15622 Commits

Author SHA1 Message Date
HellAholic
f1bb3414c7
Merge pull request #13110 from WEEDO3DTECH/main
Add  some WEEDO  printers
2024-07-02 09:30:07 +02:00
HellAholic
1ff17e6bc2
Merge pull request #19283 from Ultimaker/CURA-11937_fix_initial_move_through_model
CURA-11937 Default layer start position to machine_extruder start position
2024-07-02 09:15:03 +02:00
HellAholic
346ea887dc Applied printer-linter format 2024-07-02 07:10:52 +00:00
HellAholic
181d9d9df9
Merge branch 'main' into main 2024-07-01 22:53:00 +02:00
HellAholic
5394830caa
Merge branch 'main' into CURA-11937_fix_initial_move_through_model 2024-07-01 16:55:33 +02:00
Erwan MATHIEU
f7a3b48bcd Fix Creality profiles
This should have been caught before the PR was merged...
2024-07-01 15:40:24 +02:00
HellAholic
57e0fdd6d5 Merge branch 'main' into CURA-11937_fix_initial_move_through_model 2024-07-01 14:48:21 +02:00
Erwan MATHIEU
f8ce168442
Merge branch 'main' into main 2024-07-01 10:57:07 +02:00
HellAholic
8f12d58d5d
Merge pull request #19167 from Ultimaker/PP-485-0.15mm-profiles-PVA-and-BAM
0.15mm modes for the factor 4 for PVA and BAM.
2024-06-28 15:48:48 +02:00
HellAholic
5f49492735
Merge pull request #19244 from Ultimaker/PP-429-Improve-PVA-support-printing
Improve PVA printing reliability
2024-06-28 14:51:13 +02:00
HellAholic
9e87221604
Merge pull request #19187 from Ultimaker/PP-488-Improve-overhang-quality-TPLA
Improve overhang quality T-PLA 0.2mm engineering mode
2024-06-28 14:36:08 +02:00
nallath
298bd49737 Applied printer-linter format 2024-06-27 12:48:12 +00:00
Vadim Danilchik
e3daeecce4
Add Creality Ender 3 V3 KE definition and nozzles (#17519)
* Add Creality Ender 3 V3 KE definition and nozzles
* fixed code review comment
* added more values from creality print config
* changed initial layer line width
* fixed line width

---------

Co-authored-by: Erwan MATHIEU <erwan.mathieu@ultimaker.com>
Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>
Co-authored-by: c.lamboo <casperlamboo@gmail.com>
Co-authored-by: Jelle Spijker <jelle.spijker@ultimaker.com>
Co-authored-by: Saumya Jain <70144862+saumyaj3@users.noreply.github.com>
2024-06-27 14:47:18 +02:00
HellAholic
248d1539f4
Merge pull request #19227 from Ultimaker/CURA-11947_improve_multimaterial_raft
CURA-11947 Improve multimaterial raft
2024-06-27 11:32:55 +02:00
HellAholic
f780862a4e
Merge pull request #19266 from Ultimaker/PP-333-Remove-Sketch-profiles
Remove Sketch machine for Cura 5.8 release
2024-06-27 11:08:40 +02:00
wawanbreton
6b0e492dff Applied printer-linter format 2024-06-25 15:12:08 +00:00
Erwan MATHIEU
0d805df711 Set layer_start_x/y to a safer value
Also remove all the definitions that had exactly this value as an override.

