We need the raft thickness to determine the maximum height of the model. If using multiple interface layers, this height should be reduced.
Contributes to issue CURA-8915.
Material shrinkage now alters both the disallowed areas+, and the blue wireframe, toghether repressenting the usable build-volume. This doesn't shrink the build-plate/printer model, still keeping in line with the 'show the size of the result object in Prepare, not the resized one we do print becasue it will shrink later' principle we had originally agreed on enough. Note that the disallowed areas also take the object themzelves into account, so the user could still tell when objects are going to be printed overlapped (as the dissalowed areas of those respective models then overlap -- but not, of course, the models themselves).
part of CURA-8083
These are for our testers to be able to test the new message types. Later they will be added to all messages that need them.
Contributes to issue CURA-7278.
It seems people edit definitions to remove all vertices. This causes Cura to crash because of the calculation of disallowed areas.
Fixes Sentry issue CURA-2FY.
It needs to use the double brim size, as it needs to ensure that
it has enough room for it's own brim and any object brim.
The resolution of the circle is increased so that the shadow matches
more with what is actually being printed
CURA-7643
Converted doxygen style comments to reStructuredText style in the files found in Cura/cura directory using the script dox_2_rst.py (provided in the Uranium repo). Comments were manually checked and changed if needed.
Subtract the thickness of the walls from this setting. This most likely ends up negative and thus not counting because it's maxed with something that starts at 0.
I've also simplified this algorithm a bit. Easier to follow if you ask me.
Done as a 5 minute fix.
It doesn't affect the build volume, since we don't need to move the prime blob disallowed area. It is projected onto the build plate after all.
Most likely this won't affect anyone since the prime Z position is a machine setting that can't normally be modified. But hey, it's a bit more precise anyway.
Found during work on the Settings Guide.
Turns out that the artificial disallowed area around the inside of the
build volume was necessary to take the brim into account when deciding
whether a model was outside the buildvolume.
The issue for which I removed this in the first place seems not to be
an issue anymore due to other commits
Reverts and e5fb9fb8 and e5c9bca
CURA-6522
Also fix unnecessary emitting of switching extruder tabs.
This should improve performance a lot. I tested a lot of things and am convinced that it didn't break anything. But the automated GUI tests and QA team should be the final arbiters of that...
Contributes to issue CURA-6793.
