipu Fei
2158826e06 Change backend state to disabled after reading a gcode
CURA-3604
2017-03-30 16:09:16 +02:00
Jaime van Kessel
6314d872e1 If we find multiple materials for a new extruder, prefer a read only material
CURA-3147
2017-03-30 16:07:26 +02:00
Jack Ha
fa7a026efe Merge branch '2.5' of github.com:Ultimaker/Cura into 2.5 2017-03-30 16:05:07 +02:00
Jack Ha
da5288ea78 Fix updating allowed areas. CURA-3610 2017-03-30 16:04:57 +02:00
Jaime van Kessel
cd5e883010 Build volume now uses IsSlicable decorator to check for scene changes
CURA-3608 Fixes #1598
2017-03-30 11:24:01 +02:00
Jaime van Kessel
f7bbb243b8 Moved authentication request state change 2017-03-30 11:02:56 +02:00
Jaime van Kessel
13561bdb46 material_amounts is now defined in init
Somehow this was forgotten, which could cause issues in certain cases.

CURA-3617
2017-03-30 10:47:11 +02:00
Jack Ha
0655771cb8 Removed comment. CURA-3390 2017-03-29 11:00:59 +02:00
Jack Ha
d5d265a996 Resolve mc cherry-picking CURA-3390 2017-03-29 11:00:54 +02:00
Jack Ha
02bb575ced Fixed extruder per gcode layer. Created show_caution preference for gcode reader. CURA-3390 2017-03-29 10:56:36 +02:00
Jack Ha
1e75c84662 Less yields for G-code reader and faster. CURA-3390 2017-03-29 10:56:28 +02:00
Jack Ha
ea0c55fff1 Solved merge conflict in cherry-pick CURA-3390 2017-03-29 10:56:26 +02:00
Jack Ha
fb2c318a0a Added caution message for g-code reader. CURA-3390 2017-03-29 10:53:25 +02:00
Jaime van Kessel
fbc372812c Minor refactor to improve readability
CURA-3390
2017-03-29 10:51:56 +02:00
jack
3a255b341f Merge pull request #1586 from fieldOfView/fix_radius0
Fix crash when editing material diameter
2017-03-29 10:43:41 +02:00
Ghostkeeper
6bf3d084b9
Update translation templates
These are generated from the state of the code at commit b67b41653fc7c24061103993016fb29b86a51488.

Contributes to issue CURA-3487.
2017-03-29 09:31:01 +02:00
Tim Kuipers
db2766aba1 fix: move prime positions to the sides (CURA-3605) 2017-03-28 12:53:46 +02:00
Jaime van Kessel
910ff7acea No longer check printer state when no material lengths are known
This fixes issues with g-code from g-code reader not having material lengths set.

CURA-3604
2017-03-28 11:59:07 +02:00
Jaime van Kessel
6367755875 Disabled center_on_select for windows, as pyqt has a bug with it 2017-03-28 10:21:52 +02:00
Ghostkeeper
b67b41653f
Fix spelling of maximum skin angle expansion description 2017-03-27 15:59:27 +02:00
Lipu Fei
6644a4d386 Revert "Prevent MachineSettings dialog go beyond the top of screen"
This reverts commit a0f841e8eb2e3fc41a5d053232ea29cf538e30be.
2017-03-27 11:09:40 +02:00
Jack Ha
088202c366 Changed all Not Supported Draft quality profiles to Not Supported Superdraft to prevent double Not Supported entries. CURA-3555 2017-03-27 10:30:51 +02:00
fieldOfView
33f20710d9 Ups the limit of the maximum cost of a spool of filament
This is necessary for currencies such as Japanese Yen or South Korean Won, where prices can easily exceed 1000. This PR sets the limit to 100,000,000. If the price of a spool exceeds this amount, perhaps the user should consider moving to a more stable country.

Fixes https://github.com/Ultimaker/Cura/issues/1567
2017-03-24 11:23:40 +01:00
Lipu Fei
578f72c91e Use "False" instead "false" in cfg files
CURA-3555
2017-03-24 10:44:44 +01:00
Jaime van Kessel
ecbf0e1e28 Only add center to list for merge if there is one 2017-03-23 15:14:34 +01:00
Lipu Fei
a0f841e8eb Prevent MachineSettings dialog go beyond the top of screen 2017-03-23 13:46:01 +01:00
Lipu Fei
96e9780273 Fix typo in changelog 2.5.0 2017-03-23 08:53:57 +01:00
Lipu Fei
fa7dc3a708 Use onActivated for profile override combobox 2017-03-22 16:01:50 +01:00
Lipu Fei
e35d276e25 Complete Changelog for 2.5.0
CURA-3467
2017-03-22 15:20:57 +01:00
Jack Ha
33d16f8601 Added Not Supported profiles when second extruder is a 0.8 nozzle. CURA-3555 2017-03-22 14:51:53 +01:00
Jack Ha
79ea09d616 Merge branch '2.5' of github.com:Ultimaker/Cura into 2.5 2017-03-22 13:24:21 +01:00