CURA-11947
2024-06-25 17:09:51 +02:00
Erwan MATHIEU
9ae9debfc3 Rename setting from layer_0 to initial
CURA-11947
2024-06-25 16:55:28 +02:00
Erwan MATHIEU
539cd8b306 Replace "first" by "initial" in setting label and description
CURA-11947
2024-06-25 13:48:37 +02:00
Erwan MATHIEU
675c2caaba Default layer start position to machine_extruder start position
CURA-11937
2024-06-25 11:33:07 +02:00
Erwan MATHIEU
fb46ee550b
Merge branch 'main' into CURA-11947_improve_multimaterial_raft 2024-06-21 13:51:30 +02:00
Erwan MATHIEU
cd40d51564 Merge remote-tracking branch 'origin/main' into CURA-11947_improve_multimaterial_raft 2024-06-21 09:25:21 +02:00
Paul Kuiper
0675ec43be Remove Sketch machine for Cura 5.8 release.
PP-333
2024-06-21 09:14:51 +02:00
Paul Kuiper
a235bef965 Remove Sketch machine for Cura 5.8 release.
PP-333
2024-06-21 08:26:10 +02:00
Erwan MATHIEU
b70e2aac4c
Merge branch 'main' into PP-476-Make-PPS-CF-a-bundled-package 2024-06-20 15:46:25 +02:00
Erwan MATHIEU
6476bce50d Add settings to customize raft infill overlap 2024-06-19 13:53:46 +02:00
Remco Burema
e2ed9c6930
Merge branch 'main' into CURA-9474_non_vertex_seams 2024-06-18 14:08:11 +02:00
Paul Kuiper
262b6f1458 Improve PVA printing reliability. Increase linewidth at first layer, enable prime tower, increase print speed PVA.
PP-429
2024-06-17 15:19:52 +02:00
Erwan MATHIEU
1f1412d8b3 Add settings to customize raft layers adhesion
CURA-11947
2024-06-13 13:40:34 +02:00
Erwan MATHIEU
db3e0bd894 Add setting to customize support first layer
CURA-11947
2024-06-13 13:01:53 +02:00
HellAholic
49984b620e
Merge branch 'main' into CURA-8076_seam_avoid_overhangs 2024-06-13 11:19:50 +02:00
Erwan MATHIEU
6d1233b48b Add settings to customize raft flow
CURA-11947
2024-06-13 10:47:30 +02:00
Erwan MATHIEU
772692250f
Merge branch 'main' into 5.7-merge-to-main 2024-06-12 12:02:35 +02:00
Remco Burema
f7e298db65 Split overhang angle w.r.t. seams off from overhang angle.
part of CURA-8076
2024-06-11 15:12:55 +02:00
Remco Burema
f60e714a59 Split overhang angle w.r.t. seams off from overhang angle.
part of CURA-8076
2024-06-11 15:04:59 +02:00
Erwan MATHIEU
110c13b130
Merge branch 'main' into main 2024-06-11 12:56:58 +02:00
Justin F. Hallett
5cfb3dbf7f
Add DraftShift Design Voron2 based StealthChanger profiles 2024-06-07 15:49:09 -06:00
Remco Burema
faa2b46a31 Make z-seam on non-vertex positions posible.
For user-specified and shortest at least.

part of CURA-9474
2024-06-05 14:58:21 +02:00
Paul Kuiper
e1d64b4fc6 Reduce the build plate, build volume and print temperature of the T-PLA 0.2mm engineering mode with 5C to improve the overhang quality. Strength and dimensional accuarcy were not affected by this change.
PP-488
2024-06-05 10:01:47 +02:00
Max Heinekamp
b2f1e80cb3 Removed duplicate entry
There were two entries defining "secondary_button_text".
Kept the one near other secondary_button etires and set it to the "text_secondary_button" base color.
2024-06-01 20:47:52 +02:00
Erwan MATHIEU
a34a442009 Add dedicated conandata.yml for cura_resources 2024-05-31 14:58:58 +02:00
Erwan MATHIEU
11f2be15f4
Updated Changelog for Cura 5.7.2 2024-05-30 09:54:47 +02:00
wawanbreton
219543dd43 Applied printer-linter format 2024-05-30 07:19:37 +00:00
Erwan MATHIEU
e863eee156 Disable wait for temperature for UltiMaker printers
Previously the material_print_temp_prepend and material_print_temp_wait were ignored for Griffin-flavored printers. Now we do handle them because we want the prepend, but we don't want the wait so disable it.
2024-05-30 09:18:08 +02:00
Erwan MATHIEU
a3d70e9429 Allow setting interleaved prime tower base on material
CURA-11931
2024-05-27 16:26:26 +02:00
Paul Kuiper
8815f52f2a New 0.15mm mode for the factor 4 for PVA and BAM.
Needed by 0.15mm 3rd party material profiles that require support.

PP-485
2024-05-24 11:54:38 +02:00
HellAholic
1e69f4740b
Merge pull request #19089 from Ultimaker/CURA-11912
Change `value` to `resolve`
2024-05-23 10:43:54 +02:00
c.lamboo
86ccddbb1d Change value to resolve
CURA-11912
2024-05-22 16:51:08 +02:00
HellAholic
328af077e5
Merge pull request #19029 from Ultimaker/CURA-11777-yeet-sketch-to-makerbot
Cura 11777 yeet sketch to makerbot
2024-05-17 10:43:55 +02:00
c.lamboo
0d017f725a Change value to resolve
CURA-11912
2024-05-17 09:56:49 +02:00