Ghostkeeper
2d9b2216a3
Allow printing support roof and bottom with different extruders
...
Note that currently the support_interface_extruder_nr is still used by the engine for some things and therefore the build volume calculations may not be 100% correct. I'll fix that up soon.
Contributes to issue CURA-3491.
2017-03-17 15:55:18 +01:00
Tim Kuipers
35516ccc45
JSON fix: tetrehedral infill line distance was wrong (CURA-3474)
...
the infill line distance in the frontend is the average line distance, not the line distance between two lines which are equidistant
2017-03-17 15:05:01 +01:00
Ghostkeeper
8de0bd60c7
Split support inerface line width into roof and bottom
...
This way you can change them separately.
Contributes to issue CURA-3491.
2017-03-17 15:02:44 +01:00
Ghostkeeper
3e464964db
Split support interface density into roof/bottom
...
Each has its own line distance setting. The original support interface line distance is no longer used then.
Contributes to issue CURA-3491.
2017-03-17 14:47:17 +01:00
Lipu Fei
8e77d212f7
Remove "Save All" and add "Save As" MenuItem
...
CURA-3496
2017-03-17 14:31:22 +01:00
Ghostkeeper
cdaeb13c3a
Use support infill density instead of line distance
...
Making these profiles use line distance prevents the user from setting their own density. This density is exactly equivalent.
Contributes to issue CURA-3491.
2017-03-17 13:29:15 +01:00
Ghostkeeper
933ca70890
Add separate settings for support roof/bottom jerk
...
You can now tune them separately.
Contributes to issue CURA-3491.
2017-03-17 11:29:33 +01:00
Ghostkeeper
d33c8e8436
Fix spelling of support interface acceleration descriptions
...
My own copy-paste mistake here.
Contributes to issue CURA-3491.
2017-03-17 11:24:10 +01:00
Ghostkeeper
65daa86fb0
Add separate settings for support roof and bottom acceleration
...
You can now tune them separately.
Contributes to issue CURA-3491.
2017-03-17 11:14:48 +01:00
Ghostkeeper
250995611a
Fix typo in Support Interface Acceleration
...
Contributes to issue CURA-3491.
2017-03-17 11:14:02 +01:00
Ghostkeeper
c15e70a6a6
Make support bottom speed description more accurate
...
It doesn't affect overhang really.
Contributes to issue CURA-3491.
2017-03-17 11:13:30 +01:00
Ghostkeeper
03ae298389
Add support roof and bottom speeds
...
They can now be separately adjusted instead of just support interface.
Contributes to issue CURA-3491.
2017-03-17 10:43:01 +01:00
Ghostkeeper
ab3d2e3570
Fix typo in support interface description
...
Contributes to issue CURA-3491.
2017-03-17 10:41:27 +01:00
austin-makeit
8cd5c8bb69
Update makeit_pro_m
2017-03-16 15:50:54 -07:00
austin-makeit
918c5e1254
Update makeit_pro_l
2017-03-16 15:49:35 -07:00
austin-makeit
2a0137156b
Merge pull request #2 from austin-makeit/patch-1
...
Patch 1
2017-03-16 15:45:34 -07:00
austin-makeit
8418c6b39b
Create makeit_l_dual_2nd
2017-03-16 15:43:02 -07:00
austin-makeit
2523630455
Create makeit_l_dual_1st
2017-03-16 15:42:48 -07:00
austin-makeit
499f1998ca
Create makeit_dual_2nd
2017-03-16 15:42:35 -07:00
austin-makeit
b5cc2b7059
Create makeit_dual_1st
2017-03-16 15:42:18 -07:00
austin-makeit
e4d32db873
Merge pull request #1 from austin-makeit/patch-2
...
Create MAKEiT definitions and extruders
2017-03-16 15:41:01 -07:00
austin-makeit
179919d14c
Create makeit_pro_m
2017-03-16 15:33:13 -07:00
austin-makeit
d0ce717add
Create makeit_pro_l
2017-03-16 15:30:42 -07:00
Jaime van Kessel
d52515d57d
Added invert zoom preference option
2017-03-16 19:06:57 +01:00
Jack Ha
ff77571300
Merge branch '2.5'
2017-03-16 16:01:33 +01:00
Jack Ha
aa691033e0
Added Not Supported profiles for incompatible materials. CURA-3510
2017-03-16 16:01:18 +01:00
Lipu Fei
e00c68344a
CURA-3495 open project/models in one dialog
2017-03-16 13:37:06 +01:00
Lipu Fei
ea16f967d7
Fix code styling
2017-03-16 13:37:06 +01:00
Jaime van Kessel
a7b5879263
Merge branch '2.5' of github.com:Ultimaker/Cura
2017-03-16 13:18:41 +01:00
Jaime van Kessel
efce0696bd
Recently activated material can no longer be removed
...
CURA-3147
2017-03-16 13:11:51 +01:00
Tim Kuipers
36420070fa
JSOn fix: more description on support_bottom_stair_step_height (CURA-3380)
2017-03-16 13:02:50 +01:00
Jaime van Kessel
134425db90
Merge branch '2.5' of github.com:Ultimaker/Cura
2017-03-16 11:27:54 +01:00
Jaime van Kessel
1f734d5245
Disabled the start_layers_at_same_position setting
2017-03-16 11:21:08 +01:00
Jaime van Kessel
6da6ae1b9e
start_x and start_y are now settable per extruder
2017-03-16 11:19:44 +01:00
Jaime van Kessel
5bcfba0f17
Revert "removal: remove start_layers_at_same_position; it is now mandatory to start each layer near the given position (CURA-3339)"
...
This reverts commit 1482c27b21fb45819d2a400ede937662f34870ed.
2017-03-16 11:16:55 +01:00
Jaime van Kessel
ad7752bb16
Revert "Updated version of superdraft and verydraft. CURA-3479"
...
This reverts commit 62de4f9ec6d65c3224c57a9cfcb6b9ec888d6487.
2017-03-16 11:16:02 +01:00
Jaime van Kessel
0c1829af1e
Revert "Upgrade built-in instance containers"
...
This reverts commit b162be4df8c12c89112ba558136e87b63e67e713.
2017-03-16 11:15:20 +01:00
Tim Kuipers
9302f4e9c6
JSON feat: support_bottom_stair_step_width (CURA-3380)
2017-03-16 11:14:53 +01:00
Tim Kuipers
999e59be66
fix: can now insert negative mold angle values (CURA-3512)
2017-03-15 16:21:42 +01:00
Tim Kuipers
09855bc21c
fix: 90 mold angle now possible (CURA-3512)
2017-03-15 15:12:08 +01:00
Jack Ha
f918a978b2
Fixed extruder per gcode layer. Created show_caution preference for gcode reader. CURA-3390
2017-03-15 14:29:59 +01:00
Jaime van Kessel
6cc0bd893f
Save as now defaults to 3mf
...
CURA-3496
2017-03-15 09:57:50 +01:00
Jaime van Kessel
48cba91b16
Merge branch 'master' of github.com:Ultimaker/Cura
2017-03-15 09:27:08 +01:00
Jaime van Kessel
138c3db26f
Preferred mimetype is now used when saving to local or removable drive
...
CURA-3496
2017-03-15 09:23:47 +01:00
Ghostkeeper
c52649a91f
Merge branch 'patch-3' of https://github.com/probonopd/Cura into probonopd-patch-3
2017-03-15 09:13:33 +01:00
Jack Ha
132b6aa9d7
Merge branch '2.5'
2017-03-15 09:10:49 +01:00
probonopd
9dbb7fcc15
Update as per discussion in https://github.com/Ultimaker/Cura/pull/1350
2017-03-14 18:31:58 +01:00
jack
284e620da2
Merge pull request #1531 from Ultimaker/feature_version_upgrade_2.5
...
Version Upgrade 2.4 to 2.5
2017-03-14 16:05:43 +01:00
jack
056c9dd362
Merge pull request #1532 from Ultimaker/feature_version_upgrade_2.5_tests
...
Version Upgrade 2.4 to 2.5 tests
2017-03-14 16:05:36 +01:00
MaukCC
35c0f3ca74
Update cartesio.def.json
2017-03-14 15:05:20 +01:00
